linux/arch/mips/pci/ops-marvell.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

94 lines
2.0 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/marvell.h>
static int mv_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 * val)
{
struct mv_pci_controller *mvbc = bus->sysdata;
unsigned long address_reg, data_reg;
u32 address;
address_reg = mvbc->config_addr;
data_reg = mvbc->config_vreg;
/* Accessing device 31 crashes those Marvells. Since years.
Will they ever make sane controllers ... */
if (PCI_SLOT(devfn) == 31)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (bus->number << 16) | (devfn << 8) |
(where & 0xfc) | 0x80000000;
/* start the configuration cycle */
MV_WRITE(address_reg, address);
switch (size) {
case 1:
*val = MV_READ_8(data_reg + (where & 0x3));
break;
case 2:
*val = MV_READ_16(data_reg + (where & 0x3));
break;
case 4:
*val = MV_READ(data_reg);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int mv_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
struct mv_pci_controller *mvbc = bus->sysdata;
unsigned long address_reg, data_reg;
u32 address;
address_reg = mvbc->config_addr;
data_reg = mvbc->config_vreg;
/* Accessing device 31 crashes those Marvells. Since years.
Will they ever make sane controllers ... */
if (PCI_SLOT(devfn) == 31)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (bus->number << 16) | (devfn << 8) |
(where & 0xfc) | 0x80000000;
/* start the configuration cycle */
MV_WRITE(address_reg, address);
switch (size) {
case 1:
MV_WRITE_8(data_reg + (where & 0x3), val);
break;
case 2:
MV_WRITE_16(data_reg + (where & 0x3), val);
break;
case 4:
MV_WRITE(data_reg, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops mv_pci_ops = {
.read = mv_read_config,
.write = mv_write_config
};