mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-11 21:14:07 +08:00
c072c24975
Impact: extend documentation with notice of using wild cards correctly We know that we can use wild cards to set set_ftrace_filter, but there's problem when using them naively such as: echo h* > /debug/tracing/set_ftrace_filter If there are files named with "h" prefix in current directory, echo "h*" will echo these filenames to set_ftrace_filter, not the intended "h*". For example: $ cat /debug/tracing/available_filter_functions |grep ^hr |wc -l 23 $ ls $ touch hraa hrdd $ ls hraa hrdd $ echo hr* > /debug/tracing/set_ftrace_filter $ cat /debug/tracing/set_ftrace_filter No output in /debug/tracing/set_ftrace_filter! If we use '' to escape wild cards, it works: $ ls hraa hrdd $ echo "hr*" > /debug/tracing/set_ftrace_filter $ cat /debug/tracing/set_ftrace_filter |wc -l 23 This problem can lead to unexpected result if current directory has a lot of files. Signed-off-by: walimis <walimisdev@gmail.com> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
1425 lines
54 KiB
Plaintext
1425 lines
54 KiB
Plaintext
ftrace - Function Tracer
|
|
========================
|
|
|
|
Copyright 2008 Red Hat Inc.
|
|
Author: Steven Rostedt <srostedt@redhat.com>
|
|
License: The GNU Free Documentation License, Version 1.2
|
|
(dual licensed under the GPL v2)
|
|
Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton,
|
|
John Kacur, and David Teigland.
|
|
|
|
Written for: 2.6.28-rc2
|
|
|
|
Introduction
|
|
------------
|
|
|
|
Ftrace is an internal tracer designed to help out developers and
|
|
designers of systems to find what is going on inside the kernel.
|
|
It can be used for debugging or analyzing latencies and performance
|
|
issues that take place outside of user-space.
|
|
|
|
Although ftrace is the function tracer, it also includes an
|
|
infrastructure that allows for other types of tracing. Some of the
|
|
tracers that are currently in ftrace include a tracer to trace
|
|
context switches, the time it takes for a high priority task to
|
|
run after it was woken up, the time interrupts are disabled, and
|
|
more (ftrace allows for tracer plugins, which means that the list of
|
|
tracers can always grow).
|
|
|
|
|
|
The File System
|
|
---------------
|
|
|
|
Ftrace uses the debugfs file system to hold the control files as well
|
|
as the files to display output.
|
|
|
|
To mount the debugfs system:
|
|
|
|
# mkdir /debug
|
|
# mount -t debugfs nodev /debug
|
|
|
|
(Note: it is more common to mount at /sys/kernel/debug, but for simplicity
|
|
this document will use /debug)
|
|
|
|
That's it! (assuming that you have ftrace configured into your kernel)
|
|
|
|
After mounting the debugfs, you can see a directory called
|
|
"tracing". This directory contains the control and output files
|
|
of ftrace. Here is a list of some of the key files:
|
|
|
|
|
|
Note: all time values are in microseconds.
|
|
|
|
current_tracer: This is used to set or display the current tracer
|
|
that is configured.
|
|
|
|
available_tracers: This holds the different types of tracers that
|
|
have been compiled into the kernel. The tracers
|
|
listed here can be configured by echoing their name
|
|
into current_tracer.
|
|
|
|
tracing_enabled: This sets or displays whether the current_tracer
|
|
is activated and tracing or not. Echo 0 into this
|
|
file to disable the tracer or 1 to enable it.
|
|
|
|
trace: This file holds the output of the trace in a human readable
|
|
format (described below).
|
|
|
|
latency_trace: This file shows the same trace but the information
|
|
is organized more to display possible latencies
|
|
in the system (described below).
|
|
|
|
trace_pipe: The output is the same as the "trace" file but this
|
|
file is meant to be streamed with live tracing.
|
|
Reads from this file will block until new data
|
|
is retrieved. Unlike the "trace" and "latency_trace"
|
|
files, this file is a consumer. This means reading
|
|
from this file causes sequential reads to display
|
|
more current data. Once data is read from this
|
|
file, it is consumed, and will not be read
|
|
again with a sequential read. The "trace" and
|
|
"latency_trace" files are static, and if the
|
|
tracer is not adding more data, they will display
|
|
the same information every time they are read.
|
|
|
|
trace_options: This file lets the user control the amount of data
|
|
that is displayed in one of the above output
|
|
files.
|
|
|
|
trace_max_latency: Some of the tracers record the max latency.
|
|
For example, the time interrupts are disabled.
|
|
This time is saved in this file. The max trace
|
|
will also be stored, and displayed by either
|
|
"trace" or "latency_trace". A new max trace will
|
|
only be recorded if the latency is greater than
|
|
the value in this file. (in microseconds)
|
|
|
|
buffer_size_kb: This sets or displays the number of kilobytes each CPU
|
|
buffer can hold. The tracer buffers are the same size
|
|
for each CPU. The displayed number is the size of the
|
|
CPU buffer and not total size of all buffers. The
|
|
trace buffers are allocated in pages (blocks of memory
|
|
that the kernel uses for allocation, usually 4 KB in size).
|
|
If the last page allocated has room for more bytes
|
|
than requested, the rest of the page will be used,
|
|
making the actual allocation bigger than requested.
|
|
(Note, the size may not be a multiple of the page size due
|
|
to buffer managment overhead.)
|
|
|
|
This can only be updated when the current_tracer
|
|
is set to "nop".
|
|
|
|
tracing_cpumask: This is a mask that lets the user only trace
|
|
on specified CPUS. The format is a hex string
|
|
representing the CPUS.
|
|
|
|
set_ftrace_filter: When dynamic ftrace is configured in (see the
|
|
section below "dynamic ftrace"), the code is dynamically
|
|
modified (code text rewrite) to disable calling of the
|
|
function profiler (mcount). This lets tracing be configured
|
|
in with practically no overhead in performance. This also
|
|
has a side effect of enabling or disabling specific functions
|
|
to be traced. Echoing names of functions into this file
|
|
will limit the trace to only those functions.
|
|
|
|
set_ftrace_notrace: This has an effect opposite to that of
|
|
set_ftrace_filter. Any function that is added here will not
|
|
be traced. If a function exists in both set_ftrace_filter
|
|
and set_ftrace_notrace, the function will _not_ be traced.
|
|
|
|
set_ftrace_pid: Have the function tracer only trace a single thread.
|
|
|
|
available_filter_functions: This lists the functions that ftrace
|
|
has processed and can trace. These are the function
|
|
names that you can pass to "set_ftrace_filter" or
|
|
"set_ftrace_notrace". (See the section "dynamic ftrace"
|
|
below for more details.)
|
|
|
|
|
|
The Tracers
|
|
-----------
|
|
|
|
Here is the list of current tracers that may be configured.
|
|
|
|
function - function tracer that uses mcount to trace all functions.
|
|
|
|
sched_switch - traces the context switches between tasks.
|
|
|
|
irqsoff - traces the areas that disable interrupts and saves
|
|
the trace with the longest max latency.
|
|
See tracing_max_latency. When a new max is recorded,
|
|
it replaces the old trace. It is best to view this
|
|
trace via the latency_trace file.
|
|
|
|
preemptoff - Similar to irqsoff but traces and records the amount of
|
|
time for which preemption is disabled.
|
|
|
|
preemptirqsoff - Similar to irqsoff and preemptoff, but traces and
|
|
records the largest time for which irqs and/or preemption
|
|
is disabled.
|
|
|
|
wakeup - Traces and records the max latency that it takes for
|
|
the highest priority task to get scheduled after
|
|
it has been woken up.
|
|
|
|
nop - This is not a tracer. To remove all tracers from tracing
|
|
simply echo "nop" into current_tracer.
|
|
|
|
|
|
Examples of using the tracer
|
|
----------------------------
|
|
|
|
Here are typical examples of using the tracers when controlling them only
|
|
with the debugfs interface (without using any user-land utilities).
|
|
|
|
Output format:
|
|
--------------
|
|
|
|
Here is an example of the output format of the file "trace"
|
|
|
|
--------
|
|
# tracer: function
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
bash-4251 [01] 10152.583854: path_put <-path_walk
|
|
bash-4251 [01] 10152.583855: dput <-path_put
|
|
bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput
|
|
--------
|
|
|
|
A header is printed with the tracer name that is represented by the trace.
|
|
In this case the tracer is "function". Then a header showing the format. Task
|
|
name "bash", the task PID "4251", the CPU that it was running on
|
|
"01", the timestamp in <secs>.<usecs> format, the function name that was
|
|
traced "path_put" and the parent function that called this function
|
|
"path_walk". The timestamp is the time at which the function was
|
|
entered.
|
|
|
|
The sched_switch tracer also includes tracing of task wakeups and
|
|
context switches.
|
|
|
|
ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S
|
|
ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S
|
|
ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R
|
|
events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R
|
|
kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R
|
|
ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R
|
|
|
|
Wake ups are represented by a "+" and the context switches are shown as
|
|
"==>". The format is:
|
|
|
|
Context switches:
|
|
|
|
Previous task Next Task
|
|
|
|
<pid>:<prio>:<state> ==> <pid>:<prio>:<state>
|
|
|
|
Wake ups:
|
|
|
|
Current task Task waking up
|
|
|
|
<pid>:<prio>:<state> + <pid>:<prio>:<state>
|
|
|
|
The prio is the internal kernel priority, which is the inverse of the
|
|
priority that is usually displayed by user-space tools. Zero represents
|
|
the highest priority (99). Prio 100 starts the "nice" priorities with
|
|
100 being equal to nice -20 and 139 being nice 19. The prio "140" is
|
|
reserved for the idle task which is the lowest priority thread (pid 0).
|
|
|
|
|
|
Latency trace format
|
|
--------------------
|
|
|
|
For traces that display latency times, the latency_trace file gives
|
|
somewhat more information to see why a latency happened. Here is a typical
|
|
trace.
|
|
|
|
# tracer: irqsoff
|
|
#
|
|
irqsoff latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
|
|
-----------------
|
|
=> started at: apic_timer_interrupt
|
|
=> ended at: do_softirq
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
<idle>-0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt)
|
|
<idle>-0 0d.s. 97us : __do_softirq (do_softirq)
|
|
<idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq)
|
|
|
|
|
|
|
|
This shows that the current tracer is "irqsoff" tracing the time for which
|
|
interrupts were disabled. It gives the trace version and the version
|
|
of the kernel upon which this was executed on (2.6.26-rc8). Then it displays
|
|
the max latency in microsecs (97 us). The number of trace entries displayed
|
|
and the total number recorded (both are three: #3/3). The type of
|
|
preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero
|
|
and are reserved for later use. #P is the number of online CPUS (#P:2).
|
|
|
|
The task is the process that was running when the latency occurred.
|
|
(swapper pid: 0).
|
|
|
|
The start and stop (the functions in which the interrupts were disabled and
|
|
enabled respectively) that caused the latencies:
|
|
|
|
apic_timer_interrupt is where the interrupts were disabled.
|
|
do_softirq is where they were enabled again.
|
|
|
|
The next lines after the header are the trace itself. The header
|
|
explains which is which.
|
|
|
|
cmd: The name of the process in the trace.
|
|
|
|
pid: The PID of that process.
|
|
|
|
CPU#: The CPU which the process was running on.
|
|
|
|
irqs-off: 'd' interrupts are disabled. '.' otherwise.
|
|
Note: If the architecture does not support a way to
|
|
read the irq flags variable, an 'X' will always
|
|
be printed here.
|
|
|
|
need-resched: 'N' task need_resched is set, '.' otherwise.
|
|
|
|
hardirq/softirq:
|
|
'H' - hard irq occurred inside a softirq.
|
|
'h' - hard irq is running
|
|
's' - soft irq is running
|
|
'.' - normal context.
|
|
|
|
preempt-depth: The level of preempt_disabled
|
|
|
|
The above is mostly meaningful for kernel developers.
|
|
|
|
time: This differs from the trace file output. The trace file output
|
|
includes an absolute timestamp. The timestamp used by the
|
|
latency_trace file is relative to the start of the trace.
|
|
|
|
delay: This is just to help catch your eye a bit better. And
|
|
needs to be fixed to be only relative to the same CPU.
|
|
The marks are determined by the difference between this
|
|
current trace and the next trace.
|
|
'!' - greater than preempt_mark_thresh (default 100)
|
|
'+' - greater than 1 microsecond
|
|
' ' - less than or equal to 1 microsecond.
|
|
|
|
The rest is the same as the 'trace' file.
|
|
|
|
|
|
trace_options
|
|
-------------
|
|
|
|
The trace_options file is used to control what gets printed in the trace
|
|
output. To see what is available, simply cat the file:
|
|
|
|
cat /debug/tracing/trace_options
|
|
print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
|
|
noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
|
|
|
|
To disable one of the options, echo in the option prepended with "no".
|
|
|
|
echo noprint-parent > /debug/tracing/trace_options
|
|
|
|
To enable an option, leave off the "no".
|
|
|
|
echo sym-offset > /debug/tracing/trace_options
|
|
|
|
Here are the available options:
|
|
|
|
print-parent - On function traces, display the calling function
|
|
as well as the function being traced.
|
|
|
|
print-parent:
|
|
bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul
|
|
|
|
noprint-parent:
|
|
bash-4000 [01] 1477.606694: simple_strtoul
|
|
|
|
|
|
sym-offset - Display not only the function name, but also the offset
|
|
in the function. For example, instead of seeing just
|
|
"ktime_get", you will see "ktime_get+0xb/0x20".
|
|
|
|
sym-offset:
|
|
bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0
|
|
|
|
sym-addr - this will also display the function address as well as
|
|
the function name.
|
|
|
|
sym-addr:
|
|
bash-4000 [01] 1477.606694: simple_strtoul <c0339346>
|
|
|
|
verbose - This deals with the latency_trace file.
|
|
|
|
bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
|
|
(+0.000ms): simple_strtoul (strict_strtoul)
|
|
|
|
raw - This will display raw numbers. This option is best for use with
|
|
user applications that can translate the raw numbers better than
|
|
having it done in the kernel.
|
|
|
|
hex - Similar to raw, but the numbers will be in a hexadecimal format.
|
|
|
|
bin - This will print out the formats in raw binary.
|
|
|
|
block - TBD (needs update)
|
|
|
|
stacktrace - This is one of the options that changes the trace itself.
|
|
When a trace is recorded, so is the stack of functions.
|
|
This allows for back traces of trace sites.
|
|
|
|
userstacktrace - This option changes the trace.
|
|
It records a stacktrace of the current userspace thread.
|
|
|
|
sym-userobj - when user stacktrace are enabled, look up which object the
|
|
address belongs to, and print a relative address
|
|
This is especially useful when ASLR is on, otherwise you don't
|
|
get a chance to resolve the address to object/file/line after the app is no
|
|
longer running
|
|
|
|
The lookup is performed when you read trace,trace_pipe,latency_trace. Example:
|
|
|
|
a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0
|
|
x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
|
|
|
|
sched-tree - TBD (any users??)
|
|
|
|
|
|
sched_switch
|
|
------------
|
|
|
|
This tracer simply records schedule switches. Here is an example
|
|
of how to use it.
|
|
|
|
# echo sched_switch > /debug/tracing/current_tracer
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# sleep 1
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/trace
|
|
|
|
# tracer: sched_switch
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R
|
|
bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R
|
|
sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R
|
|
bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S
|
|
bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R
|
|
sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R
|
|
bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D
|
|
bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R
|
|
<idle>-0 [00] 240.132589: 0:140:R + 4:115:S
|
|
<idle>-0 [00] 240.132591: 0:140:R ==> 4:115:R
|
|
ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R
|
|
<idle>-0 [00] 240.132598: 0:140:R + 4:115:S
|
|
<idle>-0 [00] 240.132599: 0:140:R ==> 4:115:R
|
|
ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R
|
|
sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R
|
|
[...]
|
|
|
|
|
|
As we have discussed previously about this format, the header shows
|
|
the name of the trace and points to the options. The "FUNCTION"
|
|
is a misnomer since here it represents the wake ups and context
|
|
switches.
|
|
|
|
The sched_switch file only lists the wake ups (represented with '+')
|
|
and context switches ('==>') with the previous task or current task
|
|
first followed by the next task or task waking up. The format for both
|
|
of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO
|
|
is the inverse of the actual priority with zero (0) being the highest
|
|
priority and the nice values starting at 100 (nice -20). Below is
|
|
a quick chart to map the kernel priority to user land priorities.
|
|
|
|
Kernel priority: 0 to 99 ==> user RT priority 99 to 0
|
|
Kernel priority: 100 to 139 ==> user nice -20 to 19
|
|
Kernel priority: 140 ==> idle task priority
|
|
|
|
The task states are:
|
|
|
|
R - running : wants to run, may not actually be running
|
|
S - sleep : process is waiting to be woken up (handles signals)
|
|
D - disk sleep (uninterruptible sleep) : process must be woken up
|
|
(ignores signals)
|
|
T - stopped : process suspended
|
|
t - traced : process is being traced (with something like gdb)
|
|
Z - zombie : process waiting to be cleaned up
|
|
X - unknown
|
|
|
|
|
|
ftrace_enabled
|
|
--------------
|
|
|
|
The following tracers (listed below) give different output depending
|
|
on whether or not the sysctl ftrace_enabled is set. To set ftrace_enabled,
|
|
one can either use the sysctl function or set it via the proc
|
|
file system interface.
|
|
|
|
sysctl kernel.ftrace_enabled=1
|
|
|
|
or
|
|
|
|
echo 1 > /proc/sys/kernel/ftrace_enabled
|
|
|
|
To disable ftrace_enabled simply replace the '1' with '0' in
|
|
the above commands.
|
|
|
|
When ftrace_enabled is set the tracers will also record the functions
|
|
that are within the trace. The descriptions of the tracers
|
|
will also show an example with ftrace enabled.
|
|
|
|
|
|
irqsoff
|
|
-------
|
|
|
|
When interrupts are disabled, the CPU can not react to any other
|
|
external event (besides NMIs and SMIs). This prevents the timer
|
|
interrupt from triggering or the mouse interrupt from letting the
|
|
kernel know of a new mouse event. The result is a latency with the
|
|
reaction time.
|
|
|
|
The irqsoff tracer tracks the time for which interrupts are disabled.
|
|
When a new maximum latency is hit, the tracer saves the trace leading up
|
|
to that latency point so that every time a new maximum is reached, the old
|
|
saved trace is discarded and the new trace is saved.
|
|
|
|
To reset the maximum, echo 0 into tracing_max_latency. Here is an
|
|
example:
|
|
|
|
# echo irqsoff > /debug/tracing/current_tracer
|
|
# echo 0 > /debug/tracing/tracing_max_latency
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# ls -ltr
|
|
[...]
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/latency_trace
|
|
# tracer: irqsoff
|
|
#
|
|
irqsoff latency trace v1.1.5 on 2.6.26
|
|
--------------------------------------------------------------------
|
|
latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0)
|
|
-----------------
|
|
=> started at: sys_setpgid
|
|
=> ended at: sys_setpgid
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
bash-3730 1d... 0us : _write_lock_irq (sys_setpgid)
|
|
bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid)
|
|
bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid)
|
|
|
|
|
|
Here we see that that we had a latency of 12 microsecs (which is
|
|
very good). The _write_lock_irq in sys_setpgid disabled interrupts.
|
|
The difference between the 12 and the displayed timestamp 14us occurred
|
|
because the clock was incremented between the time of recording the max
|
|
latency and the time of recording the function that had that latency.
|
|
|
|
Note the above example had ftrace_enabled not set. If we set the
|
|
ftrace_enabled, we get a much larger output:
|
|
|
|
# tracer: irqsoff
|
|
#
|
|
irqsoff latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0)
|
|
-----------------
|
|
=> started at: __alloc_pages_internal
|
|
=> ended at: __alloc_pages_internal
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal)
|
|
ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist)
|
|
ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk)
|
|
ls-4339 0d..1 4us : add_preempt_count (_spin_lock)
|
|
ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk)
|
|
ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue)
|
|
ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest)
|
|
ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk)
|
|
ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue)
|
|
ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest)
|
|
ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk)
|
|
ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue)
|
|
[...]
|
|
ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue)
|
|
ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest)
|
|
ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk)
|
|
ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue)
|
|
ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest)
|
|
ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk)
|
|
ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock)
|
|
ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal)
|
|
ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal)
|
|
|
|
|
|
|
|
Here we traced a 50 microsecond latency. But we also see all the
|
|
functions that were called during that time. Note that by enabling
|
|
function tracing, we incur an added overhead. This overhead may
|
|
extend the latency times. But nevertheless, this trace has provided
|
|
some very helpful debugging information.
|
|
|
|
|
|
preemptoff
|
|
----------
|
|
|
|
When preemption is disabled, we may be able to receive interrupts but
|
|
the task cannot be preempted and a higher priority task must wait
|
|
for preemption to be enabled again before it can preempt a lower
|
|
priority task.
|
|
|
|
The preemptoff tracer traces the places that disable preemption.
|
|
Like the irqsoff tracer, it records the maximum latency for which preemption
|
|
was disabled. The control of preemptoff tracer is much like the irqsoff
|
|
tracer.
|
|
|
|
# echo preemptoff > /debug/tracing/current_tracer
|
|
# echo 0 > /debug/tracing/tracing_max_latency
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# ls -ltr
|
|
[...]
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/latency_trace
|
|
# tracer: preemptoff
|
|
#
|
|
preemptoff latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
|
|
-----------------
|
|
=> started at: do_IRQ
|
|
=> ended at: __do_softirq
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
sshd-4261 0d.h. 0us+: irq_enter (do_IRQ)
|
|
sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq)
|
|
sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq)
|
|
|
|
|
|
This has some more changes. Preemption was disabled when an interrupt
|
|
came in (notice the 'h'), and was enabled while doing a softirq.
|
|
(notice the 's'). But we also see that interrupts have been disabled
|
|
when entering the preempt off section and leaving it (the 'd').
|
|
We do not know if interrupts were enabled in the mean time.
|
|
|
|
# tracer: preemptoff
|
|
#
|
|
preemptoff latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
|
|
-----------------
|
|
=> started at: remove_wait_queue
|
|
=> ended at: __do_softirq
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue)
|
|
sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue)
|
|
sshd-4261 0d..1 2us : do_IRQ (common_interrupt)
|
|
sshd-4261 0d..1 2us : irq_enter (do_IRQ)
|
|
sshd-4261 0d..1 2us : idle_cpu (irq_enter)
|
|
sshd-4261 0d..1 3us : add_preempt_count (irq_enter)
|
|
sshd-4261 0d.h1 3us : idle_cpu (irq_enter)
|
|
sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ)
|
|
[...]
|
|
sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock)
|
|
sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq)
|
|
sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq)
|
|
sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq)
|
|
sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock)
|
|
sshd-4261 0d.h1 14us : irq_exit (do_IRQ)
|
|
sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit)
|
|
sshd-4261 0d..2 15us : do_softirq (irq_exit)
|
|
sshd-4261 0d... 15us : __do_softirq (do_softirq)
|
|
sshd-4261 0d... 16us : __local_bh_disable (__do_softirq)
|
|
sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable)
|
|
sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable)
|
|
sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable)
|
|
sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable)
|
|
[...]
|
|
sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable)
|
|
sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable)
|
|
sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable)
|
|
sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable)
|
|
sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip)
|
|
sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip)
|
|
sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable)
|
|
sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable)
|
|
[...]
|
|
sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq)
|
|
sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq)
|
|
|
|
|
|
The above is an example of the preemptoff trace with ftrace_enabled
|
|
set. Here we see that interrupts were disabled the entire time.
|
|
The irq_enter code lets us know that we entered an interrupt 'h'.
|
|
Before that, the functions being traced still show that it is not
|
|
in an interrupt, but we can see from the functions themselves that
|
|
this is not the case.
|
|
|
|
Notice that __do_softirq when called does not have a preempt_count.
|
|
It may seem that we missed a preempt enabling. What really happened
|
|
is that the preempt count is held on the thread's stack and we
|
|
switched to the softirq stack (4K stacks in effect). The code
|
|
does not copy the preempt count, but because interrupts are disabled,
|
|
we do not need to worry about it. Having a tracer like this is good
|
|
for letting people know what really happens inside the kernel.
|
|
|
|
|
|
preemptirqsoff
|
|
--------------
|
|
|
|
Knowing the locations that have interrupts disabled or preemption
|
|
disabled for the longest times is helpful. But sometimes we would
|
|
like to know when either preemption and/or interrupts are disabled.
|
|
|
|
Consider the following code:
|
|
|
|
local_irq_disable();
|
|
call_function_with_irqs_off();
|
|
preempt_disable();
|
|
call_function_with_irqs_and_preemption_off();
|
|
local_irq_enable();
|
|
call_function_with_preemption_off();
|
|
preempt_enable();
|
|
|
|
The irqsoff tracer will record the total length of
|
|
call_function_with_irqs_off() and
|
|
call_function_with_irqs_and_preemption_off().
|
|
|
|
The preemptoff tracer will record the total length of
|
|
call_function_with_irqs_and_preemption_off() and
|
|
call_function_with_preemption_off().
|
|
|
|
But neither will trace the time that interrupts and/or preemption
|
|
is disabled. This total time is the time that we can not schedule.
|
|
To record this time, use the preemptirqsoff tracer.
|
|
|
|
Again, using this trace is much like the irqsoff and preemptoff tracers.
|
|
|
|
# echo preemptirqsoff > /debug/tracing/current_tracer
|
|
# echo 0 > /debug/tracing/tracing_max_latency
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# ls -ltr
|
|
[...]
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/latency_trace
|
|
# tracer: preemptirqsoff
|
|
#
|
|
preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0)
|
|
-----------------
|
|
=> started at: apic_timer_interrupt
|
|
=> ended at: __do_softirq
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt)
|
|
ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq)
|
|
ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq)
|
|
|
|
|
|
|
|
The trace_hardirqs_off_thunk is called from assembly on x86 when
|
|
interrupts are disabled in the assembly code. Without the function
|
|
tracing, we do not know if interrupts were enabled within the preemption
|
|
points. We do see that it started with preemption enabled.
|
|
|
|
Here is a trace with ftrace_enabled set:
|
|
|
|
|
|
# tracer: preemptirqsoff
|
|
#
|
|
preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
|
|
-----------------
|
|
=> started at: write_chan
|
|
=> ended at: __do_softirq
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
ls-4473 0.N.. 0us : preempt_schedule (write_chan)
|
|
ls-4473 0dN.1 1us : _spin_lock (schedule)
|
|
ls-4473 0dN.1 2us : add_preempt_count (_spin_lock)
|
|
ls-4473 0d..2 2us : put_prev_task_fair (schedule)
|
|
[...]
|
|
ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts)
|
|
ls-4473 0d..2 13us : __switch_to (schedule)
|
|
sshd-4261 0d..2 14us : finish_task_switch (schedule)
|
|
sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch)
|
|
sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave)
|
|
sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set)
|
|
sshd-4261 0d..2 16us : do_IRQ (common_interrupt)
|
|
sshd-4261 0d..2 17us : irq_enter (do_IRQ)
|
|
sshd-4261 0d..2 17us : idle_cpu (irq_enter)
|
|
sshd-4261 0d..2 18us : add_preempt_count (irq_enter)
|
|
sshd-4261 0d.h2 18us : idle_cpu (irq_enter)
|
|
sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ)
|
|
sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq)
|
|
sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock)
|
|
sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq)
|
|
sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock)
|
|
[...]
|
|
sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq)
|
|
sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock)
|
|
sshd-4261 0d.h2 29us : irq_exit (do_IRQ)
|
|
sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit)
|
|
sshd-4261 0d..3 30us : do_softirq (irq_exit)
|
|
sshd-4261 0d... 30us : __do_softirq (do_softirq)
|
|
sshd-4261 0d... 31us : __local_bh_disable (__do_softirq)
|
|
sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable)
|
|
sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable)
|
|
[...]
|
|
sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip)
|
|
sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip)
|
|
sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt)
|
|
sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt)
|
|
sshd-4261 0d.s3 45us : idle_cpu (irq_enter)
|
|
sshd-4261 0d.s3 46us : add_preempt_count (irq_enter)
|
|
sshd-4261 0d.H3 46us : idle_cpu (irq_enter)
|
|
sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt)
|
|
sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt)
|
|
[...]
|
|
sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt)
|
|
sshd-4261 0d.H3 82us : ktime_get (tick_program_event)
|
|
sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get)
|
|
sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts)
|
|
sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts)
|
|
sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event)
|
|
sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event)
|
|
sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt)
|
|
sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit)
|
|
sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit)
|
|
sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable)
|
|
[...]
|
|
sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action)
|
|
sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq)
|
|
sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq)
|
|
sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq)
|
|
sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable)
|
|
sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq)
|
|
sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq)
|
|
|
|
|
|
This is a very interesting trace. It started with the preemption of
|
|
the ls task. We see that the task had the "need_resched" bit set
|
|
via the 'N' in the trace. Interrupts were disabled before the spin_lock
|
|
at the beginning of the trace. We see that a schedule took place to run
|
|
sshd. When the interrupts were enabled, we took an interrupt.
|
|
On return from the interrupt handler, the softirq ran. We took another
|
|
interrupt while running the softirq as we see from the capital 'H'.
|
|
|
|
|
|
wakeup
|
|
------
|
|
|
|
In a Real-Time environment it is very important to know the wakeup
|
|
time it takes for the highest priority task that is woken up to the
|
|
time that it executes. This is also known as "schedule latency".
|
|
I stress the point that this is about RT tasks. It is also important
|
|
to know the scheduling latency of non-RT tasks, but the average
|
|
schedule latency is better for non-RT tasks. Tools like
|
|
LatencyTop are more appropriate for such measurements.
|
|
|
|
Real-Time environments are interested in the worst case latency.
|
|
That is the longest latency it takes for something to happen, and
|
|
not the average. We can have a very fast scheduler that may only
|
|
have a large latency once in a while, but that would not work well
|
|
with Real-Time tasks. The wakeup tracer was designed to record
|
|
the worst case wakeups of RT tasks. Non-RT tasks are not recorded
|
|
because the tracer only records one worst case and tracing non-RT
|
|
tasks that are unpredictable will overwrite the worst case latency
|
|
of RT tasks.
|
|
|
|
Since this tracer only deals with RT tasks, we will run this slightly
|
|
differently than we did with the previous tracers. Instead of performing
|
|
an 'ls', we will run 'sleep 1' under 'chrt' which changes the
|
|
priority of the task.
|
|
|
|
# echo wakeup > /debug/tracing/current_tracer
|
|
# echo 0 > /debug/tracing/tracing_max_latency
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# chrt -f 5 sleep 1
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/latency_trace
|
|
# tracer: wakeup
|
|
#
|
|
wakeup latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5)
|
|
-----------------
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
<idle>-0 1d.h4 0us+: try_to_wake_up (wake_up_process)
|
|
<idle>-0 1d..4 4us : schedule (cpu_idle)
|
|
|
|
|
|
|
|
Running this on an idle system, we see that it only took 4 microseconds
|
|
to perform the task switch. Note, since the trace marker in the
|
|
schedule is before the actual "switch", we stop the tracing when
|
|
the recorded task is about to schedule in. This may change if
|
|
we add a new marker at the end of the scheduler.
|
|
|
|
Notice that the recorded task is 'sleep' with the PID of 4901 and it
|
|
has an rt_prio of 5. This priority is user-space priority and not
|
|
the internal kernel priority. The policy is 1 for SCHED_FIFO and 2
|
|
for SCHED_RR.
|
|
|
|
Doing the same with chrt -r 5 and ftrace_enabled set.
|
|
|
|
# tracer: wakeup
|
|
#
|
|
wakeup latency trace v1.1.5 on 2.6.26-rc8
|
|
--------------------------------------------------------------------
|
|
latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
|
|
-----------------
|
|
| task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5)
|
|
-----------------
|
|
|
|
# _------=> CPU#
|
|
# / _-----=> irqs-off
|
|
# | / _----=> need-resched
|
|
# || / _---=> hardirq/softirq
|
|
# ||| / _--=> preempt-depth
|
|
# |||| /
|
|
# ||||| delay
|
|
# cmd pid ||||| time | caller
|
|
# \ / ||||| \ | /
|
|
ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process)
|
|
ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb)
|
|
ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up)
|
|
ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup)
|
|
ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr)
|
|
ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup)
|
|
ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up)
|
|
ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up)
|
|
[...]
|
|
ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt)
|
|
ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit)
|
|
ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit)
|
|
ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq)
|
|
[...]
|
|
ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks)
|
|
ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq)
|
|
ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable)
|
|
ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd)
|
|
ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd)
|
|
ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched)
|
|
ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched)
|
|
ksoftirq-7 1.N.2 33us : schedule (__cond_resched)
|
|
ksoftirq-7 1.N.2 33us : add_preempt_count (schedule)
|
|
ksoftirq-7 1.N.3 34us : hrtick_clear (schedule)
|
|
ksoftirq-7 1dN.3 35us : _spin_lock (schedule)
|
|
ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock)
|
|
ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule)
|
|
ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair)
|
|
[...]
|
|
ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline)
|
|
ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock)
|
|
ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline)
|
|
ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock)
|
|
ksoftirq-7 1d..4 50us : schedule (__cond_resched)
|
|
|
|
The interrupt went off while running ksoftirqd. This task runs at
|
|
SCHED_OTHER. Why did not we see the 'N' set early? This may be
|
|
a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks
|
|
configured, the interrupt and softirq run with their own stack.
|
|
Some information is held on the top of the task's stack (need_resched
|
|
and preempt_count are both stored there). The setting of the NEED_RESCHED
|
|
bit is done directly to the task's stack, but the reading of the
|
|
NEED_RESCHED is done by looking at the current stack, which in this case
|
|
is the stack for the hard interrupt. This hides the fact that NEED_RESCHED
|
|
has been set. We do not see the 'N' until we switch back to the task's
|
|
assigned stack.
|
|
|
|
function
|
|
--------
|
|
|
|
This tracer is the function tracer. Enabling the function tracer
|
|
can be done from the debug file system. Make sure the ftrace_enabled is
|
|
set; otherwise this tracer is a nop.
|
|
|
|
# sysctl kernel.ftrace_enabled=1
|
|
# echo function > /debug/tracing/current_tracer
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# usleep 1
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/trace
|
|
# tracer: function
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
bash-4003 [00] 123.638713: finish_task_switch <-schedule
|
|
bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch
|
|
bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq
|
|
bash-4003 [00] 123.638715: hrtick_set <-schedule
|
|
bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set
|
|
bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave
|
|
bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set
|
|
bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore
|
|
bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set
|
|
bash-4003 [00] 123.638718: sub_preempt_count <-schedule
|
|
bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule
|
|
bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run
|
|
bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion
|
|
bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common
|
|
bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq
|
|
[...]
|
|
|
|
|
|
Note: function tracer uses ring buffers to store the above entries.
|
|
The newest data may overwrite the oldest data. Sometimes using echo to
|
|
stop the trace is not sufficient because the tracing could have overwritten
|
|
the data that you wanted to record. For this reason, it is sometimes better to
|
|
disable tracing directly from a program. This allows you to stop the
|
|
tracing at the point that you hit the part that you are interested in.
|
|
To disable the tracing directly from a C program, something like following
|
|
code snippet can be used:
|
|
|
|
int trace_fd;
|
|
[...]
|
|
int main(int argc, char *argv[]) {
|
|
[...]
|
|
trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
|
|
[...]
|
|
if (condition_hit()) {
|
|
write(trace_fd, "0", 1);
|
|
}
|
|
[...]
|
|
}
|
|
|
|
Note: Here we hard coded the path name. The debugfs mount is not
|
|
guaranteed to be at /debug (and is more commonly at /sys/kernel/debug).
|
|
For simple one time traces, the above is sufficent. For anything else,
|
|
a search through /proc/mounts may be needed to find where the debugfs
|
|
file-system is mounted.
|
|
|
|
|
|
Single thread tracing
|
|
---------------------
|
|
|
|
By writing into /debug/tracing/set_ftrace_pid you can trace a
|
|
single thread. For example:
|
|
|
|
# cat /debug/tracing/set_ftrace_pid
|
|
no pid
|
|
# echo 3111 > /debug/tracing/set_ftrace_pid
|
|
# cat /debug/tracing/set_ftrace_pid
|
|
3111
|
|
# echo function > /debug/tracing/current_tracer
|
|
# cat /debug/tracing/trace | head
|
|
# tracer: function
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return
|
|
yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range
|
|
yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel
|
|
yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
|
|
yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll
|
|
yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll
|
|
# echo -1 > /debug/tracing/set_ftrace_pid
|
|
# cat /debug/tracing/trace |head
|
|
# tracer: function
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
##### CPU 3 buffer started ####
|
|
yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait
|
|
yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry
|
|
yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry
|
|
yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit
|
|
yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit
|
|
|
|
If you want to trace a function when executing, you could use
|
|
something like this simple program:
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <sys/types.h>
|
|
#include <sys/stat.h>
|
|
#include <fcntl.h>
|
|
#include <unistd.h>
|
|
|
|
int main (int argc, char **argv)
|
|
{
|
|
if (argc < 1)
|
|
exit(-1);
|
|
|
|
if (fork() > 0) {
|
|
int fd, ffd;
|
|
char line[64];
|
|
int s;
|
|
|
|
ffd = open("/debug/tracing/current_tracer", O_WRONLY);
|
|
if (ffd < 0)
|
|
exit(-1);
|
|
write(ffd, "nop", 3);
|
|
|
|
fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY);
|
|
s = sprintf(line, "%d\n", getpid());
|
|
write(fd, line, s);
|
|
|
|
write(ffd, "function", 8);
|
|
|
|
close(fd);
|
|
close(ffd);
|
|
|
|
execvp(argv[1], argv+1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
dynamic ftrace
|
|
--------------
|
|
|
|
If CONFIG_DYNAMIC_FTRACE is set, the system will run with
|
|
virtually no overhead when function tracing is disabled. The way
|
|
this works is the mcount function call (placed at the start of
|
|
every kernel function, produced by the -pg switch in gcc), starts
|
|
of pointing to a simple return. (Enabling FTRACE will include the
|
|
-pg switch in the compiling of the kernel.)
|
|
|
|
At compile time every C file object is run through the
|
|
recordmcount.pl script (located in the scripts directory). This
|
|
script will process the C object using objdump to find all the
|
|
locations in the .text section that call mcount. (Note, only
|
|
the .text section is processed, since processing other sections
|
|
like .init.text may cause races due to those sections being freed).
|
|
|
|
A new section called "__mcount_loc" is created that holds references
|
|
to all the mcount call sites in the .text section. This section is
|
|
compiled back into the original object. The final linker will add
|
|
all these references into a single table.
|
|
|
|
On boot up, before SMP is initialized, the dynamic ftrace code
|
|
scans this table and updates all the locations into nops. It also
|
|
records the locations, which are added to the available_filter_functions
|
|
list. Modules are processed as they are loaded and before they are
|
|
executed. When a module is unloaded, it also removes its functions from
|
|
the ftrace function list. This is automatic in the module unload
|
|
code, and the module author does not need to worry about it.
|
|
|
|
When tracing is enabled, kstop_machine is called to prevent races
|
|
with the CPUS executing code being modified (which can cause the
|
|
CPU to do undesireable things), and the nops are patched back
|
|
to calls. But this time, they do not call mcount (which is just
|
|
a function stub). They now call into the ftrace infrastructure.
|
|
|
|
One special side-effect to the recording of the functions being
|
|
traced is that we can now selectively choose which functions we
|
|
wish to trace and which ones we want the mcount calls to remain as
|
|
nops.
|
|
|
|
Two files are used, one for enabling and one for disabling the tracing
|
|
of specified functions. They are:
|
|
|
|
set_ftrace_filter
|
|
|
|
and
|
|
|
|
set_ftrace_notrace
|
|
|
|
A list of available functions that you can add to these files is listed
|
|
in:
|
|
|
|
available_filter_functions
|
|
|
|
# cat /debug/tracing/available_filter_functions
|
|
put_prev_task_idle
|
|
kmem_cache_create
|
|
pick_next_task_rt
|
|
get_online_cpus
|
|
pick_next_task_fair
|
|
mutex_lock
|
|
[...]
|
|
|
|
If I am only interested in sys_nanosleep and hrtimer_interrupt:
|
|
|
|
# echo sys_nanosleep hrtimer_interrupt \
|
|
> /debug/tracing/set_ftrace_filter
|
|
# echo ftrace > /debug/tracing/current_tracer
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# usleep 1
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/trace
|
|
# tracer: ftrace
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt
|
|
usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call
|
|
<idle>-0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt
|
|
|
|
To see which functions are being traced, you can cat the file:
|
|
|
|
# cat /debug/tracing/set_ftrace_filter
|
|
hrtimer_interrupt
|
|
sys_nanosleep
|
|
|
|
|
|
Perhaps this is not enough. The filters also allow simple wild cards.
|
|
Only the following are currently available
|
|
|
|
<match>* - will match functions that begin with <match>
|
|
*<match> - will match functions that end with <match>
|
|
*<match>* - will match functions that have <match> in it
|
|
|
|
These are the only wild cards which are supported.
|
|
|
|
<match>*<match> will not work.
|
|
|
|
Note: It is better to use quotes to enclose the wild cards, otherwise
|
|
the shell may expand the parameters into names of files in the local
|
|
directory.
|
|
|
|
# echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
|
|
|
|
Produces:
|
|
|
|
# tracer: ftrace
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
bash-4003 [00] 1480.611794: hrtimer_init <-copy_process
|
|
bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set
|
|
bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear
|
|
bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel
|
|
<idle>-0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt
|
|
<idle>-0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt
|
|
<idle>-0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt
|
|
<idle>-0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt
|
|
<idle>-0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt
|
|
|
|
|
|
Notice that we lost the sys_nanosleep.
|
|
|
|
# cat /debug/tracing/set_ftrace_filter
|
|
hrtimer_run_queues
|
|
hrtimer_run_pending
|
|
hrtimer_init
|
|
hrtimer_cancel
|
|
hrtimer_try_to_cancel
|
|
hrtimer_forward
|
|
hrtimer_start
|
|
hrtimer_reprogram
|
|
hrtimer_force_reprogram
|
|
hrtimer_get_next_event
|
|
hrtimer_interrupt
|
|
hrtimer_nanosleep
|
|
hrtimer_wakeup
|
|
hrtimer_get_remaining
|
|
hrtimer_get_res
|
|
hrtimer_init_sleeper
|
|
|
|
|
|
This is because the '>' and '>>' act just like they do in bash.
|
|
To rewrite the filters, use '>'
|
|
To append to the filters, use '>>'
|
|
|
|
To clear out a filter so that all functions will be recorded again:
|
|
|
|
# echo > /debug/tracing/set_ftrace_filter
|
|
# cat /debug/tracing/set_ftrace_filter
|
|
#
|
|
|
|
Again, now we want to append.
|
|
|
|
# echo sys_nanosleep > /debug/tracing/set_ftrace_filter
|
|
# cat /debug/tracing/set_ftrace_filter
|
|
sys_nanosleep
|
|
# echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter
|
|
# cat /debug/tracing/set_ftrace_filter
|
|
hrtimer_run_queues
|
|
hrtimer_run_pending
|
|
hrtimer_init
|
|
hrtimer_cancel
|
|
hrtimer_try_to_cancel
|
|
hrtimer_forward
|
|
hrtimer_start
|
|
hrtimer_reprogram
|
|
hrtimer_force_reprogram
|
|
hrtimer_get_next_event
|
|
hrtimer_interrupt
|
|
sys_nanosleep
|
|
hrtimer_nanosleep
|
|
hrtimer_wakeup
|
|
hrtimer_get_remaining
|
|
hrtimer_get_res
|
|
hrtimer_init_sleeper
|
|
|
|
|
|
The set_ftrace_notrace prevents those functions from being traced.
|
|
|
|
# echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
|
|
|
|
Produces:
|
|
|
|
# tracer: ftrace
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
bash-4043 [01] 115.281644: finish_task_switch <-schedule
|
|
bash-4043 [01] 115.281645: hrtick_set <-schedule
|
|
bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set
|
|
bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run
|
|
bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion
|
|
bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run
|
|
bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop
|
|
bash-4043 [01] 115.281648: wake_up_process <-kthread_stop
|
|
bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process
|
|
|
|
We can see that there's no more lock or preempt tracing.
|
|
|
|
trace_pipe
|
|
----------
|
|
|
|
The trace_pipe outputs the same content as the trace file, but the effect
|
|
on the tracing is different. Every read from trace_pipe is consumed.
|
|
This means that subsequent reads will be different. The trace
|
|
is live.
|
|
|
|
# echo function > /debug/tracing/current_tracer
|
|
# cat /debug/tracing/trace_pipe > /tmp/trace.out &
|
|
[1] 4153
|
|
# echo 1 > /debug/tracing/tracing_enabled
|
|
# usleep 1
|
|
# echo 0 > /debug/tracing/tracing_enabled
|
|
# cat /debug/tracing/trace
|
|
# tracer: function
|
|
#
|
|
# TASK-PID CPU# TIMESTAMP FUNCTION
|
|
# | | | | |
|
|
|
|
#
|
|
# cat /tmp/trace.out
|
|
bash-4043 [00] 41.267106: finish_task_switch <-schedule
|
|
bash-4043 [00] 41.267106: hrtick_set <-schedule
|
|
bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set
|
|
bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run
|
|
bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion
|
|
bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run
|
|
bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop
|
|
bash-4043 [00] 41.267110: wake_up_process <-kthread_stop
|
|
bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process
|
|
bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up
|
|
|
|
|
|
Note, reading the trace_pipe file will block until more input is added.
|
|
By changing the tracer, trace_pipe will issue an EOF. We needed
|
|
to set the function tracer _before_ we "cat" the trace_pipe file.
|
|
|
|
|
|
trace entries
|
|
-------------
|
|
|
|
Having too much or not enough data can be troublesome in diagnosing
|
|
an issue in the kernel. The file buffer_size_kb is used to modify
|
|
the size of the internal trace buffers. The number listed
|
|
is the number of entries that can be recorded per CPU. To know
|
|
the full size, multiply the number of possible CPUS with the
|
|
number of entries.
|
|
|
|
# cat /debug/tracing/buffer_size_kb
|
|
1408 (units kilobytes)
|
|
|
|
Note, to modify this, you must have tracing completely disabled. To do that,
|
|
echo "nop" into the current_tracer. If the current_tracer is not set
|
|
to "nop", an EINVAL error will be returned.
|
|
|
|
# echo nop > /debug/tracing/current_tracer
|
|
# echo 10000 > /debug/tracing/buffer_size_kb
|
|
# cat /debug/tracing/buffer_size_kb
|
|
10000 (units kilobytes)
|
|
|
|
The number of pages which will be allocated is limited to a percentage
|
|
of available memory. Allocating too much will produce an error.
|
|
|
|
# echo 1000000000000 > /debug/tracing/buffer_size_kb
|
|
-bash: echo: write error: Cannot allocate memory
|
|
# cat /debug/tracing/buffer_size_kb
|
|
85
|
|
|