mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 16:44:27 +08:00
c8c525b06f
While it is useful to build all of the CCU drivers at once, only 1-3 of them will be loaded at a time, or possibly none of them if the kernel is booted on a non-sunxi platform. These CCU drivers are relatively large; 32-bit drivers have 30-50k of data each, while the 64-bit ones are 50-75k due to the increased pointer overhead. About half of that data comes from relocations. Let's allow the user to build these drivers as modules so only the necessary data is loaded. As a first step, convert the CCUs that are already platform drivers. When the drivers are built as modules, normally the file name becomes the module name. However, the current file names are inconsistent with the <platform>-<peripheral> name used everywhere else: the devicetree bindings, the platform driver names, and the Kconfig symbols. Use Makfile logic to rename the modules so they follow the usual pattern. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-3-samuel@sholland.org
1280 lines
39 KiB
C
1280 lines
39 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "ccu_common.h"
|
|
#include "ccu_reset.h"
|
|
|
|
#include "ccu_div.h"
|
|
#include "ccu_gate.h"
|
|
#include "ccu_mp.h"
|
|
#include "ccu_mult.h"
|
|
#include "ccu_nk.h"
|
|
#include "ccu_nkm.h"
|
|
#include "ccu_nkmp.h"
|
|
#include "ccu_nm.h"
|
|
|
|
#include "ccu-sun50i-a100.h"
|
|
|
|
#define SUN50I_A100_PLL_SDM_ENABLE BIT(24)
|
|
#define SUN50I_A100_PLL_OUTPUT_ENABLE BIT(27)
|
|
#define SUN50I_A100_PLL_LOCK BIT(28)
|
|
#define SUN50I_A100_PLL_LOCK_ENABLE BIT(29)
|
|
#define SUN50I_A100_PLL_ENABLE BIT(31)
|
|
|
|
#define SUN50I_A100_PLL_PERIPH1_PATTERN0 0xd1303333
|
|
|
|
/*
|
|
* The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
|
|
* P should only be used for output frequencies lower than 288 MHz.
|
|
*
|
|
* For now we can just model it as a multiplier clock, and force P to /1.
|
|
*
|
|
* The M factor is present in the register's description, but not in the
|
|
* frequency formula, and it's documented as "M is only used for backdoor
|
|
* testing", so it's not modelled and then force to 0.
|
|
*/
|
|
#define SUN50I_A100_PLL_CPUX_REG 0x000
|
|
static struct ccu_mult pll_cpux_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.common = {
|
|
.reg = 0x000,
|
|
.hw.init = CLK_HW_INIT("pll-cpux", "dcxo24M",
|
|
&ccu_mult_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
|
|
#define SUN50I_A100_PLL_DDR0_REG 0x010
|
|
static struct ccu_nkmp pll_ddr0_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x010,
|
|
.hw.init = CLK_HW_INIT("pll-ddr0", "dcxo24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE |
|
|
CLK_IS_CRITICAL),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_A100_PLL_PERIPH0_REG 0x020
|
|
static struct ccu_nkmp pll_periph0_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.fixed_post_div = 2,
|
|
.common = {
|
|
.reg = 0x020,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-periph0", "dcxo24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_A100_PLL_PERIPH1_REG 0x028
|
|
static struct ccu_nkmp pll_periph1_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.fixed_post_div = 2,
|
|
.common = {
|
|
.reg = 0x028,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-periph1", "dcxo24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
#define SUN50I_A100_PLL_PERIPH1_PATTERN0_REG 0x128
|
|
|
|
#define SUN50I_A100_PLL_GPU_REG 0x030
|
|
static struct ccu_nkmp pll_gpu_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x030,
|
|
.hw.init = CLK_HW_INIT("pll-gpu", "dcxo24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* For Video PLLs, the output divider is described as "used for testing"
|
|
* in the user manual. So it's not modelled and forced to 0.
|
|
*/
|
|
#define SUN50I_A100_PLL_VIDEO0_REG 0x040
|
|
static struct ccu_nm pll_video0_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.fixed_post_div = 4,
|
|
.common = {
|
|
.reg = 0x040,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-video0", "dcxo24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_A100_PLL_VIDEO1_REG 0x048
|
|
static struct ccu_nm pll_video1_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.fixed_post_div = 4,
|
|
.common = {
|
|
.reg = 0x048,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-video1", "dcxo24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_A100_PLL_VIDEO2_REG 0x050
|
|
static struct ccu_nm pll_video2_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.fixed_post_div = 4,
|
|
.common = {
|
|
.reg = 0x050,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-video2", "dcxo24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_A100_PLL_VE_REG 0x058
|
|
static struct ccu_nkmp pll_ve_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x058,
|
|
.hw.init = CLK_HW_INIT("pll-ve", "dcxo24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* The COM PLL has m0 dividers in addition to the usual N, M
|
|
* factors. Since we only need 1 frequencies from this PLL: 45.1584 MHz,
|
|
* ignore it for now.
|
|
*/
|
|
#define SUN50I_A100_PLL_COM_REG 0x060
|
|
static struct ccu_sdm_setting pll_com_sdm_table[] = {
|
|
{ .rate = 451584000, .pattern = 0xc0014396, .m = 2, .n = 37 },
|
|
};
|
|
|
|
static struct ccu_nm pll_com_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(0, 1),
|
|
.sdm = _SUNXI_CCU_SDM(pll_com_sdm_table, BIT(24),
|
|
0x160, BIT(31)),
|
|
.common = {
|
|
.reg = 0x060,
|
|
.features = CCU_FEATURE_SIGMA_DELTA_MOD,
|
|
.hw.init = CLK_HW_INIT("pll-com", "dcxo24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_A100_PLL_VIDEO3_REG 0x068
|
|
static struct ccu_nm pll_video3_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.fixed_post_div = 4,
|
|
.common = {
|
|
.reg = 0x068,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-video3", "dcxo24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* The Audio PLL has m0, m1 dividers in addition to the usual N, M
|
|
* factors. Since we only need 4 frequencies from this PLL: 22.5792 MHz,
|
|
* 24.576 MHz, 90.3168MHz and 98.304MHz ignore them for now.
|
|
* Enforce the default for them, which is m0 = 1, m1 = 0.
|
|
*/
|
|
#define SUN50I_A100_PLL_AUDIO_REG 0x078
|
|
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
|
|
{ .rate = 45158400, .pattern = 0xc001bcd3, .m = 18, .n = 33 },
|
|
{ .rate = 49152000, .pattern = 0xc001eb85, .m = 20, .n = 40 },
|
|
{ .rate = 180633600, .pattern = 0xc001288d, .m = 3, .n = 22 },
|
|
{ .rate = 196608000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
|
|
};
|
|
|
|
static struct ccu_nm pll_audio_clk = {
|
|
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
|
|
.lock = SUN50I_A100_PLL_LOCK,
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(16, 6),
|
|
.fixed_post_div = 2,
|
|
.sdm = _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
|
|
0x178, BIT(31)),
|
|
.common = {
|
|
.reg = 0x078,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV |
|
|
CCU_FEATURE_SIGMA_DELTA_MOD,
|
|
.hw.init = CLK_HW_INIT("pll-audio", "dcxo24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
static const char * const cpux_parents[] = { "dcxo24M", "osc32k",
|
|
"iosc", "pll-cpux",
|
|
"pll-periph0" };
|
|
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
|
|
0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
|
|
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
|
|
static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
|
|
|
|
static const char * const psi_ahb1_ahb2_parents[] = { "dcxo24M", "osc32k",
|
|
"iosc", "pll-periph0",
|
|
"pll-periph0-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
|
|
psi_ahb1_ahb2_parents, 0x510,
|
|
0, 2, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
0);
|
|
|
|
static const char * const ahb3_apb1_apb2_parents[] = { "dcxo24M", "osc32k",
|
|
"psi-ahb1-ahb2",
|
|
"pll-periph0",
|
|
"pll-periph0-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
|
|
0, 2, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
|
|
0, 2, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
|
|
0, 2, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
0);
|
|
|
|
static const char * const mbus_parents[] = { "dcxo24M", "pll-ddr0",
|
|
"pll-periph0",
|
|
"pll-periph0-2x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
|
|
0, 3, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_IS_CRITICAL);
|
|
|
|
static const char * const de_parents[] = { "pll-com", "pll-periph0-2x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de0", de_parents, 0x600,
|
|
0, 4, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_SET_RATE_PARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
|
|
0x60c, BIT(0), 0);
|
|
|
|
static const char * const g2d_parents[] = { "pll-com", "pll-periph0-2x",
|
|
"pll-video0-2x", "pll-video1-2x",
|
|
"pll-video2-2x"};
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d",
|
|
g2d_parents,
|
|
0x630,
|
|
0, 4, /* M */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
|
|
0x63c, BIT(0), 0);
|
|
|
|
static const char * const gpu_parents[] = { "pll-gpu" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
|
|
0, 2, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
|
|
0x67c, BIT(0), 0);
|
|
|
|
static const char * const ce_parents[] = { "dcxo24M", "pll-periph0-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
|
|
0x68c, BIT(0), 0);
|
|
|
|
static const char * const ve_parents[] = { "pll-ve" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
|
|
0, 3, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_SET_RATE_PARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
|
|
0x69c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
|
|
0x70c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
|
|
0x71c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
|
|
0x72c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
|
|
0x73c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(avs_clk, "avs", "dcxo24M", 0x740, BIT(31), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
|
|
0x78c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
|
|
0x79c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
|
|
0x804, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
|
|
0x804, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
|
|
0x804, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
|
|
0x804, BIT(5), 0);
|
|
static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
|
|
0x804, BIT(8), 0);
|
|
static SUNXI_CCU_GATE(mbus_isp_clk, "mbus-isp", "mbus",
|
|
0x804, BIT(9), 0);
|
|
static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
|
|
0x804, BIT(10), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
|
|
0x80c, BIT(0), CLK_IS_CRITICAL);
|
|
|
|
static const char * const nand_spi_parents[] = { "dcxo24M",
|
|
"pll-periph0",
|
|
"pll-periph1",
|
|
"pll-periph0-2x",
|
|
"pll-periph1-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
|
|
|
|
static const char * const mmc_parents[] = { "dcxo24M", "pll-periph0-2x",
|
|
"pll-periph1-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
2, /* post-div */
|
|
CLK_SET_RATE_NO_REPARENT);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
2, /* post-div */
|
|
CLK_SET_RATE_NO_REPARENT);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
2, /* post-div */
|
|
CLK_SET_RATE_NO_REPARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
|
|
static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", nand_spi_parents, 0x948,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb3", 0x96c, BIT(2), 0);
|
|
|
|
static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
|
|
BIT(31) | BIT(30), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
|
|
|
|
static const char * const ir_parents[] = { "osc32k", "iosc",
|
|
"pll-periph0", "pll-periph1" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_rx_clk, "ir-rx", ir_parents, 0x990,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ir_rx_clk, "bus-ir-rx", "ahb3", 0x99c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_parents, 0x9c0,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb1", 0x9ec, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
|
|
|
|
static const char * const audio_parents[] = { "pll-audio", "pll-com-audio" };
|
|
static struct ccu_div i2s0_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa10,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s0",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static struct ccu_div i2s1_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa14,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s1",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static struct ccu_div i2s2_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa18,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s2",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static struct ccu_div i2s3_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa1c,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s3",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa20, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa20, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa20, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa20, BIT(3), 0);
|
|
|
|
static struct ccu_div spdif_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa24,
|
|
.hw.init = CLK_HW_INIT_PARENTS("spdif",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
|
|
|
|
static struct ccu_div dmic_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa40,
|
|
.hw.init = CLK_HW_INIT_PARENTS("dmic",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac",
|
|
audio_parents, 0xa50,
|
|
0, 4, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc",
|
|
audio_parents, 0xa54,
|
|
0, 4, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
|
|
audio_parents, 0xa58,
|
|
0, 4, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
|
|
BIT(0), 0);
|
|
|
|
/*
|
|
* There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
|
|
* We will force them to 0 (12M divided from 48M).
|
|
*/
|
|
#define SUN50I_A100_USB0_CLK_REG 0xa70
|
|
#define SUN50I_A100_USB1_CLK_REG 0xa74
|
|
|
|
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
|
|
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "dcxo24M", 0xa70, BIT(29), 0);
|
|
|
|
static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
|
|
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "dcxo24M", 0xa74, BIT(29), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
|
|
static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
|
|
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "ahb3", 0xa9c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dpss_top0_clk, "bus-dpss-top0", "ahb3",
|
|
0xabc, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dpss_top1_clk, "bus-dpss-top1", "ahb3",
|
|
0xacc, BIT(0), 0);
|
|
|
|
static const char * const mipi_dsi_parents[] = { "dcxo24M", "pll-periph0-2x",
|
|
"pll-periph0" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi",
|
|
mipi_dsi_parents,
|
|
0xb24,
|
|
0, 4, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb3",
|
|
0xb4c, BIT(0), 0);
|
|
|
|
static const char * const tcon_lcd_parents[] = { "pll-video0-4x",
|
|
"pll-video1-4x",
|
|
"pll-video2-4x",
|
|
"pll-video3-4x",
|
|
"pll-periph0-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd0",
|
|
tcon_lcd_parents, 0xb60,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_tcon_lcd_clk, "bus-tcon-lcd0", "ahb3",
|
|
0xb7c, BIT(0), 0);
|
|
|
|
static const char * const ledc_parents[] = { "dcxo24M",
|
|
"pll-periph0" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ledc_clk, "ledc",
|
|
ledc_parents, 0xbf0,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ledc_clk, "bus-ledc", "ahb3", 0xbfc, BIT(0), 0);
|
|
|
|
static const char * const csi_top_parents[] = { "pll-periph0-2x",
|
|
"pll-video0-2x",
|
|
"pll-video1-2x",
|
|
"pll-video2-2x",
|
|
"pll-video3-2x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(csi_top_clk, "csi-top",
|
|
csi_top_parents, 0xc04,
|
|
0, 4, /* M */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static const char * const csi0_mclk_parents[] = { "dcxo24M", "pll-video2",
|
|
"pll-video3", "pll-video0",
|
|
"pll-video1" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk",
|
|
csi0_mclk_parents, 0xc08,
|
|
0, 5, /* M */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static const char * const csi1_mclk_parents[] = { "dcxo24M", "pll-video3",
|
|
"pll-video0", "pll-video1",
|
|
"pll-video2" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk",
|
|
csi1_mclk_parents, 0xc0c,
|
|
0, 5, /* M */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc1c, BIT(0), 0);
|
|
|
|
static const char * const csi_isp_parents[] = { "pll-periph0-2x",
|
|
"pll-video0-2x",
|
|
"pll-video1-2x",
|
|
"pll-video2-2x",
|
|
"pll-video3-2x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp",
|
|
csi_isp_parents, 0xc20,
|
|
0, 5, /* M */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
/* Fixed factor clocks */
|
|
static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
|
|
|
|
static CLK_FIXED_FACTOR_HW(pll_com_audio_clk, "pll-com-audio",
|
|
&pll_com_clk.common.hw,
|
|
5, 1, CLK_SET_RATE_PARENT);
|
|
|
|
static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
|
|
&pll_periph0_clk.common.hw,
|
|
1, 2, 0);
|
|
|
|
static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
|
|
&pll_periph1_clk.common.hw,
|
|
1, 2, 0);
|
|
|
|
static const struct clk_hw *pll_video0_parents[] = {
|
|
&pll_video0_clk.common.hw
|
|
};
|
|
static CLK_FIXED_FACTOR_HWS(pll_video0_4x_clk, "pll-video0-4x",
|
|
pll_video0_parents,
|
|
1, 4, CLK_SET_RATE_PARENT);
|
|
static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x",
|
|
pll_video0_parents,
|
|
1, 2, CLK_SET_RATE_PARENT);
|
|
|
|
static const struct clk_hw *pll_video1_parents[] = {
|
|
&pll_video1_clk.common.hw
|
|
};
|
|
static CLK_FIXED_FACTOR_HWS(pll_video1_4x_clk, "pll-video1-4x",
|
|
pll_video1_parents,
|
|
1, 4, CLK_SET_RATE_PARENT);
|
|
static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x",
|
|
pll_video1_parents,
|
|
1, 2, CLK_SET_RATE_PARENT);
|
|
|
|
static const struct clk_hw *pll_video2_parents[] = {
|
|
&pll_video2_clk.common.hw
|
|
};
|
|
static CLK_FIXED_FACTOR_HWS(pll_video2_4x_clk, "pll-video2-4x",
|
|
pll_video2_parents,
|
|
1, 4, CLK_SET_RATE_PARENT);
|
|
static CLK_FIXED_FACTOR_HWS(pll_video2_2x_clk, "pll-video2-2x",
|
|
pll_video2_parents,
|
|
1, 2, CLK_SET_RATE_PARENT);
|
|
|
|
static const struct clk_hw *pll_video3_parents[] = {
|
|
&pll_video3_clk.common.hw
|
|
};
|
|
static CLK_FIXED_FACTOR_HWS(pll_video3_4x_clk, "pll-video3-4x",
|
|
pll_video3_parents,
|
|
1, 4, CLK_SET_RATE_PARENT);
|
|
static CLK_FIXED_FACTOR_HWS(pll_video3_2x_clk, "pll-video3-2x",
|
|
pll_video3_parents,
|
|
1, 2, CLK_SET_RATE_PARENT);
|
|
|
|
static struct ccu_common *sun50i_a100_ccu_clks[] = {
|
|
&pll_cpux_clk.common,
|
|
&pll_ddr0_clk.common,
|
|
&pll_periph0_clk.common,
|
|
&pll_periph1_clk.common,
|
|
&pll_gpu_clk.common,
|
|
&pll_video0_clk.common,
|
|
&pll_video1_clk.common,
|
|
&pll_video2_clk.common,
|
|
&pll_video3_clk.common,
|
|
&pll_ve_clk.common,
|
|
&pll_com_clk.common,
|
|
&pll_audio_clk.common,
|
|
&cpux_clk.common,
|
|
&axi_clk.common,
|
|
&cpux_apb_clk.common,
|
|
&psi_ahb1_ahb2_clk.common,
|
|
&ahb3_clk.common,
|
|
&apb1_clk.common,
|
|
&apb2_clk.common,
|
|
&mbus_clk.common,
|
|
&de_clk.common,
|
|
&bus_de_clk.common,
|
|
&g2d_clk.common,
|
|
&bus_g2d_clk.common,
|
|
&gpu_clk.common,
|
|
&bus_gpu_clk.common,
|
|
&ce_clk.common,
|
|
&bus_ce_clk.common,
|
|
&ve_clk.common,
|
|
&bus_ve_clk.common,
|
|
&bus_dma_clk.common,
|
|
&bus_msgbox_clk.common,
|
|
&bus_spinlock_clk.common,
|
|
&bus_hstimer_clk.common,
|
|
&avs_clk.common,
|
|
&bus_dbg_clk.common,
|
|
&bus_psi_clk.common,
|
|
&bus_pwm_clk.common,
|
|
&bus_iommu_clk.common,
|
|
&mbus_dma_clk.common,
|
|
&mbus_ve_clk.common,
|
|
&mbus_ce_clk.common,
|
|
&mbus_nand_clk.common,
|
|
&mbus_csi_clk.common,
|
|
&mbus_isp_clk.common,
|
|
&mbus_g2d_clk.common,
|
|
&bus_dram_clk.common,
|
|
&nand0_clk.common,
|
|
&nand1_clk.common,
|
|
&bus_nand_clk.common,
|
|
&mmc0_clk.common,
|
|
&mmc1_clk.common,
|
|
&mmc2_clk.common,
|
|
&bus_mmc0_clk.common,
|
|
&bus_mmc1_clk.common,
|
|
&bus_mmc2_clk.common,
|
|
&bus_uart0_clk.common,
|
|
&bus_uart1_clk.common,
|
|
&bus_uart2_clk.common,
|
|
&bus_uart3_clk.common,
|
|
&bus_uart4_clk.common,
|
|
&bus_i2c0_clk.common,
|
|
&bus_i2c1_clk.common,
|
|
&bus_i2c2_clk.common,
|
|
&bus_i2c3_clk.common,
|
|
&spi0_clk.common,
|
|
&spi1_clk.common,
|
|
&spi2_clk.common,
|
|
&bus_spi0_clk.common,
|
|
&bus_spi1_clk.common,
|
|
&bus_spi2_clk.common,
|
|
&emac_25m_clk.common,
|
|
&bus_emac_clk.common,
|
|
&ir_rx_clk.common,
|
|
&bus_ir_rx_clk.common,
|
|
&ir_tx_clk.common,
|
|
&bus_ir_tx_clk.common,
|
|
&bus_gpadc_clk.common,
|
|
&bus_ths_clk.common,
|
|
&i2s0_clk.common,
|
|
&i2s1_clk.common,
|
|
&i2s2_clk.common,
|
|
&i2s3_clk.common,
|
|
&bus_i2s0_clk.common,
|
|
&bus_i2s1_clk.common,
|
|
&bus_i2s2_clk.common,
|
|
&bus_i2s3_clk.common,
|
|
&spdif_clk.common,
|
|
&bus_spdif_clk.common,
|
|
&dmic_clk.common,
|
|
&bus_dmic_clk.common,
|
|
&audio_codec_dac_clk.common,
|
|
&audio_codec_adc_clk.common,
|
|
&audio_codec_4x_clk.common,
|
|
&bus_audio_codec_clk.common,
|
|
&usb_ohci0_clk.common,
|
|
&usb_phy0_clk.common,
|
|
&usb_ohci1_clk.common,
|
|
&usb_phy1_clk.common,
|
|
&bus_ohci0_clk.common,
|
|
&bus_ohci1_clk.common,
|
|
&bus_ehci0_clk.common,
|
|
&bus_ehci1_clk.common,
|
|
&bus_otg_clk.common,
|
|
&bus_lradc_clk.common,
|
|
&bus_dpss_top0_clk.common,
|
|
&bus_dpss_top1_clk.common,
|
|
&mipi_dsi_clk.common,
|
|
&bus_mipi_dsi_clk.common,
|
|
&tcon_lcd_clk.common,
|
|
&bus_tcon_lcd_clk.common,
|
|
&ledc_clk.common,
|
|
&bus_ledc_clk.common,
|
|
&csi_top_clk.common,
|
|
&csi0_mclk_clk.common,
|
|
&csi1_mclk_clk.common,
|
|
&bus_csi_clk.common,
|
|
&csi_isp_clk.common,
|
|
};
|
|
|
|
static struct clk_hw_onecell_data sun50i_a100_hw_clks = {
|
|
.hws = {
|
|
[CLK_OSC12M] = &osc12M_clk.hw,
|
|
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
|
|
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
|
|
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
|
|
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
|
|
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
|
|
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
|
|
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
|
|
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
|
|
[CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
|
|
[CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
|
|
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
|
|
[CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
|
|
[CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
|
|
[CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw,
|
|
[CLK_PLL_VIDEO2_2X] = &pll_video2_2x_clk.hw,
|
|
[CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw,
|
|
[CLK_PLL_VIDEO3] = &pll_video3_clk.common.hw,
|
|
[CLK_PLL_VIDEO3_2X] = &pll_video3_2x_clk.hw,
|
|
[CLK_PLL_VIDEO3_4X] = &pll_video3_4x_clk.hw,
|
|
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
|
|
[CLK_PLL_COM] = &pll_com_clk.common.hw,
|
|
[CLK_PLL_COM_AUDIO] = &pll_com_audio_clk.hw,
|
|
[CLK_PLL_AUDIO] = &pll_audio_clk.common.hw,
|
|
[CLK_CPUX] = &cpux_clk.common.hw,
|
|
[CLK_AXI] = &axi_clk.common.hw,
|
|
[CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
|
|
[CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
|
|
[CLK_AHB3] = &ahb3_clk.common.hw,
|
|
[CLK_APB1] = &apb1_clk.common.hw,
|
|
[CLK_APB2] = &apb2_clk.common.hw,
|
|
[CLK_MBUS] = &mbus_clk.common.hw,
|
|
[CLK_DE] = &de_clk.common.hw,
|
|
[CLK_BUS_DE] = &bus_de_clk.common.hw,
|
|
[CLK_G2D] = &g2d_clk.common.hw,
|
|
[CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
|
|
[CLK_GPU] = &gpu_clk.common.hw,
|
|
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
|
|
[CLK_CE] = &ce_clk.common.hw,
|
|
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
|
|
[CLK_VE] = &ve_clk.common.hw,
|
|
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
|
|
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
|
|
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
|
|
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
|
|
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
|
|
[CLK_AVS] = &avs_clk.common.hw,
|
|
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
|
|
[CLK_BUS_PSI] = &bus_psi_clk.common.hw,
|
|
[CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
|
|
[CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
|
|
[CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
|
|
[CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
|
|
[CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
|
|
[CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
|
|
[CLK_MBUS_CSI] = &mbus_csi_clk.common.hw,
|
|
[CLK_MBUS_ISP] = &mbus_isp_clk.common.hw,
|
|
[CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
|
|
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
|
|
[CLK_NAND0] = &nand0_clk.common.hw,
|
|
[CLK_NAND1] = &nand1_clk.common.hw,
|
|
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
|
|
[CLK_MMC0] = &mmc0_clk.common.hw,
|
|
[CLK_MMC1] = &mmc1_clk.common.hw,
|
|
[CLK_MMC2] = &mmc2_clk.common.hw,
|
|
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
|
|
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
|
|
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
|
|
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
|
|
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
|
|
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
|
|
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
|
|
[CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
|
|
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
|
|
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
|
|
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
|
|
[CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
|
|
[CLK_SPI0] = &spi0_clk.common.hw,
|
|
[CLK_SPI1] = &spi1_clk.common.hw,
|
|
[CLK_SPI2] = &spi2_clk.common.hw,
|
|
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
|
|
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
|
|
[CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
|
|
[CLK_EMAC_25M] = &emac_25m_clk.common.hw,
|
|
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
|
|
[CLK_IR_RX] = &ir_rx_clk.common.hw,
|
|
[CLK_BUS_IR_RX] = &bus_ir_rx_clk.common.hw,
|
|
[CLK_IR_TX] = &ir_tx_clk.common.hw,
|
|
[CLK_BUS_IR_TX] = &bus_ir_tx_clk.common.hw,
|
|
[CLK_BUS_GPADC] = &bus_gpadc_clk.common.hw,
|
|
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
|
|
[CLK_I2S0] = &i2s0_clk.common.hw,
|
|
[CLK_I2S1] = &i2s1_clk.common.hw,
|
|
[CLK_I2S2] = &i2s2_clk.common.hw,
|
|
[CLK_I2S3] = &i2s3_clk.common.hw,
|
|
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
|
|
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
|
|
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
|
|
[CLK_BUS_I2S3] = &bus_i2s3_clk.common.hw,
|
|
[CLK_SPDIF] = &spdif_clk.common.hw,
|
|
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
|
|
[CLK_DMIC] = &dmic_clk.common.hw,
|
|
[CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
|
|
[CLK_AUDIO_DAC] = &audio_codec_dac_clk.common.hw,
|
|
[CLK_AUDIO_ADC] = &audio_codec_adc_clk.common.hw,
|
|
[CLK_AUDIO_4X] = &audio_codec_4x_clk.common.hw,
|
|
[CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw,
|
|
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
|
|
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
|
|
[CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
|
|
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
|
|
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
|
|
[CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
|
|
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
|
|
[CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
|
|
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
|
|
[CLK_BUS_LRADC] = &bus_lradc_clk.common.hw,
|
|
[CLK_BUS_DPSS_TOP0] = &bus_dpss_top0_clk.common.hw,
|
|
[CLK_BUS_DPSS_TOP1] = &bus_dpss_top1_clk.common.hw,
|
|
[CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw,
|
|
[CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
|
|
[CLK_TCON_LCD] = &tcon_lcd_clk.common.hw,
|
|
[CLK_BUS_TCON_LCD] = &bus_tcon_lcd_clk.common.hw,
|
|
[CLK_LEDC] = &ledc_clk.common.hw,
|
|
[CLK_BUS_LEDC] = &bus_ledc_clk.common.hw,
|
|
[CLK_CSI_TOP] = &csi_top_clk.common.hw,
|
|
[CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
|
|
[CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
|
|
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
|
|
[CLK_CSI_ISP] = &csi_isp_clk.common.hw,
|
|
},
|
|
.num = CLK_NUMBER,
|
|
};
|
|
|
|
static struct ccu_reset_map sun50i_a100_ccu_resets[] = {
|
|
[RST_MBUS] = { 0x540, BIT(30) },
|
|
|
|
[RST_BUS_DE] = { 0x60c, BIT(16) },
|
|
[RST_BUS_G2D] = { 0x63c, BIT(16) },
|
|
[RST_BUS_GPU] = { 0x67c, BIT(16) },
|
|
[RST_BUS_CE] = { 0x68c, BIT(16) },
|
|
[RST_BUS_VE] = { 0x69c, BIT(16) },
|
|
[RST_BUS_DMA] = { 0x70c, BIT(16) },
|
|
[RST_BUS_MSGBOX] = { 0x71c, BIT(16) },
|
|
[RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
|
|
[RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
|
|
[RST_BUS_DBG] = { 0x78c, BIT(16) },
|
|
[RST_BUS_PSI] = { 0x79c, BIT(16) },
|
|
[RST_BUS_PWM] = { 0x7ac, BIT(16) },
|
|
[RST_BUS_DRAM] = { 0x80c, BIT(16) },
|
|
[RST_BUS_NAND] = { 0x82c, BIT(16) },
|
|
[RST_BUS_MMC0] = { 0x84c, BIT(16) },
|
|
[RST_BUS_MMC1] = { 0x84c, BIT(17) },
|
|
[RST_BUS_MMC2] = { 0x84c, BIT(18) },
|
|
[RST_BUS_UART0] = { 0x90c, BIT(16) },
|
|
[RST_BUS_UART1] = { 0x90c, BIT(17) },
|
|
[RST_BUS_UART2] = { 0x90c, BIT(18) },
|
|
[RST_BUS_UART3] = { 0x90c, BIT(19) },
|
|
[RST_BUS_UART4] = { 0x90c, BIT(20) },
|
|
[RST_BUS_I2C0] = { 0x91c, BIT(16) },
|
|
[RST_BUS_I2C1] = { 0x91c, BIT(17) },
|
|
[RST_BUS_I2C2] = { 0x91c, BIT(18) },
|
|
[RST_BUS_I2C3] = { 0x91c, BIT(19) },
|
|
[RST_BUS_SPI0] = { 0x96c, BIT(16) },
|
|
[RST_BUS_SPI1] = { 0x96c, BIT(17) },
|
|
[RST_BUS_SPI2] = { 0x96c, BIT(18) },
|
|
[RST_BUS_EMAC] = { 0x97c, BIT(16) },
|
|
[RST_BUS_IR_RX] = { 0x99c, BIT(16) },
|
|
[RST_BUS_IR_TX] = { 0x9cc, BIT(16) },
|
|
[RST_BUS_GPADC] = { 0x9ec, BIT(16) },
|
|
[RST_BUS_THS] = { 0x9fc, BIT(16) },
|
|
[RST_BUS_I2S0] = { 0xa20, BIT(16) },
|
|
[RST_BUS_I2S1] = { 0xa20, BIT(17) },
|
|
[RST_BUS_I2S2] = { 0xa20, BIT(18) },
|
|
[RST_BUS_I2S3] = { 0xa20, BIT(19) },
|
|
[RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
|
|
[RST_BUS_DMIC] = { 0xa4c, BIT(16) },
|
|
[RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
|
|
|
|
[RST_USB_PHY0] = { 0xa70, BIT(30) },
|
|
[RST_USB_PHY1] = { 0xa74, BIT(30) },
|
|
|
|
[RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
|
|
[RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
|
|
[RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
|
|
[RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
|
|
[RST_BUS_OTG] = { 0xa8c, BIT(24) },
|
|
|
|
[RST_BUS_LRADC] = { 0xa9c, BIT(16) },
|
|
[RST_BUS_DPSS_TOP0] = { 0xabc, BIT(16) },
|
|
[RST_BUS_DPSS_TOP1] = { 0xacc, BIT(16) },
|
|
[RST_BUS_MIPI_DSI] = { 0xb4c, BIT(16) },
|
|
[RST_BUS_TCON_LCD] = { 0xb7c, BIT(16) },
|
|
[RST_BUS_LVDS] = { 0xbac, BIT(16) },
|
|
[RST_BUS_LEDC] = { 0xbfc, BIT(16) },
|
|
[RST_BUS_CSI] = { 0xc1c, BIT(16) },
|
|
[RST_BUS_CSI_ISP] = { 0xc2c, BIT(16) },
|
|
};
|
|
|
|
static const struct sunxi_ccu_desc sun50i_a100_ccu_desc = {
|
|
.ccu_clks = sun50i_a100_ccu_clks,
|
|
.num_ccu_clks = ARRAY_SIZE(sun50i_a100_ccu_clks),
|
|
|
|
.hw_clks = &sun50i_a100_hw_clks,
|
|
|
|
.resets = sun50i_a100_ccu_resets,
|
|
.num_resets = ARRAY_SIZE(sun50i_a100_ccu_resets),
|
|
};
|
|
|
|
static const u32 sun50i_a100_pll_regs[] = {
|
|
SUN50I_A100_PLL_CPUX_REG,
|
|
SUN50I_A100_PLL_DDR0_REG,
|
|
SUN50I_A100_PLL_PERIPH0_REG,
|
|
SUN50I_A100_PLL_PERIPH1_REG,
|
|
SUN50I_A100_PLL_GPU_REG,
|
|
SUN50I_A100_PLL_VIDEO0_REG,
|
|
SUN50I_A100_PLL_VIDEO1_REG,
|
|
SUN50I_A100_PLL_VIDEO2_REG,
|
|
SUN50I_A100_PLL_VIDEO3_REG,
|
|
SUN50I_A100_PLL_VE_REG,
|
|
SUN50I_A100_PLL_COM_REG,
|
|
SUN50I_A100_PLL_AUDIO_REG,
|
|
};
|
|
|
|
static const u32 sun50i_a100_pll_video_regs[] = {
|
|
SUN50I_A100_PLL_VIDEO0_REG,
|
|
SUN50I_A100_PLL_VIDEO1_REG,
|
|
SUN50I_A100_PLL_VIDEO2_REG,
|
|
SUN50I_A100_PLL_VIDEO3_REG,
|
|
};
|
|
|
|
static const u32 sun50i_a100_usb2_clk_regs[] = {
|
|
SUN50I_A100_USB0_CLK_REG,
|
|
SUN50I_A100_USB1_CLK_REG,
|
|
};
|
|
|
|
static struct ccu_pll_nb sun50i_a100_pll_cpu_nb = {
|
|
.common = &pll_cpux_clk.common,
|
|
/* copy from pll_cpux_clk */
|
|
.enable = BIT(27),
|
|
.lock = BIT(28),
|
|
};
|
|
|
|
static struct ccu_mux_nb sun50i_a100_cpu_nb = {
|
|
.common = &cpux_clk.common,
|
|
.cm = &cpux_clk.mux,
|
|
.delay_us = 1,
|
|
.bypass_index = 4, /* index of pll periph0 */
|
|
};
|
|
|
|
static int sun50i_a100_ccu_probe(struct platform_device *pdev)
|
|
{
|
|
void __iomem *reg;
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
reg = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
/*
|
|
* Enable lock and enable bits on all PLLs.
|
|
*
|
|
* Due to the current design, multiple PLLs share one power switch,
|
|
* so switching PLL is easy to cause stability problems.
|
|
* When initializing, we enable them by default. When disable,
|
|
* we only turn off the output of PLL.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_regs); i++) {
|
|
val = readl(reg + sun50i_a100_pll_regs[i]);
|
|
val |= SUN50I_A100_PLL_LOCK_ENABLE | SUN50I_A100_PLL_ENABLE;
|
|
writel(val, reg + sun50i_a100_pll_regs[i]);
|
|
}
|
|
|
|
/*
|
|
* In order to pass the EMI certification, the SDM function of
|
|
* the peripheral 1 bus is enabled, and the frequency is still
|
|
* calculated using the previous division factor.
|
|
*/
|
|
writel(SUN50I_A100_PLL_PERIPH1_PATTERN0,
|
|
reg + SUN50I_A100_PLL_PERIPH1_PATTERN0_REG);
|
|
|
|
val = readl(reg + SUN50I_A100_PLL_PERIPH1_REG);
|
|
val |= SUN50I_A100_PLL_SDM_ENABLE;
|
|
writel(val, reg + SUN50I_A100_PLL_PERIPH1_REG);
|
|
|
|
/*
|
|
* Force the output divider of video PLLs to 0.
|
|
*
|
|
* See the comment before pll-video0 definition for the reason.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_video_regs); i++) {
|
|
val = readl(reg + sun50i_a100_pll_video_regs[i]);
|
|
val &= ~BIT(0);
|
|
writel(val, reg + sun50i_a100_pll_video_regs[i]);
|
|
}
|
|
|
|
/*
|
|
* Enforce m1 = 0, m0 = 1 for Audio PLL
|
|
*
|
|
* See the comment before pll-audio definition for the reason.
|
|
*/
|
|
val = readl(reg + SUN50I_A100_PLL_AUDIO_REG);
|
|
val &= ~BIT(1);
|
|
val |= BIT(0);
|
|
writel(val, reg + SUN50I_A100_PLL_AUDIO_REG);
|
|
|
|
/*
|
|
* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
|
|
*
|
|
* This clock mux is still mysterious, and the code just enforces
|
|
* it to have a valid clock parent.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(sun50i_a100_usb2_clk_regs); i++) {
|
|
val = readl(reg + sun50i_a100_usb2_clk_regs[i]);
|
|
val &= ~GENMASK(25, 24);
|
|
writel(val, reg + sun50i_a100_usb2_clk_regs[i]);
|
|
}
|
|
|
|
ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_a100_ccu_desc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Gate then ungate PLL CPU after any rate changes */
|
|
ccu_pll_notifier_register(&sun50i_a100_pll_cpu_nb);
|
|
|
|
/* Reparent CPU during PLL CPU rate changes */
|
|
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
|
|
&sun50i_a100_cpu_nb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sun50i_a100_ccu_ids[] = {
|
|
{ .compatible = "allwinner,sun50i-a100-ccu" },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver sun50i_a100_ccu_driver = {
|
|
.probe = sun50i_a100_ccu_probe,
|
|
.driver = {
|
|
.name = "sun50i-a100-ccu",
|
|
.suppress_bind_attrs = true,
|
|
.of_match_table = sun50i_a100_ccu_ids,
|
|
},
|
|
};
|
|
module_platform_driver(sun50i_a100_ccu_driver);
|
|
|
|
MODULE_IMPORT_NS(SUNXI_CCU);
|
|
MODULE_LICENSE("GPL");
|