linux/arch/arc/mm/cache.c
Alexey Brodkin f2b0b25a37 ARCv2: Support IO Coherency and permutations involving L1 and L2 caches
In case of ARCv2 CPU there're could be following configurations
that affect cache handling for data exchanged with peripherals
via DMA:
 [1] Only L1 cache exists
 [2] Both L1 and L2 exist, but no IO coherency unit
 [3] L1, L2 caches and IO coherency unit exist

Current implementation takes care of [1] and [2].
Moreover support of [2] is implemented with run-time check
for SLC existence which is not super optimal.

This patch introduces support of [3] and rework of DMA ops
usage. Instead of doing run-time check every time a particular
DMA op is executed we'll have 3 different implementations of
DMA ops and select appropriate one during init.

As for IOC support for it we need:
 [a] Implement empty DMA ops because IOC takes care of cache
     coherency with DMAed data
 [b] Route dma_alloc_coherent() via dma_alloc_noncoherent()
     This is required to make IOC work in first place and also
     serves as optimization as LD/ST to coherent buffers can be
     srviced from caches w/o going all the way to memory

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta:
  -Added some comments about IOC gains
  -Marked dma ops as static,
  -Massaged changelog a bit]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-20 18:11:17 +05:30

934 lines
26 KiB
C

/*
* ARC Cache Management
*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/cache.h>
#include <linux/mmu_context.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
#include <asm/cachectl.h>
#include <asm/setup.h>
static int l2_line_sz;
int ioc_exists;
void (*_cache_line_loop_ic_fn)(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int cacheop);
void (*__dma_cache_wback_inv)(unsigned long start, unsigned long sz);
void (*__dma_cache_inv)(unsigned long start, unsigned long sz);
void (*__dma_cache_wback)(unsigned long start, unsigned long sz);
char *arc_cache_mumbojumbo(int c, char *buf, int len)
{
int n = 0;
struct cpuinfo_arc_cache *p;
#define PR_CACHE(p, cfg, str) \
if (!(p)->ver) \
n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \
else \
n += scnprintf(buf + n, len - n, \
str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n", \
(p)->sz_k, (p)->assoc, (p)->line_len, \
(p)->vipt ? "VIPT" : "PIPT", \
(p)->alias ? " aliasing" : "", \
IS_ENABLED(cfg) ? "" : " (not used)");
PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
p = &cpuinfo_arc700[c].slc;
if (p->ver)
n += scnprintf(buf + n, len - n,
"SLC\t\t: %uK, %uB Line\n", p->sz_k, p->line_len);
if (ioc_exists)
n += scnprintf(buf + n, len - n, "IOC\t\t: exists\n");
return buf;
}
/*
* Read the Cache Build Confuration Registers, Decode them and save into
* the cpuinfo structure for later use.
* No Validation done here, simply read/convert the BCRs
*/
void read_decode_cache_bcr(void)
{
struct cpuinfo_arc_cache *p_ic, *p_dc, *p_slc;
unsigned int cpu = smp_processor_id();
struct bcr_cache {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
#else
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
#endif
} ibcr, dbcr;
struct bcr_generic sbcr;
struct bcr_slc_cfg {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:24, way:2, lsz:2, sz:4;
#else
unsigned int sz:4, lsz:2, way:2, pad:24;
#endif
} slc_cfg;
struct bcr_clust_cfg {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
#else
unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
#endif
} cbcr;
p_ic = &cpuinfo_arc700[cpu].icache;
READ_BCR(ARC_REG_IC_BCR, ibcr);
if (!ibcr.ver)
goto dc_chk;
if (ibcr.ver <= 3) {
BUG_ON(ibcr.config != 3);
p_ic->assoc = 2; /* Fixed to 2w set assoc */
} else if (ibcr.ver >= 4) {
p_ic->assoc = 1 << ibcr.config; /* 1,2,4,8 */
}
p_ic->line_len = 8 << ibcr.line_len;
p_ic->sz_k = 1 << (ibcr.sz - 1);
p_ic->ver = ibcr.ver;
p_ic->vipt = 1;
p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
dc_chk:
p_dc = &cpuinfo_arc700[cpu].dcache;
READ_BCR(ARC_REG_DC_BCR, dbcr);
if (!dbcr.ver)
goto slc_chk;
if (dbcr.ver <= 3) {
BUG_ON(dbcr.config != 2);
p_dc->assoc = 4; /* Fixed to 4w set assoc */
p_dc->vipt = 1;
p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
} else if (dbcr.ver >= 4) {
p_dc->assoc = 1 << dbcr.config; /* 1,2,4,8 */
p_dc->vipt = 0;
p_dc->alias = 0; /* PIPT so can't VIPT alias */
}
p_dc->line_len = 16 << dbcr.line_len;
p_dc->sz_k = 1 << (dbcr.sz - 1);
p_dc->ver = dbcr.ver;
slc_chk:
if (!is_isa_arcv2())
return;
p_slc = &cpuinfo_arc700[cpu].slc;
READ_BCR(ARC_REG_SLC_BCR, sbcr);
if (sbcr.ver) {
READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
p_slc->ver = sbcr.ver;
p_slc->sz_k = 128 << slc_cfg.sz;
l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
}
READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
if (cbcr.c)
ioc_exists = 1;
}
/*
* Line Operation on {I,D}-Cache
*/
#define OP_INV 0x1
#define OP_FLUSH 0x2
#define OP_FLUSH_N_INV 0x3
#define OP_INV_IC 0x4
/*
* I-Cache Aliasing in ARC700 VIPT caches (MMU v1-v3)
*
* ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
* The orig Cache Management Module "CDU" only required paddr to invalidate a
* certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
* Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
* the exact same line.
*
* However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
* paddr alone could not be used to correctly index the cache.
*
* ------------------
* MMU v1/v2 (Fixed Page Size 8k)
* ------------------
* The solution was to provide CDU with these additonal vaddr bits. These
* would be bits [x:13], x would depend on cache-geometry, 13 comes from
* standard page size of 8k.
* H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
* of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
* orig 5 bits of paddr were anyways ignored by CDU line ops, as they
* represent the offset within cache-line. The adv of using this "clumsy"
* interface for additional info was no new reg was needed in CDU programming
* model.
*
* 17:13 represented the max num of bits passable, actual bits needed were
* fewer, based on the num-of-aliases possible.
* -for 2 alias possibility, only bit 13 needed (32K cache)
* -for 4 alias possibility, bits 14:13 needed (64K cache)
*
* ------------------
* MMU v3
* ------------------
* This ver of MMU supports variable page sizes (1k-16k): although Linux will
* only support 8k (default), 16k and 4k.
* However from hardware perspective, smaller page sizes aggrevate aliasing
* meaning more vaddr bits needed to disambiguate the cache-line-op ;
* the existing scheme of piggybacking won't work for certain configurations.
* Two new registers IC_PTAG and DC_PTAG inttoduced.
* "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
*/
static inline
void __cache_line_loop_v2(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
unsigned int aux_cmd;
int num_lines;
const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
if (op == OP_INV_IC) {
aux_cmd = ARC_REG_IC_IVIL;
} else {
/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
}
/* Ensure we properly floor/ceil the non-line aligned/sized requests
* and have @paddr - aligned to cache line and integral @num_lines.
* This however can be avoided for page sized since:
* -@paddr will be cache-line aligned already (being page aligned)
* -@sz will be integral multiple of line size (being page sized).
*/
if (!full_page) {
sz += paddr & ~CACHE_LINE_MASK;
paddr &= CACHE_LINE_MASK;
vaddr &= CACHE_LINE_MASK;
}
num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
/* MMUv2 and before: paddr contains stuffed vaddrs bits */
paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
while (num_lines-- > 0) {
write_aux_reg(aux_cmd, paddr);
paddr += L1_CACHE_BYTES;
}
}
static inline
void __cache_line_loop_v3(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
unsigned int aux_cmd, aux_tag;
int num_lines;
const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
if (op == OP_INV_IC) {
aux_cmd = ARC_REG_IC_IVIL;
aux_tag = ARC_REG_IC_PTAG;
} else {
aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
aux_tag = ARC_REG_DC_PTAG;
}
/* Ensure we properly floor/ceil the non-line aligned/sized requests
* and have @paddr - aligned to cache line and integral @num_lines.
* This however can be avoided for page sized since:
* -@paddr will be cache-line aligned already (being page aligned)
* -@sz will be integral multiple of line size (being page sized).
*/
if (!full_page) {
sz += paddr & ~CACHE_LINE_MASK;
paddr &= CACHE_LINE_MASK;
vaddr &= CACHE_LINE_MASK;
}
num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
/*
* MMUv3, cache ops require paddr in PTAG reg
* if V-P const for loop, PTAG can be written once outside loop
*/
if (full_page)
write_aux_reg(aux_tag, paddr);
while (num_lines-- > 0) {
if (!full_page) {
write_aux_reg(aux_tag, paddr);
paddr += L1_CACHE_BYTES;
}
write_aux_reg(aux_cmd, vaddr);
vaddr += L1_CACHE_BYTES;
}
}
/*
* In HS38x (MMU v4), although icache is VIPT, only paddr is needed for cache
* maintenance ops (in IVIL reg), as long as icache doesn't alias.
*
* For Aliasing icache, vaddr is also needed (in IVIL), while paddr is
* specified in PTAG (similar to MMU v3)
*/
static inline
void __cache_line_loop_v4(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int cacheop)
{
unsigned int aux_cmd;
int num_lines;
const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE;
if (cacheop == OP_INV_IC) {
aux_cmd = ARC_REG_IC_IVIL;
} else {
/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
}
/* Ensure we properly floor/ceil the non-line aligned/sized requests
* and have @paddr - aligned to cache line and integral @num_lines.
* This however can be avoided for page sized since:
* -@paddr will be cache-line aligned already (being page aligned)
* -@sz will be integral multiple of line size (being page sized).
*/
if (!full_page_op) {
sz += paddr & ~CACHE_LINE_MASK;
paddr &= CACHE_LINE_MASK;
}
num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
while (num_lines-- > 0) {
write_aux_reg(aux_cmd, paddr);
paddr += L1_CACHE_BYTES;
}
}
#if (CONFIG_ARC_MMU_VER < 3)
#define __cache_line_loop __cache_line_loop_v2
#elif (CONFIG_ARC_MMU_VER == 3)
#define __cache_line_loop __cache_line_loop_v3
#elif (CONFIG_ARC_MMU_VER > 3)
#define __cache_line_loop __cache_line_loop_v4
#endif
#ifdef CONFIG_ARC_HAS_DCACHE
/***************************************************************
* Machine specific helpers for Entire D-Cache or Per Line ops
*/
static inline void __before_dc_op(const int op)
{
if (op == OP_FLUSH_N_INV) {
/* Dcache provides 2 cmd: FLUSH or INV
* INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
* flush-n-inv is achieved by INV cmd but with IM=1
* So toggle INV sub-mode depending on op request and default
*/
const unsigned int ctl = ARC_REG_DC_CTRL;
write_aux_reg(ctl, read_aux_reg(ctl) | DC_CTRL_INV_MODE_FLUSH);
}
}
static inline void __after_dc_op(const int op)
{
if (op & OP_FLUSH) {
const unsigned int ctl = ARC_REG_DC_CTRL;
unsigned int reg;
/* flush / flush-n-inv both wait */
while ((reg = read_aux_reg(ctl)) & DC_CTRL_FLUSH_STATUS)
;
/* Switch back to default Invalidate mode */
if (op == OP_FLUSH_N_INV)
write_aux_reg(ctl, reg & ~DC_CTRL_INV_MODE_FLUSH);
}
}
/*
* Operation on Entire D-Cache
* @op = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV}
* Note that constant propagation ensures all the checks are gone
* in generated code
*/
static inline void __dc_entire_op(const int op)
{
int aux;
__before_dc_op(op);
if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */
aux = ARC_REG_DC_IVDC;
else
aux = ARC_REG_DC_FLSH;
write_aux_reg(aux, 0x1);
__after_dc_op(op);
}
/* For kernel mappings cache operation: index is same as paddr */
#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op)
/*
* D-Cache Line ops: Per Line INV (discard or wback+discard) or FLUSH (wback)
*/
static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
unsigned long flags;
local_irq_save(flags);
__before_dc_op(op);
__cache_line_loop(paddr, vaddr, sz, op);
__after_dc_op(op);
local_irq_restore(flags);
}
#else
#define __dc_entire_op(op)
#define __dc_line_op(paddr, vaddr, sz, op)
#define __dc_line_op_k(paddr, sz, op)
#endif /* CONFIG_ARC_HAS_DCACHE */
#ifdef CONFIG_ARC_HAS_ICACHE
static inline void __ic_entire_inv(void)
{
write_aux_reg(ARC_REG_IC_IVIC, 1);
read_aux_reg(ARC_REG_IC_CTRL); /* blocks */
}
static inline void
__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
unsigned long sz)
{
unsigned long flags;
local_irq_save(flags);
(*_cache_line_loop_ic_fn)(paddr, vaddr, sz, OP_INV_IC);
local_irq_restore(flags);
}
#ifndef CONFIG_SMP
#define __ic_line_inv_vaddr(p, v, s) __ic_line_inv_vaddr_local(p, v, s)
#else
struct ic_inv_args {
unsigned long paddr, vaddr;
int sz;
};
static void __ic_line_inv_vaddr_helper(void *info)
{
struct ic_inv_args *ic_inv = info;
__ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
}
static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
unsigned long sz)
{
struct ic_inv_args ic_inv = {
.paddr = paddr,
.vaddr = vaddr,
.sz = sz
};
on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1);
}
#endif /* CONFIG_SMP */
#else /* !CONFIG_ARC_HAS_ICACHE */
#define __ic_entire_inv()
#define __ic_line_inv_vaddr(pstart, vstart, sz)
#endif /* CONFIG_ARC_HAS_ICACHE */
noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
{
#ifdef CONFIG_ISA_ARCV2
/*
* SLC is shared between all cores and concurrent aux operations from
* multiple cores need to be serialized using a spinlock
* A concurrent operation can be silently ignored and/or the old/new
* operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
* below)
*/
static DEFINE_SPINLOCK(lock);
unsigned long flags;
unsigned int ctrl;
spin_lock_irqsave(&lock, flags);
/*
* The Region Flush operation is specified by CTRL.RGN_OP[11..9]
* - b'000 (default) is Flush,
* - b'001 is Invalidate if CTRL.IM == 0
* - b'001 is Flush-n-Invalidate if CTRL.IM == 1
*/
ctrl = read_aux_reg(ARC_REG_SLC_CTRL);
/* Don't rely on default value of IM bit */
if (!(op & OP_FLUSH)) /* i.e. OP_INV */
ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */
else
ctrl |= SLC_CTRL_IM;
if (op & OP_INV)
ctrl |= SLC_CTRL_RGN_OP_INV; /* Inv or flush-n-inv */
else
ctrl &= ~SLC_CTRL_RGN_OP_INV;
write_aux_reg(ARC_REG_SLC_CTRL, ctrl);
/*
* Lower bits are ignored, no need to clip
* END needs to be setup before START (latter triggers the operation)
* END can't be same as START, so add (l2_line_sz - 1) to sz
*/
write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
spin_unlock_irqrestore(&lock, flags);
#endif
}
/***********************************************************
* Exported APIs
*/
/*
* Handle cache congruency of kernel and userspace mappings of page when kernel
* writes-to/reads-from
*
* The idea is to defer flushing of kernel mapping after a WRITE, possible if:
* -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
* -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
* -In SMP, if hardware caches are coherent
*
* There's a corollary case, where kernel READs from a userspace mapped page.
* If the U-mapping is not congruent to to K-mapping, former needs flushing.
*/
void flush_dcache_page(struct page *page)
{
struct address_space *mapping;
if (!cache_is_vipt_aliasing()) {
clear_bit(PG_dc_clean, &page->flags);
return;
}
/* don't handle anon pages here */
mapping = page_mapping(page);
if (!mapping)
return;
/*
* pagecache page, file not yet mapped to userspace
* Make a note that K-mapping is dirty
*/
if (!mapping_mapped(mapping)) {
clear_bit(PG_dc_clean, &page->flags);
} else if (page_mapped(page)) {
/* kernel reading from page with U-mapping */
unsigned long paddr = (unsigned long)page_address(page);
unsigned long vaddr = page->index << PAGE_CACHE_SHIFT;
if (addr_not_cache_congruent(paddr, vaddr))
__flush_dcache_page(paddr, vaddr);
}
}
EXPORT_SYMBOL(flush_dcache_page);
/*
* DMA ops for systems with L1 cache only
* Make memory coherent with L1 cache by flushing/invalidating L1 lines
*/
static void __dma_cache_wback_inv_l1(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
}
static void __dma_cache_inv_l1(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_INV);
}
static void __dma_cache_wback_l1(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH);
}
/*
* DMA ops for systems with both L1 and L2 caches, but without IOC
* Both L1 and L2 lines need to be explicity flushed/invalidated
*/
static void __dma_cache_wback_inv_slc(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
slc_op(start, sz, OP_FLUSH_N_INV);
}
static void __dma_cache_inv_slc(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_INV);
slc_op(start, sz, OP_INV);
}
static void __dma_cache_wback_slc(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH);
slc_op(start, sz, OP_FLUSH);
}
/*
* DMA ops for systems with IOC
* IOC hardware snoops all DMA traffic keeping the caches consistent with
* memory - eliding need for any explicit cache maintenance of DMA buffers
*/
static void __dma_cache_wback_inv_ioc(unsigned long start, unsigned long sz) {}
static void __dma_cache_inv_ioc(unsigned long start, unsigned long sz) {}
static void __dma_cache_wback_ioc(unsigned long start, unsigned long sz) {}
/*
* Exported DMA API
*/
void dma_cache_wback_inv(unsigned long start, unsigned long sz)
{
__dma_cache_wback_inv(start, sz);
}
EXPORT_SYMBOL(dma_cache_wback_inv);
void dma_cache_inv(unsigned long start, unsigned long sz)
{
__dma_cache_inv(start, sz);
}
EXPORT_SYMBOL(dma_cache_inv);
void dma_cache_wback(unsigned long start, unsigned long sz)
{
__dma_cache_wback(start, sz);
}
EXPORT_SYMBOL(dma_cache_wback);
/*
* This is API for making I/D Caches consistent when modifying
* kernel code (loadable modules, kprobes, kgdb...)
* This is called on insmod, with kernel virtual address for CODE of
* the module. ARC cache maintenance ops require PHY address thus we
* need to convert vmalloc addr to PHY addr
*/
void flush_icache_range(unsigned long kstart, unsigned long kend)
{
unsigned int tot_sz;
WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__);
/* Shortcut for bigger flush ranges.
* Here we don't care if this was kernel virtual or phy addr
*/
tot_sz = kend - kstart;
if (tot_sz > PAGE_SIZE) {
flush_cache_all();
return;
}
/* Case: Kernel Phy addr (0x8000_0000 onwards) */
if (likely(kstart > PAGE_OFFSET)) {
/*
* The 2nd arg despite being paddr will be used to index icache
* This is OK since no alternate virtual mappings will exist
* given the callers for this case: kprobe/kgdb in built-in
* kernel code only.
*/
__sync_icache_dcache(kstart, kstart, kend - kstart);
return;
}
/*
* Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff)
* (1) ARC Cache Maintenance ops only take Phy addr, hence special
* handling of kernel vaddr.
*
* (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already),
* it still needs to handle a 2 page scenario, where the range
* straddles across 2 virtual pages and hence need for loop
*/
while (tot_sz > 0) {
unsigned int off, sz;
unsigned long phy, pfn;
off = kstart % PAGE_SIZE;
pfn = vmalloc_to_pfn((void *)kstart);
phy = (pfn << PAGE_SHIFT) + off;
sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off);
__sync_icache_dcache(phy, kstart, sz);
kstart += sz;
tot_sz -= sz;
}
}
EXPORT_SYMBOL(flush_icache_range);
/*
* General purpose helper to make I and D cache lines consistent.
* @paddr is phy addr of region
* @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
* However in one instance, when called by kprobe (for a breakpt in
* builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
* use a paddr to index the cache (despite VIPT). This is fine since since a
* builtin kernel page will not have any virtual mappings.
* kprobe on loadable module will be kernel vaddr.
*/
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
{
__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
__ic_line_inv_vaddr(paddr, vaddr, len);
}
/* wrapper to compile time eliminate alignment checks in flush loop */
void __inv_icache_page(unsigned long paddr, unsigned long vaddr)
{
__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
}
/*
* wrapper to clearout kernel or userspace mappings of a page
* For kernel mappings @vaddr == @paddr
*/
void __flush_dcache_page(unsigned long paddr, unsigned long vaddr)
{
__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
}
noinline void flush_cache_all(void)
{
unsigned long flags;
local_irq_save(flags);
__ic_entire_inv();
__dc_entire_op(OP_FLUSH_N_INV);
local_irq_restore(flags);
}
#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
void flush_cache_mm(struct mm_struct *mm)
{
flush_cache_all();
}
void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
unsigned long pfn)
{
unsigned int paddr = pfn << PAGE_SHIFT;
u_vaddr &= PAGE_MASK;
__flush_dcache_page(paddr, u_vaddr);
if (vma->vm_flags & VM_EXEC)
__inv_icache_page(paddr, u_vaddr);
}
void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
{
flush_cache_all();
}
void flush_anon_page(struct vm_area_struct *vma, struct page *page,
unsigned long u_vaddr)
{
/* TBD: do we really need to clear the kernel mapping */
__flush_dcache_page(page_address(page), u_vaddr);
__flush_dcache_page(page_address(page), page_address(page));
}
#endif
void copy_user_highpage(struct page *to, struct page *from,
unsigned long u_vaddr, struct vm_area_struct *vma)
{
unsigned long kfrom = (unsigned long)page_address(from);
unsigned long kto = (unsigned long)page_address(to);
int clean_src_k_mappings = 0;
/*
* If SRC page was already mapped in userspace AND it's U-mapping is
* not congruent with K-mapping, sync former to physical page so that
* K-mapping in memcpy below, sees the right data
*
* Note that while @u_vaddr refers to DST page's userspace vaddr, it is
* equally valid for SRC page as well
*/
if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
__flush_dcache_page(kfrom, u_vaddr);
clean_src_k_mappings = 1;
}
copy_page((void *)kto, (void *)kfrom);
/*
* Mark DST page K-mapping as dirty for a later finalization by
* update_mmu_cache(). Although the finalization could have been done
* here as well (given that both vaddr/paddr are available).
* But update_mmu_cache() already has code to do that for other
* non copied user pages (e.g. read faults which wire in pagecache page
* directly).
*/
clear_bit(PG_dc_clean, &to->flags);
/*
* if SRC was already usermapped and non-congruent to kernel mapping
* sync the kernel mapping back to physical page
*/
if (clean_src_k_mappings) {
__flush_dcache_page(kfrom, kfrom);
set_bit(PG_dc_clean, &from->flags);
} else {
clear_bit(PG_dc_clean, &from->flags);
}
}
void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
{
clear_page(to);
clear_bit(PG_dc_clean, &page->flags);
}
/**********************************************************************
* Explicit Cache flush request from user space via syscall
* Needed for JITs which generate code on the fly
*/
SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
{
/* TBD: optimize this */
flush_cache_all();
return 0;
}
void arc_cache_init(void)
{
unsigned int __maybe_unused cpu = smp_processor_id();
char str[256];
printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
if (!ic->ver)
panic("cache support enabled but non-existent cache\n");
if (ic->line_len != L1_CACHE_BYTES)
panic("ICache line [%d] != kernel Config [%d]",
ic->line_len, L1_CACHE_BYTES);
if (ic->ver != CONFIG_ARC_MMU_VER)
panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
ic->ver, CONFIG_ARC_MMU_VER);
/*
* In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG
* pair to provide vaddr/paddr respectively, just as in MMU v3
*/
if (is_isa_arcv2() && ic->alias)
_cache_line_loop_ic_fn = __cache_line_loop_v3;
else
_cache_line_loop_ic_fn = __cache_line_loop;
}
if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
if (!dc->ver)
panic("cache support enabled but non-existent cache\n");
if (dc->line_len != L1_CACHE_BYTES)
panic("DCache line [%d] != kernel Config [%d]",
dc->line_len, L1_CACHE_BYTES);
/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
if (is_isa_arcompact()) {
int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
if (dc->alias && !handled)
panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
else if (!dc->alias && handled)
panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
}
}
if (is_isa_arcv2() && ioc_exists) {
/* IO coherency base - 0x8z */
write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
/* IO coherency aperture size - 512Mb: 0x8z-0xAz */
write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
/* Enable partial writes */
write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
/* Enable IO coherency */
write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
__dma_cache_inv = __dma_cache_inv_ioc;
__dma_cache_wback = __dma_cache_wback_ioc;
} else if (is_isa_arcv2() && l2_line_sz) {
__dma_cache_wback_inv = __dma_cache_wback_inv_slc;
__dma_cache_inv = __dma_cache_inv_slc;
__dma_cache_wback = __dma_cache_wback_slc;
} else {
__dma_cache_wback_inv = __dma_cache_wback_inv_l1;
__dma_cache_inv = __dma_cache_inv_l1;
__dma_cache_wback = __dma_cache_wback_l1;
}
}