linux/arch/arm/mach-imx/ehci-imx25.c
Shawn Guo 50f2de6126 ARM: imx: include hardware.h rather than mach/hardware.h
It moves a bunch of header files included in hardware.h and itself
from mach-imx/include/mach to mach-imx, and updates users to include
hardware.h rather than mach/hardware.h.  The files in mach-imx/devices
will need to include "../hardware.h".

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-15 10:05:43 +08:00

99 lines
2.7 KiB
C

/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX25_OTG_SIC_SHIFT 29
#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
#define MX25_OTG_PM_BIT (1 << 24)
#define MX25_OTG_PP_BIT (1 << 11)
#define MX25_OTG_OCPOL_BIT (1 << 3)
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
#define MX25_H1_PP_BIT (1 << 18)
#define MX25_H1_PM_BIT (1 << 8)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
#define MX25_H1_USBTE_BIT (1 << 4)
#define MX25_H1_OCPOL_BIT (1 << 2)
int mx25_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
MX25_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX25_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX25_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX25_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX25_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}