mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-06 02:24:14 +08:00
0f0d7e7b02
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
362 lines
9.9 KiB
C
362 lines
9.9 KiB
C
/*
|
|
* Marvell EBU SoC Device Bus Controller
|
|
* (memory controller for NOR/NAND/SRAM/FPGA devices)
|
|
*
|
|
* Copyright (C) 2013-2014 Marvell
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* Register definitions */
|
|
#define ARMADA_DEV_WIDTH_SHIFT 30
|
|
#define ARMADA_BADR_SKEW_SHIFT 28
|
|
#define ARMADA_RD_HOLD_SHIFT 23
|
|
#define ARMADA_ACC_NEXT_SHIFT 17
|
|
#define ARMADA_RD_SETUP_SHIFT 12
|
|
#define ARMADA_ACC_FIRST_SHIFT 6
|
|
|
|
#define ARMADA_SYNC_ENABLE_SHIFT 24
|
|
#define ARMADA_WR_HIGH_SHIFT 16
|
|
#define ARMADA_WR_LOW_SHIFT 8
|
|
|
|
#define ARMADA_READ_PARAM_OFFSET 0x0
|
|
#define ARMADA_WRITE_PARAM_OFFSET 0x4
|
|
|
|
#define ORION_RESERVED (0x2 << 30)
|
|
#define ORION_BADR_SKEW_SHIFT 28
|
|
#define ORION_WR_HIGH_EXT_BIT BIT(27)
|
|
#define ORION_WR_HIGH_EXT_MASK 0x8
|
|
#define ORION_WR_LOW_EXT_BIT BIT(26)
|
|
#define ORION_WR_LOW_EXT_MASK 0x8
|
|
#define ORION_ALE_WR_EXT_BIT BIT(25)
|
|
#define ORION_ALE_WR_EXT_MASK 0x8
|
|
#define ORION_ACC_NEXT_EXT_BIT BIT(24)
|
|
#define ORION_ACC_NEXT_EXT_MASK 0x10
|
|
#define ORION_ACC_FIRST_EXT_BIT BIT(23)
|
|
#define ORION_ACC_FIRST_EXT_MASK 0x10
|
|
#define ORION_TURN_OFF_EXT_BIT BIT(22)
|
|
#define ORION_TURN_OFF_EXT_MASK 0x8
|
|
#define ORION_DEV_WIDTH_SHIFT 20
|
|
#define ORION_WR_HIGH_SHIFT 17
|
|
#define ORION_WR_HIGH_MASK 0x7
|
|
#define ORION_WR_LOW_SHIFT 14
|
|
#define ORION_WR_LOW_MASK 0x7
|
|
#define ORION_ALE_WR_SHIFT 11
|
|
#define ORION_ALE_WR_MASK 0x7
|
|
#define ORION_ACC_NEXT_SHIFT 7
|
|
#define ORION_ACC_NEXT_MASK 0xF
|
|
#define ORION_ACC_FIRST_SHIFT 3
|
|
#define ORION_ACC_FIRST_MASK 0xF
|
|
#define ORION_TURN_OFF_SHIFT 0
|
|
#define ORION_TURN_OFF_MASK 0x7
|
|
|
|
struct devbus_read_params {
|
|
u32 bus_width;
|
|
u32 badr_skew;
|
|
u32 turn_off;
|
|
u32 acc_first;
|
|
u32 acc_next;
|
|
u32 rd_setup;
|
|
u32 rd_hold;
|
|
};
|
|
|
|
struct devbus_write_params {
|
|
u32 sync_enable;
|
|
u32 wr_high;
|
|
u32 wr_low;
|
|
u32 ale_wr;
|
|
};
|
|
|
|
struct devbus {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
unsigned long tick_ps;
|
|
};
|
|
|
|
static int get_timing_param_ps(struct devbus *devbus,
|
|
struct device_node *node,
|
|
const char *name,
|
|
u32 *ticks)
|
|
{
|
|
u32 time_ps;
|
|
int err;
|
|
|
|
err = of_property_read_u32(node, name, &time_ps);
|
|
if (err < 0) {
|
|
dev_err(devbus->dev, "%s has no '%s' property\n",
|
|
name, node->full_name);
|
|
return err;
|
|
}
|
|
|
|
*ticks = (time_ps + devbus->tick_ps - 1) / devbus->tick_ps;
|
|
|
|
dev_dbg(devbus->dev, "%s: %u ps -> 0x%x\n",
|
|
name, time_ps, *ticks);
|
|
return 0;
|
|
}
|
|
|
|
static int devbus_get_timing_params(struct devbus *devbus,
|
|
struct device_node *node,
|
|
struct devbus_read_params *r,
|
|
struct devbus_write_params *w)
|
|
{
|
|
int err;
|
|
|
|
err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
|
|
if (err < 0) {
|
|
dev_err(devbus->dev,
|
|
"%s has no 'devbus,bus-width' property\n",
|
|
node->full_name);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* The bus width is encoded into the register as 0 for 8 bits,
|
|
* and 1 for 16 bits, so we do the necessary conversion here.
|
|
*/
|
|
if (r->bus_width == 8)
|
|
r->bus_width = 0;
|
|
else if (r->bus_width == 16)
|
|
r->bus_width = 1;
|
|
else {
|
|
dev_err(devbus->dev, "invalid bus width %d\n", r->bus_width);
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
|
|
&r->badr_skew);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps",
|
|
&r->turn_off);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps",
|
|
&r->acc_first);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps",
|
|
&r->acc_next);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (of_device_is_compatible(devbus->dev->of_node, "marvell,mvebu-devbus")) {
|
|
err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
|
|
&r->rd_setup);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
|
|
&r->rd_hold);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = of_property_read_u32(node, "devbus,sync-enable",
|
|
&w->sync_enable);
|
|
if (err < 0) {
|
|
dev_err(devbus->dev,
|
|
"%s has no 'devbus,sync-enable' property\n",
|
|
node->full_name);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps",
|
|
&w->ale_wr);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps",
|
|
&w->wr_low);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps",
|
|
&w->wr_high);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void devbus_orion_set_timing_params(struct devbus *devbus,
|
|
struct device_node *node,
|
|
struct devbus_read_params *r,
|
|
struct devbus_write_params *w)
|
|
{
|
|
u32 value;
|
|
|
|
/*
|
|
* The hardware designers found it would be a good idea to
|
|
* split most of the values in the register into two fields:
|
|
* one containing all the low-order bits, and another one
|
|
* containing just the high-order bit. For all of those
|
|
* fields, we have to split the value into these two parts.
|
|
*/
|
|
value = (r->turn_off & ORION_TURN_OFF_MASK) << ORION_TURN_OFF_SHIFT |
|
|
(r->acc_first & ORION_ACC_FIRST_MASK) << ORION_ACC_FIRST_SHIFT |
|
|
(r->acc_next & ORION_ACC_NEXT_MASK) << ORION_ACC_NEXT_SHIFT |
|
|
(w->ale_wr & ORION_ALE_WR_MASK) << ORION_ALE_WR_SHIFT |
|
|
(w->wr_low & ORION_WR_LOW_MASK) << ORION_WR_LOW_SHIFT |
|
|
(w->wr_high & ORION_WR_HIGH_MASK) << ORION_WR_HIGH_SHIFT |
|
|
r->bus_width << ORION_DEV_WIDTH_SHIFT |
|
|
((r->turn_off & ORION_TURN_OFF_EXT_MASK) ? ORION_TURN_OFF_EXT_BIT : 0) |
|
|
((r->acc_first & ORION_ACC_FIRST_EXT_MASK) ? ORION_ACC_FIRST_EXT_BIT : 0) |
|
|
((r->acc_next & ORION_ACC_NEXT_EXT_MASK) ? ORION_ACC_NEXT_EXT_BIT : 0) |
|
|
((w->ale_wr & ORION_ALE_WR_EXT_MASK) ? ORION_ALE_WR_EXT_BIT : 0) |
|
|
((w->wr_low & ORION_WR_LOW_EXT_MASK) ? ORION_WR_LOW_EXT_BIT : 0) |
|
|
((w->wr_high & ORION_WR_HIGH_EXT_MASK) ? ORION_WR_HIGH_EXT_BIT : 0) |
|
|
(r->badr_skew << ORION_BADR_SKEW_SHIFT) |
|
|
ORION_RESERVED;
|
|
|
|
writel(value, devbus->base);
|
|
}
|
|
|
|
static void devbus_armada_set_timing_params(struct devbus *devbus,
|
|
struct device_node *node,
|
|
struct devbus_read_params *r,
|
|
struct devbus_write_params *w)
|
|
{
|
|
u32 value;
|
|
|
|
/* Set read timings */
|
|
value = r->bus_width << ARMADA_DEV_WIDTH_SHIFT |
|
|
r->badr_skew << ARMADA_BADR_SKEW_SHIFT |
|
|
r->rd_hold << ARMADA_RD_HOLD_SHIFT |
|
|
r->acc_next << ARMADA_ACC_NEXT_SHIFT |
|
|
r->rd_setup << ARMADA_RD_SETUP_SHIFT |
|
|
r->acc_first << ARMADA_ACC_FIRST_SHIFT |
|
|
r->turn_off;
|
|
|
|
dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
|
|
devbus->base + ARMADA_READ_PARAM_OFFSET,
|
|
value);
|
|
|
|
writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET);
|
|
|
|
/* Set write timings */
|
|
value = w->sync_enable << ARMADA_SYNC_ENABLE_SHIFT |
|
|
w->wr_low << ARMADA_WR_LOW_SHIFT |
|
|
w->wr_high << ARMADA_WR_HIGH_SHIFT |
|
|
w->ale_wr;
|
|
|
|
dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
|
|
devbus->base + ARMADA_WRITE_PARAM_OFFSET,
|
|
value);
|
|
|
|
writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET);
|
|
}
|
|
|
|
static int mvebu_devbus_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct devbus_read_params r;
|
|
struct devbus_write_params w;
|
|
struct devbus *devbus;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
unsigned long rate;
|
|
int err;
|
|
|
|
devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
|
|
if (!devbus)
|
|
return -ENOMEM;
|
|
|
|
devbus->dev = dev;
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
devbus->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(devbus->base))
|
|
return PTR_ERR(devbus->base);
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
clk_prepare_enable(clk);
|
|
|
|
/*
|
|
* Obtain clock period in picoseconds,
|
|
* we need this in order to convert timing
|
|
* parameters from cycles to picoseconds.
|
|
*/
|
|
rate = clk_get_rate(clk) / 1000;
|
|
devbus->tick_ps = 1000000000 / rate;
|
|
|
|
dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
|
|
devbus->tick_ps);
|
|
|
|
if (!of_property_read_bool(node, "devbus,keep-config")) {
|
|
/* Read the Device Tree node */
|
|
err = devbus_get_timing_params(devbus, node, &r, &w);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Set the new timing parameters */
|
|
if (of_device_is_compatible(node, "marvell,orion-devbus"))
|
|
devbus_orion_set_timing_params(devbus, node, &r, &w);
|
|
else
|
|
devbus_armada_set_timing_params(devbus, node, &r, &w);
|
|
}
|
|
|
|
/*
|
|
* We need to create a child device explicitly from here to
|
|
* guarantee that the child will be probed after the timing
|
|
* parameters for the bus are written.
|
|
*/
|
|
err = of_platform_populate(node, NULL, NULL, dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mvebu_devbus_of_match[] = {
|
|
{ .compatible = "marvell,mvebu-devbus" },
|
|
{ .compatible = "marvell,orion-devbus" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match);
|
|
|
|
static struct platform_driver mvebu_devbus_driver = {
|
|
.probe = mvebu_devbus_probe,
|
|
.driver = {
|
|
.name = "mvebu-devbus",
|
|
.of_match_table = mvebu_devbus_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init mvebu_devbus_init(void)
|
|
{
|
|
return platform_driver_register(&mvebu_devbus_driver);
|
|
}
|
|
module_init(mvebu_devbus_init);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Marvell EBU SoC Device Bus controller");
|