linux/drivers/media/video/m5mols/m5mols_capture.c

/*
 * The Capture code for Fujitsu M-5MOLS ISP
 *
 * Copyright (C) 2011 Samsung Electronics Co., Ltd.
 * Author: HeungJun Kim <riverful.kim@samsung.com>
 *
 * Copyright (C) 2009 Samsung Electronics Co., Ltd.
 * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
#include <media/m5mols.h>

#include "m5mols.h"
#include "m5mols_reg.h"

static int m5mols_capture_error_handler(struct m5mols_info *info,
					int timeout)
{
	int ret;

	/* Disable all interrupts and clear relevant interrupt staus bits */
	ret = m5mols_write(&info->sd, SYSTEM_INT_ENABLE,
			   info->interrupt & ~(REG_INT_CAPTURE));
	if (ret)
		return ret;

	if (timeout == 0)
		return -ETIMEDOUT;

	return 0;
}
/**
 * m5mols_read_rational - I2C read of a rational number
 *
 * Read numerator and denominator from registers @addr_num and @addr_den
 * respectively and return the division result in @val.
 */
static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
				u32 addr_den, u32 *val)
{
	u32 num, den;

	int ret = m5mols_read_u32(sd, addr_num, &num);
	if (!ret)
		ret = m5mols_read_u32(sd, addr_den, &den);
	if (ret)
		return ret;
	*val = den == 0 ? 0 : num / den;
	return ret;
}

/**
 * m5mols_capture_info - Gather captured image information
 *
 * For now it gathers only EXIF information and file size.
 */
static int m5mols_capture_info(struct m5mols_info *info)
{
	struct m5mols_exif *exif = &info->cap.exif;
	struct v4l2_subdev *sd = &info->sd;
	int ret;

	ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU,
				   EXIF_INFO_EXPTIME_DE, &exif->exposure_time);
	if (ret)
		return ret;
	ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE,
				   &exif->shutter_speed);
	if (ret)
		return ret;
	ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE,
				   &exif->aperture);
	if (ret)
		return ret;
	ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE,
				   &exif->brightness);
	if (ret)
		return ret;
	ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE,
				   &exif->exposure_bias);
	if (ret)
		return ret;

	ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
	if (!ret)
		ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
	if (!ret)
		ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
	if (!ret)
		ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
	if (ret)
		return ret;

	if (!ret)
		ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
	if (!ret)
		ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
	if (!ret)
		info->cap.total = info->cap.main + info->cap.thumb;

	return ret;
}

int m5mols_start_capture(struct m5mols_info *info)
{
	struct v4l2_subdev *sd = &info->sd;
	u8 resolution = info->resolution;
	int timeout;
	int ret;

	/*
	 * Preparing capture. Setting control & interrupt before entering
	 * capture mode
	 *
	 * 1) change to MONITOR mode for operating control & interrupt
	 * 2) set controls (considering v4l2_control value & lock 3A)
	 * 3) set interrupt
	 * 4) change to CAPTURE mode
	 */
	ret = m5mols_mode(info, REG_MONITOR);
	if (!ret)
		ret = m5mols_sync_controls(info);
	if (!ret)
		ret = m5mols_lock_3a(info, true);
	if (!ret)
		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
	if (!ret)
		ret = m5mols_mode(info, REG_CAPTURE);
	if (!ret) {
		/* Wait for capture interrupt, after changing capture mode */
		timeout = wait_event_interruptible_timeout(info->irq_waitq,
					   test_bit(ST_CAPT_IRQ, &info->flags),
					   msecs_to_jiffies(2000));
		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags))
			ret = m5mols_capture_error_handler(info, timeout);
	}
	if (!ret)
		ret = m5mols_lock_3a(info, false);
	if (ret)
		return ret;
	/*
	 * Starting capture. Setting capture frame count and resolution and
	 * the format(available format: JPEG, Bayer RAW, YUV).
	 *
	 * 1) select single or multi(enable to 25), format, size
	 * 2) set interrupt
	 * 3) start capture(for main image, now)
	 * 4) get information
	 * 5) notify file size to v4l2 device(e.g, to s5p-fimc v4l2 device)
	 */
	ret = m5mols_write(sd, CAPC_SEL_FRAME, 1);
	if (!ret)
		ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
	if (!ret)
		ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution);
	if (!ret)
		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
	if (!ret)
		ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN);
	if (!ret) {
		/* Wait for the capture completion interrupt */
		timeout = wait_event_interruptible_timeout(info->irq_waitq,
					   test_bit(ST_CAPT_IRQ, &info->flags),
					   msecs_to_jiffies(2000));
		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) {
			ret = m5mols_capture_info(info);
			if (!ret)
				v4l2_subdev_notify(sd, 0, &info->cap.total);
		}
	}

	return m5mols_capture_error_handler(info, timeout);
}