mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 16:44:10 +08:00
6b5a12dbca
This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIUAwUAVqAGcmCrR//JCVInAQLDog/4x9F0PHGmZhexGfFOpi2Od63Jjx55izRU zRXqRjjFjambOrZuOx8lEGDy/qzqKbsDU8D1P4IUugkDr2bLSXv+NTLZL1kNBIdm YOlJhw/BmzLYqauOHmBzGhtv1FDUk3rqbgTsP5tTWj5LpSkwjmqui3HBZpi+f3Rr YOn+NeQSARiw+51D0b106a9RFshQXRGgn5m3xFjLWhJqshb2z2Ew5cogX/zdwrrM ss1BFomxsvgk6S+snN6v7cEX2iXe3r89qNR5jEW5BgNpQGFsAUeXPr9zzH07L/Qq O7XLw9jt5MX/X5372zVHPb57WoflLbF9cFaaDUZV3eTqt3lC67BTxOtYIdC2i90k E5GYlsy88CRwT2EO+ok/6UTryph+hVv7JqHfbKfnISrbraMCK36DtDTpBIpZ9uYF rRB7ncJZUWBcyoe+qvitSl+2KV54iB1ez2RXsketxM98dDZsfB2M2ImFou1F/Pgg ALvpifPubi/uDe7xNUsSuaT6/3jAomBuNsxnkYJ3NeiH/+duZbOYGkzK/LlcjZyc UrA0IpLfwIFsBNzwfpZPZ1lkEu8Y1YZZ+Hv9k65q1wMuBDgrFI5zUeYrPZi4pN9T Yo1xP9FstVLDouJrpGZo12VIIxR1UBeGqfRI/BZ58LEF3PRq/g2OVFsdQia5gZKr ddiJKSL1Vw== =z1AW -----END PGP SIGNATURE----- Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
377 lines
9.1 KiB
C
377 lines
9.1 KiB
C
/*
|
|
* Hardware definitions for PalmTX
|
|
*
|
|
* Author: Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on work of:
|
|
* Alex Osborne <ato@meshy.org>
|
|
* Cristiano P. <cristianop@users.sourceforge.net>
|
|
* Jan Herman <2hp@seznam.cz>
|
|
* Michal Hrusecky
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* (find more info at www.hackndev.com)
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/pda_power.h>
|
|
#include <linux/pwm_backlight.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/wm97xx.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/usb/gpio_vbus.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/physmap.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "pxa27x.h"
|
|
#include <mach/audio.h>
|
|
#include <mach/palmtx.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include <linux/platform_data/irda-pxaficp.h>
|
|
#include <linux/platform_data/keypad-pxa27x.h>
|
|
#include "udc.h"
|
|
#include <linux/platform_data/asoc-palm27x.h>
|
|
#include "palm27x.h"
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/******************************************************************************
|
|
* Pin configuration
|
|
******************************************************************************/
|
|
static unsigned long palmtx_pin_config[] __initdata = {
|
|
/* MMC */
|
|
GPIO32_MMC_CLK,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO112_MMC_CMD,
|
|
GPIO14_GPIO, /* SD detect */
|
|
GPIO114_GPIO, /* SD power */
|
|
GPIO115_GPIO, /* SD r/o switch */
|
|
|
|
/* AC97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO89_AC97_SYSCLK,
|
|
GPIO95_AC97_nRESET,
|
|
|
|
/* IrDA */
|
|
GPIO40_GPIO, /* ir disable */
|
|
GPIO46_FICP_RXD,
|
|
GPIO47_FICP_TXD,
|
|
|
|
/* PWM */
|
|
GPIO16_PWM0_OUT,
|
|
|
|
/* USB */
|
|
GPIO13_GPIO, /* usb detect */
|
|
GPIO93_GPIO, /* usb power */
|
|
|
|
/* PCMCIA */
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO85_nPCE_1,
|
|
GPIO54_nPCE_2,
|
|
GPIO79_PSKTSEL,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16,
|
|
GPIO94_GPIO, /* wifi power 1 */
|
|
GPIO108_GPIO, /* wifi power 2 */
|
|
GPIO116_GPIO, /* wifi ready */
|
|
|
|
/* MATRIX KEYPAD */
|
|
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO103_KP_MKOUT_0,
|
|
GPIO104_KP_MKOUT_1,
|
|
GPIO105_KP_MKOUT_2,
|
|
|
|
/* LCD */
|
|
GPIOxx_LCD_TFT_16BPP,
|
|
|
|
/* FFUART */
|
|
GPIO34_FFUART_RXD,
|
|
GPIO39_FFUART_TXD,
|
|
|
|
/* NAND */
|
|
GPIO15_nCS_1,
|
|
GPIO18_RDY,
|
|
|
|
/* MISC. */
|
|
GPIO10_GPIO, /* hotsync button */
|
|
GPIO12_GPIO, /* power detect */
|
|
GPIO107_GPIO, /* earphone detect */
|
|
};
|
|
|
|
/******************************************************************************
|
|
* NOR Flash
|
|
******************************************************************************/
|
|
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
|
|
static struct mtd_partition palmtx_partitions[] = {
|
|
{
|
|
.name = "Flash",
|
|
.offset = 0x00000000,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data palmtx_flash_data[] = {
|
|
{
|
|
.width = 2, /* bankwidth in bytes */
|
|
.parts = palmtx_partitions,
|
|
.nr_parts = ARRAY_SIZE(palmtx_partitions)
|
|
}
|
|
};
|
|
|
|
static struct resource palmtx_flash_resource = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_8M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device palmtx_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.resource = &palmtx_flash_resource,
|
|
.num_resources = 1,
|
|
.dev = {
|
|
.platform_data = palmtx_flash_data,
|
|
},
|
|
};
|
|
|
|
static void __init palmtx_nor_init(void)
|
|
{
|
|
platform_device_register(&palmtx_flash);
|
|
}
|
|
#else
|
|
static inline void palmtx_nor_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* GPIO keyboard
|
|
******************************************************************************/
|
|
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
|
static const unsigned int palmtx_matrix_keys[] = {
|
|
KEY(0, 0, KEY_POWER),
|
|
KEY(0, 1, KEY_F1),
|
|
KEY(0, 2, KEY_ENTER),
|
|
|
|
KEY(1, 0, KEY_F2),
|
|
KEY(1, 1, KEY_F3),
|
|
KEY(1, 2, KEY_F4),
|
|
|
|
KEY(2, 0, KEY_UP),
|
|
KEY(2, 2, KEY_DOWN),
|
|
|
|
KEY(3, 0, KEY_RIGHT),
|
|
KEY(3, 2, KEY_LEFT),
|
|
};
|
|
|
|
static struct matrix_keymap_data palmtx_matrix_keymap_data = {
|
|
.keymap = palmtx_matrix_keys,
|
|
.keymap_size = ARRAY_SIZE(palmtx_matrix_keys),
|
|
};
|
|
|
|
static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
|
|
.matrix_key_rows = 4,
|
|
.matrix_key_cols = 3,
|
|
.matrix_keymap_data = &palmtx_matrix_keymap_data,
|
|
|
|
.debounce_interval = 30,
|
|
};
|
|
|
|
static void __init palmtx_kpc_init(void)
|
|
{
|
|
pxa_set_keypad_info(&palmtx_keypad_platform_data);
|
|
}
|
|
#else
|
|
static inline void palmtx_kpc_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* GPIO keys
|
|
******************************************************************************/
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
static struct gpio_keys_button palmtx_pxa_buttons[] = {
|
|
{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
|
|
};
|
|
|
|
static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
|
|
.buttons = palmtx_pxa_buttons,
|
|
.nbuttons = ARRAY_SIZE(palmtx_pxa_buttons),
|
|
};
|
|
|
|
static struct platform_device palmtx_pxa_keys = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmtx_pxa_keys_data,
|
|
},
|
|
};
|
|
|
|
static void __init palmtx_keys_init(void)
|
|
{
|
|
platform_device_register(&palmtx_pxa_keys);
|
|
}
|
|
#else
|
|
static inline void palmtx_keys_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* NAND Flash
|
|
******************************************************************************/
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
|
|
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
char __iomem *nandaddr = this->IO_ADDR_W;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
writeb(cmd, PALMTX_NAND_CLE_VIRT);
|
|
else if (ctrl & NAND_ALE)
|
|
writeb(cmd, PALMTX_NAND_ALE_VIRT);
|
|
else
|
|
writeb(cmd, nandaddr);
|
|
}
|
|
|
|
static struct mtd_partition palmtx_partition_info[] = {
|
|
[0] = {
|
|
.name = "palmtx-0",
|
|
.offset = 0,
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
|
|
struct platform_nand_data palmtx_nand_platdata = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_offset = 0,
|
|
.nr_partitions = ARRAY_SIZE(palmtx_partition_info),
|
|
.partitions = palmtx_partition_info,
|
|
.chip_delay = 20,
|
|
},
|
|
.ctrl = {
|
|
.cmd_ctrl = palmtx_nand_cmd_ctl,
|
|
},
|
|
};
|
|
|
|
static struct resource palmtx_nand_resource[] = {
|
|
[0] = {
|
|
.start = PXA_CS1_PHYS,
|
|
.end = PXA_CS1_PHYS + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device palmtx_nand = {
|
|
.name = "gen_nand",
|
|
.num_resources = ARRAY_SIZE(palmtx_nand_resource),
|
|
.resource = palmtx_nand_resource,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmtx_nand_platdata,
|
|
}
|
|
};
|
|
|
|
static void __init palmtx_nand_init(void)
|
|
{
|
|
platform_device_register(&palmtx_nand);
|
|
}
|
|
#else
|
|
static inline void palmtx_nand_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* Machine init
|
|
******************************************************************************/
|
|
static struct map_desc palmtx_io_desc[] __initdata = {
|
|
{
|
|
.virtual = (unsigned long)PALMTX_PCMCIA_VIRT,
|
|
.pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
|
|
.length = PALMTX_PCMCIA_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)PALMTX_NAND_ALE_VIRT,
|
|
.pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)PALMTX_NAND_CLE_VIRT,
|
|
.pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
|
|
.length = SZ_1M,
|
|
.type = MT_DEVICE,
|
|
}
|
|
};
|
|
|
|
static void __init palmtx_map_io(void)
|
|
{
|
|
pxa27x_map_io();
|
|
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
|
|
}
|
|
|
|
static void __init palmtx_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
|
|
GPIO_NR_PALMTX_SD_POWER, 0);
|
|
palm27x_pm_init(PALMTX_STR_BASE);
|
|
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
|
|
palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
|
|
GPIO_NR_PALMTX_USB_PULLUP, 1);
|
|
palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
|
|
palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
|
|
GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
|
|
palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
|
|
palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
|
|
palm27x_pmic_init();
|
|
palmtx_kpc_init();
|
|
palmtx_keys_init();
|
|
palmtx_nor_init();
|
|
palmtx_nand_init();
|
|
}
|
|
|
|
MACHINE_START(PALMTX, "Palm T|X")
|
|
.atag_offset = 0x100,
|
|
.map_io = palmtx_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = palmtx_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|