linux/drivers/usb/host/ehci-ppc-of.c
Uwe Kleine-König 095486c463 usb: ehci-ppc-of: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230517230239.187727-56-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-28 12:36:29 +01:00

240 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-1.0+
/*
* EHCI HCD (Host Controller Driver) for USB.
*
* Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
* Tested on AMCC PPC 440EPx
*
* Valentine Barshak <vbarshak@ru.mvista.com>
*
* Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
* and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
*
* This file is licenced under the GPL.
*/
#include <linux/err.h>
#include <linux/signal.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
static const struct hc_driver ehci_ppc_of_hc_driver = {
.description = hcd_name,
.product_desc = "OF EHCI",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
/*
* basic lifecycle operations
*/
.reset = ehci_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
/*
* 440EPx Errata USBH_3
* Fix: Enable Break Memory Transfer (BMT) in INSNREG3
*/
#define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0)
static int
ppc44x_enable_bmt(struct device_node *dn)
{
__iomem u32 *insreg_virt;
insreg_virt = of_iomap(dn, 1);
if (!insreg_virt)
return -EINVAL;
out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
iounmap(insreg_virt);
return 0;
}
static int ehci_hcd_ppc_of_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
struct ehci_hcd *ehci = NULL;
struct resource res;
int irq;
int rv;
struct device_node *np;
if (usb_disabled())
return -ENODEV;
dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
rv = of_address_to_resource(dn, 0, &res);
if (rv)
return rv;
hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = res.start;
hcd->rsrc_len = resource_size(&res);
irq = irq_of_parse_and_map(dn, 0);
if (!irq) {
dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
__FILE__);
rv = -EBUSY;
goto err_irq;
}
hcd->regs = devm_ioremap_resource(&op->dev, &res);
if (IS_ERR(hcd->regs)) {
rv = PTR_ERR(hcd->regs);
goto err_ioremap;
}
ehci = hcd_to_ehci(hcd);
np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
if (np != NULL) {
/* claim we really affected by usb23 erratum */
if (!of_address_to_resource(np, 0, &res))
ehci->ohci_hcctrl_reg =
devm_ioremap(&op->dev,
res.start + OHCI_HCCTRL_OFFSET,
OHCI_HCCTRL_LEN);
else
pr_debug("%s: no ohci offset in fdt\n", __FILE__);
if (!ehci->ohci_hcctrl_reg) {
pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
} else {
ehci->has_amcc_usb23 = 1;
}
of_node_put(np);
}
if (of_property_read_bool(dn, "big-endian")) {
ehci->big_endian_mmio = 1;
ehci->big_endian_desc = 1;
}
if (of_property_read_bool(dn, "big-endian-regs"))
ehci->big_endian_mmio = 1;
if (of_property_read_bool(dn, "big-endian-desc"))
ehci->big_endian_desc = 1;
ehci->caps = hcd->regs;
if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
rv = ppc44x_enable_bmt(dn);
ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
rv ? "NOT ": "");
}
rv = usb_add_hcd(hcd, irq, 0);
if (rv)
goto err_ioremap;
device_wakeup_enable(hcd->self.controller);
return 0;
err_ioremap:
irq_dispose_mapping(irq);
err_irq:
usb_put_hcd(hcd);
return rv;
}
static void ehci_hcd_ppc_of_remove(struct platform_device *op)
{
struct usb_hcd *hcd = platform_get_drvdata(op);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct device_node *np;
struct resource res;
dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
usb_remove_hcd(hcd);
irq_dispose_mapping(hcd->irq);
/* use request_mem_region to test if the ohci driver is loaded. if so
* ensure the ohci core is operational.
*/
if (ehci->has_amcc_usb23) {
np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
if (np != NULL) {
if (!of_address_to_resource(np, 0, &res))
if (!request_mem_region(res.start,
0x4, hcd_name))
set_ohci_hcfs(ehci, 1);
else
release_mem_region(res.start, 0x4);
else
pr_debug("%s: no ohci offset in fdt\n", __FILE__);
of_node_put(np);
}
}
usb_put_hcd(hcd);
}
static const struct of_device_id ehci_hcd_ppc_of_match[] = {
{
.compatible = "usb-ehci",
},
{},
};
MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
static struct platform_driver ehci_hcd_ppc_of_driver = {
.probe = ehci_hcd_ppc_of_probe,
.remove_new = ehci_hcd_ppc_of_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "ppc-of-ehci",
.of_match_table = ehci_hcd_ppc_of_match,
},
};