mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
1c12857c67
Fix a spelling typo in gpio-ftgpio010.c by codespell s/desireable/desirable/ Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200424154103.10311-2-zhengdejin5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
355 lines
8.8 KiB
C
355 lines
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Faraday Technolog FTGPIO010 gpiochip and interrupt routines
|
|
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
|
|
*
|
|
* Based on arch/arm/mach-gemini/gpio.c:
|
|
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
|
|
*
|
|
* Based on plat-mxc/gpio.c:
|
|
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
|
|
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
|
|
*/
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
|
|
/* GPIO registers definition */
|
|
#define GPIO_DATA_OUT 0x00
|
|
#define GPIO_DATA_IN 0x04
|
|
#define GPIO_DIR 0x08
|
|
#define GPIO_BYPASS_IN 0x0C
|
|
#define GPIO_DATA_SET 0x10
|
|
#define GPIO_DATA_CLR 0x14
|
|
#define GPIO_PULL_EN 0x18
|
|
#define GPIO_PULL_TYPE 0x1C
|
|
#define GPIO_INT_EN 0x20
|
|
#define GPIO_INT_STAT_RAW 0x24
|
|
#define GPIO_INT_STAT_MASKED 0x28
|
|
#define GPIO_INT_MASK 0x2C
|
|
#define GPIO_INT_CLR 0x30
|
|
#define GPIO_INT_TYPE 0x34
|
|
#define GPIO_INT_BOTH_EDGE 0x38
|
|
#define GPIO_INT_LEVEL 0x3C
|
|
#define GPIO_DEBOUNCE_EN 0x40
|
|
#define GPIO_DEBOUNCE_PRESCALE 0x44
|
|
|
|
/**
|
|
* struct ftgpio_gpio - Gemini GPIO state container
|
|
* @dev: containing device for this instance
|
|
* @gc: gpiochip for this instance
|
|
* @irq: irqchip for this instance
|
|
* @base: remapped I/O-memory base
|
|
* @clk: silicon clock
|
|
*/
|
|
struct ftgpio_gpio {
|
|
struct device *dev;
|
|
struct gpio_chip gc;
|
|
struct irq_chip irq;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static void ftgpio_gpio_ack_irq(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct ftgpio_gpio *g = gpiochip_get_data(gc);
|
|
|
|
writel(BIT(irqd_to_hwirq(d)), g->base + GPIO_INT_CLR);
|
|
}
|
|
|
|
static void ftgpio_gpio_mask_irq(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct ftgpio_gpio *g = gpiochip_get_data(gc);
|
|
u32 val;
|
|
|
|
val = readl(g->base + GPIO_INT_EN);
|
|
val &= ~BIT(irqd_to_hwirq(d));
|
|
writel(val, g->base + GPIO_INT_EN);
|
|
}
|
|
|
|
static void ftgpio_gpio_unmask_irq(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct ftgpio_gpio *g = gpiochip_get_data(gc);
|
|
u32 val;
|
|
|
|
val = readl(g->base + GPIO_INT_EN);
|
|
val |= BIT(irqd_to_hwirq(d));
|
|
writel(val, g->base + GPIO_INT_EN);
|
|
}
|
|
|
|
static int ftgpio_gpio_set_irq_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct ftgpio_gpio *g = gpiochip_get_data(gc);
|
|
u32 mask = BIT(irqd_to_hwirq(d));
|
|
u32 reg_both, reg_level, reg_type;
|
|
|
|
reg_type = readl(g->base + GPIO_INT_TYPE);
|
|
reg_level = readl(g->base + GPIO_INT_LEVEL);
|
|
reg_both = readl(g->base + GPIO_INT_BOTH_EDGE);
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
reg_type &= ~mask;
|
|
reg_both |= mask;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
reg_type &= ~mask;
|
|
reg_both &= ~mask;
|
|
reg_level &= ~mask;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
reg_type &= ~mask;
|
|
reg_both &= ~mask;
|
|
reg_level |= mask;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
reg_type |= mask;
|
|
reg_level &= ~mask;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
reg_type |= mask;
|
|
reg_level |= mask;
|
|
break;
|
|
default:
|
|
irq_set_handler_locked(d, handle_bad_irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(reg_type, g->base + GPIO_INT_TYPE);
|
|
writel(reg_level, g->base + GPIO_INT_LEVEL);
|
|
writel(reg_both, g->base + GPIO_INT_BOTH_EDGE);
|
|
|
|
ftgpio_gpio_ack_irq(d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ftgpio_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
struct ftgpio_gpio *g = gpiochip_get_data(gc);
|
|
struct irq_chip *irqchip = irq_desc_get_chip(desc);
|
|
int offset;
|
|
unsigned long stat;
|
|
|
|
chained_irq_enter(irqchip, desc);
|
|
|
|
stat = readl(g->base + GPIO_INT_STAT_RAW);
|
|
if (stat)
|
|
for_each_set_bit(offset, &stat, gc->ngpio)
|
|
generic_handle_irq(irq_find_mapping(gc->irq.domain,
|
|
offset));
|
|
|
|
chained_irq_exit(irqchip, desc);
|
|
}
|
|
|
|
static int ftgpio_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
enum pin_config_param param = pinconf_to_config_param(config);
|
|
u32 arg = pinconf_to_config_argument(config);
|
|
struct ftgpio_gpio *g = gpiochip_get_data(gc);
|
|
unsigned long pclk_freq;
|
|
u32 deb_div;
|
|
u32 val;
|
|
|
|
if (param != PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return -ENOTSUPP;
|
|
|
|
/*
|
|
* Debounce only works if interrupts are enabled. The manual
|
|
* states that if PCLK is 66 MHz, and this is set to 0x7D0, then
|
|
* PCLK is divided down to 33 kHz for the debounce timer. 0x7D0 is
|
|
* 2000 decimal, so what they mean is simply that the PCLK is
|
|
* divided by this value.
|
|
*
|
|
* As we get a debounce setting in microseconds, we calculate the
|
|
* desired period time and see if we can get a suitable debounce
|
|
* time.
|
|
*/
|
|
pclk_freq = clk_get_rate(g->clk);
|
|
deb_div = DIV_ROUND_CLOSEST(pclk_freq, arg);
|
|
|
|
/* This register is only 24 bits wide */
|
|
if (deb_div > (1 << 24))
|
|
return -ENOTSUPP;
|
|
|
|
dev_dbg(g->dev, "prescale divisor: %08x, resulting frequency %lu Hz\n",
|
|
deb_div, (pclk_freq/deb_div));
|
|
|
|
val = readl(g->base + GPIO_DEBOUNCE_PRESCALE);
|
|
if (val == deb_div) {
|
|
/*
|
|
* The debounce timer happens to already be set to the
|
|
* desirable value, what a coincidence! We can just enable
|
|
* debounce on this GPIO line and return. This happens more
|
|
* often than you think, for example when all GPIO keys
|
|
* on a system are requesting the same debounce interval.
|
|
*/
|
|
val = readl(g->base + GPIO_DEBOUNCE_EN);
|
|
val |= BIT(offset);
|
|
writel(val, g->base + GPIO_DEBOUNCE_EN);
|
|
return 0;
|
|
}
|
|
|
|
val = readl(g->base + GPIO_DEBOUNCE_EN);
|
|
if (val) {
|
|
/*
|
|
* Oh no! Someone is already using the debounce with
|
|
* another setting than what we need. Bummer.
|
|
*/
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/* First come, first serve */
|
|
writel(deb_div, g->base + GPIO_DEBOUNCE_PRESCALE);
|
|
/* Enable debounce */
|
|
val |= BIT(offset);
|
|
writel(val, g->base + GPIO_DEBOUNCE_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftgpio_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ftgpio_gpio *g;
|
|
struct gpio_irq_chip *girq;
|
|
int irq;
|
|
int ret;
|
|
|
|
g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
|
|
if (!g)
|
|
return -ENOMEM;
|
|
|
|
g->dev = dev;
|
|
|
|
g->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(g->base))
|
|
return PTR_ERR(g->base);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0)
|
|
return irq ? irq : -EINVAL;
|
|
|
|
g->clk = devm_clk_get(dev, NULL);
|
|
if (!IS_ERR(g->clk)) {
|
|
ret = clk_prepare_enable(g->clk);
|
|
if (ret)
|
|
return ret;
|
|
} else if (PTR_ERR(g->clk) == -EPROBE_DEFER) {
|
|
/*
|
|
* Percolate deferrals, for anything else,
|
|
* just live without the clocking.
|
|
*/
|
|
return PTR_ERR(g->clk);
|
|
}
|
|
|
|
ret = bgpio_init(&g->gc, dev, 4,
|
|
g->base + GPIO_DATA_IN,
|
|
g->base + GPIO_DATA_SET,
|
|
g->base + GPIO_DATA_CLR,
|
|
g->base + GPIO_DIR,
|
|
NULL,
|
|
0);
|
|
if (ret) {
|
|
dev_err(dev, "unable to init generic GPIO\n");
|
|
goto dis_clk;
|
|
}
|
|
g->gc.label = "FTGPIO010";
|
|
g->gc.base = -1;
|
|
g->gc.parent = dev;
|
|
g->gc.owner = THIS_MODULE;
|
|
/* ngpio is set by bgpio_init() */
|
|
|
|
/* We need a silicon clock to do debounce */
|
|
if (!IS_ERR(g->clk))
|
|
g->gc.set_config = ftgpio_gpio_set_config;
|
|
|
|
g->irq.name = "FTGPIO010";
|
|
g->irq.irq_ack = ftgpio_gpio_ack_irq;
|
|
g->irq.irq_mask = ftgpio_gpio_mask_irq;
|
|
g->irq.irq_unmask = ftgpio_gpio_unmask_irq;
|
|
g->irq.irq_set_type = ftgpio_gpio_set_irq_type;
|
|
|
|
girq = &g->gc.irq;
|
|
girq->chip = &g->irq;
|
|
girq->parent_handler = ftgpio_gpio_irq_handler;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents) {
|
|
ret = -ENOMEM;
|
|
goto dis_clk;
|
|
}
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_bad_irq;
|
|
girq->parents[0] = irq;
|
|
|
|
/* Disable, unmask and clear all interrupts */
|
|
writel(0x0, g->base + GPIO_INT_EN);
|
|
writel(0x0, g->base + GPIO_INT_MASK);
|
|
writel(~0x0, g->base + GPIO_INT_CLR);
|
|
|
|
/* Clear any use of debounce */
|
|
writel(0x0, g->base + GPIO_DEBOUNCE_EN);
|
|
|
|
ret = devm_gpiochip_add_data(dev, &g->gc, g);
|
|
if (ret)
|
|
goto dis_clk;
|
|
|
|
platform_set_drvdata(pdev, g);
|
|
dev_info(dev, "FTGPIO010 @%p registered\n", g->base);
|
|
|
|
return 0;
|
|
|
|
dis_clk:
|
|
if (!IS_ERR(g->clk))
|
|
clk_disable_unprepare(g->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int ftgpio_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct ftgpio_gpio *g = platform_get_drvdata(pdev);
|
|
|
|
if (!IS_ERR(g->clk))
|
|
clk_disable_unprepare(g->clk);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ftgpio_gpio_of_match[] = {
|
|
{
|
|
.compatible = "cortina,gemini-gpio",
|
|
},
|
|
{
|
|
.compatible = "moxa,moxart-gpio",
|
|
},
|
|
{
|
|
.compatible = "faraday,ftgpio010",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver ftgpio_gpio_driver = {
|
|
.driver = {
|
|
.name = "ftgpio010-gpio",
|
|
.of_match_table = of_match_ptr(ftgpio_gpio_of_match),
|
|
},
|
|
.probe = ftgpio_gpio_probe,
|
|
.remove = ftgpio_gpio_remove,
|
|
};
|
|
builtin_platform_driver(ftgpio_gpio_driver);
|