korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-18 00:24:58 +08:00
Code Issues Packages Projects Releases Wiki Activity
ee8951e56c
linux/drivers/input/misc/pm8941-pwrkey.c
Stephen Boyd 0bec8b7e5c Input: remove dev_err() usage after platform_get_irq() 
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-14 10:49:01 -07:00

327 lines
7.8 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
* Copyright (c) 2014, Sony Mobile Communications Inc.
*/
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
#define PON_REV2 0x01
#define PON_RT_STS 0x10
#define PON_KPDPWR_N_SET BIT(0)
#define PON_RESIN_N_SET BIT(1)
#define PON_PS_HOLD_RST_CTL 0x5a
#define PON_PS_HOLD_RST_CTL2 0x5b
#define PON_PS_HOLD_ENABLE BIT(7)
#define PON_PS_HOLD_TYPE_MASK 0x0f
#define PON_PS_HOLD_TYPE_SHUTDOWN 4
#define PON_PS_HOLD_TYPE_HARD_RESET 7
#define PON_PULL_CTL 0x70
#define PON_KPDPWR_PULL_UP BIT(1)
#define PON_RESIN_PULL_UP BIT(0)
#define PON_DBC_CTL 0x71
#define PON_DBC_DELAY_MASK 0x7
struct pm8941_data {
unsigned int pull_up_bit;
unsigned int status_bit;
};
struct pm8941_pwrkey {
struct device *dev;
int irq;
u32 baseaddr;
struct regmap *regmap;
struct input_dev *input;
unsigned int revision;
struct notifier_block reboot_notifier;
u32 code;
const struct pm8941_data *data;
};
static int pm8941_reboot_notify(struct notifier_block *nb,
unsigned long code, void *unused)
{
struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
reboot_notifier);
unsigned int enable_reg;
unsigned int reset_type;
int error;
/* PMICs with revision 0 have the enable bit in same register as ctrl */
if (pwrkey->revision == 0)
enable_reg = PON_PS_HOLD_RST_CTL;
else
enable_reg = PON_PS_HOLD_RST_CTL2;
error = regmap_update_bits(pwrkey->regmap,
pwrkey->baseaddr + enable_reg,
PON_PS_HOLD_ENABLE,
0);
if (error)
dev_err(pwrkey->dev,
"unable to clear ps hold reset enable: %d\n",
error);
/*
* Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
* writes.
*/
usleep_range(100, 1000);
switch (code) {
case SYS_HALT:
case SYS_POWER_OFF:
reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
break;
case SYS_RESTART:
default:
reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
break;
}
error = regmap_update_bits(pwrkey->regmap,
pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
PON_PS_HOLD_TYPE_MASK,
reset_type);
if (error)
dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
error);
error = regmap_update_bits(pwrkey->regmap,
pwrkey->baseaddr + enable_reg,
PON_PS_HOLD_ENABLE,
PON_PS_HOLD_ENABLE);
if (error)
dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
return NOTIFY_DONE;
}
static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
{
struct pm8941_pwrkey *pwrkey = _data;
unsigned int sts;
int error;
error = regmap_read(pwrkey->regmap,
pwrkey->baseaddr + PON_RT_STS, &sts);
if (error)
return IRQ_HANDLED;
input_report_key(pwrkey->input, pwrkey->code,
sts & pwrkey->data->status_bit);
input_sync(pwrkey->input);
return IRQ_HANDLED;
}
static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
{
struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
enable_irq_wake(pwrkey->irq);
return 0;
}
static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
{
struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
disable_irq_wake(pwrkey->irq);
return 0;
}
static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
static int pm8941_pwrkey_probe(struct platform_device *pdev)
{
struct pm8941_pwrkey *pwrkey;
bool pull_up;
struct device *parent;
u32 req_delay;
int error;
if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
req_delay = 15625;
if (req_delay > 2000000 || req_delay == 0) {
dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
return -EINVAL;
}
pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
if (!pwrkey)
return -ENOMEM;
pwrkey->dev = &pdev->dev;
pwrkey->data = of_device_get_match_data(&pdev->dev);
parent = pdev->dev.parent;
pwrkey->regmap = dev_get_regmap(parent, NULL);
if (!pwrkey->regmap) {
/*
* We failed to get regmap for parent. Let's see if we are
* a child of pon node and read regmap and reg from its
* parent.
*/
pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
if (!pwrkey->regmap) {
dev_err(&pdev->dev, "failed to locate regmap\n");
return -ENODEV;
}
error = of_property_read_u32(parent->of_node,
"reg", &pwrkey->baseaddr);
} else {
error = of_property_read_u32(pdev->dev.of_node, "reg",
&pwrkey->baseaddr);
}
if (error)
return error;
pwrkey->irq = platform_get_irq(pdev, 0);
if (pwrkey->irq < 0)
return pwrkey->irq;
error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
&pwrkey->revision);
if (error) {
dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
return error;
}
error = of_property_read_u32(pdev->dev.of_node, "linux,code",
&pwrkey->code);
if (error) {
dev_dbg(&pdev->dev,
"no linux,code assuming power (%d)\n", error);
pwrkey->code = KEY_POWER;
}
pwrkey->input = devm_input_allocate_device(&pdev->dev);
if (!pwrkey->input) {
dev_dbg(&pdev->dev, "unable to allocate input device\n");
return -ENOMEM;
}
input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
pwrkey->input->name = "pm8941_pwrkey";
pwrkey->input->phys = "pm8941_pwrkey/input0";
req_delay = (req_delay << 6) / USEC_PER_SEC;
req_delay = ilog2(req_delay);
error = regmap_update_bits(pwrkey->regmap,
pwrkey->baseaddr + PON_DBC_CTL,
PON_DBC_DELAY_MASK,
req_delay);
if (error) {
dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
return error;
}
error = regmap_update_bits(pwrkey->regmap,
pwrkey->baseaddr + PON_PULL_CTL,
pwrkey->data->pull_up_bit,
pull_up ? pwrkey->data->pull_up_bit : 0);
if (error) {
dev_err(&pdev->dev, "failed to set pull: %d\n", error);
return error;
}
error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
NULL, pm8941_pwrkey_irq,
IRQF_ONESHOT,
"pm8941_pwrkey", pwrkey);
if (error) {
dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
return error;
}
error = input_register_device(pwrkey->input);
if (error) {
dev_err(&pdev->dev, "failed to register input device: %d\n",
error);
return error;
}
pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
error = register_reboot_notifier(&pwrkey->reboot_notifier);
if (error) {
dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
error);
return error;
}
platform_set_drvdata(pdev, pwrkey);
device_init_wakeup(&pdev->dev, 1);
return 0;
}
static int pm8941_pwrkey_remove(struct platform_device *pdev)
{
struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
unregister_reboot_notifier(&pwrkey->reboot_notifier);
return 0;
}
static const struct pm8941_data pwrkey_data = {
.pull_up_bit = PON_KPDPWR_PULL_UP,
.status_bit = PON_KPDPWR_N_SET,
};
static const struct pm8941_data resin_data = {
.pull_up_bit = PON_RESIN_PULL_UP,
.status_bit = PON_RESIN_N_SET,
};
static const struct of_device_id pm8941_pwr_key_id_table[] = {
{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
{ }
};
MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
static struct platform_driver pm8941_pwrkey_driver = {
.probe = pm8941_pwrkey_probe,
.remove = pm8941_pwrkey_remove,
.driver = {
.name = "pm8941-pwrkey",
.pm = &pm8941_pwr_key_pm_ops,
.of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
},
};
module_platform_driver(pm8941_pwrkey_driver);
MODULE_DESCRIPTION("PM8941 Power Key driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink