mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-09 12:04:15 +08:00
5a0e3ad6af
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
478 lines
11 KiB
C
478 lines
11 KiB
C
/*
|
|
* tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels
|
|
*
|
|
* Copyright (C) 2008 Marvell International Ltd.
|
|
* Eric Miao <eric.miao@marvell.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* publishhed by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/tdo24m.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
|
|
|
|
#define TDO24M_SPI_BUFF_SIZE (4)
|
|
#define MODE_QVGA 0
|
|
#define MODE_VGA 1
|
|
|
|
struct tdo24m {
|
|
struct spi_device *spi_dev;
|
|
struct lcd_device *lcd_dev;
|
|
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer;
|
|
uint8_t *buf;
|
|
|
|
int (*adj_mode)(struct tdo24m *lcd, int mode);
|
|
int color_invert;
|
|
|
|
int power;
|
|
int mode;
|
|
};
|
|
|
|
/* use bit 30, 31 as the indicator of command parameter number */
|
|
#define CMD0(x) ((0 << 30) | (x))
|
|
#define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1))
|
|
#define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\
|
|
((x1) << 9) | 0x100 | (x2))
|
|
#define CMD_NULL (-1)
|
|
|
|
static uint32_t lcd_panel_reset[] = {
|
|
CMD0(0x1), /* reset */
|
|
CMD0(0x0), /* nop */
|
|
CMD0(0x0), /* nop */
|
|
CMD0(0x0), /* nop */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_panel_on[] = {
|
|
CMD0(0x29), /* Display ON */
|
|
CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
|
|
CMD0(0x11), /* Sleep out */
|
|
CMD1(0xB0, 0x16), /* Wake */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_panel_off[] = {
|
|
CMD0(0x28), /* Display OFF */
|
|
CMD2(0xB8, 0x80, 0x02), /* Output Control */
|
|
CMD0(0x10), /* Sleep in */
|
|
CMD1(0xB0, 0x00), /* Deep stand by in */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_vga_pass_through_tdo24m[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x80),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x36, 0x50),
|
|
CMD1(0x3B, 0x00),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_qvga_pass_through_tdo24m[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x81),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x36, 0x50),
|
|
CMD1(0x3B, 0x22),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_vga_transfer_tdo24m[] = {
|
|
CMD1(0xcf, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd1, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
|
|
CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
|
|
CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
|
|
CMD1(0xd5, 0x14), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_qvga_transfer[] = {
|
|
CMD1(0xd6, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd8, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
|
|
CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
|
|
CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
|
|
CMD1(0xe0, 0x0a), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_vga_pass_through_tdo35s[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x80),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x3B, 0x00),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_qvga_pass_through_tdo35s[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x81),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x3B, 0x22),
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_vga_transfer_tdo35s[] = {
|
|
CMD1(0xcf, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd1, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd2, 0x00, 0x1e), /* CKV 1,2 timing control */
|
|
CMD2(0xd3, 0x14, 0x28), /* OEV timing control */
|
|
CMD2(0xd4, 0x28, 0x64), /* ASW timing control (1) */
|
|
CMD1(0xd5, 0x28), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static uint32_t lcd_panel_config[] = {
|
|
CMD2(0xb8, 0xff, 0xf9), /* Output control */
|
|
CMD0(0x11), /* sleep out */
|
|
CMD1(0xba, 0x01), /* Display mode (1) */
|
|
CMD1(0xbb, 0x00), /* Display mode (2) */
|
|
CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
|
|
CMD1(0xbf, 0x10), /* Drive system change control */
|
|
CMD1(0xb1, 0x56), /* Booster operation setup */
|
|
CMD1(0xb2, 0x33), /* Booster mode setup */
|
|
CMD1(0xb3, 0x11), /* Booster frequency setup */
|
|
CMD1(0xb4, 0x02), /* Op amp/system clock */
|
|
CMD1(0xb5, 0x35), /* VCS voltage */
|
|
CMD1(0xb6, 0x40), /* VCOM voltage */
|
|
CMD1(0xb7, 0x03), /* External display signal */
|
|
CMD1(0xbd, 0x00), /* ASW slew rate */
|
|
CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
|
|
CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
|
|
CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
|
|
CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
|
|
CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
|
|
CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
|
|
CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
|
|
CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
|
|
CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
|
|
CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
|
|
CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
|
|
CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
|
|
CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
|
|
CMD_NULL,
|
|
};
|
|
|
|
static int tdo24m_writes(struct tdo24m *lcd, uint32_t *array)
|
|
{
|
|
struct spi_transfer *x = &lcd->xfer;
|
|
uint32_t data, *p = array;
|
|
int nparams, err = 0;
|
|
|
|
for (; *p != CMD_NULL; p++) {
|
|
if (!lcd->color_invert && *p == CMD0(0x21))
|
|
continue;
|
|
|
|
nparams = (*p >> 30) & 0x3;
|
|
|
|
data = *p << (7 - nparams);
|
|
switch (nparams) {
|
|
case 0:
|
|
lcd->buf[0] = (data >> 8) & 0xff;
|
|
lcd->buf[1] = data & 0xff;
|
|
break;
|
|
case 1:
|
|
lcd->buf[0] = (data >> 16) & 0xff;
|
|
lcd->buf[1] = (data >> 8) & 0xff;
|
|
lcd->buf[2] = data & 0xff;
|
|
break;
|
|
case 2:
|
|
lcd->buf[0] = (data >> 24) & 0xff;
|
|
lcd->buf[1] = (data >> 16) & 0xff;
|
|
lcd->buf[2] = (data >> 8) & 0xff;
|
|
lcd->buf[3] = data & 0xff;
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
x->len = nparams + 2;
|
|
err = spi_sync(lcd->spi_dev, &lcd->msg);
|
|
if (err)
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tdo24m_adj_mode(struct tdo24m *lcd, int mode)
|
|
{
|
|
switch (mode) {
|
|
case MODE_VGA:
|
|
tdo24m_writes(lcd, lcd_vga_pass_through_tdo24m);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_vga_transfer_tdo24m);
|
|
break;
|
|
case MODE_QVGA:
|
|
tdo24m_writes(lcd, lcd_qvga_pass_through_tdo24m);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_qvga_transfer);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcd->mode = mode;
|
|
return 0;
|
|
}
|
|
|
|
static int tdo35s_adj_mode(struct tdo24m *lcd, int mode)
|
|
{
|
|
switch (mode) {
|
|
case MODE_VGA:
|
|
tdo24m_writes(lcd, lcd_vga_pass_through_tdo35s);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_vga_transfer_tdo35s);
|
|
break;
|
|
case MODE_QVGA:
|
|
tdo24m_writes(lcd, lcd_qvga_pass_through_tdo35s);
|
|
tdo24m_writes(lcd, lcd_panel_config);
|
|
tdo24m_writes(lcd, lcd_qvga_transfer);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcd->mode = mode;
|
|
return 0;
|
|
}
|
|
|
|
static int tdo24m_power_on(struct tdo24m *lcd)
|
|
{
|
|
int err;
|
|
|
|
err = tdo24m_writes(lcd, lcd_panel_on);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = tdo24m_writes(lcd, lcd_panel_reset);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = lcd->adj_mode(lcd, lcd->mode);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int tdo24m_power_off(struct tdo24m *lcd)
|
|
{
|
|
return tdo24m_writes(lcd, lcd_panel_off);
|
|
}
|
|
|
|
static int tdo24m_power(struct tdo24m *lcd, int power)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
|
|
ret = tdo24m_power_on(lcd);
|
|
else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
|
|
ret = tdo24m_power_off(lcd);
|
|
|
|
if (!ret)
|
|
lcd->power = power;
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int tdo24m_set_power(struct lcd_device *ld, int power)
|
|
{
|
|
struct tdo24m *lcd = lcd_get_data(ld);
|
|
return tdo24m_power(lcd, power);
|
|
}
|
|
|
|
static int tdo24m_get_power(struct lcd_device *ld)
|
|
{
|
|
struct tdo24m *lcd = lcd_get_data(ld);
|
|
return lcd->power;
|
|
}
|
|
|
|
static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
|
|
{
|
|
struct tdo24m *lcd = lcd_get_data(ld);
|
|
int mode = MODE_QVGA;
|
|
|
|
if (m->xres == 640 || m->xres == 480)
|
|
mode = MODE_VGA;
|
|
|
|
if (lcd->mode == mode)
|
|
return 0;
|
|
|
|
return lcd->adj_mode(lcd, mode);
|
|
}
|
|
|
|
static struct lcd_ops tdo24m_ops = {
|
|
.get_power = tdo24m_get_power,
|
|
.set_power = tdo24m_set_power,
|
|
.set_mode = tdo24m_set_mode,
|
|
};
|
|
|
|
static int __devinit tdo24m_probe(struct spi_device *spi)
|
|
{
|
|
struct tdo24m *lcd;
|
|
struct spi_message *m;
|
|
struct spi_transfer *x;
|
|
struct tdo24m_platform_data *pdata;
|
|
enum tdo24m_model model;
|
|
int err;
|
|
|
|
pdata = spi->dev.platform_data;
|
|
if (pdata)
|
|
model = pdata->model;
|
|
else
|
|
model = TDO24M;
|
|
|
|
spi->bits_per_word = 8;
|
|
spi->mode = SPI_MODE_3;
|
|
err = spi_setup(spi);
|
|
if (err)
|
|
return err;
|
|
|
|
lcd = kzalloc(sizeof(struct tdo24m), GFP_KERNEL);
|
|
if (!lcd)
|
|
return -ENOMEM;
|
|
|
|
lcd->spi_dev = spi;
|
|
lcd->power = FB_BLANK_POWERDOWN;
|
|
lcd->mode = MODE_VGA; /* default to VGA */
|
|
|
|
lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL);
|
|
if (lcd->buf == NULL) {
|
|
kfree(lcd);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
m = &lcd->msg;
|
|
x = &lcd->xfer;
|
|
|
|
spi_message_init(m);
|
|
|
|
x->cs_change = 1;
|
|
x->tx_buf = &lcd->buf[0];
|
|
spi_message_add_tail(x, m);
|
|
|
|
switch (model) {
|
|
case TDO24M:
|
|
lcd->color_invert = 1;
|
|
lcd->adj_mode = tdo24m_adj_mode;
|
|
break;
|
|
case TDO35S:
|
|
lcd->adj_mode = tdo35s_adj_mode;
|
|
lcd->color_invert = 0;
|
|
break;
|
|
default:
|
|
dev_err(&spi->dev, "Unsupported model");
|
|
goto out_free;
|
|
}
|
|
|
|
lcd->lcd_dev = lcd_device_register("tdo24m", &spi->dev,
|
|
lcd, &tdo24m_ops);
|
|
if (IS_ERR(lcd->lcd_dev)) {
|
|
err = PTR_ERR(lcd->lcd_dev);
|
|
goto out_free;
|
|
}
|
|
|
|
dev_set_drvdata(&spi->dev, lcd);
|
|
err = tdo24m_power(lcd, FB_BLANK_UNBLANK);
|
|
if (err)
|
|
goto out_unregister;
|
|
|
|
return 0;
|
|
|
|
out_unregister:
|
|
lcd_device_unregister(lcd->lcd_dev);
|
|
out_free:
|
|
kfree(lcd->buf);
|
|
kfree(lcd);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit tdo24m_remove(struct spi_device *spi)
|
|
{
|
|
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
|
|
|
|
tdo24m_power(lcd, FB_BLANK_POWERDOWN);
|
|
lcd_device_unregister(lcd->lcd_dev);
|
|
kfree(lcd->buf);
|
|
kfree(lcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int tdo24m_suspend(struct spi_device *spi, pm_message_t state)
|
|
{
|
|
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
|
|
|
|
return tdo24m_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static int tdo24m_resume(struct spi_device *spi)
|
|
{
|
|
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
|
|
|
|
return tdo24m_power(lcd, FB_BLANK_UNBLANK);
|
|
}
|
|
#else
|
|
#define tdo24m_suspend NULL
|
|
#define tdo24m_resume NULL
|
|
#endif
|
|
|
|
/* Power down all displays on reboot, poweroff or halt */
|
|
static void tdo24m_shutdown(struct spi_device *spi)
|
|
{
|
|
struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
|
|
|
|
tdo24m_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static struct spi_driver tdo24m_driver = {
|
|
.driver = {
|
|
.name = "tdo24m",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = tdo24m_probe,
|
|
.remove = __devexit_p(tdo24m_remove),
|
|
.shutdown = tdo24m_shutdown,
|
|
.suspend = tdo24m_suspend,
|
|
.resume = tdo24m_resume,
|
|
};
|
|
|
|
static int __init tdo24m_init(void)
|
|
{
|
|
return spi_register_driver(&tdo24m_driver);
|
|
}
|
|
module_init(tdo24m_init);
|
|
|
|
static void __exit tdo24m_exit(void)
|
|
{
|
|
spi_unregister_driver(&tdo24m_driver);
|
|
}
|
|
module_exit(tdo24m_exit);
|
|
|
|
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
|
|
MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:tdo24m");
|