linux/arch/loongarch/Kconfig

# SPDX-License-Identifier: GPL-2.0
config LOONGARCH
	bool
	default y
	select ACPI
	select ACPI_GENERIC_GSI if ACPI
	select ACPI_MCFG if ACPI
	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
	select ARCH_BINFMT_ELF_STATE
	select ARCH_ENABLE_MEMORY_HOTPLUG
	select ARCH_ENABLE_MEMORY_HOTREMOVE
	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
	select ARCH_HAS_PTE_SPECIAL
	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
	select ARCH_INLINE_READ_LOCK if !PREEMPTION
	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION
	select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION
	select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
	select ARCH_KEEP_MEMBLOCK
	select ARCH_MIGHT_HAVE_PC_PARPORT
	select ARCH_MIGHT_HAVE_PC_SERIO
	select ARCH_SPARSEMEM_ENABLE
	select ARCH_STACKWALK
	select ARCH_SUPPORTS_ACPI
	select ARCH_SUPPORTS_ATOMIC_RMW
	select ARCH_SUPPORTS_HUGETLBFS
	select ARCH_SUPPORTS_NUMA_BALANCING
	select ARCH_USE_BUILTIN_BSWAP
	select ARCH_USE_CMPXCHG_LOCKREF
	select ARCH_USE_QUEUED_RWLOCKS
	select ARCH_USE_QUEUED_SPINLOCKS
	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
	select ARCH_WANT_LD_ORPHAN_WARN
	select ARCH_WANTS_NO_INSTR
	select BUILDTIME_TABLE_SORT
	select COMMON_CLK
	select CPU_PM
	select EFI
	select GENERIC_CLOCKEVENTS
	select GENERIC_CMOS_UPDATE
	select GENERIC_CPU_AUTOPROBE
	select GENERIC_ENTRY
	select GENERIC_GETTIMEOFDAY
	select GENERIC_IOREMAP if !ARCH_IOREMAP
	select GENERIC_IRQ_MULTI_HANDLER
	select GENERIC_IRQ_PROBE
	select GENERIC_IRQ_SHOW
	select GENERIC_LIB_ASHLDI3
	select GENERIC_LIB_ASHRDI3
	select GENERIC_LIB_CMPDI2
	select GENERIC_LIB_LSHRDI3
	select GENERIC_LIB_UCMPDI2
	select GENERIC_LIB_DEVMEM_IS_ALLOWED
	select GENERIC_PCI_IOMAP
	select GENERIC_SCHED_CLOCK
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_TIME_VSYSCALL
	select GPIOLIB
	select HAVE_ARCH_AUDITSYSCALL
	select HAVE_ARCH_MMAP_RND_BITS if MMU
	select HAVE_ARCH_SECCOMP_FILTER
	select HAVE_ARCH_TRACEHOOK
	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
	select HAVE_ASM_MODVERSIONS
	select HAVE_CONTEXT_TRACKING_USER
	select HAVE_C_RECORDMCOUNT
	select HAVE_DEBUG_STACKOVERFLOW
	select HAVE_DMA_CONTIGUOUS
	select HAVE_DYNAMIC_FTRACE
	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
	select HAVE_DYNAMIC_FTRACE_WITH_REGS
	select HAVE_EBPF_JIT
	select HAVE_EXIT_THREAD
	select HAVE_FAST_GUP
	select HAVE_FTRACE_MCOUNT_RECORD
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_FUNCTION_TRACER
	select HAVE_GENERIC_VDSO
	select HAVE_IOREMAP_PROT
	select HAVE_IRQ_EXIT_ON_IRQ_STACK
	select HAVE_IRQ_TIME_ACCOUNTING
	select HAVE_MOD_ARCH_SPECIFIC
	select HAVE_NMI
	select HAVE_PCI
	select HAVE_PERF_EVENTS
	select HAVE_PERF_REGS
	select HAVE_PERF_USER_STACK_DUMP
	select HAVE_REGS_AND_STACK_ACCESS_API
	select HAVE_RSEQ
	select HAVE_SETUP_PER_CPU_AREA if NUMA
	select HAVE_STACKPROTECTOR
	select HAVE_SYSCALL_TRACEPOINTS
	select HAVE_TIF_NOHZ
	select HAVE_VIRT_CPU_ACCOUNTING_GEN if !SMP
	select IRQ_FORCED_THREADING
	select IRQ_LOONGARCH_CPU
	select MMU_GATHER_MERGE_VMAS if MMU
	select MODULES_USE_ELF_RELA if MODULES
	select NEED_PER_CPU_EMBED_FIRST_CHUNK
	select NEED_PER_CPU_PAGE_FIRST_CHUNK
	select OF
	select OF_EARLY_FLATTREE
	select PCI
	select PCI_DOMAINS_GENERIC
	select PCI_ECAM if ACPI
	select PCI_LOONGSON
	select PCI_MSI_ARCH_FALLBACKS
	select PCI_QUIRKS
	select PERF_USE_VMALLOC
	select RTC_LIB
	select SMP
	select SPARSE_IRQ
	select SYSCTL_ARCH_UNALIGN_ALLOW
	select SYSCTL_ARCH_UNALIGN_NO_WARN
	select SYSCTL_EXCEPTION_TRACE
	select SWIOTLB
	select TRACE_IRQFLAGS_SUPPORT
	select USE_PERCPU_NUMA_NODE_ID
	select USER_STACKTRACE_SUPPORT
	select ZONE_DMA32

config 32BIT
	bool

config 64BIT
	def_bool y

config CPU_HAS_FPU
	bool
	default y

config CPU_HAS_PREFETCH
	bool
	default y

config GENERIC_BUG
	def_bool y
	depends on BUG

config GENERIC_BUG_RELATIVE_POINTERS
	def_bool y
	depends on GENERIC_BUG

config GENERIC_CALIBRATE_DELAY
	def_bool y

config GENERIC_CSUM
	def_bool y

config GENERIC_HWEIGHT
	def_bool y

config L1_CACHE_SHIFT
	int
	default "6"

config LOCKDEP_SUPPORT
	bool
	default y

config STACKTRACE_SUPPORT
	bool
	default y

# MACH_LOONGSON32 and MACH_LOONGSON64 are deliberately carried over from the
# MIPS Loongson code, to preserve Loongson-specific code paths in drivers that
# are shared between architectures, and specifically expecting the symbols.
config MACH_LOONGSON32
	def_bool 32BIT

config MACH_LOONGSON64
	def_bool 64BIT

config FIX_EARLYCON_MEM
	def_bool y

config PAGE_SIZE_4KB
	bool

config PAGE_SIZE_16KB
	bool

config PAGE_SIZE_64KB
	bool

config PGTABLE_2LEVEL
	bool

config PGTABLE_3LEVEL
	bool

config PGTABLE_4LEVEL
	bool

config PGTABLE_LEVELS
	int
	default 2 if PGTABLE_2LEVEL
	default 3 if PGTABLE_3LEVEL
	default 4 if PGTABLE_4LEVEL

config SCHED_OMIT_FRAME_POINTER
	bool
	default y

config AS_HAS_EXPLICIT_RELOCS
	def_bool $(as-instr,x:pcalau12i \$t0$(comma)%pc_hi20(x))

menu "Kernel type and options"

source "kernel/Kconfig.hz"

choice
	prompt "Page Table Layout"
	default 16KB_2LEVEL if 32BIT
	default 16KB_3LEVEL if 64BIT
	help
	  Allows choosing the page table layout, which is a combination
	  of page size and page table levels. The size of virtual memory
	  address space are determined by the page table layout.

config 4KB_3LEVEL
	bool "4KB with 3 levels"
	select PAGE_SIZE_4KB
	select PGTABLE_3LEVEL
	help
	  This option selects 4KB page size with 3 level page tables, which
	  support a maximum of 39 bits of application virtual memory.

config 4KB_4LEVEL
	bool "4KB with 4 levels"
	select PAGE_SIZE_4KB
	select PGTABLE_4LEVEL
	help
	  This option selects 4KB page size with 4 level page tables, which
	  support a maximum of 48 bits of application virtual memory.

config 16KB_2LEVEL
	bool "16KB with 2 levels"
	select PAGE_SIZE_16KB
	select PGTABLE_2LEVEL
	help
	  This option selects 16KB page size with 2 level page tables, which
	  support a maximum of 36 bits of application virtual memory.

config 16KB_3LEVEL
	bool "16KB with 3 levels"
	select PAGE_SIZE_16KB
	select PGTABLE_3LEVEL
	help
	  This option selects 16KB page size with 3 level page tables, which
	  support a maximum of 47 bits of application virtual memory.

config 64KB_2LEVEL
	bool "64KB with 2 levels"
	select PAGE_SIZE_64KB
	select PGTABLE_2LEVEL
	help
	  This option selects 64KB page size with 2 level page tables, which
	  support a maximum of 42 bits of application virtual memory.

config 64KB_3LEVEL
	bool "64KB with 3 levels"
	select PAGE_SIZE_64KB
	select PGTABLE_3LEVEL
	help
	  This option selects 64KB page size with 3 level page tables, which
	  support a maximum of 55 bits of application virtual memory.

endchoice

config CMDLINE
	string "Built-in kernel command line"
	help
	  For most platforms, the arguments for the kernel's command line
	  are provided at run-time, during boot. However, there are cases
	  where either no arguments are being provided or the provided
	  arguments are insufficient or even invalid.

	  When that occurs, it is possible to define a built-in command
	  line here and choose how the kernel should use it later on.

choice
	prompt "Kernel command line type"
	default CMDLINE_BOOTLOADER
	help
	  Choose how the kernel will handle the provided built-in command
	  line.

config CMDLINE_BOOTLOADER
	bool "Use bootloader kernel arguments if available"
	help
	  Prefer the command-line passed by the boot loader if available.
	  Use the built-in command line as fallback in case we get nothing
	  during boot. This is the default behaviour.

config CMDLINE_EXTEND
	bool "Use built-in to extend bootloader kernel arguments"
	help
	  The command-line arguments provided during boot will be
	  appended to the built-in command line. This is useful in
	  cases where the provided arguments are insufficient and
	  you don't want to or cannot modify them.

config CMDLINE_FORCE
	bool "Always use the built-in kernel command string"
	help
	  Always use the built-in command line, even if we get one during
	  boot. This is useful in case you need to override the provided
	  command line on systems where you don't have or want control
	  over it.

endchoice

config DMI
	bool "Enable DMI scanning"
	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
	default y
	help
	  This enables SMBIOS/DMI feature for systems, and scanning of
	  DMI to identify machine quirks.

config EFI
	bool "EFI runtime service support"
	select UCS2_STRING
	select EFI_RUNTIME_WRAPPERS
	help
	  This enables the kernel to use EFI runtime services that are
	  available (such as the EFI variable services).

config EFI_STUB
	bool "EFI boot stub support"
	default y
	depends on EFI
	select EFI_GENERIC_STUB
	help
	  This kernel feature allows the kernel to be loaded directly by
	  EFI firmware without the use of a bootloader.

config SMP
	bool "Multi-Processing support"
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, say N. If you have a system with more
	  than one CPU, say Y.

	  If you say N here, the kernel will run on uni- and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
	  uniprocessor machines. On a uniprocessor machine, the kernel
	  will run faster if you say N here.

	  See also the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs"
	depends on SMP
	select GENERIC_IRQ_MIGRATION
	help
	  Say Y here to allow turning CPUs off and on. CPUs can be
	  controlled through /sys/devices/system/cpu.
	  (Note: power management support will enable this option
	    automatically on SMP systems. )
	  Say N if you want to disable CPU hotplug.

config NR_CPUS
	int "Maximum number of CPUs (2-256)"
	range 2 256
	depends on SMP
	default "64"
	help
	  This allows you to specify the maximum number of CPUs which this
	  kernel will support.

config NUMA
	bool "NUMA Support"
	select SMP
	select ACPI_NUMA if ACPI
	help
	  Say Y to compile the kernel with NUMA (Non-Uniform Memory Access)
	  support.  This option improves performance on systems with more
	  than one NUMA node; on single node systems it is generally better
	  to leave it disabled.

config NODES_SHIFT
	int
	default "6"
	depends on NUMA

config ARCH_FORCE_MAX_ORDER
	int "Maximum zone order"
	range 14 64 if PAGE_SIZE_64KB
	default "14" if PAGE_SIZE_64KB
	range 12 64 if PAGE_SIZE_16KB
	default "12" if PAGE_SIZE_16KB
	range 11 64
	default "11"
	help
	  The kernel memory allocator divides physically contiguous memory
	  blocks into "zones", where each zone is a power of two number of
	  pages.  This option selects the largest power of two that the kernel
	  keeps in the memory allocator.  If you need to allocate very large
	  blocks of physically contiguous memory, then you may need to
	  increase this value.

	  This config option is actually maximum order plus one. For example,
	  a value of 11 means that the largest free memory block is 2^10 pages.

	  The page size is not necessarily 4KB.  Keep this in mind
	  when choosing a value for this option.

config ARCH_IOREMAP
	bool "Enable LoongArch DMW-based ioremap()"
	help
	  We use generic TLB-based ioremap() by default since it has page
	  protection support. However, you can enable LoongArch DMW-based
	  ioremap() for better performance.

config KEXEC
	bool "Kexec system call"
	select KEXEC_CORE
	help
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
	  but it is independent of the system firmware.   And like a reboot
	  you can start any kernel with it, not just Linux.

	  The name comes from the similarity to the exec system call.

config CRASH_DUMP
	bool "Build kdump crash kernel"
	help
	  Generate crash dump after being started by kexec. This should
	  be normally only set in special crash dump kernels which are
	  loaded in the main kernel with kexec-tools into a specially
	  reserved region and then later executed after a crash by
	  kdump/kexec.

	  For more details see Documentation/admin-guide/kdump/kdump.rst

config PHYSICAL_START
	hex "Physical address where the kernel is loaded"
	default "0x90000000a0000000"
	depends on CRASH_DUMP
	help
	  This gives the XKPRANGE address where the kernel is loaded.
	  If you plan to use kernel for capturing the crash dump change
	  this value to start of the reserved region (the "X" value as
	  specified in the "crashkernel=YM@XM" command line boot parameter
	  passed to the panic-ed kernel).

config SECCOMP
	bool "Enable seccomp to safely compute untrusted bytecode"
	depends on PROC_FS
	default y
	help
	  This kernel feature is useful for number crunching applications
	  that may need to compute untrusted bytecode during their
	  execution. By using pipes or other transports made available to
	  the process as file descriptors supporting the read/write
	  syscalls, it's possible to isolate those applications in
	  their own address space using seccomp. Once seccomp is
	  enabled via /proc/<pid>/seccomp, it cannot be disabled
	  and the task is only allowed to execute a few safe syscalls
	  defined by each seccomp mode.

	  If unsure, say Y. Only embedded should say N here.

endmenu

config ARCH_SELECT_MEMORY_MODEL
	def_bool y

config ARCH_FLATMEM_ENABLE
	def_bool y
	depends on !NUMA

config ARCH_SPARSEMEM_ENABLE
	def_bool y
	select SPARSEMEM_VMEMMAP_ENABLE
	help
	  Say Y to support efficient handling of sparse physical memory,
	  for architectures which are either NUMA (Non-Uniform Memory Access)
	  or have huge holes in the physical address space for other reasons.
	  See <file:Documentation/mm/numa.rst> for more.

config ARCH_ENABLE_THP_MIGRATION
	def_bool y
	depends on TRANSPARENT_HUGEPAGE

config ARCH_MEMORY_PROBE
	def_bool y
	depends on MEMORY_HOTPLUG

config MMU
	bool
	default y

config ARCH_MMAP_RND_BITS_MIN
	default 12

config ARCH_MMAP_RND_BITS_MAX
	default 18

menu "Power management options"

config ARCH_SUSPEND_POSSIBLE
	def_bool y

config ARCH_HIBERNATION_POSSIBLE
	def_bool y

source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"

endmenu

source "drivers/firmware/Kconfig"