mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-16 15:34:48 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
1016 lines
25 KiB
C
1016 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Silicon Labs Si2146/2147/2148/2157/2158 silicon tuner driver
|
|
*
|
|
* Copyright (C) 2014 Antti Palosaari <crope@iki.fi>
|
|
*/
|
|
|
|
#include "si2157_priv.h"
|
|
|
|
static const struct dvb_tuner_ops si2157_ops;
|
|
|
|
static int tuner_lock_debug;
|
|
module_param(tuner_lock_debug, int, 0644);
|
|
MODULE_PARM_DESC(tuner_lock_debug, "if set, signal lock is briefly waited on after setting params");
|
|
|
|
/* execute firmware command */
|
|
static int si2157_cmd_execute(struct i2c_client *client, struct si2157_cmd *cmd)
|
|
{
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
int ret;
|
|
unsigned long timeout;
|
|
|
|
mutex_lock(&dev->i2c_mutex);
|
|
|
|
if (cmd->wlen) {
|
|
/* write cmd and args for firmware */
|
|
ret = i2c_master_send(client, cmd->args, cmd->wlen);
|
|
if (ret < 0) {
|
|
goto err_mutex_unlock;
|
|
} else if (ret != cmd->wlen) {
|
|
ret = -EREMOTEIO;
|
|
goto err_mutex_unlock;
|
|
}
|
|
}
|
|
|
|
if (cmd->rlen) {
|
|
/* wait cmd execution terminate */
|
|
#define TIMEOUT 80
|
|
timeout = jiffies + msecs_to_jiffies(TIMEOUT);
|
|
while (!time_after(jiffies, timeout)) {
|
|
ret = i2c_master_recv(client, cmd->args, cmd->rlen);
|
|
if (ret < 0) {
|
|
goto err_mutex_unlock;
|
|
} else if (ret != cmd->rlen) {
|
|
ret = -EREMOTEIO;
|
|
goto err_mutex_unlock;
|
|
}
|
|
|
|
/* firmware ready? */
|
|
if ((cmd->args[0] >> 7) & 0x01)
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "cmd execution took %d ms, status=%x\n",
|
|
jiffies_to_msecs(jiffies) -
|
|
(jiffies_to_msecs(timeout) - TIMEOUT),
|
|
cmd->args[0]);
|
|
|
|
if (!((cmd->args[0] >> 7) & 0x01)) {
|
|
ret = -ETIMEDOUT;
|
|
goto err_mutex_unlock;
|
|
}
|
|
/* check error status bit */
|
|
if (cmd->args[0] & 0x40) {
|
|
ret = -EAGAIN;
|
|
goto err_mutex_unlock;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&dev->i2c_mutex);
|
|
return 0;
|
|
|
|
err_mutex_unlock:
|
|
mutex_unlock(&dev->i2c_mutex);
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct si2157_tuner_info si2157_tuners[] = {
|
|
{ SI2141, 0x60, false, SI2141_60_FIRMWARE, SI2141_A10_FIRMWARE },
|
|
{ SI2141, 0x61, false, SI2141_61_FIRMWARE, SI2141_A10_FIRMWARE },
|
|
{ SI2146, 0x11, false, SI2146_11_FIRMWARE, NULL },
|
|
{ SI2147, 0x50, false, SI2147_50_FIRMWARE, NULL },
|
|
{ SI2148, 0x32, true, SI2148_32_FIRMWARE, SI2158_A20_FIRMWARE },
|
|
{ SI2148, 0x33, true, SI2148_33_FIRMWARE, SI2158_A20_FIRMWARE },
|
|
{ SI2157, 0x50, false, SI2157_50_FIRMWARE, SI2157_A30_FIRMWARE },
|
|
{ SI2158, 0x50, false, SI2158_50_FIRMWARE, SI2158_A20_FIRMWARE },
|
|
{ SI2158, 0x51, false, SI2158_51_FIRMWARE, SI2158_A20_FIRMWARE },
|
|
{ SI2177, 0x50, false, SI2177_50_FIRMWARE, SI2157_A30_FIRMWARE },
|
|
};
|
|
|
|
static int si2157_load_firmware(struct dvb_frontend *fe,
|
|
const char *fw_name)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
const struct firmware *fw;
|
|
int ret, len, remaining;
|
|
struct si2157_cmd cmd;
|
|
|
|
/* request the firmware, this will block and timeout */
|
|
ret = firmware_request_nowarn(&fw, fw_name, &client->dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* firmware should be n chunks of 17 bytes */
|
|
if (fw->size % 17 != 0) {
|
|
dev_err(&client->dev, "firmware file '%s' is invalid\n",
|
|
fw_name);
|
|
ret = -EINVAL;
|
|
goto err_release_firmware;
|
|
}
|
|
|
|
dev_info(&client->dev, "downloading firmware from file '%s'\n",
|
|
fw_name);
|
|
|
|
for (remaining = fw->size; remaining > 0; remaining -= 17) {
|
|
len = fw->data[fw->size - remaining];
|
|
if (len > SI2157_ARGLEN) {
|
|
dev_err(&client->dev, "Bad firmware length\n");
|
|
ret = -EINVAL;
|
|
goto err_release_firmware;
|
|
}
|
|
memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len);
|
|
cmd.wlen = len;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware download failed %d\n",
|
|
ret);
|
|
goto err_release_firmware;
|
|
}
|
|
}
|
|
|
|
err_release_firmware:
|
|
release_firmware(fw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int si2157_find_and_load_firmware(struct dvb_frontend *fe)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
const char *fw_alt_name = NULL;
|
|
unsigned char part_id, rom_id;
|
|
const char *fw_name = NULL;
|
|
struct si2157_cmd cmd;
|
|
bool required = true;
|
|
int ret, i;
|
|
|
|
if (dev->dont_load_firmware) {
|
|
dev_info(&client->dev,
|
|
"device is buggy, skipping firmware download\n");
|
|
return 0;
|
|
}
|
|
|
|
/* query chip revision */
|
|
memcpy(cmd.args, "\x02", 1);
|
|
cmd.wlen = 1;
|
|
cmd.rlen = 13;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
part_id = cmd.args[2];
|
|
rom_id = cmd.args[12];
|
|
|
|
for (i = 0; i < ARRAY_SIZE(si2157_tuners); i++) {
|
|
if (si2157_tuners[i].part_id != part_id)
|
|
continue;
|
|
required = si2157_tuners[i].required;
|
|
fw_alt_name = si2157_tuners[i].fw_alt_name;
|
|
|
|
/* Both part and rom ID match */
|
|
if (si2157_tuners[i].rom_id == rom_id) {
|
|
fw_name = si2157_tuners[i].fw_name;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (required && !fw_name && !fw_alt_name) {
|
|
dev_err(&client->dev,
|
|
"unknown chip version Si21%d-%c%c%c ROM 0x%02x\n",
|
|
part_id, cmd.args[1], cmd.args[3], cmd.args[4], rom_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Update the part id based on device's report */
|
|
dev->part_id = part_id;
|
|
|
|
dev_info(&client->dev,
|
|
"found a 'Silicon Labs Si21%d-%c%c%c ROM 0x%02x'\n",
|
|
part_id, cmd.args[1], cmd.args[3], cmd.args[4], rom_id);
|
|
|
|
if (fw_name)
|
|
ret = si2157_load_firmware(fe, fw_name);
|
|
else
|
|
ret = -ENOENT;
|
|
|
|
/* Try alternate name, if any */
|
|
if (ret == -ENOENT && fw_alt_name)
|
|
ret = si2157_load_firmware(fe, fw_alt_name);
|
|
|
|
if (ret == -ENOENT) {
|
|
if (!required) {
|
|
dev_info(&client->dev, "Using ROM firmware.\n");
|
|
return 0;
|
|
}
|
|
dev_err(&client->dev, "Can't continue without a firmware.\n");
|
|
} else if (ret < 0) {
|
|
dev_err(&client->dev, "error %d when loading firmware\n", ret);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int si2157_init(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
unsigned int xtal_trim;
|
|
struct si2157_cmd cmd;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* Try to get Xtal trim property, to verify tuner still running */
|
|
memcpy(cmd.args, "\x15\x00\x02\x04", 4);
|
|
cmd.wlen = 4;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
|
|
xtal_trim = cmd.args[2] | (cmd.args[3] << 8);
|
|
|
|
if (ret == 0 && xtal_trim < 16)
|
|
goto warm;
|
|
|
|
dev->if_frequency = 0; /* we no longer know current tuner state */
|
|
|
|
/* power up */
|
|
if (dev->part_id == SI2146) {
|
|
/* clock_mode = XTAL, clock_freq = 24MHz */
|
|
memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
|
|
cmd.wlen = 9;
|
|
} else if (dev->part_id == SI2141) {
|
|
/* clock_mode: XTAL, xout enabled */
|
|
memcpy(cmd.args, "\xc0\x00\x0d\x0e\x00\x01\x01\x01\x01\x03", 10);
|
|
cmd.wlen = 10;
|
|
} else {
|
|
memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
|
|
cmd.wlen = 15;
|
|
}
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret && (dev->part_id != SI2141 || ret != -EAGAIN))
|
|
goto err;
|
|
|
|
/* Si2141 needs a wake up command */
|
|
if (dev->part_id == SI2141) {
|
|
memcpy(cmd.args, "\xc0\x08\x01\x02\x00\x00\x01", 7);
|
|
cmd.wlen = 7;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* Try to load the firmware */
|
|
ret = si2157_find_and_load_firmware(fe);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* reboot the tuner with new firmware? */
|
|
memcpy(cmd.args, "\x01\x01", 2);
|
|
cmd.wlen = 2;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* query firmware version */
|
|
memcpy(cmd.args, "\x11", 1);
|
|
cmd.wlen = 1;
|
|
cmd.rlen = 10;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_info(&client->dev, "firmware version: %c.%c.%d\n",
|
|
cmd.args[6], cmd.args[7], cmd.args[8]);
|
|
|
|
/* enable tuner status flags */
|
|
memcpy(cmd.args, "\x14\x00\x01\x05\x01\x00", 6);
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
memcpy(cmd.args, "\x14\x00\x01\x06\x01\x00", 6);
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
memcpy(cmd.args, "\x14\x00\x01\x07\x01\x00", 6);
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
warm:
|
|
/* init statistics in order signal app which are supported */
|
|
c->strength.len = 1;
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
/* start statistics polling */
|
|
schedule_delayed_work(&dev->stat_work, msecs_to_jiffies(1000));
|
|
|
|
dev->active = true;
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int si2157_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
int ret;
|
|
struct si2157_cmd cmd;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
dev->active = false;
|
|
|
|
/* stop statistics polling */
|
|
cancel_delayed_work_sync(&dev->stat_work);
|
|
|
|
/* standby */
|
|
memcpy(cmd.args, "\x16\x00", 2);
|
|
cmd.wlen = 2;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int si2157_tune_wait(struct i2c_client *client, u8 is_digital)
|
|
{
|
|
#define TUN_TIMEOUT 40
|
|
#define DIG_TIMEOUT 30
|
|
#define ANALOG_TIMEOUT 150
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
int ret;
|
|
unsigned long timeout;
|
|
unsigned long start_time;
|
|
u8 wait_status;
|
|
u8 tune_lock_mask;
|
|
|
|
if (is_digital)
|
|
tune_lock_mask = 0x04;
|
|
else
|
|
tune_lock_mask = 0x02;
|
|
|
|
mutex_lock(&dev->i2c_mutex);
|
|
|
|
/* wait tuner command complete */
|
|
start_time = jiffies;
|
|
timeout = start_time + msecs_to_jiffies(TUN_TIMEOUT);
|
|
while (1) {
|
|
ret = i2c_master_recv(client, &wait_status,
|
|
sizeof(wait_status));
|
|
if (ret < 0) {
|
|
goto err_mutex_unlock;
|
|
} else if (ret != sizeof(wait_status)) {
|
|
ret = -EREMOTEIO;
|
|
goto err_mutex_unlock;
|
|
}
|
|
|
|
if (time_after(jiffies, timeout))
|
|
break;
|
|
|
|
/* tuner done? */
|
|
if ((wait_status & 0x81) == 0x81)
|
|
break;
|
|
usleep_range(5000, 10000);
|
|
}
|
|
|
|
dev_dbg(&client->dev, "tuning took %d ms, status=0x%x\n",
|
|
jiffies_to_msecs(jiffies) - jiffies_to_msecs(start_time),
|
|
wait_status);
|
|
|
|
/* if we tuned ok, wait a bit for tuner lock */
|
|
if (tuner_lock_debug && (wait_status & 0x81) == 0x81) {
|
|
if (is_digital)
|
|
timeout = jiffies + msecs_to_jiffies(DIG_TIMEOUT);
|
|
else
|
|
timeout = jiffies + msecs_to_jiffies(ANALOG_TIMEOUT);
|
|
|
|
while (!time_after(jiffies, timeout)) {
|
|
ret = i2c_master_recv(client, &wait_status,
|
|
sizeof(wait_status));
|
|
if (ret < 0) {
|
|
goto err_mutex_unlock;
|
|
} else if (ret != sizeof(wait_status)) {
|
|
ret = -EREMOTEIO;
|
|
goto err_mutex_unlock;
|
|
}
|
|
|
|
/* tuner locked? */
|
|
if (wait_status & tune_lock_mask)
|
|
break;
|
|
usleep_range(5000, 10000);
|
|
}
|
|
|
|
dev_dbg(&client->dev, "tuning+lock took %d ms, status=0x%x\n",
|
|
jiffies_to_msecs(jiffies) - jiffies_to_msecs(start_time),
|
|
wait_status);
|
|
}
|
|
|
|
if ((wait_status & 0xc0) != 0x80) {
|
|
ret = -ETIMEDOUT;
|
|
goto err_mutex_unlock;
|
|
}
|
|
|
|
mutex_unlock(&dev->i2c_mutex);
|
|
return 0;
|
|
|
|
err_mutex_unlock:
|
|
mutex_unlock(&dev->i2c_mutex);
|
|
dev_err(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int si2157_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret;
|
|
struct si2157_cmd cmd;
|
|
u8 bw, delivery_system;
|
|
u32 bandwidth;
|
|
u32 if_frequency = 5000000;
|
|
|
|
dev_dbg(&client->dev,
|
|
"delivery_system=%d frequency=%u bandwidth_hz=%u\n",
|
|
c->delivery_system, c->frequency, c->bandwidth_hz);
|
|
|
|
if (!dev->active) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
if (SUPPORTS_1700KHz(dev) && c->bandwidth_hz <= 1700000) {
|
|
bandwidth = 1700000;
|
|
bw = 9;
|
|
} else if (c->bandwidth_hz <= 6000000) {
|
|
bandwidth = 6000000;
|
|
bw = 6;
|
|
} else if (SUPPORTS_1700KHz(dev) && c->bandwidth_hz <= 6100000) {
|
|
bandwidth = 6100000;
|
|
bw = 10;
|
|
} else if (c->bandwidth_hz <= 7000000) {
|
|
bandwidth = 7000000;
|
|
bw = 7;
|
|
} else {
|
|
bandwidth = 8000000;
|
|
bw = 8;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_ATSC:
|
|
delivery_system = 0x00;
|
|
if_frequency = 3250000;
|
|
break;
|
|
case SYS_DVBC_ANNEX_B:
|
|
delivery_system = 0x10;
|
|
if_frequency = 4000000;
|
|
break;
|
|
case SYS_DVBT:
|
|
case SYS_DVBT2: /* it seems DVB-T and DVB-T2 both are 0x20 here */
|
|
delivery_system = 0x20;
|
|
break;
|
|
case SYS_DVBC_ANNEX_A:
|
|
case SYS_DVBC_ANNEX_C:
|
|
delivery_system = 0x30;
|
|
break;
|
|
case SYS_ISDBT:
|
|
delivery_system = 0x40;
|
|
break;
|
|
case SYS_DTMB:
|
|
delivery_system = 0x60;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
memcpy(cmd.args, "\x14\x00\x03\x07\x00\x00", 6);
|
|
cmd.args[4] = delivery_system | bw;
|
|
if (dev->inversion)
|
|
cmd.args[5] = 0x01;
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* On SI2146, set DTV AGC source to DLIF_AGC_3DB */
|
|
if (dev->part_id == SI2146)
|
|
memcpy(cmd.args, "\x14\x00\x02\x07\x00\x01", 6);
|
|
else
|
|
memcpy(cmd.args, "\x14\x00\x02\x07\x00\x00", 6);
|
|
cmd.args[4] = dev->if_port;
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* set digital if frequency if needed */
|
|
if (if_frequency != dev->if_frequency) {
|
|
memcpy(cmd.args, "\x14\x00\x06\x07", 4);
|
|
cmd.args[4] = (if_frequency / 1000) & 0xff;
|
|
cmd.args[5] = ((if_frequency / 1000) >> 8) & 0xff;
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev->if_frequency = if_frequency;
|
|
}
|
|
|
|
/* set digital frequency */
|
|
memcpy(cmd.args, "\x41\x00\x00\x00\x00\x00\x00\x00", 8);
|
|
cmd.args[4] = (c->frequency >> 0) & 0xff;
|
|
cmd.args[5] = (c->frequency >> 8) & 0xff;
|
|
cmd.args[6] = (c->frequency >> 16) & 0xff;
|
|
cmd.args[7] = (c->frequency >> 24) & 0xff;
|
|
cmd.wlen = 8;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev->bandwidth = bandwidth;
|
|
dev->frequency = c->frequency;
|
|
|
|
si2157_tune_wait(client, 1); /* wait to complete, ignore any errors */
|
|
|
|
return 0;
|
|
err:
|
|
dev->bandwidth = 0;
|
|
dev->frequency = 0;
|
|
dev->if_frequency = 0;
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int si2157_set_analog_params(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
char *std; /* for debugging */
|
|
int ret;
|
|
struct si2157_cmd cmd;
|
|
u32 bandwidth = 0;
|
|
u32 if_frequency = 0;
|
|
u32 freq = 0;
|
|
u64 tmp_lval = 0;
|
|
u8 system = 0;
|
|
u8 color = 0; /* 0=NTSC/PAL, 0x10=SECAM */
|
|
u8 invert_analog = 1; /* analog tuner spectrum; 0=normal, 1=inverted */
|
|
|
|
if (!SUPPORTS_ATV_IF(dev)) {
|
|
dev_info(&client->dev, "Analog tuning not supported yet for Si21%d\n",
|
|
dev->part_id);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
if (!dev->active)
|
|
si2157_init(fe);
|
|
|
|
if (!dev->active) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
if (params->mode == V4L2_TUNER_RADIO) {
|
|
/*
|
|
* std = "fm";
|
|
* bandwidth = 1700000; //best can do for FM, AGC will be a mess though
|
|
* if_frequency = 1250000; //HVR-225x(saa7164), HVR-12xx(cx23885)
|
|
* if_frequency = 6600000; //HVR-9xx(cx231xx)
|
|
* if_frequency = 5500000; //HVR-19xx(pvrusb2)
|
|
*/
|
|
dev_err(&client->dev, "si2157 does not currently support FM radio\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
tmp_lval = params->frequency * 625LL;
|
|
do_div(tmp_lval, 10); /* convert to HZ */
|
|
freq = (u32)tmp_lval;
|
|
|
|
if (freq < 1000000) /* is freq in KHz */
|
|
freq = freq * 1000;
|
|
dev->frequency = freq;
|
|
|
|
/* if_frequency values based on tda187271C2 */
|
|
if (params->std & (V4L2_STD_B | V4L2_STD_GH)) {
|
|
if (freq >= 470000000) {
|
|
std = "palGH";
|
|
bandwidth = 8000000;
|
|
if_frequency = 6000000;
|
|
system = 1;
|
|
if (params->std &
|
|
(V4L2_STD_SECAM_G | V4L2_STD_SECAM_H)) {
|
|
std = "secamGH";
|
|
color = 0x10;
|
|
}
|
|
} else {
|
|
std = "palB";
|
|
bandwidth = 7000000;
|
|
if_frequency = 6000000;
|
|
system = 0;
|
|
if (params->std & V4L2_STD_SECAM_B) {
|
|
std = "secamB";
|
|
color = 0x10;
|
|
}
|
|
}
|
|
} else if (params->std & V4L2_STD_MN) {
|
|
std = "MN";
|
|
bandwidth = 6000000;
|
|
if_frequency = 5400000;
|
|
system = 2;
|
|
} else if (params->std & V4L2_STD_PAL_I) {
|
|
std = "palI";
|
|
bandwidth = 8000000;
|
|
if_frequency = 7250000; /* TODO: does not work yet */
|
|
system = 4;
|
|
} else if (params->std & V4L2_STD_DK) {
|
|
std = "palDK";
|
|
bandwidth = 8000000;
|
|
if_frequency = 6900000; /* TODO: does not work yet */
|
|
system = 5;
|
|
if (params->std & V4L2_STD_SECAM_DK) {
|
|
std = "secamDK";
|
|
color = 0x10;
|
|
}
|
|
} else if (params->std & V4L2_STD_SECAM_L) {
|
|
std = "secamL";
|
|
bandwidth = 8000000;
|
|
if_frequency = 6750000; /* TODO: untested */
|
|
system = 6;
|
|
color = 0x10;
|
|
} else if (params->std & V4L2_STD_SECAM_LC) {
|
|
std = "secamL'";
|
|
bandwidth = 7000000;
|
|
if_frequency = 1250000; /* TODO: untested */
|
|
system = 7;
|
|
color = 0x10;
|
|
} else {
|
|
std = "unknown";
|
|
}
|
|
/* calc channel center freq */
|
|
freq = freq - 1250000 + (bandwidth / 2);
|
|
|
|
dev_dbg(&client->dev,
|
|
"mode=%d system=%u std='%s' params->frequency=%u center freq=%u if=%u bandwidth=%u\n",
|
|
params->mode, system, std, params->frequency,
|
|
freq, if_frequency, bandwidth);
|
|
|
|
/* set analog IF port */
|
|
memcpy(cmd.args, "\x14\x00\x03\x06\x08\x02", 6);
|
|
/* in using dev->if_port, we assume analog and digital IF's */
|
|
/* are always on different ports */
|
|
/* assumes if_port definition is 0 or 1 for digital out */
|
|
cmd.args[4] = (dev->if_port == 1) ? 8 : 10;
|
|
/* Analog AGC assumed external */
|
|
cmd.args[5] = (dev->if_port == 1) ? 2 : 1;
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* set analog IF output config */
|
|
memcpy(cmd.args, "\x14\x00\x0d\x06\x94\x64", 6);
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* make this distinct from a digital IF */
|
|
dev->if_frequency = if_frequency | 1;
|
|
|
|
/* calc and set tuner analog if center frequency */
|
|
if_frequency = if_frequency + 1250000 - (bandwidth / 2);
|
|
dev_dbg(&client->dev, "IF Ctr freq=%d\n", if_frequency);
|
|
|
|
memcpy(cmd.args, "\x14\x00\x0C\x06", 4);
|
|
cmd.args[4] = (if_frequency / 1000) & 0xff;
|
|
cmd.args[5] = ((if_frequency / 1000) >> 8) & 0xff;
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* set analog AGC config */
|
|
memcpy(cmd.args, "\x14\x00\x07\x06\x32\xc8", 6);
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 4;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* set analog video mode */
|
|
memcpy(cmd.args, "\x14\x00\x04\x06\x00\x00", 6);
|
|
cmd.args[4] = system | color;
|
|
/* can use dev->inversion if assumed applies to both digital/analog */
|
|
if (invert_analog)
|
|
cmd.args[5] |= 0x02;
|
|
cmd.wlen = 6;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* set analog frequency */
|
|
memcpy(cmd.args, "\x41\x01\x00\x00\x00\x00\x00\x00", 8);
|
|
cmd.args[4] = (freq >> 0) & 0xff;
|
|
cmd.args[5] = (freq >> 8) & 0xff;
|
|
cmd.args[6] = (freq >> 16) & 0xff;
|
|
cmd.args[7] = (freq >> 24) & 0xff;
|
|
cmd.wlen = 8;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev->bandwidth = bandwidth;
|
|
|
|
si2157_tune_wait(client, 0); /* wait to complete, ignore any errors */
|
|
|
|
return 0;
|
|
err:
|
|
dev->bandwidth = 0;
|
|
dev->frequency = 0;
|
|
dev->if_frequency = 0;
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int si2157_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
|
|
*frequency = dev->frequency;
|
|
dev_dbg(&client->dev, "freq=%u\n", dev->frequency);
|
|
return 0;
|
|
}
|
|
|
|
static int si2157_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
|
|
*bandwidth = dev->bandwidth;
|
|
dev_dbg(&client->dev, "bandwidth=%u\n", dev->bandwidth);
|
|
return 0;
|
|
}
|
|
|
|
static int si2157_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
|
|
*frequency = dev->if_frequency & ~1; /* strip analog IF indicator bit */
|
|
dev_dbg(&client->dev, "if_frequency=%u\n", *frequency);
|
|
return 0;
|
|
}
|
|
|
|
static int si2157_get_rf_strength(struct dvb_frontend *fe, u16 *rssi)
|
|
{
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
struct si2157_cmd cmd;
|
|
int ret;
|
|
int strength;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
memcpy(cmd.args, "\x42\x00", 2);
|
|
cmd.wlen = 2;
|
|
cmd.rlen = 12;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
c->strength.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->strength.stat[0].svalue = (s8)cmd.args[3] * 1000;
|
|
|
|
/* normalize values based on Silicon Labs reference
|
|
* add 100, then anything > 80 is 100% signal
|
|
*/
|
|
strength = (s8)cmd.args[3] + 100;
|
|
strength = clamp_val(strength, 0, 80);
|
|
*rssi = (u16)(strength * 0xffff / 80);
|
|
|
|
dev_dbg(&client->dev, "strength=%d rssi=%u\n",
|
|
(s8)cmd.args[3], *rssi);
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_tuner_ops si2157_ops = {
|
|
.info = {
|
|
.name = "Silicon Labs Si2141/Si2146/2147/2148/2157/2158",
|
|
.frequency_min_hz = 42 * MHz,
|
|
.frequency_max_hz = 870 * MHz,
|
|
},
|
|
|
|
.init = si2157_init,
|
|
.sleep = si2157_sleep,
|
|
.set_params = si2157_set_params,
|
|
.set_analog_params = si2157_set_analog_params,
|
|
.get_frequency = si2157_get_frequency,
|
|
.get_bandwidth = si2157_get_bandwidth,
|
|
.get_if_frequency = si2157_get_if_frequency,
|
|
|
|
.get_rf_strength = si2157_get_rf_strength,
|
|
};
|
|
|
|
static void si2157_stat_work(struct work_struct *work)
|
|
{
|
|
struct si2157_dev *dev = container_of(work, struct si2157_dev, stat_work.work);
|
|
struct dvb_frontend *fe = dev->fe;
|
|
struct i2c_client *client = fe->tuner_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
struct si2157_cmd cmd;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
memcpy(cmd.args, "\x42\x00", 2);
|
|
cmd.wlen = 2;
|
|
cmd.rlen = 12;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret)
|
|
goto err;
|
|
|
|
c->strength.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->strength.stat[0].svalue = (s8) cmd.args[3] * 1000;
|
|
|
|
schedule_delayed_work(&dev->stat_work, msecs_to_jiffies(2000));
|
|
return;
|
|
err:
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
}
|
|
|
|
static int si2157_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct si2157_config *cfg = client->dev.platform_data;
|
|
struct dvb_frontend *fe = cfg->fe;
|
|
struct si2157_dev *dev;
|
|
struct si2157_cmd cmd;
|
|
int ret;
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
dev_err(&client->dev, "kzalloc() failed\n");
|
|
goto err;
|
|
}
|
|
|
|
i2c_set_clientdata(client, dev);
|
|
dev->fe = cfg->fe;
|
|
dev->inversion = cfg->inversion;
|
|
dev->dont_load_firmware = cfg->dont_load_firmware;
|
|
dev->if_port = cfg->if_port;
|
|
dev->part_id = (u8)id->driver_data;
|
|
dev->if_frequency = 5000000; /* default value of property 0x0706 */
|
|
mutex_init(&dev->i2c_mutex);
|
|
INIT_DELAYED_WORK(&dev->stat_work, si2157_stat_work);
|
|
|
|
/* check if the tuner is there */
|
|
cmd.wlen = 0;
|
|
cmd.rlen = 1;
|
|
ret = si2157_cmd_execute(client, &cmd);
|
|
if (ret && ret != -EAGAIN)
|
|
goto err_kfree;
|
|
|
|
memcpy(&fe->ops.tuner_ops, &si2157_ops, sizeof(struct dvb_tuner_ops));
|
|
fe->tuner_priv = client;
|
|
|
|
#ifdef CONFIG_MEDIA_CONTROLLER
|
|
if (cfg->mdev) {
|
|
dev->mdev = cfg->mdev;
|
|
|
|
dev->ent.name = KBUILD_MODNAME;
|
|
dev->ent.function = MEDIA_ENT_F_TUNER;
|
|
|
|
dev->pad[SI2157_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK;
|
|
dev->pad[SI2157_PAD_RF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
|
|
dev->pad[SI2157_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
|
|
dev->pad[SI2157_PAD_VID_OUT].sig_type = PAD_SIGNAL_ANALOG;
|
|
dev->pad[SI2157_PAD_AUD_OUT].flags = MEDIA_PAD_FL_SOURCE;
|
|
dev->pad[SI2157_PAD_AUD_OUT].sig_type = PAD_SIGNAL_AUDIO;
|
|
|
|
ret = media_entity_pads_init(&dev->ent, SI2157_NUM_PADS,
|
|
&dev->pad[0]);
|
|
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
ret = media_device_register_entity(cfg->mdev, &dev->ent);
|
|
if (ret) {
|
|
media_entity_cleanup(&dev->ent);
|
|
goto err_kfree;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
dev_info(&client->dev, "Silicon Labs Si21%d successfully attached\n",
|
|
dev->part_id);
|
|
|
|
return 0;
|
|
|
|
err_kfree:
|
|
kfree(dev);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static void si2157_remove(struct i2c_client *client)
|
|
{
|
|
struct si2157_dev *dev = i2c_get_clientdata(client);
|
|
struct dvb_frontend *fe = dev->fe;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* stop statistics polling */
|
|
cancel_delayed_work_sync(&dev->stat_work);
|
|
|
|
#ifdef CONFIG_MEDIA_CONTROLLER_DVB
|
|
if (dev->mdev)
|
|
media_device_unregister_entity(&dev->ent);
|
|
#endif
|
|
|
|
memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
|
|
fe->tuner_priv = NULL;
|
|
kfree(dev);
|
|
}
|
|
|
|
/*
|
|
* The part_id used here will only be used on buggy devices that don't
|
|
* accept firmware uploads. Non-buggy devices should just use "si2157" for
|
|
* all SiLabs TER tuners, as the driver should auto-detect it.
|
|
*/
|
|
static const struct i2c_device_id si2157_id_table[] = {
|
|
{"si2157", SI2157},
|
|
{"si2146", SI2146},
|
|
{"si2141", SI2141},
|
|
{"si2177", SI2177},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, si2157_id_table);
|
|
|
|
static struct i2c_driver si2157_driver = {
|
|
.driver = {
|
|
.name = "si2157",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = si2157_probe,
|
|
.remove = si2157_remove,
|
|
.id_table = si2157_id_table,
|
|
};
|
|
|
|
module_i2c_driver(si2157_driver);
|
|
|
|
MODULE_DESCRIPTION("Silicon Labs Si2141/Si2146/2147/2148/2157/2158 silicon tuner driver");
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(SI2158_A20_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2141_A10_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2157_A30_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2141_60_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2141_61_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2146_11_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2147_50_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2148_32_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2148_33_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2157_50_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2158_50_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2158_51_FIRMWARE);
|
|
MODULE_FIRMWARE(SI2177_50_FIRMWARE);
|