mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 06:55:13 +08:00
b64333ce76
This adds the initial support of the Broadcom Cygnus GPIO/PINCONF driver that supports all 3 GPIO controllers on Cygnus including the ASIU GPIO controller, the chipCommonG GPIO controller, and the always-on GPIO controller. Basic PINCONF configurations such as bias pull up/down, and drive strength are also supported in this driver. Pins from the ASIU GPIO controller can be individually muxed to GPIO function, through interaction with the Cygnus IOMUX controller Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
908 lines
23 KiB
C
908 lines
23 KiB
C
/*
|
|
* Copyright (C) 2014-2015 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* This file contains the Broadcom Cygnus GPIO driver that supports 3
|
|
* GPIO controllers on Cygnus including the ASIU GPIO controller, the
|
|
* chipCommonG GPIO controller, and the always-on GPIO controller. Basic
|
|
* PINCONF such as bias pull up/down, and drive strength are also supported
|
|
* in this driver.
|
|
*
|
|
* Pins from the ASIU GPIO can be individually muxed to GPIO function,
|
|
* through the interaction with the Cygnus IOMUX controller
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include "../pinctrl-utils.h"
|
|
|
|
#define CYGNUS_GPIO_DATA_IN_OFFSET 0x00
|
|
#define CYGNUS_GPIO_DATA_OUT_OFFSET 0x04
|
|
#define CYGNUS_GPIO_OUT_EN_OFFSET 0x08
|
|
#define CYGNUS_GPIO_IN_TYPE_OFFSET 0x0c
|
|
#define CYGNUS_GPIO_INT_DE_OFFSET 0x10
|
|
#define CYGNUS_GPIO_INT_EDGE_OFFSET 0x14
|
|
#define CYGNUS_GPIO_INT_MSK_OFFSET 0x18
|
|
#define CYGNUS_GPIO_INT_STAT_OFFSET 0x1c
|
|
#define CYGNUS_GPIO_INT_MSTAT_OFFSET 0x20
|
|
#define CYGNUS_GPIO_INT_CLR_OFFSET 0x24
|
|
#define CYGNUS_GPIO_PAD_RES_OFFSET 0x34
|
|
#define CYGNUS_GPIO_RES_EN_OFFSET 0x38
|
|
|
|
/* drive strength control for ASIU GPIO */
|
|
#define CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
|
|
|
|
/* drive strength control for CCM/CRMU (AON) GPIO */
|
|
#define CYGNUS_GPIO_DRV0_CTRL_OFFSET 0x00
|
|
|
|
#define GPIO_BANK_SIZE 0x200
|
|
#define NGPIOS_PER_BANK 32
|
|
#define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK)
|
|
|
|
#define CYGNUS_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
|
|
#define CYGNUS_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
|
|
|
|
#define GPIO_DRV_STRENGTH_BIT_SHIFT 20
|
|
#define GPIO_DRV_STRENGTH_BITS 3
|
|
#define GPIO_DRV_STRENGTH_BIT_MASK ((1 << GPIO_DRV_STRENGTH_BITS) - 1)
|
|
|
|
/*
|
|
* Cygnus GPIO core
|
|
*
|
|
* @dev: pointer to device
|
|
* @base: I/O register base for Cygnus GPIO controller
|
|
* @io_ctrl: I/O register base for certain type of Cygnus GPIO controller that
|
|
* has the PINCONF support implemented outside of the GPIO block
|
|
* @lock: lock to protect access to I/O registers
|
|
* @gc: GPIO chip
|
|
* @num_banks: number of GPIO banks, each bank supports up to 32 GPIOs
|
|
* @pinmux_is_supported: flag to indicate this GPIO controller contains pins
|
|
* that can be individually muxed to GPIO
|
|
* @pctl: pointer to pinctrl_dev
|
|
* @pctldesc: pinctrl descriptor
|
|
*/
|
|
struct cygnus_gpio {
|
|
struct device *dev;
|
|
|
|
void __iomem *base;
|
|
void __iomem *io_ctrl;
|
|
|
|
spinlock_t lock;
|
|
|
|
struct gpio_chip gc;
|
|
unsigned num_banks;
|
|
|
|
bool pinmux_is_supported;
|
|
|
|
struct pinctrl_dev *pctl;
|
|
struct pinctrl_desc pctldesc;
|
|
};
|
|
|
|
static inline struct cygnus_gpio *to_cygnus_gpio(struct gpio_chip *gc)
|
|
{
|
|
return container_of(gc, struct cygnus_gpio, gc);
|
|
}
|
|
|
|
/*
|
|
* Mapping from PINCONF pins to GPIO pins is 1-to-1
|
|
*/
|
|
static inline unsigned cygnus_pin_to_gpio(unsigned pin)
|
|
{
|
|
return pin;
|
|
}
|
|
|
|
/**
|
|
* cygnus_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
|
|
* Cygnus GPIO register
|
|
*
|
|
* @cygnus_gpio: Cygnus GPIO device
|
|
* @reg: register offset
|
|
* @gpio: GPIO pin
|
|
* @set: set or clear
|
|
*/
|
|
static inline void cygnus_set_bit(struct cygnus_gpio *chip, unsigned int reg,
|
|
unsigned gpio, bool set)
|
|
{
|
|
unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
|
|
unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
|
|
u32 val;
|
|
|
|
val = readl(chip->base + offset);
|
|
if (set)
|
|
val |= BIT(shift);
|
|
else
|
|
val &= ~BIT(shift);
|
|
writel(val, chip->base + offset);
|
|
}
|
|
|
|
static inline bool cygnus_get_bit(struct cygnus_gpio *chip, unsigned int reg,
|
|
unsigned gpio)
|
|
{
|
|
unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
|
|
unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
|
|
|
|
return !!(readl(chip->base + offset) & BIT(shift));
|
|
}
|
|
|
|
static void cygnus_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
|
|
int i, bit;
|
|
|
|
chained_irq_enter(irq_chip, desc);
|
|
|
|
/* go through the entire GPIO banks and handle all interrupts */
|
|
for (i = 0; i < chip->num_banks; i++) {
|
|
unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) +
|
|
CYGNUS_GPIO_INT_MSTAT_OFFSET);
|
|
|
|
for_each_set_bit(bit, &val, NGPIOS_PER_BANK) {
|
|
unsigned pin = NGPIOS_PER_BANK * i + bit;
|
|
int child_irq = irq_find_mapping(gc->irqdomain, pin);
|
|
|
|
/*
|
|
* Clear the interrupt before invoking the
|
|
* handler, so we do not leave any window
|
|
*/
|
|
writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) +
|
|
CYGNUS_GPIO_INT_CLR_OFFSET);
|
|
|
|
generic_handle_irq(child_irq);
|
|
}
|
|
}
|
|
|
|
chained_irq_exit(irq_chip, desc);
|
|
}
|
|
|
|
|
|
static void cygnus_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned gpio = d->hwirq;
|
|
unsigned int offset = CYGNUS_GPIO_REG(gpio,
|
|
CYGNUS_GPIO_INT_CLR_OFFSET);
|
|
unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
|
|
u32 val = BIT(shift);
|
|
|
|
writel(val, chip->base + offset);
|
|
}
|
|
|
|
/**
|
|
* cygnus_gpio_irq_set_mask - mask/unmask a GPIO interrupt
|
|
*
|
|
* @d: IRQ chip data
|
|
* @unmask: mask/unmask GPIO interrupt
|
|
*/
|
|
static void cygnus_gpio_irq_set_mask(struct irq_data *d, bool unmask)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned gpio = d->hwirq;
|
|
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_INT_MSK_OFFSET, gpio, unmask);
|
|
}
|
|
|
|
static void cygnus_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
cygnus_gpio_irq_set_mask(d, false);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static void cygnus_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
cygnus_gpio_irq_set_mask(d, true);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned gpio = d->hwirq;
|
|
bool level_triggered = false;
|
|
bool dual_edge = false;
|
|
bool rising_or_high = false;
|
|
unsigned long flags;
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
rising_or_high = true;
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
dual_edge = true;
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
level_triggered = true;
|
|
rising_or_high = true;
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
level_triggered = true;
|
|
break;
|
|
|
|
default:
|
|
dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
|
|
type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_IN_TYPE_OFFSET, gpio,
|
|
level_triggered);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_INT_DE_OFFSET, gpio, dual_edge);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_INT_EDGE_OFFSET, gpio,
|
|
rising_or_high);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev,
|
|
"gpio:%u level_triggered:%d dual_edge:%d rising_or_high:%d\n",
|
|
gpio, level_triggered, dual_edge, rising_or_high);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip cygnus_gpio_irq_chip = {
|
|
.name = "bcm-cygnus-gpio",
|
|
.irq_ack = cygnus_gpio_irq_ack,
|
|
.irq_mask = cygnus_gpio_irq_mask,
|
|
.irq_unmask = cygnus_gpio_irq_unmask,
|
|
.irq_set_type = cygnus_gpio_irq_set_type,
|
|
};
|
|
|
|
/*
|
|
* Request the Cygnus IOMUX pinmux controller to mux individual pins to GPIO
|
|
*/
|
|
static int cygnus_gpio_request(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned gpio = gc->base + offset;
|
|
|
|
/* not all Cygnus GPIO pins can be muxed individually */
|
|
if (!chip->pinmux_is_supported)
|
|
return 0;
|
|
|
|
return pinctrl_request_gpio(gpio);
|
|
}
|
|
|
|
static void cygnus_gpio_free(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned gpio = gc->base + offset;
|
|
|
|
if (!chip->pinmux_is_supported)
|
|
return;
|
|
|
|
pinctrl_free_gpio(gpio);
|
|
}
|
|
|
|
static int cygnus_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
|
|
{
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, false);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cygnus_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
|
|
int val)
|
|
{
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, true);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cygnus_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
|
|
{
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
|
|
}
|
|
|
|
static int cygnus_gpio_get(struct gpio_chip *gc, unsigned gpio)
|
|
{
|
|
struct cygnus_gpio *chip = to_cygnus_gpio(gc);
|
|
unsigned int offset = CYGNUS_GPIO_REG(gpio,
|
|
CYGNUS_GPIO_DATA_IN_OFFSET);
|
|
unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
|
|
|
|
return !!(readl(chip->base + offset) & BIT(shift));
|
|
}
|
|
|
|
static int cygnus_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Only one group: "gpio_grp", since this local pinctrl device only performs
|
|
* GPIO specific PINCONF configurations
|
|
*/
|
|
static const char *cygnus_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
return "gpio_grp";
|
|
}
|
|
|
|
static const struct pinctrl_ops cygnus_pctrl_ops = {
|
|
.get_groups_count = cygnus_get_groups_count,
|
|
.get_group_name = cygnus_get_group_name,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
|
.dt_free_map = pinctrl_utils_dt_free_map,
|
|
};
|
|
|
|
static int cygnus_gpio_set_pull(struct cygnus_gpio *chip, unsigned gpio,
|
|
bool disable, bool pull_up)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
|
|
if (disable) {
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio, false);
|
|
} else {
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_PAD_RES_OFFSET, gpio,
|
|
pull_up);
|
|
cygnus_set_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio, true);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cygnus_gpio_get_pull(struct cygnus_gpio *chip, unsigned gpio,
|
|
bool *disable, bool *pull_up)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
*disable = !cygnus_get_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio);
|
|
*pull_up = cygnus_get_bit(chip, CYGNUS_GPIO_PAD_RES_OFFSET, gpio);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static int cygnus_gpio_set_strength(struct cygnus_gpio *chip, unsigned gpio,
|
|
unsigned strength)
|
|
{
|
|
void __iomem *base;
|
|
unsigned int i, offset, shift;
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
/* make sure drive strength is supported */
|
|
if (strength < 2 || strength > 16 || (strength % 2))
|
|
return -ENOTSUPP;
|
|
|
|
if (chip->io_ctrl) {
|
|
base = chip->io_ctrl;
|
|
offset = CYGNUS_GPIO_DRV0_CTRL_OFFSET;
|
|
} else {
|
|
base = chip->base;
|
|
offset = CYGNUS_GPIO_REG(gpio,
|
|
CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET);
|
|
}
|
|
|
|
shift = CYGNUS_GPIO_SHIFT(gpio);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
|
|
strength);
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
strength = (strength / 2) - 1;
|
|
for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
|
|
val = readl(base + offset);
|
|
val &= ~BIT(shift);
|
|
val |= ((strength >> i) & 0x1) << shift;
|
|
writel(val, base + offset);
|
|
offset += 4;
|
|
}
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cygnus_gpio_get_strength(struct cygnus_gpio *chip, unsigned gpio,
|
|
u16 *strength)
|
|
{
|
|
void __iomem *base;
|
|
unsigned int i, offset, shift;
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
if (chip->io_ctrl) {
|
|
base = chip->io_ctrl;
|
|
offset = CYGNUS_GPIO_DRV0_CTRL_OFFSET;
|
|
} else {
|
|
base = chip->base;
|
|
offset = CYGNUS_GPIO_REG(gpio,
|
|
CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET);
|
|
}
|
|
|
|
shift = CYGNUS_GPIO_SHIFT(gpio);
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
*strength = 0;
|
|
for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
|
|
val = readl(base + offset) & BIT(shift);
|
|
val >>= shift;
|
|
*strength += (val << i);
|
|
offset += 4;
|
|
}
|
|
|
|
/* convert to mA */
|
|
*strength = (*strength + 1) * 2;
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cygnus_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
|
|
unsigned long *config)
|
|
{
|
|
struct cygnus_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
unsigned gpio = cygnus_pin_to_gpio(pin);
|
|
u16 arg;
|
|
bool disable, pull_up;
|
|
int ret;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
|
|
if (disable)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
|
|
if (!disable && pull_up)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
|
|
if (!disable && !pull_up)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
ret = cygnus_gpio_get_strength(chip, gpio, &arg);
|
|
if (ret)
|
|
return ret;
|
|
else
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static int cygnus_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
struct cygnus_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param;
|
|
u16 arg;
|
|
unsigned i, gpio = cygnus_pin_to_gpio(pin);
|
|
int ret = -ENOTSUPP;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
ret = cygnus_gpio_set_pull(chip, gpio, true, false);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
ret = cygnus_gpio_set_pull(chip, gpio, false, true);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
ret = cygnus_gpio_set_pull(chip, gpio, false, false);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
ret = cygnus_gpio_set_strength(chip, gpio, arg);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
default:
|
|
dev_err(chip->dev, "invalid configuration\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
} /* for each config */
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static const struct pinconf_ops cygnus_pconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_get = cygnus_pin_config_get,
|
|
.pin_config_set = cygnus_pin_config_set,
|
|
};
|
|
|
|
/*
|
|
* Map a GPIO in the local gpio_chip pin space to a pin in the Cygnus IOMUX
|
|
* pinctrl pin space
|
|
*/
|
|
struct cygnus_gpio_pin_range {
|
|
unsigned offset;
|
|
unsigned pin_base;
|
|
unsigned num_pins;
|
|
};
|
|
|
|
#define CYGNUS_PINRANGE(o, p, n) { .offset = o, .pin_base = p, .num_pins = n }
|
|
|
|
/*
|
|
* Pin mapping table for mapping local GPIO pins to Cygnus IOMUX pinctrl pins
|
|
*/
|
|
static const struct cygnus_gpio_pin_range cygnus_gpio_pintable[] = {
|
|
CYGNUS_PINRANGE(0, 42, 1),
|
|
CYGNUS_PINRANGE(1, 44, 3),
|
|
CYGNUS_PINRANGE(4, 48, 1),
|
|
CYGNUS_PINRANGE(5, 50, 3),
|
|
CYGNUS_PINRANGE(8, 126, 1),
|
|
CYGNUS_PINRANGE(9, 155, 1),
|
|
CYGNUS_PINRANGE(10, 152, 1),
|
|
CYGNUS_PINRANGE(11, 154, 1),
|
|
CYGNUS_PINRANGE(12, 153, 1),
|
|
CYGNUS_PINRANGE(13, 127, 3),
|
|
CYGNUS_PINRANGE(16, 140, 1),
|
|
CYGNUS_PINRANGE(17, 145, 7),
|
|
CYGNUS_PINRANGE(24, 130, 10),
|
|
CYGNUS_PINRANGE(34, 141, 4),
|
|
CYGNUS_PINRANGE(38, 54, 1),
|
|
CYGNUS_PINRANGE(39, 56, 3),
|
|
CYGNUS_PINRANGE(42, 60, 3),
|
|
CYGNUS_PINRANGE(45, 64, 3),
|
|
CYGNUS_PINRANGE(48, 68, 2),
|
|
CYGNUS_PINRANGE(50, 84, 6),
|
|
CYGNUS_PINRANGE(56, 94, 6),
|
|
CYGNUS_PINRANGE(62, 72, 1),
|
|
CYGNUS_PINRANGE(63, 70, 1),
|
|
CYGNUS_PINRANGE(64, 80, 1),
|
|
CYGNUS_PINRANGE(65, 74, 3),
|
|
CYGNUS_PINRANGE(68, 78, 1),
|
|
CYGNUS_PINRANGE(69, 82, 1),
|
|
CYGNUS_PINRANGE(70, 156, 17),
|
|
CYGNUS_PINRANGE(87, 104, 12),
|
|
CYGNUS_PINRANGE(99, 102, 2),
|
|
CYGNUS_PINRANGE(101, 90, 4),
|
|
CYGNUS_PINRANGE(105, 116, 10),
|
|
CYGNUS_PINRANGE(123, 11, 1),
|
|
CYGNUS_PINRANGE(124, 38, 4),
|
|
CYGNUS_PINRANGE(128, 43, 1),
|
|
CYGNUS_PINRANGE(129, 47, 1),
|
|
CYGNUS_PINRANGE(130, 49, 1),
|
|
CYGNUS_PINRANGE(131, 53, 1),
|
|
CYGNUS_PINRANGE(132, 55, 1),
|
|
CYGNUS_PINRANGE(133, 59, 1),
|
|
CYGNUS_PINRANGE(134, 63, 1),
|
|
CYGNUS_PINRANGE(135, 67, 1),
|
|
CYGNUS_PINRANGE(136, 71, 1),
|
|
CYGNUS_PINRANGE(137, 73, 1),
|
|
CYGNUS_PINRANGE(138, 77, 1),
|
|
CYGNUS_PINRANGE(139, 79, 1),
|
|
CYGNUS_PINRANGE(140, 81, 1),
|
|
CYGNUS_PINRANGE(141, 83, 1),
|
|
CYGNUS_PINRANGE(142, 10, 1)
|
|
};
|
|
|
|
/*
|
|
* The Cygnus IOMUX controller mainly supports group based mux configuration,
|
|
* but certain pins can be muxed to GPIO individually. Only the ASIU GPIO
|
|
* controller can support this, so it's an optional configuration
|
|
*
|
|
* Return -ENODEV means no support and that's fine
|
|
*/
|
|
static int cygnus_gpio_pinmux_add_range(struct cygnus_gpio *chip)
|
|
{
|
|
struct device_node *node = chip->dev->of_node;
|
|
struct device_node *pinmux_node;
|
|
struct platform_device *pinmux_pdev;
|
|
struct gpio_chip *gc = &chip->gc;
|
|
int i, ret = 0;
|
|
|
|
/* parse DT to find the phandle to the pinmux controller */
|
|
pinmux_node = of_parse_phandle(node, "pinmux", 0);
|
|
if (!pinmux_node)
|
|
return -ENODEV;
|
|
|
|
pinmux_pdev = of_find_device_by_node(pinmux_node);
|
|
/* no longer need the pinmux node */
|
|
of_node_put(pinmux_node);
|
|
if (!pinmux_pdev) {
|
|
dev_err(chip->dev, "failed to get pinmux device\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* now need to create the mapping between local GPIO and PINMUX pins */
|
|
for (i = 0; i < ARRAY_SIZE(cygnus_gpio_pintable); i++) {
|
|
ret = gpiochip_add_pin_range(gc, dev_name(&pinmux_pdev->dev),
|
|
cygnus_gpio_pintable[i].offset,
|
|
cygnus_gpio_pintable[i].pin_base,
|
|
cygnus_gpio_pintable[i].num_pins);
|
|
if (ret) {
|
|
dev_err(chip->dev, "unable to add GPIO pin range\n");
|
|
goto err_put_device;
|
|
}
|
|
}
|
|
|
|
chip->pinmux_is_supported = true;
|
|
|
|
/* no need for pinmux_pdev device reference anymore */
|
|
put_device(&pinmux_pdev->dev);
|
|
return 0;
|
|
|
|
err_put_device:
|
|
put_device(&pinmux_pdev->dev);
|
|
gpiochip_remove_pin_ranges(gc);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Cygnus GPIO controller supports some PINCONF related configurations such as
|
|
* pull up, pull down, and drive strength, when the pin is configured to GPIO
|
|
*
|
|
* Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
|
|
* local GPIO pins
|
|
*/
|
|
static int cygnus_gpio_register_pinconf(struct cygnus_gpio *chip)
|
|
{
|
|
struct pinctrl_desc *pctldesc = &chip->pctldesc;
|
|
struct pinctrl_pin_desc *pins;
|
|
struct gpio_chip *gc = &chip->gc;
|
|
int i;
|
|
|
|
pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
|
|
if (!pins)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < gc->ngpio; i++) {
|
|
pins[i].number = i;
|
|
pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
|
|
"gpio-%d", i);
|
|
if (!pins[i].name)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pctldesc->name = dev_name(chip->dev);
|
|
pctldesc->pctlops = &cygnus_pctrl_ops;
|
|
pctldesc->pins = pins;
|
|
pctldesc->npins = gc->ngpio;
|
|
pctldesc->confops = &cygnus_pconf_ops;
|
|
|
|
chip->pctl = pinctrl_register(pctldesc, chip->dev, chip);
|
|
if (!chip->pctl) {
|
|
dev_err(chip->dev, "unable to register pinctrl device\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cygnus_gpio_unregister_pinconf(struct cygnus_gpio *chip)
|
|
{
|
|
if (chip->pctl)
|
|
pinctrl_unregister(chip->pctl);
|
|
}
|
|
|
|
struct cygnus_gpio_data {
|
|
unsigned num_gpios;
|
|
};
|
|
|
|
static const struct cygnus_gpio_data cygnus_cmm_gpio_data = {
|
|
.num_gpios = 24,
|
|
};
|
|
|
|
static const struct cygnus_gpio_data cygnus_asiu_gpio_data = {
|
|
.num_gpios = 146,
|
|
};
|
|
|
|
static const struct cygnus_gpio_data cygnus_crmu_gpio_data = {
|
|
.num_gpios = 6,
|
|
};
|
|
|
|
static const struct of_device_id cygnus_gpio_of_match[] = {
|
|
{
|
|
.compatible = "brcm,cygnus-ccm-gpio",
|
|
.data = &cygnus_cmm_gpio_data,
|
|
},
|
|
{
|
|
.compatible = "brcm,cygnus-asiu-gpio",
|
|
.data = &cygnus_asiu_gpio_data,
|
|
},
|
|
{
|
|
.compatible = "brcm,cygnus-crmu-gpio",
|
|
.data = &cygnus_crmu_gpio_data,
|
|
}
|
|
};
|
|
|
|
static int cygnus_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct cygnus_gpio *chip;
|
|
struct gpio_chip *gc;
|
|
u32 ngpios;
|
|
int irq, ret;
|
|
const struct of_device_id *match;
|
|
const struct cygnus_gpio_data *gpio_data;
|
|
|
|
match = of_match_device(cygnus_gpio_of_match, dev);
|
|
if (!match)
|
|
return -ENODEV;
|
|
gpio_data = match->data;
|
|
ngpios = gpio_data->num_gpios;
|
|
|
|
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->dev = dev;
|
|
platform_set_drvdata(pdev, chip);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
chip->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(chip->base)) {
|
|
dev_err(dev, "unable to map I/O memory\n");
|
|
return PTR_ERR(chip->base);
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (res) {
|
|
chip->io_ctrl = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(chip->io_ctrl)) {
|
|
dev_err(dev, "unable to map I/O memory\n");
|
|
return PTR_ERR(chip->io_ctrl);
|
|
}
|
|
}
|
|
|
|
spin_lock_init(&chip->lock);
|
|
|
|
gc = &chip->gc;
|
|
gc->base = -1;
|
|
gc->ngpio = ngpios;
|
|
chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
|
|
gc->label = dev_name(dev);
|
|
gc->dev = dev;
|
|
gc->of_node = dev->of_node;
|
|
gc->request = cygnus_gpio_request;
|
|
gc->free = cygnus_gpio_free;
|
|
gc->direction_input = cygnus_gpio_direction_input;
|
|
gc->direction_output = cygnus_gpio_direction_output;
|
|
gc->set = cygnus_gpio_set;
|
|
gc->get = cygnus_gpio_get;
|
|
|
|
ret = gpiochip_add(gc);
|
|
if (ret < 0) {
|
|
dev_err(dev, "unable to add GPIO chip\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = cygnus_gpio_pinmux_add_range(chip);
|
|
if (ret && ret != -ENODEV) {
|
|
dev_err(dev, "unable to add GPIO pin range\n");
|
|
goto err_rm_gpiochip;
|
|
}
|
|
|
|
ret = cygnus_gpio_register_pinconf(chip);
|
|
if (ret) {
|
|
dev_err(dev, "unable to register pinconf\n");
|
|
goto err_rm_gpiochip;
|
|
}
|
|
|
|
/* optional GPIO interrupt support */
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq) {
|
|
ret = gpiochip_irqchip_add(gc, &cygnus_gpio_irq_chip, 0,
|
|
handle_simple_irq, IRQ_TYPE_NONE);
|
|
if (ret) {
|
|
dev_err(dev, "no GPIO irqchip\n");
|
|
goto err_unregister_pinconf;
|
|
}
|
|
|
|
gpiochip_set_chained_irqchip(gc, &cygnus_gpio_irq_chip, irq,
|
|
cygnus_gpio_irq_handler);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister_pinconf:
|
|
cygnus_gpio_unregister_pinconf(chip);
|
|
|
|
err_rm_gpiochip:
|
|
gpiochip_remove(gc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver cygnus_gpio_driver = {
|
|
.driver = {
|
|
.name = "cygnus-gpio",
|
|
.of_match_table = cygnus_gpio_of_match,
|
|
},
|
|
.probe = cygnus_gpio_probe,
|
|
};
|
|
|
|
static int __init cygnus_gpio_init(void)
|
|
{
|
|
return platform_driver_probe(&cygnus_gpio_driver, cygnus_gpio_probe);
|
|
}
|
|
arch_initcall_sync(cygnus_gpio_init);
|