mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 16:44:27 +08:00
c8c525b06f
While it is useful to build all of the CCU drivers at once, only 1-3 of them will be loaded at a time, or possibly none of them if the kernel is booted on a non-sunxi platform. These CCU drivers are relatively large; 32-bit drivers have 30-50k of data each, while the 64-bit ones are 50-75k due to the increased pointer overhead. About half of that data comes from relocations. Let's allow the user to build these drivers as modules so only the necessary data is loaded. As a first step, convert the CCUs that are already platform drivers. When the drivers are built as modules, normally the file name becomes the module name. However, the current file names are inconsistent with the <platform>-<peripheral> name used everywhere else: the devicetree bindings, the platform driver names, and the Kconfig symbols. Use Makfile logic to rename the modules so they follow the usual pattern. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-3-samuel@sholland.org
145 lines
4.1 KiB
C
145 lines
4.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "ccu_common.h"
|
|
#include "ccu_gate.h"
|
|
#include "ccu_reset.h"
|
|
|
|
#include "ccu-sun9i-a80-usb.h"
|
|
|
|
static const struct clk_parent_data clk_parent_hosc[] = {
|
|
{ .fw_name = "hosc" },
|
|
};
|
|
|
|
static const struct clk_parent_data clk_parent_bus[] = {
|
|
{ .fw_name = "bus" },
|
|
};
|
|
|
|
static SUNXI_CCU_GATE_DATA(bus_hci0_clk, "bus-hci0", clk_parent_bus, 0x0, BIT(1), 0);
|
|
static SUNXI_CCU_GATE_DATA(usb_ohci0_clk, "usb-ohci0", clk_parent_hosc, 0x0, BIT(2), 0);
|
|
static SUNXI_CCU_GATE_DATA(bus_hci1_clk, "bus-hci1", clk_parent_bus, 0x0, BIT(3), 0);
|
|
static SUNXI_CCU_GATE_DATA(bus_hci2_clk, "bus-hci2", clk_parent_bus, 0x0, BIT(5), 0);
|
|
static SUNXI_CCU_GATE_DATA(usb_ohci2_clk, "usb-ohci2", clk_parent_hosc, 0x0, BIT(6), 0);
|
|
|
|
static SUNXI_CCU_GATE_DATA(usb0_phy_clk, "usb0-phy", clk_parent_hosc, 0x4, BIT(1), 0);
|
|
static SUNXI_CCU_GATE_DATA(usb1_hsic_clk, "usb1-hsic", clk_parent_hosc, 0x4, BIT(2), 0);
|
|
static SUNXI_CCU_GATE_DATA(usb1_phy_clk, "usb1-phy", clk_parent_hosc, 0x4, BIT(3), 0);
|
|
static SUNXI_CCU_GATE_DATA(usb2_hsic_clk, "usb2-hsic", clk_parent_hosc, 0x4, BIT(4), 0);
|
|
static SUNXI_CCU_GATE_DATA(usb2_phy_clk, "usb2-phy", clk_parent_hosc, 0x4, BIT(5), 0);
|
|
static SUNXI_CCU_GATE_DATA(usb_hsic_clk, "usb-hsic", clk_parent_hosc, 0x4, BIT(10), 0);
|
|
|
|
static struct ccu_common *sun9i_a80_usb_clks[] = {
|
|
&bus_hci0_clk.common,
|
|
&usb_ohci0_clk.common,
|
|
&bus_hci1_clk.common,
|
|
&bus_hci2_clk.common,
|
|
&usb_ohci2_clk.common,
|
|
|
|
&usb0_phy_clk.common,
|
|
&usb1_hsic_clk.common,
|
|
&usb1_phy_clk.common,
|
|
&usb2_hsic_clk.common,
|
|
&usb2_phy_clk.common,
|
|
&usb_hsic_clk.common,
|
|
};
|
|
|
|
static struct clk_hw_onecell_data sun9i_a80_usb_hw_clks = {
|
|
.hws = {
|
|
[CLK_BUS_HCI0] = &bus_hci0_clk.common.hw,
|
|
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
|
|
[CLK_BUS_HCI1] = &bus_hci1_clk.common.hw,
|
|
[CLK_BUS_HCI2] = &bus_hci2_clk.common.hw,
|
|
[CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
|
|
|
|
[CLK_USB0_PHY] = &usb0_phy_clk.common.hw,
|
|
[CLK_USB1_HSIC] = &usb1_hsic_clk.common.hw,
|
|
[CLK_USB1_PHY] = &usb1_phy_clk.common.hw,
|
|
[CLK_USB2_HSIC] = &usb2_hsic_clk.common.hw,
|
|
[CLK_USB2_PHY] = &usb2_phy_clk.common.hw,
|
|
[CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
|
|
},
|
|
.num = CLK_NUMBER,
|
|
};
|
|
|
|
static struct ccu_reset_map sun9i_a80_usb_resets[] = {
|
|
[RST_USB0_HCI] = { 0x0, BIT(17) },
|
|
[RST_USB1_HCI] = { 0x0, BIT(18) },
|
|
[RST_USB2_HCI] = { 0x0, BIT(19) },
|
|
|
|
[RST_USB0_PHY] = { 0x4, BIT(17) },
|
|
[RST_USB1_HSIC] = { 0x4, BIT(18) },
|
|
[RST_USB1_PHY] = { 0x4, BIT(19) },
|
|
[RST_USB2_HSIC] = { 0x4, BIT(20) },
|
|
[RST_USB2_PHY] = { 0x4, BIT(21) },
|
|
};
|
|
|
|
static const struct sunxi_ccu_desc sun9i_a80_usb_clk_desc = {
|
|
.ccu_clks = sun9i_a80_usb_clks,
|
|
.num_ccu_clks = ARRAY_SIZE(sun9i_a80_usb_clks),
|
|
|
|
.hw_clks = &sun9i_a80_usb_hw_clks,
|
|
|
|
.resets = sun9i_a80_usb_resets,
|
|
.num_resets = ARRAY_SIZE(sun9i_a80_usb_resets),
|
|
};
|
|
|
|
static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
|
|
{
|
|
struct clk *bus_clk;
|
|
void __iomem *reg;
|
|
int ret;
|
|
|
|
reg = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
bus_clk = devm_clk_get(&pdev->dev, "bus");
|
|
if (IS_ERR(bus_clk)) {
|
|
ret = PTR_ERR(bus_clk);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* The bus clock needs to be enabled for us to access the registers */
|
|
ret = clk_prepare_enable(bus_clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun9i_a80_usb_clk_desc);
|
|
if (ret)
|
|
goto err_disable_clk;
|
|
|
|
return 0;
|
|
|
|
err_disable_clk:
|
|
clk_disable_unprepare(bus_clk);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id sun9i_a80_usb_clk_ids[] = {
|
|
{ .compatible = "allwinner,sun9i-a80-usb-clks" },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver sun9i_a80_usb_clk_driver = {
|
|
.probe = sun9i_a80_usb_clk_probe,
|
|
.driver = {
|
|
.name = "sun9i-a80-usb-clks",
|
|
.of_match_table = sun9i_a80_usb_clk_ids,
|
|
},
|
|
};
|
|
module_platform_driver(sun9i_a80_usb_clk_driver);
|
|
|
|
MODULE_IMPORT_NS(SUNXI_CCU);
|
|
MODULE_LICENSE("GPL");
|