mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
d57eb825e0
Add support for GPIO controller from RDA Micro. This GPIO controller is an in house IP, developed by RDA Micro (now Unisoc) for the use in RDA88* series of SoCs. There are multiple GPIO ports present in all SoCs, each capable of addressing 32 GPIOs. But only first 8 pins have the interrupt capability. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20191021064413.19840-4-manivannan.sadhasivam@linaro.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
295 lines
7.7 KiB
C
295 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* RDA Micro GPIO driver
|
|
*
|
|
* Copyright (C) 2012 RDA Micro Inc.
|
|
* Copyright (C) 2019 Manivannan Sadhasivam
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define RDA_GPIO_OEN_VAL 0x00
|
|
#define RDA_GPIO_OEN_SET_OUT 0x04
|
|
#define RDA_GPIO_OEN_SET_IN 0x08
|
|
#define RDA_GPIO_VAL 0x0c
|
|
#define RDA_GPIO_SET 0x10
|
|
#define RDA_GPIO_CLR 0x14
|
|
#define RDA_GPIO_INT_CTRL_SET 0x18
|
|
#define RDA_GPIO_INT_CTRL_CLR 0x1c
|
|
#define RDA_GPIO_INT_CLR 0x20
|
|
#define RDA_GPIO_INT_STATUS 0x24
|
|
|
|
#define RDA_GPIO_IRQ_RISE_SHIFT 0
|
|
#define RDA_GPIO_IRQ_FALL_SHIFT 8
|
|
#define RDA_GPIO_DEBOUCE_SHIFT 16
|
|
#define RDA_GPIO_LEVEL_SHIFT 24
|
|
|
|
#define RDA_GPIO_IRQ_MASK 0xff
|
|
|
|
/* Each bank consists of 32 GPIOs */
|
|
#define RDA_GPIO_BANK_NR 32
|
|
|
|
struct rda_gpio {
|
|
struct gpio_chip chip;
|
|
void __iomem *base;
|
|
spinlock_t lock;
|
|
struct irq_chip irq_chip;
|
|
int irq;
|
|
};
|
|
|
|
static inline void rda_gpio_update(struct gpio_chip *chip, unsigned int offset,
|
|
u16 reg, int val)
|
|
{
|
|
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
|
|
void __iomem *base = rda_gpio->base;
|
|
unsigned long flags;
|
|
u32 tmp;
|
|
|
|
spin_lock_irqsave(&rda_gpio->lock, flags);
|
|
tmp = readl_relaxed(base + reg);
|
|
|
|
if (val)
|
|
tmp |= BIT(offset);
|
|
else
|
|
tmp &= ~BIT(offset);
|
|
|
|
writel_relaxed(tmp, base + reg);
|
|
spin_unlock_irqrestore(&rda_gpio->lock, flags);
|
|
}
|
|
|
|
static void rda_gpio_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
|
|
void __iomem *base = rda_gpio->base;
|
|
u32 offset = irqd_to_hwirq(data);
|
|
u32 value;
|
|
|
|
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
|
|
value |= BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
|
|
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
|
|
}
|
|
|
|
static void rda_gpio_irq_ack(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
rda_gpio_update(chip, offset, RDA_GPIO_INT_CLR, 1);
|
|
}
|
|
|
|
static int rda_gpio_set_irq(struct gpio_chip *chip, u32 offset,
|
|
unsigned int flow_type)
|
|
{
|
|
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
|
|
void __iomem *base = rda_gpio->base;
|
|
u32 value;
|
|
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
/* Set rising edge trigger */
|
|
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
|
|
|
|
/* Switch to edge trigger interrupt */
|
|
value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
/* Set falling edge trigger */
|
|
value = BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
|
|
|
|
/* Switch to edge trigger interrupt */
|
|
value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
/* Set both edge trigger */
|
|
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
|
|
value |= BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
|
|
|
|
/* Switch to edge trigger interrupt */
|
|
value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
/* Set high level trigger */
|
|
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
|
|
|
|
/* Switch to level trigger interrupt */
|
|
value |= BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
/* Set low level trigger */
|
|
value = BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
|
|
|
|
/* Switch to level trigger interrupt */
|
|
value |= BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
|
|
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rda_gpio_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
u32 trigger = irqd_get_trigger_type(data);
|
|
|
|
rda_gpio_set_irq(chip, offset, trigger);
|
|
}
|
|
|
|
static int rda_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
int ret;
|
|
|
|
ret = rda_gpio_set_irq(chip, offset, flow_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
else if (flow_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rda_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *chip = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *ic = irq_desc_get_chip(desc);
|
|
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
|
|
unsigned long status;
|
|
u32 n, girq;
|
|
|
|
chained_irq_enter(ic, desc);
|
|
|
|
status = readl_relaxed(rda_gpio->base + RDA_GPIO_INT_STATUS);
|
|
/* Only lower 8 bits are capable of generating interrupts */
|
|
status &= RDA_GPIO_IRQ_MASK;
|
|
|
|
for_each_set_bit(n, &status, RDA_GPIO_BANK_NR) {
|
|
girq = irq_find_mapping(chip->irq.domain, n);
|
|
generic_handle_irq(girq);
|
|
}
|
|
|
|
chained_irq_exit(ic, desc);
|
|
}
|
|
|
|
static int rda_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct gpio_irq_chip *girq;
|
|
struct rda_gpio *rda_gpio;
|
|
u32 ngpios;
|
|
int ret;
|
|
|
|
rda_gpio = devm_kzalloc(dev, sizeof(*rda_gpio), GFP_KERNEL);
|
|
if (!rda_gpio)
|
|
return -ENOMEM;
|
|
|
|
ret = device_property_read_u32(dev, "ngpios", &ngpios);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Not all ports have interrupt capability. For instance, on
|
|
* RDA8810PL, GPIOC doesn't support interrupt. So we must handle
|
|
* those also.
|
|
*/
|
|
rda_gpio->irq = platform_get_irq(pdev, 0);
|
|
|
|
rda_gpio->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(rda_gpio->base))
|
|
return PTR_ERR(rda_gpio->base);
|
|
|
|
spin_lock_init(&rda_gpio->lock);
|
|
|
|
ret = bgpio_init(&rda_gpio->chip, dev, 4,
|
|
rda_gpio->base + RDA_GPIO_VAL,
|
|
rda_gpio->base + RDA_GPIO_SET,
|
|
rda_gpio->base + RDA_GPIO_CLR,
|
|
rda_gpio->base + RDA_GPIO_OEN_SET_OUT,
|
|
rda_gpio->base + RDA_GPIO_OEN_SET_IN,
|
|
BGPIOF_READ_OUTPUT_REG_SET);
|
|
if (ret) {
|
|
dev_err(dev, "bgpio_init failed\n");
|
|
return ret;
|
|
}
|
|
|
|
rda_gpio->chip.label = dev_name(dev);
|
|
rda_gpio->chip.ngpio = ngpios;
|
|
rda_gpio->chip.base = -1;
|
|
rda_gpio->chip.parent = dev;
|
|
rda_gpio->chip.of_node = np;
|
|
|
|
if (rda_gpio->irq >= 0) {
|
|
rda_gpio->irq_chip.name = "rda-gpio",
|
|
rda_gpio->irq_chip.irq_ack = rda_gpio_irq_ack,
|
|
rda_gpio->irq_chip.irq_mask = rda_gpio_irq_mask,
|
|
rda_gpio->irq_chip.irq_unmask = rda_gpio_irq_unmask,
|
|
rda_gpio->irq_chip.irq_set_type = rda_gpio_irq_set_type,
|
|
rda_gpio->irq_chip.flags = IRQCHIP_SKIP_SET_WAKE,
|
|
|
|
girq = &rda_gpio->chip.irq;
|
|
girq->chip = &rda_gpio->irq_chip;
|
|
girq->handler = handle_bad_irq;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->parent_handler = rda_gpio_irq_handler;
|
|
girq->parent_handler_data = rda_gpio;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(dev, 1,
|
|
sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
girq->parents[0] = rda_gpio->irq;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, rda_gpio);
|
|
|
|
return devm_gpiochip_add_data(dev, &rda_gpio->chip, rda_gpio);
|
|
}
|
|
|
|
static const struct of_device_id rda_gpio_of_match[] = {
|
|
{ .compatible = "rda,8810pl-gpio", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rda_gpio_of_match);
|
|
|
|
static struct platform_driver rda_gpio_driver = {
|
|
.probe = rda_gpio_probe,
|
|
.driver = {
|
|
.name = "rda-gpio",
|
|
.of_match_table = rda_gpio_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(rda_gpio_driver, rda_gpio_probe);
|
|
|
|
MODULE_DESCRIPTION("RDA Micro GPIO driver");
|
|
MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
|
|
MODULE_LICENSE("GPL v2");
|