mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-06 02:24:14 +08:00
979bb59016
New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup. - Mediatek MT8188 SoC pin control support. - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support. - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support. Improvements: - Fix some missing pins in the Armada 37xx driver. - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro. - Fix some GPIO irq_chips to be immutable. - Massive Qualcomm device tree binding cleanup, with more to come. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmNEhjMACgkQQRCzN7AZ XXMNXRAAuqKM8b/Kw7H9S2sBgMuESk2WKe/lmJ6mQCWK1iyo0xecEQi1wN3WGZt1 DfoYHdsB45GWnRcwIVIl2wAjce72EFepCa/sut55TR/bLDxRfSiHGBKatSk5VkQp IGx75EtsRPgnZCUU3jQgrQEiI8eqj90nr8CugZwD7gocjAtaRJXb0cc3NPyk/TDh Wyku3rYuzztLCJHwsZ7Q9zh3s9b8Vb43pK9BW8HHeuODqMECaDWTEQUDetKz/Z8X v7v01PSOafBQUCoFPezz/20kOV9llxFSCeCqbwG3zvjPSjofVwSFoSH1Op4Ybr/t JWM8Py1+/G/rbsRhZuEahLJ+/eLy7SWABSUq2sxwCEr/VkzNCZ1jKH/qB1S7ZkI6 GcHPbEeCDzcN+yfKIo8p6WHUYivpj2XKXqh/BWIY63rJ3ukrq3WHuJNvCO15F/TJ PDuLIL0RdNxSanoamsplNtFWA3ap92P2P933k+v06VEZpZys8j/JHFUaysbiqpL+ GoHdRjspFC/4Ob3FwbbiYktpoKmRsZl7PCJSYnnz5nrHFUbQ4LtrgppqMgGXny16 P0pW8IBmIF4yVteodQFsyYZq2yH91TengHleqoFsK0OjYXG0BmRm3lYWLjWbojxe U7E5T5qQo2rtdVct9d47UznK3IRThDDJx9DtG+Y19VpkKiOy6j8= =PvLX -----END PGP SIGNATURE----- Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...
545 lines
15 KiB
Plaintext
545 lines
15 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# PINCTRL infrastructure and drivers
|
|
#
|
|
|
|
menuconfig PINCTRL
|
|
bool "Pin controllers"
|
|
|
|
if PINCTRL
|
|
|
|
config GENERIC_PINCTRL_GROUPS
|
|
bool
|
|
|
|
config PINMUX
|
|
bool "Support pin multiplexing controllers" if COMPILE_TEST
|
|
|
|
config GENERIC_PINMUX_FUNCTIONS
|
|
bool
|
|
select PINMUX
|
|
|
|
config PINCONF
|
|
bool "Support pin configuration controllers" if COMPILE_TEST
|
|
|
|
config GENERIC_PINCONF
|
|
bool
|
|
select PINCONF
|
|
|
|
config DEBUG_PINCTRL
|
|
bool "Debug PINCTRL calls"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
|
|
|
|
config PINCTRL_AMD
|
|
bool "AMD GPIO pin control"
|
|
depends on HAS_IOMEM
|
|
depends on ACPI || COMPILE_TEST
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
help
|
|
The driver for memory mapped GPIO functionality on AMD platforms
|
|
(x86 or arm). Most of the pins are usually muxed to some other
|
|
functionality by firmware, so only a small amount is available
|
|
for GPIO use.
|
|
|
|
Requires ACPI/FDT device enumeration code to set up a platform
|
|
device.
|
|
|
|
config PINCTRL_APPLE_GPIO
|
|
tristate "Apple SoC GPIO pin controller driver"
|
|
depends on ARCH_APPLE
|
|
select PINMUX
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select OF_GPIO
|
|
help
|
|
This is the driver for the GPIO controller found on Apple ARM SoCs,
|
|
including M1.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pinctrl-apple-gpio.
|
|
|
|
config PINCTRL_ARTPEC6
|
|
bool "Axis ARTPEC-6 pin controller driver"
|
|
depends on MACH_ARTPEC6
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This is the driver for the Axis ARTPEC-6 pin controller. This driver
|
|
supports pin function multiplexing as well as pin bias and drive
|
|
strength configuration. Device tree integration instructions can be
|
|
found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
|
|
|
|
config PINCTRL_AS3722
|
|
tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
|
|
depends on MFD_AS3722 && GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
AS3722 device supports the configuration of GPIO pins for different
|
|
functionality. This driver supports the pinmux, push-pull and
|
|
open drain configuration for the GPIO pins of AS3722 devices. It also
|
|
supports the GPIO functionality through gpiolib.
|
|
|
|
config PINCTRL_AT91
|
|
bool "AT91 pinctrl driver"
|
|
depends on OF
|
|
depends on ARCH_AT91
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say Y here to enable the at91 pinctrl driver
|
|
|
|
config PINCTRL_AT91PIO4
|
|
bool "AT91 PIO4 pinctrl driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
depends on ARCH_AT91 || COMPILE_TEST
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
|
|
controller available on sama5d2 SoC.
|
|
|
|
config PINCTRL_AXP209
|
|
tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
|
|
depends on MFD_AXP20X
|
|
depends on OF
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
help
|
|
AXP PMICs provides multiple GPIOs that can be muxed for different
|
|
functions. This driver bundles a pinctrl driver to select the function
|
|
muxing and a GPIO driver to handle the GPIO when the GPIO function is
|
|
selected.
|
|
Say Y to enable pinctrl and GPIO support for the AXP209 PMIC.
|
|
|
|
config PINCTRL_BM1880
|
|
bool "Bitmain BM1880 Pinctrl driver"
|
|
depends on OF && (ARCH_BITMAIN || COMPILE_TEST)
|
|
default ARCH_BITMAIN
|
|
select PINMUX
|
|
help
|
|
Pinctrl driver for Bitmain BM1880 SoC.
|
|
|
|
config PINCTRL_CY8C95X0
|
|
tristate "Cypress CY8C95X0 I2C pinctrl and GPIO driver"
|
|
depends on I2C
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select REGMAP_I2C
|
|
help
|
|
Support for 20/40/60 pin Cypress Cy8C95x0 pinctrl/gpio I2C expander.
|
|
This driver can also be built as a module. If so, the module will be
|
|
called pinctrl-cy8c95x0.
|
|
|
|
config PINCTRL_DA850_PUPD
|
|
tristate "TI DA850/OMAP-L138/AM18XX pull-up and pull-down groups"
|
|
depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
help
|
|
Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
|
|
pull-up and pull-down pin groups.
|
|
|
|
config PINCTRL_DA9062
|
|
tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support"
|
|
depends on MFD_DA9062
|
|
select GPIOLIB
|
|
help
|
|
The Dialog DA9062 PMIC provides multiple GPIOs that can be muxed for
|
|
different functions. This driver bundles a pinctrl driver to select the
|
|
function muxing and a GPIO driver to handle the GPIO when the GPIO
|
|
function is selected.
|
|
|
|
Say Y to enable pinctrl and GPIO support for the DA9062 PMIC.
|
|
|
|
config PINCTRL_DIGICOLOR
|
|
bool
|
|
depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
|
|
config PINCTRL_EQUILIBRIUM
|
|
tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC"
|
|
depends on OF && HAS_IOMEM
|
|
depends on X86 || COMPILE_TEST
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB
|
|
select GPIO_GENERIC
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
help
|
|
Equilibrium driver is a pinctrl and GPIO driver for Intel Lightning
|
|
Mountain network processor SoC that supports both the GPIO and pin
|
|
control frameworks. It provides interfaces to setup pin muxing, assign
|
|
desired pin functions, configure GPIO attributes for LGM SoC pins.
|
|
Pin muxing and pin config settings are retrieved from device tree.
|
|
|
|
config PINCTRL_GEMINI
|
|
bool
|
|
depends on ARCH_GEMINI
|
|
default ARCH_GEMINI
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select MFD_SYSCON
|
|
|
|
config PINCTRL_INGENIC
|
|
bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
|
|
default MACH_INGENIC
|
|
depends on OF
|
|
depends on MIPS || COMPILE_TEST
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select REGMAP_MMIO
|
|
|
|
config PINCTRL_K210
|
|
bool "Pinctrl driver for the Canaan Kendryte K210 SoC"
|
|
depends on RISCV && SOC_CANAAN && OF
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select REGMAP_MMIO
|
|
default SOC_CANAAN
|
|
help
|
|
Add support for the Canaan Kendryte K210 RISC-V SOC Field
|
|
Programmable IO Array (FPIOA) controller.
|
|
|
|
config PINCTRL_KEEMBAY
|
|
tristate "Pinctrl driver for Intel Keem Bay SoC"
|
|
depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
|
|
depends on HAS_IOMEM
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GPIO_GENERIC
|
|
help
|
|
This selects pin control driver for the Intel Keem Bay SoC.
|
|
It provides pin config functions such as pull-up, pull-down,
|
|
interrupt, drive strength, sec lock, Schmitt trigger, slew
|
|
rate control and direction control. This module will be
|
|
called as pinctrl-keembay.
|
|
|
|
config PINCTRL_LANTIQ
|
|
bool
|
|
depends on LANTIQ
|
|
select PINMUX
|
|
select PINCONF
|
|
|
|
config PINCTRL_FALCON
|
|
bool
|
|
depends on SOC_FALCON
|
|
depends on PINCTRL_LANTIQ
|
|
|
|
config PINCTRL_XWAY
|
|
bool
|
|
depends on SOC_TYPE_XWAY
|
|
depends on PINCTRL_LANTIQ
|
|
|
|
config PINCTRL_LPC18XX
|
|
bool "NXP LPC18XX/43XX SCU pinctrl driver"
|
|
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
|
|
default ARCH_LPC18XX
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
|
|
|
|
config PINCTRL_MAX77620
|
|
tristate "MAX77620/MAX20024 Pincontrol support"
|
|
depends on MFD_MAX77620 && OF
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Say Y here to enable Pin control support for Maxim MAX77620 PMIC.
|
|
This PMIC has 8 GPIO pins that work as GPIO as well as special
|
|
function in alternate mode. This driver also configure push-pull,
|
|
open drain, FPS slots etc.
|
|
|
|
config PINCTRL_MCP23S08_I2C
|
|
tristate
|
|
select REGMAP_I2C
|
|
|
|
config PINCTRL_MCP23S08_SPI
|
|
tristate
|
|
select REGMAP_SPI
|
|
|
|
config PINCTRL_MCP23S08
|
|
tristate "Microchip MCP23xxx I/O expander"
|
|
depends on SPI_MASTER || I2C
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select PINCTRL_MCP23S08_I2C if I2C
|
|
select PINCTRL_MCP23S08_SPI if SPI_MASTER
|
|
help
|
|
SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
|
|
MCP23008 / MCP23017 / MCP23018 I/O expanders.
|
|
This provides a GPIO interface supporting inputs and outputs and a
|
|
corresponding interrupt-controller.
|
|
|
|
config PINCTRL_MICROCHIP_SGPIO
|
|
tristate "Pinctrl driver for Microsemi/Microchip Serial GPIO"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select OF_GPIO
|
|
help
|
|
Support for the serial GPIO interface used on Microsemi and
|
|
Microchip SoCs. By using a serial interface, the SIO
|
|
controller significantly extends the number of available
|
|
GPIOs with a minimum number of additional pins on the
|
|
device. The primary purpose of the SIO controller is to
|
|
connect control signals from SFP modules and to act as an
|
|
LED controller.
|
|
|
|
If compiled as a module, the module name will be
|
|
pinctrl-microchip-sgpio.
|
|
|
|
config PINCTRL_OCELOT
|
|
tristate "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select OF_GPIO
|
|
select REGMAP_MMIO
|
|
help
|
|
Support for the internal GPIO interfaces on Microsemi Ocelot and
|
|
Jaguar2 SoCs.
|
|
|
|
If conpiled as a module, the module name will be pinctrl-ocelot.
|
|
|
|
config PINCTRL_OXNAS
|
|
bool
|
|
depends on OF
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select GPIOLIB_IRQCHIP
|
|
select MFD_SYSCON
|
|
|
|
config PINCTRL_PALMAS
|
|
tristate "Pinctrl driver for the PALMAS Series MFD devices"
|
|
depends on OF && MFD_PALMAS
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Palmas device supports the configuration of pins for different
|
|
functionality. This driver supports the pinmux, push-pull and
|
|
open drain configuration for the Palmas series devices like
|
|
TPS65913, TPS80036 etc.
|
|
|
|
config PINCTRL_PIC32
|
|
bool "Microchip PIC32 pin controller driver"
|
|
depends on OF
|
|
depends on MACH_PIC32
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
This is the pin controller and gpio driver for Microchip PIC32
|
|
microcontrollers. This option is selected automatically when specific
|
|
machine and arch are selected to build.
|
|
|
|
config PINCTRL_PIC32MZDA
|
|
def_bool y if PIC32MZDA
|
|
select PINCTRL_PIC32
|
|
|
|
config PINCTRL_PISTACHIO
|
|
bool "IMG Pistachio SoC pinctrl driver"
|
|
depends on OF && (MIPS || COMPILE_TEST)
|
|
depends on GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
This support pinctrl and GPIO driver for IMG Pistachio SoC.
|
|
|
|
config PINCTRL_RK805
|
|
tristate "Pinctrl and GPIO driver for RK805 PMIC"
|
|
depends on MFD_RK808
|
|
select GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the pinctrl driver for RK805.
|
|
|
|
config PINCTRL_ROCKCHIP
|
|
tristate "Rockchip gpio and pinctrl driver"
|
|
depends on ARCH_ROCKCHIP || COMPILE_TEST
|
|
depends on OF
|
|
select GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GENERIC_IRQ_CHIP
|
|
select MFD_SYSCON
|
|
select OF_GPIO
|
|
default ARCH_ROCKCHIP
|
|
help
|
|
This support pinctrl and GPIO driver for Rockchip SoCs.
|
|
|
|
config PINCTRL_SINGLE
|
|
tristate "One-register-per-pin type device tree based pinctrl driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the device tree based generic pinctrl driver.
|
|
|
|
config PINCTRL_ST
|
|
bool
|
|
depends on OF
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
|
|
config PINCTRL_STMFX
|
|
tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
|
|
depends on I2C
|
|
depends on OF_GPIO
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select MFD_STMFX
|
|
help
|
|
Driver for STMicroelectronics Multi-Function eXpander (STMFX)
|
|
GPIO expander.
|
|
This provides a GPIO interface supporting inputs and outputs,
|
|
and configuring push-pull, open-drain, and can also be used as
|
|
interrupt-controller.
|
|
|
|
config PINCTRL_SX150X
|
|
bool "Semtech SX150x I2C GPIO expander pinctrl driver"
|
|
depends on I2C=y
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select REGMAP
|
|
help
|
|
Say Y here to provide support for Semtech SX150x-series I2C
|
|
GPIO expanders as pinctrl module.
|
|
Compatible models include:
|
|
- 8 bits: sx1508q, sx1502q
|
|
- 16 bits: sx1509q, sx1506q
|
|
|
|
config PINCTRL_TB10X
|
|
bool
|
|
depends on OF && ARC_PLAT_TB10X
|
|
select GPIOLIB
|
|
|
|
config PINCTRL_THUNDERBAY
|
|
tristate "Generic pinctrl and GPIO driver for Intel Thunder Bay SoC"
|
|
depends on ARCH_THUNDERBAY || (ARM64 && COMPILE_TEST)
|
|
depends on HAS_IOMEM
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GPIO_GENERIC
|
|
help
|
|
This selects pin control driver for the Intel Thunder Bay SoC.
|
|
It provides pin config functions such as pull-up, pull-down,
|
|
interrupt, drive strength, sec lock, Schmitt trigger, slew
|
|
rate control and direction control. This module will be
|
|
called as pinctrl-thunderbay.
|
|
|
|
config PINCTRL_ZYNQ
|
|
bool "Pinctrl driver for Xilinx Zynq"
|
|
depends on ARCH_ZYNQ
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the pinctrl driver for Xilinx Zynq.
|
|
|
|
config PINCTRL_ZYNQMP
|
|
tristate "Pinctrl driver for Xilinx ZynqMP"
|
|
depends on ZYNQMP_FIRMWARE
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
default ZYNQMP_FIRMWARE
|
|
help
|
|
This selects the pinctrl driver for Xilinx ZynqMP platform.
|
|
This driver will query the pin information from the firmware
|
|
and allow configuring the pins.
|
|
Configuration can include the mux function to select on those
|
|
pin(s)/group(s), and various pin configuration parameters
|
|
such as pull-up, slew rate, etc.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pinctrl-zynqmp.
|
|
|
|
source "drivers/pinctrl/actions/Kconfig"
|
|
source "drivers/pinctrl/aspeed/Kconfig"
|
|
source "drivers/pinctrl/bcm/Kconfig"
|
|
source "drivers/pinctrl/berlin/Kconfig"
|
|
source "drivers/pinctrl/cirrus/Kconfig"
|
|
source "drivers/pinctrl/freescale/Kconfig"
|
|
source "drivers/pinctrl/intel/Kconfig"
|
|
source "drivers/pinctrl/mediatek/Kconfig"
|
|
source "drivers/pinctrl/meson/Kconfig"
|
|
source "drivers/pinctrl/mvebu/Kconfig"
|
|
source "drivers/pinctrl/nomadik/Kconfig"
|
|
source "drivers/pinctrl/nuvoton/Kconfig"
|
|
source "drivers/pinctrl/pxa/Kconfig"
|
|
source "drivers/pinctrl/qcom/Kconfig"
|
|
source "drivers/pinctrl/ralink/Kconfig"
|
|
source "drivers/pinctrl/renesas/Kconfig"
|
|
source "drivers/pinctrl/samsung/Kconfig"
|
|
source "drivers/pinctrl/spear/Kconfig"
|
|
source "drivers/pinctrl/sprd/Kconfig"
|
|
source "drivers/pinctrl/starfive/Kconfig"
|
|
source "drivers/pinctrl/stm32/Kconfig"
|
|
source "drivers/pinctrl/sunplus/Kconfig"
|
|
source "drivers/pinctrl/sunxi/Kconfig"
|
|
source "drivers/pinctrl/tegra/Kconfig"
|
|
source "drivers/pinctrl/ti/Kconfig"
|
|
source "drivers/pinctrl/uniphier/Kconfig"
|
|
source "drivers/pinctrl/visconti/Kconfig"
|
|
source "drivers/pinctrl/vt8500/Kconfig"
|
|
|
|
endif
|