linux/arch/powerpc/kernel/setup_32.c
Kumar Gala ed16c20da6 [POWERPC] Remove old includes from arch/ppc
Remove includes of files that existed in arch/ppc that we dont need in
arch/powerpc anymore.  The following includes were removed:

 <asm/amigappc.h>
 <asm/bootinfo.h>
 <asm/ppcboot.h>
 <asm/ppc_sys.h>
 <asm/residual.h>
 <asm/m8260_pci.h>

This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be
needed and thus removed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:39:35 -05:00

293 lines
6.5 KiB
C

/*
* Common prep/pmac/chrp boot and setup code.
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/ide.h>
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/console.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
#include <asm/bootx.h>
#include <asm/btext.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
#include <asm/serial.h>
#include <asm/udbg.h>
#include "setup.h"
#define DBG(fmt...)
#if defined CONFIG_KGDB
#include <asm/kgdb.h>
#endif
extern void bootx_init(unsigned long r4, unsigned long phys);
struct ide_machdep_calls ppc_ide_md;
int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
int have_of = 1;
#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
EXPORT_SYMBOL(vgacon_remap_base);
#endif
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
*/
int dcache_bsize;
int icache_bsize;
int ucache_bsize;
/*
* We're called here very early in the boot. We determine the machine
* type and call the appropriate low-level setup functions.
* -- Cort <cort@fsmlabs.com>
*
* Note that the kernel may be running at an address which is different
* from the address that it was linked at, so we must use RELOC/PTRRELOC
* to access static data (including strings). -- paulus
*/
unsigned long __init early_init(unsigned long dt_ptr)
{
unsigned long offset = reloc_offset();
struct cpu_spec *spec;
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
__bss_stop - __bss_start);
/*
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
spec = identify_cpu(offset, mfspr(SPRN_PVR));
do_feature_fixups(spec->cpu_features,
PTRRELOC(&__start___ftr_fixup),
PTRRELOC(&__stop___ftr_fixup));
return KERNELBASE + offset;
}
/*
* Find out what kind of machine we're on and save any data we need
* from the early boot process (devtree is copied on pmac by prom_init()).
* This is called very early on the boot process, after a minimal
* MMU environment has been set up but before MMU_init is called.
*/
void __init machine_init(unsigned long dt_ptr, unsigned long phys)
{
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
/* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
probe_machine();
#ifdef CONFIG_6xx
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
cpu_has_feature(CPU_FTR_CAN_NAP))
ppc_md.power_save = ppc6xx_idle;
#endif
if (ppc_md.progress)
ppc_md.progress("id mach(): done", 0x200);
}
#ifdef CONFIG_BOOKE_WDT
/* Checks wdt=x and wdt_period=xx command-line option */
int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period (char *p)
{
if (p)
booke_wdt_period = simple_strtoul(p, NULL, 0);
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif /* CONFIG_BOOKE_WDT */
/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
if (cpu_has_feature(CPU_FTR_L2CR)) {
unsigned long val = simple_strtoul(str, NULL, 0);
printk(KERN_INFO "l2cr set to %lx\n", val);
_set_L2CR(0); /* force invalidate by disable cache */
_set_L2CR(val); /* and enable it */
}
return 1;
}
__setup("l2cr=", ppc_setup_l2cr);
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
unsigned char nvram_read_byte(int addr)
{
if (ppc_md.nvram_read_val)
return ppc_md.nvram_read_val(addr);
return 0xff;
}
EXPORT_SYMBOL(nvram_read_byte);
void nvram_write_byte(unsigned char val, int addr)
{
if (ppc_md.nvram_write_val)
ppc_md.nvram_write_val(addr, val);
}
EXPORT_SYMBOL(nvram_write_byte);
void nvram_sync(void)
{
if (ppc_md.nvram_sync)
ppc_md.nvram_sync();
}
EXPORT_SYMBOL(nvram_sync);
#endif /* CONFIG_NVRAM */
static DEFINE_PER_CPU(struct cpu, cpu_devices);
int __init ppc_init(void)
{
int cpu;
/* clear the progress line */
if (ppc_md.progress)
ppc_md.progress(" ", 0xffff);
/* register CPU devices */
for_each_possible_cpu(cpu) {
struct cpu *c = &per_cpu(cpu_devices, cpu);
c->hotpluggable = 1;
register_cpu(c, cpu);
}
/* call platform init */
if (ppc_md.init != NULL) {
ppc_md.init();
}
return 0;
}
arch_initcall(ppc_init);
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
*cmdline_p = cmd_line;
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
unflatten_device_tree();
check_for_initrd();
if (ppc_md.init_early)
ppc_md.init_early();
find_legacy_serial_ports();
smp_setup_cpu_maps();
/* Register early console */
register_early_udbg_console();
xmon_setup();
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
ppc_md.kgdb_map_scc();
set_debug_traps();
if (strstr(cmd_line, "gdb")) {
if (ppc_md.progress)
ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
printk("kgdb breakpoint activated\n");
breakpoint();
}
#endif
/*
* Set cache line size based on type of cpu as a default.
* Systems with OF can look in the properties on the cpu node(s)
* for a possibly more accurate value.
*/
dcache_bsize = cur_cpu_spec->dcache_bsize;
icache_bsize = cur_cpu_spec->icache_bsize;
ucache_bsize = 0;
if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
ucache_bsize = icache_bsize = dcache_bsize;
/* reboot on panic */
panic_timeout = 180;
if (ppc_md.panic)
setup_panic();
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
}