mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
f41aaca593
msmgpio irqchip was not using return value of irq_set_irq_wake() callback since previously GIC-v3 irqchip neither had IRQCHIP_SKIP_SET_WAKE flag nor it implemented .irq_set_wake callback. This lead to irq_set_irq_wake() return error -ENXIO. However from 'commit4110b5cbb0
("irqchip/gic-v3: Allow interrupt to be configured as wake-up sources")' GIC irqchip has IRQCHIP_SKIP_SET_WAKE flag. Use return value from irq_set_irq_wake() and irq_chip_set_wake_parent() instead of always returning success. Fixes:e35a6ae0eb
("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1601267524-20199-3-git-send-email-mkshah@codeaurora.org
1445 lines
37 KiB
C
1445 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2013, Sony Mobile Communications AB.
|
|
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/qcom_scm.h>
|
|
|
|
#include <linux/soc/qcom/irq.h>
|
|
|
|
#include "../core.h"
|
|
#include "../pinconf.h"
|
|
#include "pinctrl-msm.h"
|
|
#include "../pinctrl-utils.h"
|
|
|
|
#define MAX_NR_GPIO 300
|
|
#define MAX_NR_TILES 4
|
|
#define PS_HOLD_OFFSET 0x820
|
|
|
|
/**
|
|
* struct msm_pinctrl - state for a pinctrl-msm device
|
|
* @dev: device handle.
|
|
* @pctrl: pinctrl handle.
|
|
* @chip: gpiochip handle.
|
|
* @desc: pin controller descriptor
|
|
* @restart_nb: restart notifier block.
|
|
* @irq_chip: irq chip information
|
|
* @irq: parent irq for the TLMM irq_chip.
|
|
* @intr_target_use_scm: route irq to application cpu using scm calls
|
|
* @lock: Spinlock to protect register resources as well
|
|
* as msm_pinctrl data structures.
|
|
* @enabled_irqs: Bitmap of currently enabled irqs.
|
|
* @dual_edge_irqs: Bitmap of irqs that need sw emulated dual edge
|
|
* detection.
|
|
* @skip_wake_irqs: Skip IRQs that are handled by wakeup interrupt controller
|
|
* @soc: Reference to soc_data of platform specific data.
|
|
* @regs: Base addresses for the TLMM tiles.
|
|
* @phys_base: Physical base address
|
|
*/
|
|
struct msm_pinctrl {
|
|
struct device *dev;
|
|
struct pinctrl_dev *pctrl;
|
|
struct gpio_chip chip;
|
|
struct pinctrl_desc desc;
|
|
struct notifier_block restart_nb;
|
|
|
|
struct irq_chip irq_chip;
|
|
int irq;
|
|
|
|
bool intr_target_use_scm;
|
|
|
|
raw_spinlock_t lock;
|
|
|
|
DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
|
|
DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
|
|
DECLARE_BITMAP(skip_wake_irqs, MAX_NR_GPIO);
|
|
|
|
const struct msm_pinctrl_soc_data *soc;
|
|
void __iomem *regs[MAX_NR_TILES];
|
|
u32 phys_base[MAX_NR_TILES];
|
|
};
|
|
|
|
#define MSM_ACCESSOR(name) \
|
|
static u32 msm_readl_##name(struct msm_pinctrl *pctrl, \
|
|
const struct msm_pingroup *g) \
|
|
{ \
|
|
return readl(pctrl->regs[g->tile] + g->name##_reg); \
|
|
} \
|
|
static void msm_writel_##name(u32 val, struct msm_pinctrl *pctrl, \
|
|
const struct msm_pingroup *g) \
|
|
{ \
|
|
writel(val, pctrl->regs[g->tile] + g->name##_reg); \
|
|
}
|
|
|
|
MSM_ACCESSOR(ctl)
|
|
MSM_ACCESSOR(io)
|
|
MSM_ACCESSOR(intr_cfg)
|
|
MSM_ACCESSOR(intr_status)
|
|
MSM_ACCESSOR(intr_target)
|
|
|
|
static int msm_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->soc->ngroups;
|
|
}
|
|
|
|
static const char *msm_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned group)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->soc->groups[group].name;
|
|
}
|
|
|
|
static int msm_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = pctrl->soc->groups[group].pins;
|
|
*num_pins = pctrl->soc->groups[group].npins;
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops msm_pinctrl_ops = {
|
|
.get_groups_count = msm_get_groups_count,
|
|
.get_group_name = msm_get_group_name,
|
|
.get_group_pins = msm_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
};
|
|
|
|
static int msm_pinmux_request(struct pinctrl_dev *pctldev, unsigned offset)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct gpio_chip *chip = &pctrl->chip;
|
|
|
|
return gpiochip_line_is_valid(chip, offset) ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int msm_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->soc->nfunctions;
|
|
}
|
|
|
|
static const char *msm_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned function)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->soc->functions[function].name;
|
|
}
|
|
|
|
static int msm_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned function,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = pctrl->soc->functions[function].groups;
|
|
*num_groups = pctrl->soc->functions[function].ngroups;
|
|
return 0;
|
|
}
|
|
|
|
static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned function,
|
|
unsigned group)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct msm_pingroup *g;
|
|
unsigned long flags;
|
|
u32 val, mask;
|
|
int i;
|
|
|
|
g = &pctrl->soc->groups[group];
|
|
mask = GENMASK(g->mux_bit + order_base_2(g->nfuncs) - 1, g->mux_bit);
|
|
|
|
for (i = 0; i < g->nfuncs; i++) {
|
|
if (g->funcs[i] == function)
|
|
break;
|
|
}
|
|
|
|
if (WARN_ON(i == g->nfuncs))
|
|
return -EINVAL;
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
val = msm_readl_ctl(pctrl, g);
|
|
val &= ~mask;
|
|
val |= i << g->mux_bit;
|
|
msm_writel_ctl(val, pctrl, g);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct msm_pingroup *g = &pctrl->soc->groups[offset];
|
|
|
|
/* No funcs? Probably ACPI so can't do anything here */
|
|
if (!g->nfuncs)
|
|
return 0;
|
|
|
|
/* For now assume function 0 is GPIO because it always is */
|
|
return msm_pinmux_set_mux(pctldev, g->funcs[0], offset);
|
|
}
|
|
|
|
static const struct pinmux_ops msm_pinmux_ops = {
|
|
.request = msm_pinmux_request,
|
|
.get_functions_count = msm_get_functions_count,
|
|
.get_function_name = msm_get_function_name,
|
|
.get_function_groups = msm_get_function_groups,
|
|
.gpio_request_enable = msm_pinmux_request_gpio,
|
|
.set_mux = msm_pinmux_set_mux,
|
|
};
|
|
|
|
static int msm_config_reg(struct msm_pinctrl *pctrl,
|
|
const struct msm_pingroup *g,
|
|
unsigned param,
|
|
unsigned *mask,
|
|
unsigned *bit)
|
|
{
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
*bit = g->pull_bit;
|
|
*mask = 3;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
*bit = g->od_bit;
|
|
*mask = 1;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
*bit = g->drv_bit;
|
|
*mask = 7;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
*bit = g->oe_bit;
|
|
*mask = 1;
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MSM_NO_PULL 0
|
|
#define MSM_PULL_DOWN 1
|
|
#define MSM_KEEPER 2
|
|
#define MSM_PULL_UP_NO_KEEPER 2
|
|
#define MSM_PULL_UP 3
|
|
|
|
static unsigned msm_regval_to_drive(u32 val)
|
|
{
|
|
return (val + 1) * 2;
|
|
}
|
|
|
|
static int msm_config_group_get(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
unsigned long *config)
|
|
{
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned param = pinconf_to_config_param(*config);
|
|
unsigned mask;
|
|
unsigned arg;
|
|
unsigned bit;
|
|
int ret;
|
|
u32 val;
|
|
|
|
g = &pctrl->soc->groups[group];
|
|
|
|
ret = msm_config_reg(pctrl, g, param, &mask, &bit);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = msm_readl_ctl(pctrl, g);
|
|
arg = (val >> bit) & mask;
|
|
|
|
/* Convert register value to pinconf value */
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
if (arg != MSM_NO_PULL)
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (arg != MSM_PULL_DOWN)
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
if (pctrl->soc->pull_no_keeper)
|
|
return -ENOTSUPP;
|
|
|
|
if (arg != MSM_KEEPER)
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (pctrl->soc->pull_no_keeper)
|
|
arg = arg == MSM_PULL_UP_NO_KEEPER;
|
|
else
|
|
arg = arg == MSM_PULL_UP;
|
|
if (!arg)
|
|
return -EINVAL;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
/* Pin is not open-drain */
|
|
if (!arg)
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
arg = msm_regval_to_drive(arg);
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
/* Pin is not output */
|
|
if (!arg)
|
|
return -EINVAL;
|
|
|
|
val = msm_readl_io(pctrl, g);
|
|
arg = !!(val & BIT(g->in_bit));
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
/* Pin is output */
|
|
if (arg)
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_config_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned long flags;
|
|
unsigned param;
|
|
unsigned mask;
|
|
unsigned arg;
|
|
unsigned bit;
|
|
int ret;
|
|
u32 val;
|
|
int i;
|
|
|
|
g = &pctrl->soc->groups[group];
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
ret = msm_config_reg(pctrl, g, param, &mask, &bit);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Convert pinconf values to register values */
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
arg = MSM_NO_PULL;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
arg = MSM_PULL_DOWN;
|
|
break;
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
if (pctrl->soc->pull_no_keeper)
|
|
return -ENOTSUPP;
|
|
|
|
arg = MSM_KEEPER;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (pctrl->soc->pull_no_keeper)
|
|
arg = MSM_PULL_UP_NO_KEEPER;
|
|
else
|
|
arg = MSM_PULL_UP;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
/* Check for invalid values */
|
|
if (arg > 16 || arg < 2 || (arg % 2) != 0)
|
|
arg = -1;
|
|
else
|
|
arg = (arg / 2) - 1;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
/* set output value */
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
val = msm_readl_io(pctrl, g);
|
|
if (arg)
|
|
val |= BIT(g->out_bit);
|
|
else
|
|
val &= ~BIT(g->out_bit);
|
|
msm_writel_io(val, pctrl, g);
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
|
|
/* enable output */
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
/* disable output */
|
|
arg = 0;
|
|
break;
|
|
default:
|
|
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
|
|
param);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Range-check user-supplied value */
|
|
if (arg & ~mask) {
|
|
dev_err(pctrl->dev, "config %x: %x is invalid\n", param, arg);
|
|
return -EINVAL;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
val = msm_readl_ctl(pctrl, g);
|
|
val &= ~(mask << bit);
|
|
val |= arg << bit;
|
|
msm_writel_ctl(val, pctrl, g);
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops msm_pinconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_group_get = msm_config_group_get,
|
|
.pin_config_group_set = msm_config_group_set,
|
|
};
|
|
|
|
static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
g = &pctrl->soc->groups[offset];
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
val = msm_readl_ctl(pctrl, g);
|
|
val &= ~BIT(g->oe_bit);
|
|
msm_writel_ctl(val, pctrl, g);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
g = &pctrl->soc->groups[offset];
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
val = msm_readl_io(pctrl, g);
|
|
if (value)
|
|
val |= BIT(g->out_bit);
|
|
else
|
|
val &= ~BIT(g->out_bit);
|
|
msm_writel_io(val, pctrl, g);
|
|
|
|
val = msm_readl_ctl(pctrl, g);
|
|
val |= BIT(g->oe_bit);
|
|
msm_writel_ctl(val, pctrl, g);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
|
|
const struct msm_pingroup *g;
|
|
u32 val;
|
|
|
|
g = &pctrl->soc->groups[offset];
|
|
|
|
val = msm_readl_ctl(pctrl, g);
|
|
|
|
return val & BIT(g->oe_bit) ? GPIO_LINE_DIRECTION_OUT :
|
|
GPIO_LINE_DIRECTION_IN;
|
|
}
|
|
|
|
static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
|
|
u32 val;
|
|
|
|
g = &pctrl->soc->groups[offset];
|
|
|
|
val = msm_readl_io(pctrl, g);
|
|
return !!(val & BIT(g->in_bit));
|
|
}
|
|
|
|
static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
g = &pctrl->soc->groups[offset];
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
val = msm_readl_io(pctrl, g);
|
|
if (value)
|
|
val |= BIT(g->out_bit);
|
|
else
|
|
val &= ~BIT(g->out_bit);
|
|
msm_writel_io(val, pctrl, g);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
#include <linux/seq_file.h>
|
|
|
|
static void msm_gpio_dbg_show_one(struct seq_file *s,
|
|
struct pinctrl_dev *pctldev,
|
|
struct gpio_chip *chip,
|
|
unsigned offset,
|
|
unsigned gpio)
|
|
{
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(chip);
|
|
unsigned func;
|
|
int is_out;
|
|
int drive;
|
|
int pull;
|
|
int val;
|
|
u32 ctl_reg, io_reg;
|
|
|
|
static const char * const pulls_keeper[] = {
|
|
"no pull",
|
|
"pull down",
|
|
"keeper",
|
|
"pull up"
|
|
};
|
|
|
|
static const char * const pulls_no_keeper[] = {
|
|
"no pull",
|
|
"pull down",
|
|
"pull up",
|
|
};
|
|
|
|
if (!gpiochip_line_is_valid(chip, offset))
|
|
return;
|
|
|
|
g = &pctrl->soc->groups[offset];
|
|
ctl_reg = msm_readl_ctl(pctrl, g);
|
|
io_reg = msm_readl_io(pctrl, g);
|
|
|
|
is_out = !!(ctl_reg & BIT(g->oe_bit));
|
|
func = (ctl_reg >> g->mux_bit) & 7;
|
|
drive = (ctl_reg >> g->drv_bit) & 7;
|
|
pull = (ctl_reg >> g->pull_bit) & 3;
|
|
|
|
if (is_out)
|
|
val = !!(io_reg & BIT(g->out_bit));
|
|
else
|
|
val = !!(io_reg & BIT(g->in_bit));
|
|
|
|
seq_printf(s, " %-8s: %-3s", g->name, is_out ? "out" : "in");
|
|
seq_printf(s, " %-4s func%d", val ? "high" : "low", func);
|
|
seq_printf(s, " %dmA", msm_regval_to_drive(drive));
|
|
if (pctrl->soc->pull_no_keeper)
|
|
seq_printf(s, " %s", pulls_no_keeper[pull]);
|
|
else
|
|
seq_printf(s, " %s", pulls_keeper[pull]);
|
|
seq_puts(s, "\n");
|
|
}
|
|
|
|
static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
unsigned gpio = chip->base;
|
|
unsigned i;
|
|
|
|
for (i = 0; i < chip->ngpio; i++, gpio++)
|
|
msm_gpio_dbg_show_one(s, NULL, chip, i, gpio);
|
|
}
|
|
|
|
#else
|
|
#define msm_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
static int msm_gpio_init_valid_mask(struct gpio_chip *gc,
|
|
unsigned long *valid_mask,
|
|
unsigned int ngpios)
|
|
{
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
int ret;
|
|
unsigned int len, i;
|
|
const int *reserved = pctrl->soc->reserved_gpios;
|
|
u16 *tmp;
|
|
|
|
/* Driver provided reserved list overrides DT and ACPI */
|
|
if (reserved) {
|
|
bitmap_fill(valid_mask, ngpios);
|
|
for (i = 0; reserved[i] >= 0; i++) {
|
|
if (i >= ngpios || reserved[i] >= ngpios) {
|
|
dev_err(pctrl->dev, "invalid list of reserved GPIOs\n");
|
|
return -EINVAL;
|
|
}
|
|
clear_bit(reserved[i], valid_mask);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The number of GPIOs in the ACPI tables */
|
|
len = ret = device_property_count_u16(pctrl->dev, "gpios");
|
|
if (ret < 0)
|
|
return 0;
|
|
|
|
if (ret > ngpios)
|
|
return -EINVAL;
|
|
|
|
tmp = kmalloc_array(len, sizeof(*tmp), GFP_KERNEL);
|
|
if (!tmp)
|
|
return -ENOMEM;
|
|
|
|
ret = device_property_read_u16_array(pctrl->dev, "gpios", tmp, len);
|
|
if (ret < 0) {
|
|
dev_err(pctrl->dev, "could not read list of GPIOs\n");
|
|
goto out;
|
|
}
|
|
|
|
bitmap_zero(valid_mask, ngpios);
|
|
for (i = 0; i < len; i++)
|
|
set_bit(tmp[i], valid_mask);
|
|
|
|
out:
|
|
kfree(tmp);
|
|
return ret;
|
|
}
|
|
|
|
static const struct gpio_chip msm_gpio_template = {
|
|
.direction_input = msm_gpio_direction_input,
|
|
.direction_output = msm_gpio_direction_output,
|
|
.get_direction = msm_gpio_get_direction,
|
|
.get = msm_gpio_get,
|
|
.set = msm_gpio_set,
|
|
.request = gpiochip_generic_request,
|
|
.free = gpiochip_generic_free,
|
|
.dbg_show = msm_gpio_dbg_show,
|
|
};
|
|
|
|
/* For dual-edge interrupts in software, since some hardware has no
|
|
* such support:
|
|
*
|
|
* At appropriate moments, this function may be called to flip the polarity
|
|
* settings of both-edge irq lines to try and catch the next edge.
|
|
*
|
|
* The attempt is considered successful if:
|
|
* - the status bit goes high, indicating that an edge was caught, or
|
|
* - the input value of the gpio doesn't change during the attempt.
|
|
* If the value changes twice during the process, that would cause the first
|
|
* test to fail but would force the second, as two opposite
|
|
* transitions would cause a detection no matter the polarity setting.
|
|
*
|
|
* The do-loop tries to sledge-hammer closed the timing hole between
|
|
* the initial value-read and the polarity-write - if the line value changes
|
|
* during that window, an interrupt is lost, the new polarity setting is
|
|
* incorrect, and the first success test will fail, causing a retry.
|
|
*
|
|
* Algorithm comes from Google's msmgpio driver.
|
|
*/
|
|
static void msm_gpio_update_dual_edge_pos(struct msm_pinctrl *pctrl,
|
|
const struct msm_pingroup *g,
|
|
struct irq_data *d)
|
|
{
|
|
int loop_limit = 100;
|
|
unsigned val, val2, intstat;
|
|
unsigned pol;
|
|
|
|
do {
|
|
val = msm_readl_io(pctrl, g) & BIT(g->in_bit);
|
|
|
|
pol = msm_readl_intr_cfg(pctrl, g);
|
|
pol ^= BIT(g->intr_polarity_bit);
|
|
msm_writel_intr_cfg(pol, pctrl, g);
|
|
|
|
val2 = msm_readl_io(pctrl, g) & BIT(g->in_bit);
|
|
intstat = msm_readl_intr_status(pctrl, g);
|
|
if (intstat || (val == val2))
|
|
return;
|
|
} while (loop_limit-- > 0);
|
|
dev_err(pctrl->dev, "dual-edge irq failed to stabilize, %#08x != %#08x\n",
|
|
val, val2);
|
|
}
|
|
|
|
static void msm_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
const struct msm_pingroup *g;
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
if (d->parent_data)
|
|
irq_chip_mask_parent(d);
|
|
|
|
if (test_bit(d->hwirq, pctrl->skip_wake_irqs))
|
|
return;
|
|
|
|
g = &pctrl->soc->groups[d->hwirq];
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
val = msm_readl_intr_cfg(pctrl, g);
|
|
/*
|
|
* There are two bits that control interrupt forwarding to the CPU. The
|
|
* RAW_STATUS_EN bit causes the level or edge sensed on the line to be
|
|
* latched into the interrupt status register when the hardware detects
|
|
* an irq that it's configured for (either edge for edge type or level
|
|
* for level type irq). The 'non-raw' status enable bit causes the
|
|
* hardware to assert the summary interrupt to the CPU if the latched
|
|
* status bit is set. There's a bug though, the edge detection logic
|
|
* seems to have a problem where toggling the RAW_STATUS_EN bit may
|
|
* cause the status bit to latch spuriously when there isn't any edge
|
|
* so we can't touch that bit for edge type irqs and we have to keep
|
|
* the bit set anyway so that edges are latched while the line is masked.
|
|
*
|
|
* To make matters more complicated, leaving the RAW_STATUS_EN bit
|
|
* enabled all the time causes level interrupts to re-latch into the
|
|
* status register because the level is still present on the line after
|
|
* we ack it. We clear the raw status enable bit during mask here and
|
|
* set the bit on unmask so the interrupt can't latch into the hardware
|
|
* while it's masked.
|
|
*/
|
|
if (irqd_get_trigger_type(d) & IRQ_TYPE_LEVEL_MASK)
|
|
val &= ~BIT(g->intr_raw_status_bit);
|
|
|
|
val &= ~BIT(g->intr_enable_bit);
|
|
msm_writel_intr_cfg(val, pctrl, g);
|
|
|
|
clear_bit(d->hwirq, pctrl->enabled_irqs);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
}
|
|
|
|
static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
const struct msm_pingroup *g;
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
if (d->parent_data)
|
|
irq_chip_unmask_parent(d);
|
|
|
|
if (test_bit(d->hwirq, pctrl->skip_wake_irqs))
|
|
return;
|
|
|
|
g = &pctrl->soc->groups[d->hwirq];
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
if (status_clear) {
|
|
/*
|
|
* clear the interrupt status bit before unmask to avoid
|
|
* any erroneous interrupts that would have got latched
|
|
* when the interrupt is not in use.
|
|
*/
|
|
val = msm_readl_intr_status(pctrl, g);
|
|
val &= ~BIT(g->intr_status_bit);
|
|
msm_writel_intr_status(val, pctrl, g);
|
|
}
|
|
|
|
val = msm_readl_intr_cfg(pctrl, g);
|
|
val |= BIT(g->intr_raw_status_bit);
|
|
val |= BIT(g->intr_enable_bit);
|
|
msm_writel_intr_cfg(val, pctrl, g);
|
|
|
|
set_bit(d->hwirq, pctrl->enabled_irqs);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
}
|
|
|
|
static void msm_gpio_irq_enable(struct irq_data *d)
|
|
{
|
|
/*
|
|
* Clear the interrupt that may be pending before we enable
|
|
* the line.
|
|
* This is especially a problem with the GPIOs routed to the
|
|
* PDC. These GPIOs are direct-connect interrupts to the GIC.
|
|
* Disabling the interrupt line at the PDC does not prevent
|
|
* the interrupt from being latched at the GIC. The state at
|
|
* GIC needs to be cleared before enabling.
|
|
*/
|
|
if (d->parent_data) {
|
|
irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, 0);
|
|
irq_chip_enable_parent(d);
|
|
}
|
|
|
|
msm_gpio_irq_clear_unmask(d, true);
|
|
}
|
|
|
|
static void msm_gpio_irq_disable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
|
|
if (d->parent_data)
|
|
irq_chip_disable_parent(d);
|
|
|
|
if (!test_bit(d->hwirq, pctrl->skip_wake_irqs))
|
|
msm_gpio_irq_mask(d);
|
|
}
|
|
|
|
static void msm_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
msm_gpio_irq_clear_unmask(d, false);
|
|
}
|
|
|
|
/**
|
|
* msm_gpio_update_dual_edge_parent() - Prime next edge for IRQs handled by parent.
|
|
* @d: The irq dta.
|
|
*
|
|
* This is much like msm_gpio_update_dual_edge_pos() but for IRQs that are
|
|
* normally handled by the parent irqchip. The logic here is slightly
|
|
* different due to what's easy to do with our parent, but in principle it's
|
|
* the same.
|
|
*/
|
|
static void msm_gpio_update_dual_edge_parent(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
const struct msm_pingroup *g = &pctrl->soc->groups[d->hwirq];
|
|
int loop_limit = 100;
|
|
unsigned int val;
|
|
unsigned int type;
|
|
|
|
/* Read the value and make a guess about what edge we need to catch */
|
|
val = msm_readl_io(pctrl, g) & BIT(g->in_bit);
|
|
type = val ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
|
|
|
|
do {
|
|
/* Set the parent to catch the next edge */
|
|
irq_chip_set_type_parent(d, type);
|
|
|
|
/*
|
|
* Possibly the line changed between when we last read "val"
|
|
* (and decided what edge we needed) and when set the edge.
|
|
* If the value didn't change (or changed and then changed
|
|
* back) then we're done.
|
|
*/
|
|
val = msm_readl_io(pctrl, g) & BIT(g->in_bit);
|
|
if (type == IRQ_TYPE_EDGE_RISING) {
|
|
if (!val)
|
|
return;
|
|
type = IRQ_TYPE_EDGE_FALLING;
|
|
} else if (type == IRQ_TYPE_EDGE_FALLING) {
|
|
if (val)
|
|
return;
|
|
type = IRQ_TYPE_EDGE_RISING;
|
|
}
|
|
} while (loop_limit-- > 0);
|
|
dev_warn_once(pctrl->dev, "dual-edge irq failed to stabilize\n");
|
|
}
|
|
|
|
static void msm_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
const struct msm_pingroup *g;
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
if (test_bit(d->hwirq, pctrl->skip_wake_irqs)) {
|
|
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
|
|
msm_gpio_update_dual_edge_parent(d);
|
|
return;
|
|
}
|
|
|
|
g = &pctrl->soc->groups[d->hwirq];
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
val = msm_readl_intr_status(pctrl, g);
|
|
if (g->intr_ack_high)
|
|
val |= BIT(g->intr_status_bit);
|
|
else
|
|
val &= ~BIT(g->intr_status_bit);
|
|
msm_writel_intr_status(val, pctrl, g);
|
|
|
|
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
|
|
msm_gpio_update_dual_edge_pos(pctrl, g, d);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
}
|
|
|
|
static bool msm_gpio_needs_dual_edge_parent_workaround(struct irq_data *d,
|
|
unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
|
|
return type == IRQ_TYPE_EDGE_BOTH &&
|
|
pctrl->soc->wakeirq_dual_edge_errata && d->parent_data &&
|
|
test_bit(d->hwirq, pctrl->skip_wake_irqs);
|
|
}
|
|
|
|
static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
const struct msm_pingroup *g;
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
if (msm_gpio_needs_dual_edge_parent_workaround(d, type)) {
|
|
set_bit(d->hwirq, pctrl->dual_edge_irqs);
|
|
irq_set_handler_locked(d, handle_fasteoi_ack_irq);
|
|
msm_gpio_update_dual_edge_parent(d);
|
|
return 0;
|
|
}
|
|
|
|
if (d->parent_data)
|
|
irq_chip_set_type_parent(d, type);
|
|
|
|
if (test_bit(d->hwirq, pctrl->skip_wake_irqs)) {
|
|
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
|
|
irq_set_handler_locked(d, handle_fasteoi_irq);
|
|
return 0;
|
|
}
|
|
|
|
g = &pctrl->soc->groups[d->hwirq];
|
|
|
|
raw_spin_lock_irqsave(&pctrl->lock, flags);
|
|
|
|
/*
|
|
* For hw without possibility of detecting both edges
|
|
*/
|
|
if (g->intr_detection_width == 1 && type == IRQ_TYPE_EDGE_BOTH)
|
|
set_bit(d->hwirq, pctrl->dual_edge_irqs);
|
|
else
|
|
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
|
|
|
|
/* Route interrupts to application cpu.
|
|
* With intr_target_use_scm interrupts are routed to
|
|
* application cpu using scm calls.
|
|
*/
|
|
if (pctrl->intr_target_use_scm) {
|
|
u32 addr = pctrl->phys_base[0] + g->intr_target_reg;
|
|
int ret;
|
|
|
|
qcom_scm_io_readl(addr, &val);
|
|
|
|
val &= ~(7 << g->intr_target_bit);
|
|
val |= g->intr_target_kpss_val << g->intr_target_bit;
|
|
|
|
ret = qcom_scm_io_writel(addr, val);
|
|
if (ret)
|
|
dev_err(pctrl->dev,
|
|
"Failed routing %lu interrupt to Apps proc",
|
|
d->hwirq);
|
|
} else {
|
|
val = msm_readl_intr_target(pctrl, g);
|
|
val &= ~(7 << g->intr_target_bit);
|
|
val |= g->intr_target_kpss_val << g->intr_target_bit;
|
|
msm_writel_intr_target(val, pctrl, g);
|
|
}
|
|
|
|
/* Update configuration for gpio.
|
|
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
|
|
* internal circuitry of TLMM, toggling the RAW_STATUS
|
|
* could cause the INTR_STATUS to be set for EDGE interrupts.
|
|
*/
|
|
val = msm_readl_intr_cfg(pctrl, g);
|
|
val |= BIT(g->intr_raw_status_bit);
|
|
if (g->intr_detection_width == 2) {
|
|
val &= ~(3 << g->intr_detection_bit);
|
|
val &= ~(1 << g->intr_polarity_bit);
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
val |= 1 << g->intr_detection_bit;
|
|
val |= BIT(g->intr_polarity_bit);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
val |= 2 << g->intr_detection_bit;
|
|
val |= BIT(g->intr_polarity_bit);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
val |= 3 << g->intr_detection_bit;
|
|
val |= BIT(g->intr_polarity_bit);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
val |= BIT(g->intr_polarity_bit);
|
|
break;
|
|
}
|
|
} else if (g->intr_detection_width == 1) {
|
|
val &= ~(1 << g->intr_detection_bit);
|
|
val &= ~(1 << g->intr_polarity_bit);
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
val |= BIT(g->intr_detection_bit);
|
|
val |= BIT(g->intr_polarity_bit);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
val |= BIT(g->intr_detection_bit);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
val |= BIT(g->intr_detection_bit);
|
|
val |= BIT(g->intr_polarity_bit);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
val |= BIT(g->intr_polarity_bit);
|
|
break;
|
|
}
|
|
} else {
|
|
BUG();
|
|
}
|
|
msm_writel_intr_cfg(val, pctrl, g);
|
|
|
|
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
|
|
msm_gpio_update_dual_edge_pos(pctrl, g, d);
|
|
|
|
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
|
|
|
|
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
|
|
/*
|
|
* While they may not wake up when the TLMM is powered off,
|
|
* some GPIOs would like to wakeup the system from suspend
|
|
* when TLMM is powered on. To allow that, enable the GPIO
|
|
* summary line to be wakeup capable at GIC.
|
|
*/
|
|
if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
|
|
return irq_chip_set_wake_parent(d, on);
|
|
|
|
return irq_set_irq_wake(pctrl->irq, on);
|
|
}
|
|
|
|
static int msm_gpio_irq_reqres(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
int ret;
|
|
|
|
if (!try_module_get(gc->owner))
|
|
return -ENODEV;
|
|
|
|
ret = msm_pinmux_request_gpio(pctrl->pctrl, NULL, d->hwirq);
|
|
if (ret)
|
|
goto out;
|
|
msm_gpio_direction_input(gc, d->hwirq);
|
|
|
|
if (gpiochip_lock_as_irq(gc, d->hwirq)) {
|
|
dev_err(gc->parent,
|
|
"unable to lock HW IRQ %lu for IRQ\n",
|
|
d->hwirq);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
return 0;
|
|
out:
|
|
module_put(gc->owner);
|
|
return ret;
|
|
}
|
|
|
|
static void msm_gpio_irq_relres(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
|
|
gpiochip_unlock_as_irq(gc, d->hwirq);
|
|
module_put(gc->owner);
|
|
}
|
|
|
|
static int msm_gpio_irq_set_affinity(struct irq_data *d,
|
|
const struct cpumask *dest, bool force)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
|
|
if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
|
|
return irq_chip_set_affinity_parent(d, dest, force);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_gpio_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu_info)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
|
|
if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
|
|
return irq_chip_set_vcpu_affinity_parent(d, vcpu_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void msm_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
const struct msm_pingroup *g;
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
int irq_pin;
|
|
int handled = 0;
|
|
u32 val;
|
|
int i;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
/*
|
|
* Each pin has it's own IRQ status register, so use
|
|
* enabled_irq bitmap to limit the number of reads.
|
|
*/
|
|
for_each_set_bit(i, pctrl->enabled_irqs, pctrl->chip.ngpio) {
|
|
g = &pctrl->soc->groups[i];
|
|
val = msm_readl_intr_status(pctrl, g);
|
|
if (val & BIT(g->intr_status_bit)) {
|
|
irq_pin = irq_find_mapping(gc->irq.domain, i);
|
|
generic_handle_irq(irq_pin);
|
|
handled++;
|
|
}
|
|
}
|
|
|
|
/* No interrupts were flagged */
|
|
if (handled == 0)
|
|
handle_bad_irq(desc);
|
|
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static int msm_gpio_wakeirq(struct gpio_chip *gc,
|
|
unsigned int child,
|
|
unsigned int child_type,
|
|
unsigned int *parent,
|
|
unsigned int *parent_type)
|
|
{
|
|
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
|
|
const struct msm_gpio_wakeirq_map *map;
|
|
int i;
|
|
|
|
*parent = GPIO_NO_WAKE_IRQ;
|
|
*parent_type = IRQ_TYPE_EDGE_RISING;
|
|
|
|
for (i = 0; i < pctrl->soc->nwakeirq_map; i++) {
|
|
map = &pctrl->soc->wakeirq_map[i];
|
|
if (map->gpio == child) {
|
|
*parent = map->wakeirq;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
|
|
{
|
|
if (pctrl->soc->reserved_gpios)
|
|
return true;
|
|
|
|
return device_property_count_u16(pctrl->dev, "gpios") > 0;
|
|
}
|
|
|
|
static int msm_gpio_init(struct msm_pinctrl *pctrl)
|
|
{
|
|
struct gpio_chip *chip;
|
|
struct gpio_irq_chip *girq;
|
|
int i, ret;
|
|
unsigned gpio, ngpio = pctrl->soc->ngpios;
|
|
struct device_node *np;
|
|
bool skip;
|
|
|
|
if (WARN_ON(ngpio > MAX_NR_GPIO))
|
|
return -EINVAL;
|
|
|
|
chip = &pctrl->chip;
|
|
chip->base = -1;
|
|
chip->ngpio = ngpio;
|
|
chip->label = dev_name(pctrl->dev);
|
|
chip->parent = pctrl->dev;
|
|
chip->owner = THIS_MODULE;
|
|
chip->of_node = pctrl->dev->of_node;
|
|
if (msm_gpio_needs_valid_mask(pctrl))
|
|
chip->init_valid_mask = msm_gpio_init_valid_mask;
|
|
|
|
pctrl->irq_chip.name = "msmgpio";
|
|
pctrl->irq_chip.irq_enable = msm_gpio_irq_enable;
|
|
pctrl->irq_chip.irq_disable = msm_gpio_irq_disable;
|
|
pctrl->irq_chip.irq_mask = msm_gpio_irq_mask;
|
|
pctrl->irq_chip.irq_unmask = msm_gpio_irq_unmask;
|
|
pctrl->irq_chip.irq_ack = msm_gpio_irq_ack;
|
|
pctrl->irq_chip.irq_set_type = msm_gpio_irq_set_type;
|
|
pctrl->irq_chip.irq_set_wake = msm_gpio_irq_set_wake;
|
|
pctrl->irq_chip.irq_request_resources = msm_gpio_irq_reqres;
|
|
pctrl->irq_chip.irq_release_resources = msm_gpio_irq_relres;
|
|
pctrl->irq_chip.irq_set_affinity = msm_gpio_irq_set_affinity;
|
|
pctrl->irq_chip.irq_set_vcpu_affinity = msm_gpio_irq_set_vcpu_affinity;
|
|
pctrl->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND |
|
|
IRQCHIP_SET_TYPE_MASKED;
|
|
|
|
np = of_parse_phandle(pctrl->dev->of_node, "wakeup-parent", 0);
|
|
if (np) {
|
|
chip->irq.parent_domain = irq_find_matching_host(np,
|
|
DOMAIN_BUS_WAKEUP);
|
|
of_node_put(np);
|
|
if (!chip->irq.parent_domain)
|
|
return -EPROBE_DEFER;
|
|
chip->irq.child_to_parent_hwirq = msm_gpio_wakeirq;
|
|
pctrl->irq_chip.irq_eoi = irq_chip_eoi_parent;
|
|
/*
|
|
* Let's skip handling the GPIOs, if the parent irqchip
|
|
* is handling the direct connect IRQ of the GPIO.
|
|
*/
|
|
skip = irq_domain_qcom_handle_wakeup(chip->irq.parent_domain);
|
|
for (i = 0; skip && i < pctrl->soc->nwakeirq_map; i++) {
|
|
gpio = pctrl->soc->wakeirq_map[i].gpio;
|
|
set_bit(gpio, pctrl->skip_wake_irqs);
|
|
}
|
|
}
|
|
|
|
girq = &chip->irq;
|
|
girq->chip = &pctrl->irq_chip;
|
|
girq->parent_handler = msm_gpio_irq_handler;
|
|
girq->fwnode = pctrl->dev->fwnode;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(pctrl->dev, 1, sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_bad_irq;
|
|
girq->parents[0] = pctrl->irq;
|
|
|
|
ret = gpiochip_add_data(&pctrl->chip, pctrl);
|
|
if (ret) {
|
|
dev_err(pctrl->dev, "Failed register gpiochip\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* For DeviceTree-supported systems, the gpio core checks the
|
|
* pinctrl's device node for the "gpio-ranges" property.
|
|
* If it is present, it takes care of adding the pin ranges
|
|
* for the driver. In this case the driver can skip ahead.
|
|
*
|
|
* In order to remain compatible with older, existing DeviceTree
|
|
* files which don't set the "gpio-ranges" property or systems that
|
|
* utilize ACPI the driver has to call gpiochip_add_pin_range().
|
|
*/
|
|
if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) {
|
|
ret = gpiochip_add_pin_range(&pctrl->chip,
|
|
dev_name(pctrl->dev), 0, 0, chip->ngpio);
|
|
if (ret) {
|
|
dev_err(pctrl->dev, "Failed to add pin range\n");
|
|
gpiochip_remove(&pctrl->chip);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_ps_hold_restart(struct notifier_block *nb, unsigned long action,
|
|
void *data)
|
|
{
|
|
struct msm_pinctrl *pctrl = container_of(nb, struct msm_pinctrl, restart_nb);
|
|
|
|
writel(0, pctrl->regs[0] + PS_HOLD_OFFSET);
|
|
mdelay(1000);
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct msm_pinctrl *poweroff_pctrl;
|
|
|
|
static void msm_ps_hold_poweroff(void)
|
|
{
|
|
msm_ps_hold_restart(&poweroff_pctrl->restart_nb, 0, NULL);
|
|
}
|
|
|
|
static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
|
|
{
|
|
int i;
|
|
const struct msm_function *func = pctrl->soc->functions;
|
|
|
|
for (i = 0; i < pctrl->soc->nfunctions; i++)
|
|
if (!strcmp(func[i].name, "ps_hold")) {
|
|
pctrl->restart_nb.notifier_call = msm_ps_hold_restart;
|
|
pctrl->restart_nb.priority = 128;
|
|
if (register_restart_handler(&pctrl->restart_nb))
|
|
dev_err(pctrl->dev,
|
|
"failed to setup restart handler.\n");
|
|
poweroff_pctrl = pctrl;
|
|
pm_power_off = msm_ps_hold_poweroff;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static __maybe_unused int msm_pinctrl_suspend(struct device *dev)
|
|
{
|
|
struct msm_pinctrl *pctrl = dev_get_drvdata(dev);
|
|
|
|
return pinctrl_force_sleep(pctrl->pctrl);
|
|
}
|
|
|
|
static __maybe_unused int msm_pinctrl_resume(struct device *dev)
|
|
{
|
|
struct msm_pinctrl *pctrl = dev_get_drvdata(dev);
|
|
|
|
return pinctrl_force_default(pctrl->pctrl);
|
|
}
|
|
|
|
SIMPLE_DEV_PM_OPS(msm_pinctrl_dev_pm_ops, msm_pinctrl_suspend,
|
|
msm_pinctrl_resume);
|
|
|
|
EXPORT_SYMBOL(msm_pinctrl_dev_pm_ops);
|
|
|
|
int msm_pinctrl_probe(struct platform_device *pdev,
|
|
const struct msm_pinctrl_soc_data *soc_data)
|
|
{
|
|
struct msm_pinctrl *pctrl;
|
|
struct resource *res;
|
|
int ret;
|
|
int i;
|
|
|
|
pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
|
|
if (!pctrl)
|
|
return -ENOMEM;
|
|
|
|
pctrl->dev = &pdev->dev;
|
|
pctrl->soc = soc_data;
|
|
pctrl->chip = msm_gpio_template;
|
|
pctrl->intr_target_use_scm = of_device_is_compatible(
|
|
pctrl->dev->of_node,
|
|
"qcom,ipq8064-pinctrl");
|
|
|
|
raw_spin_lock_init(&pctrl->lock);
|
|
|
|
if (soc_data->tiles) {
|
|
for (i = 0; i < soc_data->ntiles; i++) {
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
soc_data->tiles[i]);
|
|
pctrl->regs[i] = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(pctrl->regs[i]))
|
|
return PTR_ERR(pctrl->regs[i]);
|
|
}
|
|
} else {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pctrl->regs[0] = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(pctrl->regs[0]))
|
|
return PTR_ERR(pctrl->regs[0]);
|
|
|
|
pctrl->phys_base[0] = res->start;
|
|
}
|
|
|
|
msm_pinctrl_setup_pm_reset(pctrl);
|
|
|
|
pctrl->irq = platform_get_irq(pdev, 0);
|
|
if (pctrl->irq < 0)
|
|
return pctrl->irq;
|
|
|
|
pctrl->desc.owner = THIS_MODULE;
|
|
pctrl->desc.pctlops = &msm_pinctrl_ops;
|
|
pctrl->desc.pmxops = &msm_pinmux_ops;
|
|
pctrl->desc.confops = &msm_pinconf_ops;
|
|
pctrl->desc.name = dev_name(&pdev->dev);
|
|
pctrl->desc.pins = pctrl->soc->pins;
|
|
pctrl->desc.npins = pctrl->soc->npins;
|
|
|
|
pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &pctrl->desc, pctrl);
|
|
if (IS_ERR(pctrl->pctrl)) {
|
|
dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
|
|
return PTR_ERR(pctrl->pctrl);
|
|
}
|
|
|
|
ret = msm_gpio_init(pctrl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, pctrl);
|
|
|
|
dev_dbg(&pdev->dev, "Probed Qualcomm pinctrl driver\n");
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(msm_pinctrl_probe);
|
|
|
|
int msm_pinctrl_remove(struct platform_device *pdev)
|
|
{
|
|
struct msm_pinctrl *pctrl = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&pctrl->chip);
|
|
|
|
unregister_restart_handler(&pctrl->restart_nb);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(msm_pinctrl_remove);
|
|
|