korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-15 08:14:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
eeda879bb5
linux/drivers/scsi
History
Evan Green 3f6d1767b1 phy: ufs-qcom: Refactor all init steps into phy_poweron 
The phy code was using implicit sequencing between the PHY driver
and the UFS driver to implement certain hardware requirements.
Specifically, the PHY reset register in the UFS controller needs
to be deasserted before serdes start occurs in the PHY.

Before this change, the code was doing this by utilizing the two
phy callbacks, phy_init() and phy_poweron(), as "init step 1" and
"init step 2", where the UFS driver would deassert reset between
these two steps.

This makes it challenging to power off the regulators in suspend,
as regulators are initialized in init, not in poweron(), but only
poweroff() is called during suspend, not exit().

For UFS, move the actual firing up of the PHY to phy_poweron() and
phy_poweroff() callbacks, rather than init()/exit(). UFS calls
phy_poweroff() during suspend, so now all clocks and regulators for
the phy can be powered down during suspend.

QMP is a little tricky because the PHY is also shared with PCIe and
USB3, which have their own definitions for init() and poweron(). Rename
the meaty functions to _enable() and _disable() to disentangle from the
PHY core names, and then create two different ops structures: one for
UFS and one for the other PHY types.

In phy-qcom-ufs, remove the 'is_powered_on' and 'is_started' guards,
as the generic PHY code does the reference counting. The
14/20nm-specific init functions get collapsed into the generic power_on()
function, with the addition of a calibrate() callback specific to 14/20nm.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:57 +05:30
..
aacraid SCSI misc on 20190315 2019-03-16 12:51:50 -07:00
aic7xxx scsi: remove unneeded header search paths 2019-01-29 01:22:21 -05:00
aic94xx scsi: aic94xx: fix calls to dma_set_mask_and_coherent() 2019-02-25 21:37:26 -05:00
arcmsr scsi: arcmsr: Update driver version to v1.40.00.10-20190116 2019-01-22 21:38:21 -05:00
arm scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
be2iscsi genirq/affinity: Add new callback for (re)calculating interrupt sets 2019-02-18 11:21:28 +01:00
bfa SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
bnx2fc SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
bnx2i SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
csiostor SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
cxgbi SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
cxlflash SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
device_handler scsi: return blk_status_t from device handler ->prep_fn 2018-11-09 19:17:14 -07:00
dpt
esas2r scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_template 2019-02-08 17:33:00 -05:00
fcoe scsi: fcoe: make use of fip_mode enum complete 2019-02-19 18:58:38 -05:00
fnic scsi: fnic: Remove set but not used variable 'vdev' 2019-01-29 01:16:09 -05:00
hisi_sas SCSI misc on 20190315 2019-03-16 12:51:50 -07:00
ibmvscsi scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ibmvscsi_tgt scsi: target/core: Remove the write_pending_status() callback function 2019-02-04 21:23:59 -05:00
isci scsi: isci: initialize shost fully before calling scsi_add_host() 2019-01-08 22:27:24 -05:00
libfc Revert "scsi: libfc: Add WARN_ON() when deleting rports" 2019-02-04 22:17:33 -05:00
libsas SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
lpfc SCSI misc on 20190315 2019-03-16 12:51:50 -07:00
megaraid SCSI misc on 20190315 2019-03-16 12:51:50 -07:00
mpt3sas scsi: mpt3sas: Add missing breaks in switch statements 2019-02-27 09:36:54 -05:00
mvsas scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
pcmcia scsi: pcmcia: nsp_cs: Remove unnecessary parentheses 2019-01-29 01:28:49 -05:00
pm8001 SCSI fixes on 20190118 2019-01-20 09:15:04 +12:00
qedf SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
qedi SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
qla2xxx SCSI misc on 20190315 2019-03-16 12:51:50 -07:00
qla4xxx SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
smartpqi SCSI misc on 20190315 2019-03-16 12:51:50 -07:00
snic scsi: snic: no need to check return value of debugfs_create functions 2019-01-29 00:40:54 -05:00
sym53c8xx_2 scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ufs phy: ufs-qcom: Refactor all init steps into phy_poweron 2019-04-17 14:12:57 +05:30
.gitignore
3w-9xxx.c scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent() 2019-02-25 21:37:25 -05:00
3w-9xxx.h
3w-sas.c SCSI fixes on 20190302 2019-03-02 11:39:54 -08:00
3w-sas.h
3w-xxxx.c scsi: 3w-xxxx: fix indentation issue, add missing tab 2018-12-19 21:54:07 -05:00
3w-xxxx.h scsi: 3w-xxx: fully convert to the generic DMA API 2018-10-17 21:58:51 -04:00
53c700_d.h_shipped
53c700.c scsi: 53c700: pass correct "dev" to dma_alloc_attrs() 2019-01-29 01:33:00 -05:00
53c700.h scsi: 53c700: Fix spelling of 'NEGOTIATION' 2018-08-30 07:27:22 -04:00
53c700.scr
a100u2w.c cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
a100u2w.h
a2091.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
a2091.h
a3000.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
a3000.h
a4000t.c
advansys.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.h
aha1542.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1542.h
aha1740.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1740.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
am53c974.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
atari_scsi.c nvram: Replace nvram_* function exports with static functions 2019-01-22 10:21:43 +01:00
atp870u.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
atp870u.h
BusLogic.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
BusLogic.h
bvme6000_scsi.c
ch.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
constants.c
dc395x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dc395x.h
dmx3191d.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dpt_i2o.c scsi: dpt_i2o: remove serial number usage 2019-02-27 09:19:23 -05:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
esp_scsi.h scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00
FlashPoint.c scsi: FlashPoint: Remove unnecessary parentheses 2018-09-25 20:45:53 -04:00
g_NCR5380.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gdth_ioctl.h scsi: gdth: remove dead code under #ifdef GDTH_IOCTL_PROC 2019-01-08 21:58:35 -05:00
gdth_proc.c scsi: gdth: use generic DMA API 2019-01-08 21:58:35 -05:00
gdth_proc.h scsi: gdth: remove gdth_{alloc,free}_ioctl 2019-01-08 21:57:42 -05:00
gdth.c scsi: gdth: use generic DMA API 2019-01-08 21:58:35 -05:00
gdth.h scsi: gdth: remove ISA and EISA support 2019-01-08 21:58:35 -05:00
gvp11.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gvp11.h
hosts.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
hpsa_cmd.h
hpsa.c scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_template 2019-02-08 17:33:00 -05:00
hpsa.h scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hptiop.c scsi: hptiop: fix calls to dma_set_mask() 2019-02-25 21:44:40 -05:00
hptiop.h
imm.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
imm.h
initio.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
initio.h
ipr.c scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_template 2019-02-08 17:33:00 -05:00
ipr.h scsi: ipr: System hung while dlpar adding primary ipr adapter back 2018-09-21 12:35:39 -04:00
ips.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
ips.h scsi: ips: properly handle 64-bit DMA 2018-11-06 21:31:28 -05:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: remove bidirectional command support 2019-02-05 21:29:21 -05:00
iscsi_tcp.h
jazz_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
Kconfig SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
lasi700.c
libiscsi_tcp.c scsi: libiscsi: fall back to sendmsg for slab pages 2019-03-06 19:26:45 -05:00
libiscsi.c SCSI misc on 20190315 2019-03-16 12:51:50 -07:00
mac53c94.c scsi: mac53c94: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
mac53c94.h
mac_esp.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
mac_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
Makefile scsi: remove the SCSI OSD library 2019-02-05 21:28:52 -05:00
megaraid.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
megaraid.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mesh.c cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
mesh.h
mvme16x_scsi.c
mvme147.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
mvme147.h
mvumi.c SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
mvumi.h
myrb.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
myrb.h scsi: myrb: Add Mylex RAID controller (block interface) 2018-10-17 21:06:49 -04:00
myrs.c scsi: myrs: remove the dma_boundary_limit 2018-12-19 21:43:30 -05:00
myrs.h scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
ncr53c8xx.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ncr53c8xx.h
NCR5380.c scsi: NCR5380: Return false instead of NULL 2018-11-05 22:47:38 -05:00
NCR5380.h scsi: NCR5380: Have NCR5380_select() return a bool 2018-09-28 02:17:51 -04:00
nsp32_debug.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
nsp32_io.h
nsp32.c scsi: nsp32: Remove unnecessary self assignment in nsp32_set_sync_entry 2019-01-29 01:26:57 -05:00
nsp32.h
osst_detect.h
osst_options.h
osst.c scsi: st: osst: Remove negative constant left-shifts 2019-02-27 09:10:16 -05:00
osst.h
pmcraid.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ppa.h
ps3rom.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qla1280.c scsi: qla1280: set 64bit coherent mask 2019-01-11 22:30:51 -05:00
qla1280.h
qlogicfas408.c
qlogicfas408.h
qlogicfas.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
qlogicpti.c scsi: qlogicpti: Use of_node_name_eq for node name comparisons 2019-02-13 22:07:03 -05:00
qlogicpti.h scsi: qlogicpti: Use of_node_name_eq for node name comparisons 2019-02-13 22:07:03 -05:00
raid_class.c scsi: raid_attrs: fix unused variable warning 2018-08-30 07:21:04 -04:00
script_asm.pl
scsi_common.c
scsi_debug.c SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
scsi_debugfs.c scsi: devinfo: use const_ilog2 for array indices 2018-04-20 19:14:28 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS 2018-04-20 19:14:36 -04:00
scsi_dh.c scsi: scsi_dh: replace too broad "TP9" string with the exact models 2018-04-18 19:34:08 -04:00
scsi_error.c scsi: remove bidirectional command support 2019-02-05 21:29:21 -05:00
scsi_ioctl.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
scsi_lib_dma.c
scsi_lib.c SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
scsi_logging.c
scsi_logging.h
scsi_netlink.c
scsi_pm.c scsi: core: Synchronize request queue PM status only on successful resume 2019-01-08 21:57:26 -05:00
scsi_priv.h scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_proc.c
scsi_sas_internal.h
scsi_scan.c scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c 2019-02-27 09:39:28 -05:00
scsi_sysctl.c
scsi_sysfs.c scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_trace.c
scsi_transport_api.h
scsi_transport_fc.c bsg: convert to use blk-mq 2018-11-07 13:42:32 -07:00
scsi_transport_iscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
scsi_transport_sas.c scsi: bsg-lib: handle bidi requests without block layer help 2019-02-05 21:27:40 -05:00
scsi_transport_spi.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_transport_srp.c for-4.18/block-20180603 2018-06-04 07:58:06 -07:00
scsi.c scsi: kill command serial number 2019-02-27 09:19:24 -05:00
scsi.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
scsicam.c
sd_dif.c block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sd_zbc.c scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation 2019-02-15 22:09:54 -05:00
sd.c SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
sd.h scsi: sd: Fix typo in sd_first_printk() 2019-02-12 22:33:00 -05:00
sense_codes.h
ses.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sg.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
sgiwd93.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sim710.c
sni_53c710.c
sr_ioctl.c block: Switch struct packet_command to use struct scsi_sense_hdr 2018-08-02 15:22:13 -06:00
sr_vendor.c
sr.c scsi: stop setting up request->special 2019-02-05 21:29:49 -05:00
sr.h
st_options.h
st.c scsi: st: osst: Remove negative constant left-shifts 2019-02-27 09:10:16 -05:00
st.h
stex.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
storvsc_drv.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
sun3_scsi_vme.c
sun3_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sun3x_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
sun_esp.c scsi: sun_esp: Use of_node_name_eq for node name comparisons 2018-12-07 21:56:06 -05:00
virtio_scsi.c scsi: virtio_scsi: don't send sc payload with tmfs 2019-03-06 12:35:02 -05:00
vmw_pvscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
vmw_pvscsi.h
wd33c93.c
wd33c93.h
wd719x.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
wd719x.h scsi: wd719x: use per-command private data 2018-11-15 14:27:08 -05:00
xen-scsifront.c scsi: xen-scsifront: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
zalon.c
zorro7xx.c
zorro_esp.c scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00