0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-24 03:24:55 +08:00
linux/drivers/clocksource/Kconfig
Linus Torvalds c0222ac086 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...
2014-12-11 17:56:37 -08:00

233 lines
5.5 KiB
Plaintext

menu "Clock Source drivers"
config CLKSRC_OF
bool
config CLKSRC_I8253
bool
config CLKEVT_I8253
bool
config I8253_LOCK
bool
config CLKBLD_I8253
def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
config CLKSRC_MMIO
bool
config DW_APB_TIMER
bool
config DW_APB_TIMER_OF
bool
select DW_APB_TIMER
select CLKSRC_OF
config ARMADA_370_XP_TIMER
bool
select CLKSRC_OF
config MESON6_TIMER
bool
select CLKSRC_MMIO
config ORION_TIMER
select CLKSRC_OF
select CLKSRC_MMIO
bool
config SUN4I_TIMER
select CLKSRC_MMIO
bool
config SUN5I_HSTIMER
select CLKSRC_MMIO
bool
config VT8500_TIMER
bool
config CADENCE_TTC_TIMER
bool
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
select CLKSRC_MMIO
help
Support for Multi Timer Unit. MTU provides access
to multiple interrupt generating programmable
32-bit free running decrementing counters.
config CLKSRC_NOMADIK_MTU_SCHED_CLOCK
bool
depends on CLKSRC_NOMADIK_MTU
help
Use the Multi Timer Unit as the sched_clock.
config CLKSRC_DBX500_PRCMU
bool "Clocksource PRCMU Timer"
depends on UX500_SOC_DB8500
default y
help
Use the always on PRCMU Timer as clocksource
config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
bool "Clocksource PRCMU Timer sched_clock"
depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK)
default y
help
Use the always on PRCMU Timer as sched_clock
config CLKSRC_EFM32
bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
select CLKSRC_MMIO
default ARCH_EFM32
help
Support to use the timers of EFM32 SoCs as clock source and clock
event device.
config ARM_ARCH_TIMER
bool
select CLKSRC_OF if OF
config ARM_ARCH_TIMER_EVTSTREAM
bool "Support for ARM architected timer event stream generation"
default y if ARM_ARCH_TIMER
depends on ARM_ARCH_TIMER
help
This option enables support for event stream generation based on
the ARM architected timer. It is used for waking up CPUs executing
the wfe instruction at a frequency represented as a power-of-2
divisor of the clock rate.
The main use of the event stream is wfe-based timeouts of userspace
locking implementations. It might also be useful for imposing timeout
on wfe to safeguard against any programming errors in case an expected
event is not generated.
This must be disabled for hardware validation purposes to detect any
hardware anomalies of missing events.
config ARM_GLOBAL_TIMER
bool
select CLKSRC_OF if OF
help
This options enables support for the ARM global timer unit
config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
bool
depends on ARM_GLOBAL_TIMER
default y
help
Use ARM global timer clock source as sched_clock
config ATMEL_PIT
select CLKSRC_OF if OF
def_bool SOC_AT91SAM9 || SOC_SAMA5
config CLKSRC_METAG_GENERIC
def_bool y if METAG
help
This option enables support for the Meta per-thread timers.
config CLKSRC_EXYNOS_MCT
def_bool y if ARCH_EXYNOS
depends on !ARM64
help
Support for Multi Core Timer controller on Exynos SoCs.
config CLKSRC_SAMSUNG_PWM
bool
help
This is a new clocksource driver for the PWM timer found in
Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
for all devicetree enabled platforms. This driver will be
needed only on systems that do not have the Exynos MCT available.
config FSL_FTM_TIMER
bool
help
Support for Freescale FlexTimer Module (FTM) timer.
config VF_PIT_TIMER
bool
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
config SYS_SUPPORTS_SH_CMT
bool
config MTK_TIMER
select CLKSRC_OF
select CLKSRC_MMIO
bool
config SYS_SUPPORTS_SH_MTU2
bool
config SYS_SUPPORTS_SH_TMU
bool
config SYS_SUPPORTS_EM_STI
bool
config SH_TIMER_CMT
bool "Renesas CMT timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
default SYS_SUPPORTS_SH_CMT
help
This enables build of a clocksource and clockevent driver for
the Compare Match Timer (CMT) hardware available in 16/32/48-bit
variants on a wide range of Mobile and Automotive SoCs from Renesas.
config SH_TIMER_MTU2
bool "Renesas MTU2 timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
default SYS_SUPPORTS_SH_MTU2
help
This enables build of a clockevent driver for the Multi-Function
Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
This hardware comes with 16 bit-timer registers.
config SH_TIMER_TMU
bool "Renesas TMU timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
default SYS_SUPPORTS_SH_TMU
help
This enables build of a clocksource and clockevent driver for
the 32-bit Timer Unit (TMU) hardware available on a wide range
SoCs from Renesas.
config EM_TIMER_STI
bool "Renesas STI timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS && HAS_IOMEM
default SYS_SUPPORTS_EM_STI
help
This enables build of a clocksource and clockevent driver for
the 48-bit System Timer (STI) hardware available on a SoCs
such as EMEV2 from former NEC Electronics.
config CLKSRC_QCOM
bool
config CLKSRC_VERSATILE
bool "ARM Versatile (Express) reference platforms clock source"
depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
select CLKSRC_OF
default y if MFD_VEXPRESS_SYSREG
help
This option enables clock source based on free running
counter available in the "System Registers" block of
ARM Versatile, RealView and Versatile Express reference
platforms.
config CLKSRC_MIPS_GIC
bool
depends on MIPS_GIC
select CLKSRC_OF
endmenu