linux/arch/x86/kvm/Kconfig
Linus Torvalds 36824f198c ARM:
- Add MTE support in guests, complete with tag save/restore interface
 
 - Reduce the impact of CMOs by moving them in the page-table code
 
 - Allow device block mappings at stage-2
 
 - Reduce the footprint of the vmemmap in protected mode
 
 - Support the vGIC on dumb systems such as the Apple M1
 
 - Add selftest infrastructure to support multiple configuration
   and apply that to PMU/non-PMU setups
 
 - Add selftests for the debug architecture
 
 - The usual crop of PMU fixes
 
 PPC:
 
 - Support for the H_RPT_INVALIDATE hypercall
 
 - Conversion of Book3S entry/exit to C
 
 - Bug fixes
 
 S390:
 
 - new HW facilities for guests
 
 - make inline assembly more robust with KASAN and co
 
 x86:
 
 - Allow userspace to handle emulation errors (unknown instructions)
 
 - Lazy allocation of the rmap (host physical -> guest physical address)
 
 - Support for virtualizing TSC scaling on VMX machines
 
 - Optimizations to avoid shattering huge pages at the beginning of live migration
 
 - Support for initializing the PDPTRs without loading them from memory
 
 - Many TLB flushing cleanups
 
 - Refuse to load if two-stage paging is available but NX is not (this has
   been a requirement in practice for over a year)
 
 - A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
   CR0/CR4/EFER, using the MMU mode everywhere once it is computed
   from the CPU registers
 
 - Use PM notifier to notify the guest about host suspend or hibernate
 
 - Support for passing arguments to Hyper-V hypercalls using XMM registers
 
 - Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on
   AMD processors
 
 - Hide Hyper-V hypercalls that are not included in the guest CPUID
 
 - Fixes for live migration of virtual machines that use the Hyper-V
   "enlightened VMCS" optimization of nested virtualization
 
 - Bugfixes (not many)
 
 Generic:
 
 - Support for retrieving statistics without debugfs
 
 - Cleanups for the KVM selftests API
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDV9UYUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOIRgf/XX8fKLh24RnTOs2ldIu2AfRGVrT4
 QMrr8MxhmtukBAszk2xKvBt8/6gkUjdaIC3xqEnVjxaDaUvZaEtP7CQlF5JV45rn
 iv1zyxUKucXrnIOr+gCioIT7qBlh207zV35ArKioP9Y83cWx9uAs22pfr6g+7RxO
 h8bJZlJbSG6IGr3voANCIb9UyjU1V/l8iEHqRwhmr/A5rARPfD7g8lfMEQeGkzX6
 +/UydX2fumB3tl8e2iMQj6vLVdSOsCkehvpHK+Z33EpkKhan7GwZ2sZ05WmXV/nY
 QLAYfD10KegoNWl5Ay4GTp4hEAIYVrRJCLC+wnLdc0U8udbfCuTC31LK4w==
 =NcRh
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "This covers all architectures (except MIPS) so I don't expect any
  other feature pull requests this merge window.

  ARM:

   - Add MTE support in guests, complete with tag save/restore interface

   - Reduce the impact of CMOs by moving them in the page-table code

   - Allow device block mappings at stage-2

   - Reduce the footprint of the vmemmap in protected mode

   - Support the vGIC on dumb systems such as the Apple M1

   - Add selftest infrastructure to support multiple configuration and
     apply that to PMU/non-PMU setups

   - Add selftests for the debug architecture

   - The usual crop of PMU fixes

  PPC:

   - Support for the H_RPT_INVALIDATE hypercall

   - Conversion of Book3S entry/exit to C

   - Bug fixes

  S390:

   - new HW facilities for guests

   - make inline assembly more robust with KASAN and co

  x86:

   - Allow userspace to handle emulation errors (unknown instructions)

   - Lazy allocation of the rmap (host physical -> guest physical
     address)

   - Support for virtualizing TSC scaling on VMX machines

   - Optimizations to avoid shattering huge pages at the beginning of
     live migration

   - Support for initializing the PDPTRs without loading them from
     memory

   - Many TLB flushing cleanups

   - Refuse to load if two-stage paging is available but NX is not (this
     has been a requirement in practice for over a year)

   - A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
     CR0/CR4/EFER, using the MMU mode everywhere once it is computed
     from the CPU registers

   - Use PM notifier to notify the guest about host suspend or hibernate

   - Support for passing arguments to Hyper-V hypercalls using XMM
     registers

   - Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap
     on AMD processors

   - Hide Hyper-V hypercalls that are not included in the guest CPUID

   - Fixes for live migration of virtual machines that use the Hyper-V
     "enlightened VMCS" optimization of nested virtualization

   - Bugfixes (not many)

  Generic:

   - Support for retrieving statistics without debugfs

   - Cleanups for the KVM selftests API"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits)
  KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled
  kvm: x86: disable the narrow guest module parameter on unload
  selftests: kvm: Allows userspace to handle emulation errors.
  kvm: x86: Allow userspace to handle emulation errors
  KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on
  KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault
  KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault
  KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT
  KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic
  KVM: x86: Enhance comments for MMU roles and nested transition trickiness
  KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE
  KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU
  KVM: x86/mmu: Use MMU's role to determine PTTYPE
  KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers
  KVM: x86/mmu: Add a helper to calculate root from role_regs
  KVM: x86/mmu: Add helper to update paging metadata
  KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0
  KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls
  KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper
  KVM: x86/mmu: Get nested MMU's root level from the MMU's role
  ...
2021-06-28 15:40:51 -07:00

133 lines
3.6 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0
#
# KVM configuration
#
source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
bool "Virtualization"
depends on HAVE_KVM || X86
default y
help
Say Y here to get to see options for using your Linux host to run other
operating systems inside virtual machines (guests).
This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if VIRTUALIZATION
config KVM
tristate "Kernel-based Virtual Machine (KVM) support"
depends on HAVE_KVM
depends on HIGH_RES_TIMERS
depends on X86_LOCAL_APIC
select PREEMPT_NOTIFIERS
select MMU_NOTIFIER
select HAVE_KVM_IRQCHIP
select HAVE_KVM_IRQFD
select IRQ_BYPASS_MANAGER
select HAVE_KVM_IRQ_BYPASS
select HAVE_KVM_IRQ_ROUTING
select HAVE_KVM_EVENTFD
select KVM_ASYNC_PF
select USER_RETURN_NOTIFIER
select KVM_MMIO
select SCHED_INFO
select PERF_EVENTS
select HAVE_KVM_MSI
select HAVE_KVM_CPU_RELAX_INTERCEPT
select HAVE_KVM_NO_POLL
select KVM_XFER_TO_GUEST_WORK
select KVM_GENERIC_DIRTYLOG_READ_PROTECT
select KVM_VFIO
select SRCU
select HAVE_KVM_PM_NOTIFIER if PM
help
Support hosting fully virtualized guest machines using hardware
virtualization extensions. You will need a fairly recent
processor equipped with virtualization extensions. You will also
need to select one or more of the processor modules below.
This module provides access to the hardware capabilities through
a character device node named /dev/kvm.
To compile this as a module, choose M here: the module
will be called kvm.
If unsure, say N.
config KVM_WERROR
bool "Compile KVM with -Werror"
# KASAN may cause the build to fail due to larger frames
default y if X86_64 && !KASAN
# We use the dependency on !COMPILE_TEST to not be enabled
# blindly in allmodconfig or allyesconfig configurations
depends on KVM
depends on (X86_64 && !KASAN) || !COMPILE_TEST
depends on EXPERT
help
Add -Werror to the build flags for KVM.
If in doubt, say "N".
config KVM_INTEL
tristate "KVM for Intel (and compatible) processors support"
depends on KVM && IA32_FEAT_CTL
help
Provides support for KVM on processors equipped with Intel's VT
extensions, a.k.a. Virtual Machine Extensions (VMX).
To compile this as a module, choose M here: the module
will be called kvm-intel.
config X86_SGX_KVM
bool "Software Guard eXtensions (SGX) Virtualization"
depends on X86_SGX && KVM_INTEL
help
Enables KVM guests to create SGX enclaves.
This includes support to expose "raw" unreclaimable enclave memory to
guests via a device node, e.g. /dev/sgx_vepc.
If unsure, say N.
config KVM_AMD
tristate "KVM for AMD processors support"
depends on KVM
help
Provides support for KVM on AMD processors equipped with the AMD-V
(SVM) extensions.
To compile this as a module, choose M here: the module
will be called kvm-amd.
config KVM_AMD_SEV
def_bool y
bool "AMD Secure Encrypted Virtualization (SEV) support"
depends on KVM_AMD && X86_64
depends on CRYPTO_DEV_SP_PSP && !(KVM_AMD=y && CRYPTO_DEV_CCP_DD=m)
help
Provides support for launching Encrypted VMs (SEV) and Encrypted VMs
with Encrypted State (SEV-ES) on AMD processors.
config KVM_XEN
bool "Support for Xen hypercall interface"
depends on KVM
help
Provides KVM support for the hosting Xen HVM guests and
passing Xen hypercalls to userspace.
If in doubt, say "N".
config KVM_MMU_AUDIT
bool "Audit KVM MMU"
depends on KVM && TRACEPOINTS
help
This option adds a R/W kVM module parameter 'mmu_audit', which allows
auditing of KVM MMU events at runtime.
endif # VIRTUALIZATION