mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-12 13:34:10 +08:00
c6807970c3
Add driver support for the UART routing control. Users can perform runtime configuration of the RX muxes among the UART controllers and the UART IO pins. The sysfs interface is also exported for the convenience of routing paths check and update. Signed-off-by: Oskar Senft <osk@google.com> Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Lei YU <yulei.sh@bytedance.com> Link: https://lore.kernel.org/r/20210927023053.6728-5-chiawei_wang@aspeedtech.com Link: https://lore.kernel.org/r/20211022000616.481772-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
28 lines
1.0 KiB
Plaintext
28 lines
1.0 KiB
Plaintext
What: /sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
|
|
Date: September 2021
|
|
Contact: Oskar Senft <osk@google.com>
|
|
Chia-Wei Wang <chiawei_wang@aspeedtech.com>
|
|
Description: Selects the RX source of the UARTx device.
|
|
|
|
When read, each file shows the list of available options with currently
|
|
selected option marked by brackets "[]". The list of available options
|
|
depends on the selected file.
|
|
|
|
e.g.
|
|
cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
|
|
[io1] io2 io3 io4 uart2 uart3 uart4 io6
|
|
|
|
In this case, UART1 gets its input from IO1 (physical serial port 1).
|
|
|
|
Users: OpenBMC. Proposed changes should be mailed to
|
|
openbmc@lists.ozlabs.org
|
|
|
|
What: /sys/bus/platform/drivers/aspeed-uart-routing/*/io*
|
|
Date: September 2021
|
|
Contact: Oskar Senft <osk@google.com>
|
|
Chia-Wei Wang <chiawei_wang@aspeedtech.com>
|
|
Description: Selects the RX source of IOx serial port. The current selection
|
|
will be marked by brackets "[]".
|
|
Users: OpenBMC. Proposed changes should be mailed to
|
|
openbmc@lists.ozlabs.org
|