mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 18:44:44 +08:00
8f73a13f74
These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
338 lines
7.0 KiB
C
338 lines
7.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* AD8366 and similar Gain Amplifiers
|
|
* This driver supports the following gain amplifiers:
|
|
* AD8366 Dual-Digital Variable Gain Amplifier (VGA)
|
|
* ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
|
|
* ADL5240 Digitally controlled variable gain amplifier (VGA)
|
|
* HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator
|
|
*
|
|
* Copyright 2012-2019 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitrev.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
enum ad8366_type {
|
|
ID_AD8366,
|
|
ID_ADA4961,
|
|
ID_ADL5240,
|
|
ID_HMC1119,
|
|
};
|
|
|
|
struct ad8366_info {
|
|
int gain_min;
|
|
int gain_max;
|
|
};
|
|
|
|
struct ad8366_state {
|
|
struct spi_device *spi;
|
|
struct regulator *reg;
|
|
struct mutex lock; /* protect sensor state */
|
|
struct gpio_desc *reset_gpio;
|
|
unsigned char ch[2];
|
|
enum ad8366_type type;
|
|
struct ad8366_info *info;
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
unsigned char data[2] ____cacheline_aligned;
|
|
};
|
|
|
|
static struct ad8366_info ad8366_infos[] = {
|
|
[ID_AD8366] = {
|
|
.gain_min = 4500,
|
|
.gain_max = 20500,
|
|
},
|
|
[ID_ADA4961] = {
|
|
.gain_min = -6000,
|
|
.gain_max = 15000,
|
|
},
|
|
[ID_ADL5240] = {
|
|
.gain_min = -11500,
|
|
.gain_max = 20000,
|
|
},
|
|
[ID_HMC1119] = {
|
|
.gain_min = -31750,
|
|
.gain_max = 0,
|
|
},
|
|
};
|
|
|
|
static int ad8366_write(struct iio_dev *indio_dev,
|
|
unsigned char ch_a, unsigned char ch_b)
|
|
{
|
|
struct ad8366_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (st->type) {
|
|
case ID_AD8366:
|
|
ch_a = bitrev8(ch_a & 0x3F);
|
|
ch_b = bitrev8(ch_b & 0x3F);
|
|
|
|
st->data[0] = ch_b >> 4;
|
|
st->data[1] = (ch_b << 4) | (ch_a >> 2);
|
|
break;
|
|
case ID_ADA4961:
|
|
st->data[0] = ch_a & 0x1F;
|
|
break;
|
|
case ID_ADL5240:
|
|
st->data[0] = (ch_a & 0x3F);
|
|
break;
|
|
case ID_HMC1119:
|
|
st->data[0] = ch_a;
|
|
break;
|
|
}
|
|
|
|
ret = spi_write(st->spi, st->data, indio_dev->num_channels);
|
|
if (ret < 0)
|
|
dev_err(&indio_dev->dev, "write failed (%d)", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad8366_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct ad8366_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
int code, gain = 0;
|
|
|
|
mutex_lock(&st->lock);
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
code = st->ch[chan->channel];
|
|
|
|
switch (st->type) {
|
|
case ID_AD8366:
|
|
gain = code * 253 + 4500;
|
|
break;
|
|
case ID_ADA4961:
|
|
gain = 15000 - code * 1000;
|
|
break;
|
|
case ID_ADL5240:
|
|
gain = 20000 - 31500 + code * 500;
|
|
break;
|
|
case ID_HMC1119:
|
|
gain = -1 * code * 250;
|
|
break;
|
|
}
|
|
|
|
/* Values in dB */
|
|
*val = gain / 1000;
|
|
*val2 = (gain % 1000) * 1000;
|
|
|
|
ret = IIO_VAL_INT_PLUS_MICRO_DB;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
mutex_unlock(&st->lock);
|
|
|
|
return ret;
|
|
};
|
|
|
|
static int ad8366_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct ad8366_state *st = iio_priv(indio_dev);
|
|
struct ad8366_info *inf = st->info;
|
|
int code = 0, gain;
|
|
int ret;
|
|
|
|
/* Values in dB */
|
|
if (val < 0)
|
|
gain = (val * 1000) - (val2 / 1000);
|
|
else
|
|
gain = (val * 1000) + (val2 / 1000);
|
|
|
|
if (gain > inf->gain_max || gain < inf->gain_min)
|
|
return -EINVAL;
|
|
|
|
switch (st->type) {
|
|
case ID_AD8366:
|
|
code = (gain - 4500) / 253;
|
|
break;
|
|
case ID_ADA4961:
|
|
code = (15000 - gain) / 1000;
|
|
break;
|
|
case ID_ADL5240:
|
|
code = ((gain - 500 - 20000) / 500) & 0x3F;
|
|
break;
|
|
case ID_HMC1119:
|
|
code = (abs(gain) / 250) & 0x7F;
|
|
break;
|
|
}
|
|
|
|
mutex_lock(&st->lock);
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
st->ch[chan->channel] = code;
|
|
ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
mutex_unlock(&st->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad8366_write_raw_get_fmt(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
long mask)
|
|
{
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
return IIO_VAL_INT_PLUS_MICRO_DB;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info ad8366_info = {
|
|
.read_raw = &ad8366_read_raw,
|
|
.write_raw = &ad8366_write_raw,
|
|
.write_raw_get_fmt = &ad8366_write_raw_get_fmt,
|
|
};
|
|
|
|
#define AD8366_CHAN(_channel) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.output = 1, \
|
|
.indexed = 1, \
|
|
.channel = _channel, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),\
|
|
}
|
|
|
|
static const struct iio_chan_spec ad8366_channels[] = {
|
|
AD8366_CHAN(0),
|
|
AD8366_CHAN(1),
|
|
};
|
|
|
|
static const struct iio_chan_spec ada4961_channels[] = {
|
|
AD8366_CHAN(0),
|
|
};
|
|
|
|
static int ad8366_probe(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct ad8366_state *st;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->reg = devm_regulator_get(&spi->dev, "vcc");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
mutex_init(&st->lock);
|
|
st->spi = spi;
|
|
st->type = spi_get_device_id(spi)->driver_data;
|
|
|
|
switch (st->type) {
|
|
case ID_AD8366:
|
|
indio_dev->channels = ad8366_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
|
|
break;
|
|
case ID_ADA4961:
|
|
case ID_ADL5240:
|
|
case ID_HMC1119:
|
|
st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(st->reset_gpio)) {
|
|
ret = PTR_ERR(st->reset_gpio);
|
|
goto error_disable_reg;
|
|
}
|
|
indio_dev->channels = ada4961_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(ada4961_channels);
|
|
break;
|
|
default:
|
|
dev_err(&spi->dev, "Invalid device ID\n");
|
|
ret = -EINVAL;
|
|
goto error_disable_reg;
|
|
}
|
|
|
|
st->info = &ad8366_infos[st->type];
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->info = &ad8366_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = ad8366_write(indio_dev, 0 , 0);
|
|
if (ret < 0)
|
|
goto error_disable_reg;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
return 0;
|
|
|
|
error_disable_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad8366_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad8366_state *st = iio_priv(indio_dev);
|
|
struct regulator *reg = st->reg;
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
if (!IS_ERR(reg))
|
|
regulator_disable(reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ad8366_id[] = {
|
|
{"ad8366", ID_AD8366},
|
|
{"ada4961", ID_ADA4961},
|
|
{"adl5240", ID_ADL5240},
|
|
{"hmc1119", ID_HMC1119},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad8366_id);
|
|
|
|
static struct spi_driver ad8366_driver = {
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
},
|
|
.probe = ad8366_probe,
|
|
.remove = ad8366_remove,
|
|
.id_table = ad8366_id,
|
|
};
|
|
|
|
module_spi_driver(ad8366_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD8366 and similar Gain Amplifiers");
|
|
MODULE_LICENSE("GPL v2");
|