linux/drivers/iio/dummy
Greg Kroah-Hartman 35ea984dac Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle.
The big one here is the configfs support which has been a long time in the
 works but should allow for cleaner ways to do instantiation of those elements
 of IIO that aren't directly connected to specific hardware. Lots of cool new
 stuff we can use this for in the works!
 
 New core stuff (basically all configfs support related)
 * Configfs support
   - Core support (was waiting for a configfs patch that went in around 4.4rc2)
   - A little fixlet to add a configfs.h to contain a reference to the
     configfs_subsystem structure.
 * Some infrastructure to simplify handling of software based triggers
   (i.e. ones with no actual hardware associated with them)
 * A high resolution timer based trigger.  This has been around for years
     but until the configfs support was ready we didn't have a sensible way
     of instantiating instances of it (the method used for the sysfs_trigger
     has never been really satisfactory)
 
 New Device Support
 * AMS iAQ Volatile Organic Compounds sensor support.
 * Freescale imx7d ADC driver
 * Maxim MAX30100 oximeter driver (note that for these devices most of the
   smart stuff will be in userspace - effectively they are just light sensors
   with some interesting led synchronization as far as the kernel is concerned).
 * Microchip mcp3421 support added to the mcp3422 driver.
 * TI adc124s021 support added to the adc128s052 driver.
 * TI ina219, inda226 power monitors. Note that there is an existing hwmon driver
   for these parts, the usecase is somewhat different so it is unclear at this
   point if the hwmon driver will eventually be replaced by a bridge from
   this driver.  In the meantime the Kconfig dependencies should prevent both
   from being built.
 
 New driver functionality
 * us8152d power management support.
 
 Cleanups, fixups
 * Use list_for_each_entry_safe instead of list_for_each_safe with the entry
   bit coded longhand.
 * Select IRQ_WORK for IIO_DUMMY_EVGEN.  This is a fix that somehow got lost
   when the driver was moved so lets do it again.
 * st-accel - drop an unused define.
 * vz89x, lidar - optimize i2c transactions by using a single i2c tranfers
   instead of multiple calls where supported (fall back to smbus calls as
   before if not).
 * Use dev_get_platdata() in staging drivers: tsl2x7x, adcs and frequency
   drivers instead of direct access to the structure element.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWbX6IAAoJEFSFNJnE9BaI6E4QAIvGXHn4ew8ZH+IF3UP+n47C
 WWtgeh7dEvhqpmXN3eWVo9bxA1JdwbE4/purWttszoJjzqowT0qAt6PuIUME+Md4
 3jOQ41Sc99YjttIwkLpWTqq3H5c3Tn3q9guZ3Imiz9rmpgHRePQ8aatMGUpOp53m
 AEY5JQHqCoWHLMEbEy/5w8RJdNf3cy3Re4kjtwrtp7CMynC4ob7dKE7kcZRvywEw
 6m4hVOQusLvygg1j235czwBDnf79qYOo96z93Pk/auQlqKX3ce/7yQW3GXvWl97a
 8FOmse3FNzX3jwWHELOdAZWIQSLBSqP9N4716qa4orVSihzqAZQ5CSEBPB0r2LS2
 cgK4BL6+xjDkwXn9ui4FiyLdUeUjz/zRhvwFZdjwP63hGf5n9ggZO3RuVslc6/8z
 DOHY5mLdg8CFlMlZUCnCc+1BjU8lgf90+a46Vx4ACJJiqIJrvNRxRKGQZyY/C9sO
 O8h0Ep5mWovcK1+SWdQSsfxdcWcdb0nJFG/VQeJVxMeJR+5mD5lCYmIj5xFkOxJU
 WP9xm+7rsCqSPW+vp8hlY3EWunIQB4gWROvLzWCTS2bKW7B12t1UapLZBrI1f6vK
 JuqHrjKkK7RBRAEldKz6cWCToEaHE+I/k+uIRhlp0of2IPEvGpnm3NoPN1XH3RID
 9boPy/eHuShq8EVg0WUt
 =54PR
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.5b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle.

The big one here is the configfs support which has been a long time in the
works but should allow for cleaner ways to do instantiation of those elements
of IIO that aren't directly connected to specific hardware. Lots of cool new
stuff we can use this for in the works!

New core stuff (basically all configfs support related)
* Configfs support
  - Core support (was waiting for a configfs patch that went in around 4.4rc2)
  - A little fixlet to add a configfs.h to contain a reference to the
    configfs_subsystem structure.
* Some infrastructure to simplify handling of software based triggers
  (i.e. ones with no actual hardware associated with them)
* A high resolution timer based trigger.  This has been around for years
    but until the configfs support was ready we didn't have a sensible way
    of instantiating instances of it (the method used for the sysfs_trigger
    has never been really satisfactory)

New Device Support
* AMS iAQ Volatile Organic Compounds sensor support.
* Freescale imx7d ADC driver
* Maxim MAX30100 oximeter driver (note that for these devices most of the
  smart stuff will be in userspace - effectively they are just light sensors
  with some interesting led synchronization as far as the kernel is concerned).
* Microchip mcp3421 support added to the mcp3422 driver.
* TI adc124s021 support added to the adc128s052 driver.
* TI ina219, inda226 power monitors. Note that there is an existing hwmon driver
  for these parts, the usecase is somewhat different so it is unclear at this
  point if the hwmon driver will eventually be replaced by a bridge from
  this driver.  In the meantime the Kconfig dependencies should prevent both
  from being built.

New driver functionality
* us8152d power management support.

Cleanups, fixups
* Use list_for_each_entry_safe instead of list_for_each_safe with the entry
  bit coded longhand.
* Select IRQ_WORK for IIO_DUMMY_EVGEN.  This is a fix that somehow got lost
  when the driver was moved so lets do it again.
* st-accel - drop an unused define.
* vz89x, lidar - optimize i2c transactions by using a single i2c tranfers
  instead of multiple calls where supported (fall back to smbus calls as
  before if not).
* Use dev_get_platdata() in staging drivers: tsl2x7x, adcs and frequency
  drivers instead of direct access to the structure element.
2015-12-26 17:03:33 -08:00
..
iio_dummy_evgen.c
iio_dummy_evgen.h
iio_simple_dummy_buffer.c
iio_simple_dummy_events.c
iio_simple_dummy.c
iio_simple_dummy.h
Kconfig
Makefile