mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 04:54:41 +08:00
844a4f0d8a
Depending on the regulator version, the voltage table might be different. Use version specific regulator tables in order to select correct voltage table. For the following regulator versions different voltage tables are now used: * TPS658623: Use correct voltage table for SM2 * TPS658643: New voltage table for SM2 Both versions are in use on the Colibri T20 module. Make use of the correct tables by requesting the correct SM2 voltage of 1.8V. This change is not backward compatible since an old driver is not able to correctly set that value. The value 1.8V is out of range for the old driver and will refuse to probe the device. The regulator starts with default settings and the driver shows appropriate error messages. On Colibri T20, the old value used to work with TPS658623 since the driver applied a wrong voltage table too. However, the TPS658643 used on V1.2 devices uses yet another voltage table and those broke that pseudo-compatibility. The regulator driver now has the correct voltage table for both regulator versions and those the correct voltage can be used in the device tree. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
501 lines
14 KiB
C
501 lines
14 KiB
C
/*
|
|
* Regulator driver for TI TPS6586x
|
|
*
|
|
* Copyright (C) 2010 Compulab Ltd.
|
|
* Author: Mike Rapoport <mike@compulab.co.il>
|
|
*
|
|
* Based on da903x
|
|
* Copyright (C) 2006-2008 Marvell International Ltd.
|
|
* Copyright (C) 2008 Compulab Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/mfd/tps6586x.h>
|
|
|
|
/* supply control and voltage setting */
|
|
#define TPS6586X_SUPPLYENA 0x10
|
|
#define TPS6586X_SUPPLYENB 0x11
|
|
#define TPS6586X_SUPPLYENC 0x12
|
|
#define TPS6586X_SUPPLYEND 0x13
|
|
#define TPS6586X_SUPPLYENE 0x14
|
|
#define TPS6586X_VCC1 0x20
|
|
#define TPS6586X_VCC2 0x21
|
|
#define TPS6586X_SM1V1 0x23
|
|
#define TPS6586X_SM1V2 0x24
|
|
#define TPS6586X_SM1SL 0x25
|
|
#define TPS6586X_SM0V1 0x26
|
|
#define TPS6586X_SM0V2 0x27
|
|
#define TPS6586X_SM0SL 0x28
|
|
#define TPS6586X_LDO2AV1 0x29
|
|
#define TPS6586X_LDO2AV2 0x2A
|
|
#define TPS6586X_LDO2BV1 0x2F
|
|
#define TPS6586X_LDO2BV2 0x30
|
|
#define TPS6586X_LDO4V1 0x32
|
|
#define TPS6586X_LDO4V2 0x33
|
|
|
|
/* converter settings */
|
|
#define TPS6586X_SUPPLYV1 0x41
|
|
#define TPS6586X_SUPPLYV2 0x42
|
|
#define TPS6586X_SUPPLYV3 0x43
|
|
#define TPS6586X_SUPPLYV4 0x44
|
|
#define TPS6586X_SUPPLYV5 0x45
|
|
#define TPS6586X_SUPPLYV6 0x46
|
|
#define TPS6586X_SMODE1 0x47
|
|
#define TPS6586X_SMODE2 0x48
|
|
|
|
struct tps6586x_regulator {
|
|
struct regulator_desc desc;
|
|
|
|
int enable_bit[2];
|
|
int enable_reg[2];
|
|
};
|
|
|
|
static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
|
|
{
|
|
return rdev_get_dev(rdev)->parent;
|
|
}
|
|
|
|
static struct regulator_ops tps6586x_regulator_ops = {
|
|
.list_voltage = regulator_list_voltage_table,
|
|
.map_voltage = regulator_map_voltage_ascend,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
};
|
|
|
|
static struct regulator_ops tps6586x_sys_regulator_ops = {
|
|
};
|
|
|
|
static const unsigned int tps6586x_ldo0_voltages[] = {
|
|
1200000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
|
|
};
|
|
|
|
static const unsigned int tps6586x_ldo4_voltages[] = {
|
|
1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
|
|
1900000, 1925000, 1950000, 1975000, 2000000, 2025000, 2050000, 2075000,
|
|
2100000, 2125000, 2150000, 2175000, 2200000, 2225000, 2250000, 2275000,
|
|
2300000, 2325000, 2350000, 2375000, 2400000, 2425000, 2450000, 2475000,
|
|
};
|
|
|
|
#define tps658623_sm2_voltages tps6586x_ldo4_voltages
|
|
|
|
static const unsigned int tps6586x_ldo_voltages[] = {
|
|
1250000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
|
|
};
|
|
|
|
static const unsigned int tps6586x_sm2_voltages[] = {
|
|
3000000, 3050000, 3100000, 3150000, 3200000, 3250000, 3300000, 3350000,
|
|
3400000, 3450000, 3500000, 3550000, 3600000, 3650000, 3700000, 3750000,
|
|
3800000, 3850000, 3900000, 3950000, 4000000, 4050000, 4100000, 4150000,
|
|
4200000, 4250000, 4300000, 4350000, 4400000, 4450000, 4500000, 4550000,
|
|
};
|
|
|
|
static const unsigned int tps658643_sm2_voltages[] = {
|
|
1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000,
|
|
1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000,
|
|
1425000, 1450000, 1475000, 1500000, 1525000, 1550000, 1575000, 1600000,
|
|
1625000, 1650000, 1675000, 1700000, 1725000, 1750000, 1775000, 1800000,
|
|
};
|
|
|
|
static const unsigned int tps6586x_dvm_voltages[] = {
|
|
725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000,
|
|
925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
|
|
1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
|
|
1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
|
|
};
|
|
|
|
#define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \
|
|
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
|
|
.desc = { \
|
|
.supply_name = _pin_name, \
|
|
.name = "REG-" #_id, \
|
|
.ops = &tps6586x_regulator_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = TPS6586X_ID_##_id, \
|
|
.n_voltages = ARRAY_SIZE(vdata##_voltages), \
|
|
.volt_table = vdata##_voltages, \
|
|
.owner = THIS_MODULE, \
|
|
.enable_reg = TPS6586X_SUPPLY##ereg0, \
|
|
.enable_mask = 1 << (ebit0), \
|
|
.vsel_reg = TPS6586X_##vreg, \
|
|
.vsel_mask = ((1 << (nbits)) - 1) << (shift), \
|
|
.apply_reg = (goreg), \
|
|
.apply_bit = (gobit), \
|
|
}, \
|
|
.enable_reg[0] = TPS6586X_SUPPLY##ereg0, \
|
|
.enable_bit[0] = (ebit0), \
|
|
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
|
|
.enable_bit[1] = (ebit1),
|
|
|
|
#define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \
|
|
ereg0, ebit0, ereg1, ebit1) \
|
|
{ \
|
|
TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
|
|
ereg0, ebit0, ereg1, ebit1, 0, 0) \
|
|
}
|
|
|
|
#define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \
|
|
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
|
|
{ \
|
|
TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
|
|
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
|
|
}
|
|
|
|
#define TPS6586X_SYS_REGULATOR() \
|
|
{ \
|
|
.desc = { \
|
|
.supply_name = "sys", \
|
|
.name = "REG-SYS", \
|
|
.ops = &tps6586x_sys_regulator_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = TPS6586X_ID_SYS, \
|
|
.owner = THIS_MODULE, \
|
|
}, \
|
|
}
|
|
|
|
static struct tps6586x_regulator tps6586x_regulator[] = {
|
|
TPS6586X_SYS_REGULATOR(),
|
|
TPS6586X_LDO(LDO_0, "vinldo01", tps6586x_ldo0, SUPPLYV1, 5, 3, ENC, 0,
|
|
END, 0),
|
|
TPS6586X_LDO(LDO_3, "vinldo23", tps6586x_ldo, SUPPLYV4, 0, 3, ENC, 2,
|
|
END, 2),
|
|
TPS6586X_LDO(LDO_5, "REG-SYS", tps6586x_ldo, SUPPLYV6, 0, 3, ENE, 6,
|
|
ENE, 6),
|
|
TPS6586X_LDO(LDO_6, "vinldo678", tps6586x_ldo, SUPPLYV3, 0, 3, ENC, 4,
|
|
END, 4),
|
|
TPS6586X_LDO(LDO_7, "vinldo678", tps6586x_ldo, SUPPLYV3, 3, 3, ENC, 5,
|
|
END, 5),
|
|
TPS6586X_LDO(LDO_8, "vinldo678", tps6586x_ldo, SUPPLYV2, 5, 3, ENC, 6,
|
|
END, 6),
|
|
TPS6586X_LDO(LDO_9, "vinldo9", tps6586x_ldo, SUPPLYV6, 3, 3, ENE, 7,
|
|
ENE, 7),
|
|
TPS6586X_LDO(LDO_RTC, "REG-SYS", tps6586x_ldo, SUPPLYV4, 3, 3, V4, 7,
|
|
V4, 7),
|
|
TPS6586X_LDO(LDO_1, "vinldo01", tps6586x_dvm, SUPPLYV1, 0, 5, ENC, 1,
|
|
END, 1),
|
|
TPS6586X_LDO(SM_2, "vin-sm2", tps6586x_sm2, SUPPLYV2, 0, 5, ENC, 7,
|
|
END, 7),
|
|
|
|
TPS6586X_DVM(LDO_2, "vinldo23", tps6586x_dvm, LDO2BV1, 0, 5, ENA, 3,
|
|
ENB, 3, TPS6586X_VCC2, BIT(6)),
|
|
TPS6586X_DVM(LDO_4, "vinldo4", tps6586x_ldo4, LDO4V1, 0, 5, ENC, 3,
|
|
END, 3, TPS6586X_VCC1, BIT(6)),
|
|
TPS6586X_DVM(SM_0, "vin-sm0", tps6586x_dvm, SM0V1, 0, 5, ENA, 1,
|
|
ENB, 1, TPS6586X_VCC1, BIT(2)),
|
|
TPS6586X_DVM(SM_1, "vin-sm1", tps6586x_dvm, SM1V1, 0, 5, ENA, 0,
|
|
ENB, 0, TPS6586X_VCC1, BIT(0)),
|
|
};
|
|
|
|
static struct tps6586x_regulator tps658623_regulator[] = {
|
|
TPS6586X_LDO(SM_2, "vin-sm2", tps658623_sm2, SUPPLYV2, 0, 5, ENC, 7,
|
|
END, 7),
|
|
};
|
|
|
|
static struct tps6586x_regulator tps658643_regulator[] = {
|
|
TPS6586X_LDO(SM_2, "vin-sm2", tps658643_sm2, SUPPLYV2, 0, 5, ENC, 7,
|
|
END, 7),
|
|
};
|
|
|
|
/*
|
|
* TPS6586X has 2 enable bits that are OR'ed to determine the actual
|
|
* regulator state. Clearing one of this bits allows switching
|
|
* regulator on and of with single register write.
|
|
*/
|
|
static inline int tps6586x_regulator_preinit(struct device *parent,
|
|
struct tps6586x_regulator *ri)
|
|
{
|
|
uint8_t val1, val2;
|
|
int ret;
|
|
|
|
if (ri->enable_reg[0] == ri->enable_reg[1] &&
|
|
ri->enable_bit[0] == ri->enable_bit[1])
|
|
return 0;
|
|
|
|
ret = tps6586x_read(parent, ri->enable_reg[0], &val1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tps6586x_read(parent, ri->enable_reg[1], &val2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(val2 & (1 << ri->enable_bit[1])))
|
|
return 0;
|
|
|
|
/*
|
|
* The regulator is on, but it's enabled with the bit we don't
|
|
* want to use, so we switch the enable bits
|
|
*/
|
|
if (!(val1 & (1 << ri->enable_bit[0]))) {
|
|
ret = tps6586x_set_bits(parent, ri->enable_reg[0],
|
|
1 << ri->enable_bit[0]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return tps6586x_clr_bits(parent, ri->enable_reg[1],
|
|
1 << ri->enable_bit[1]);
|
|
}
|
|
|
|
static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev,
|
|
int id, struct regulator_init_data *p)
|
|
{
|
|
struct device *parent = pdev->dev.parent;
|
|
struct tps6586x_settings *setting = p->driver_data;
|
|
uint8_t reg;
|
|
|
|
if (setting == NULL)
|
|
return 0;
|
|
|
|
if (!(setting->slew_rate & TPS6586X_SLEW_RATE_SET))
|
|
return 0;
|
|
|
|
/* only SM0 and SM1 can have the slew rate settings */
|
|
switch (id) {
|
|
case TPS6586X_ID_SM_0:
|
|
reg = TPS6586X_SM0SL;
|
|
break;
|
|
case TPS6586X_ID_SM_1:
|
|
reg = TPS6586X_SM1SL;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Only SM0/SM1 can set slew rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return tps6586x_write(parent, reg,
|
|
setting->slew_rate & TPS6586X_SLEW_RATE_MASK);
|
|
}
|
|
|
|
static struct tps6586x_regulator *find_regulator_info(int id, int version)
|
|
{
|
|
struct tps6586x_regulator *ri;
|
|
struct tps6586x_regulator *table = NULL;
|
|
int num;
|
|
int i;
|
|
|
|
switch (version) {
|
|
case TPS658623:
|
|
table = tps658623_regulator;
|
|
num = ARRAY_SIZE(tps658623_regulator);
|
|
break;
|
|
case TPS658643:
|
|
table = tps658643_regulator;
|
|
num = ARRAY_SIZE(tps658643_regulator);
|
|
break;
|
|
}
|
|
|
|
/* Search version specific table first */
|
|
if (table) {
|
|
for (i = 0; i < num; i++) {
|
|
ri = &table[i];
|
|
if (ri->desc.id == id)
|
|
return ri;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tps6586x_regulator); i++) {
|
|
ri = &tps6586x_regulator[i];
|
|
if (ri->desc.id == id)
|
|
return ri;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct of_regulator_match tps6586x_matches[] = {
|
|
{ .name = "sys", .driver_data = (void *)TPS6586X_ID_SYS },
|
|
{ .name = "sm0", .driver_data = (void *)TPS6586X_ID_SM_0 },
|
|
{ .name = "sm1", .driver_data = (void *)TPS6586X_ID_SM_1 },
|
|
{ .name = "sm2", .driver_data = (void *)TPS6586X_ID_SM_2 },
|
|
{ .name = "ldo0", .driver_data = (void *)TPS6586X_ID_LDO_0 },
|
|
{ .name = "ldo1", .driver_data = (void *)TPS6586X_ID_LDO_1 },
|
|
{ .name = "ldo2", .driver_data = (void *)TPS6586X_ID_LDO_2 },
|
|
{ .name = "ldo3", .driver_data = (void *)TPS6586X_ID_LDO_3 },
|
|
{ .name = "ldo4", .driver_data = (void *)TPS6586X_ID_LDO_4 },
|
|
{ .name = "ldo5", .driver_data = (void *)TPS6586X_ID_LDO_5 },
|
|
{ .name = "ldo6", .driver_data = (void *)TPS6586X_ID_LDO_6 },
|
|
{ .name = "ldo7", .driver_data = (void *)TPS6586X_ID_LDO_7 },
|
|
{ .name = "ldo8", .driver_data = (void *)TPS6586X_ID_LDO_8 },
|
|
{ .name = "ldo9", .driver_data = (void *)TPS6586X_ID_LDO_9 },
|
|
{ .name = "ldo_rtc", .driver_data = (void *)TPS6586X_ID_LDO_RTC },
|
|
};
|
|
|
|
static struct tps6586x_platform_data *tps6586x_parse_regulator_dt(
|
|
struct platform_device *pdev,
|
|
struct of_regulator_match **tps6586x_reg_matches)
|
|
{
|
|
const unsigned int num = ARRAY_SIZE(tps6586x_matches);
|
|
struct device_node *np = pdev->dev.parent->of_node;
|
|
struct device_node *regs;
|
|
const char *sys_rail = NULL;
|
|
unsigned int i;
|
|
struct tps6586x_platform_data *pdata;
|
|
int err;
|
|
|
|
regs = of_get_child_by_name(np, "regulators");
|
|
if (!regs) {
|
|
dev_err(&pdev->dev, "regulator node not found\n");
|
|
return NULL;
|
|
}
|
|
|
|
err = of_regulator_match(&pdev->dev, regs, tps6586x_matches, num);
|
|
of_node_put(regs);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "Regulator match failed, e %d\n", err);
|
|
return NULL;
|
|
}
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "Memory alloction failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
for (i = 0; i < num; i++) {
|
|
int id;
|
|
if (!tps6586x_matches[i].init_data)
|
|
continue;
|
|
|
|
pdata->reg_init_data[i] = tps6586x_matches[i].init_data;
|
|
id = (int)tps6586x_matches[i].driver_data;
|
|
if (id == TPS6586X_ID_SYS)
|
|
sys_rail = pdata->reg_init_data[i]->constraints.name;
|
|
|
|
if ((id == TPS6586X_ID_LDO_5) || (id == TPS6586X_ID_LDO_RTC))
|
|
pdata->reg_init_data[i]->supply_regulator = sys_rail;
|
|
}
|
|
*tps6586x_reg_matches = tps6586x_matches;
|
|
return pdata;
|
|
}
|
|
#else
|
|
static struct tps6586x_platform_data *tps6586x_parse_regulator_dt(
|
|
struct platform_device *pdev,
|
|
struct of_regulator_match **tps6586x_reg_matches)
|
|
{
|
|
*tps6586x_reg_matches = NULL;
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static int tps6586x_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct tps6586x_regulator *ri = NULL;
|
|
struct regulator_config config = { };
|
|
struct regulator_dev **rdev;
|
|
struct regulator_init_data *reg_data;
|
|
struct tps6586x_platform_data *pdata;
|
|
struct of_regulator_match *tps6586x_reg_matches = NULL;
|
|
int version;
|
|
int id;
|
|
int err;
|
|
|
|
dev_dbg(&pdev->dev, "Probing regulator\n");
|
|
|
|
pdata = dev_get_platdata(pdev->dev.parent);
|
|
if ((!pdata) && (pdev->dev.parent->of_node))
|
|
pdata = tps6586x_parse_regulator_dt(pdev,
|
|
&tps6586x_reg_matches);
|
|
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "Platform data not available, exiting\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
rdev = devm_kzalloc(&pdev->dev, TPS6586X_ID_MAX_REGULATOR *
|
|
sizeof(*rdev), GFP_KERNEL);
|
|
if (!rdev) {
|
|
dev_err(&pdev->dev, "Mmemory alloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
version = tps6586x_get_version(pdev->dev.parent);
|
|
|
|
for (id = 0; id < TPS6586X_ID_MAX_REGULATOR; ++id) {
|
|
reg_data = pdata->reg_init_data[id];
|
|
|
|
ri = find_regulator_info(id, version);
|
|
|
|
if (!ri) {
|
|
dev_err(&pdev->dev, "invalid regulator ID specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = tps6586x_regulator_preinit(pdev->dev.parent, ri);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"regulator %d preinit failed, e %d\n", id, err);
|
|
return err;
|
|
}
|
|
|
|
config.dev = pdev->dev.parent;
|
|
config.init_data = reg_data;
|
|
config.driver_data = ri;
|
|
|
|
if (tps6586x_reg_matches)
|
|
config.of_node = tps6586x_reg_matches[id].of_node;
|
|
|
|
rdev[id] = devm_regulator_register(&pdev->dev, &ri->desc,
|
|
&config);
|
|
if (IS_ERR(rdev[id])) {
|
|
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
|
ri->desc.name);
|
|
return PTR_ERR(rdev[id]);
|
|
}
|
|
|
|
if (reg_data) {
|
|
err = tps6586x_regulator_set_slew_rate(pdev, id,
|
|
reg_data);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev,
|
|
"Slew rate config failed, e %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, rdev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver tps6586x_regulator_driver = {
|
|
.driver = {
|
|
.name = "tps6586x-regulator",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = tps6586x_regulator_probe,
|
|
};
|
|
|
|
static int __init tps6586x_regulator_init(void)
|
|
{
|
|
return platform_driver_register(&tps6586x_regulator_driver);
|
|
}
|
|
subsys_initcall(tps6586x_regulator_init);
|
|
|
|
static void __exit tps6586x_regulator_exit(void)
|
|
{
|
|
platform_driver_unregister(&tps6586x_regulator_driver);
|
|
}
|
|
module_exit(tps6586x_regulator_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
|
|
MODULE_DESCRIPTION("Regulator Driver for TI TPS6586X PMIC");
|
|
MODULE_ALIAS("platform:tps6586x-regulator");
|