mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
9f68e3655a
uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJeMm6RAAoJEAx081l5xIa+vN8P/0j4jEOv+KIinAhoH+LG3EpD m2TUuu5OQIoBrcCoWOgFBk3wqYpw6PdMBdkXh+5sE5lfeBynp8oC3Bin+QsHJE05 eGBpZtHe+70MQb0Eha+Aic0hchvBKzRnq6i0MYSIHn6afs76dLmF8knTjycxrvV5 Xu1Z3WDmjzqgWF9ja5JCD6fby11seP5RrwObYKVikO35QQyJJwGSGKgu5rq/pByK /n0PCnCOINuL0Lz6J9qexdh/0/XYFQilRC31GJNlKbDSFuECF0GOEzEE/xUBW/pI dLh2YwIIygm18Gar9PgvMwXJn3BfzQ0qEJsf+HlQeNw9iLgbHpp2AsTxHTE87OGe R/y85taW3jGjPsNOKZOeLpvg/Ro8l8ZipLApvDCG2O22DThg/cd6NDjZxl1FJfRH acDG/JdgPo5MbdRAH/cM1WuFS9gEM+0BeSQ5gCjtPakF+X4Vz+ABFDLMRJoaejkJ q8DG32TQXELQx0RMghsqK7YCWGfl+2alA1u9w6TgJh9Rq4iVckvpDeqAZnK1Adkc 87g957Tl0n6FA4wJj/t5jrceiLRMJAm/rBK+R3GZNfWrgx4bHbCmb4fZDZsrFzph nbAjNJ5kOchrFCaRR47ULby6+Q14MAFbkWq4Crfu4YDdzUkTPpep6pi2GIe8w0rV P0hdYOYJf6LUda0utuQX =oFrI -----END PGP SIGNATURE----- Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
1534 lines
43 KiB
C
1534 lines
43 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/drivers/video/sstfb.c -- voodoo graphics frame buffer
|
|
*
|
|
* Copyright (c) 2000-2002 Ghozlane Toumi <gtoumi@laposte.net>
|
|
*
|
|
* Created 15 Jan 2000 by Ghozlane Toumi
|
|
*
|
|
* Contributions (and many thanks) :
|
|
*
|
|
* 03/2001 James Simmons <jsimmons@infradead.org>
|
|
* 04/2001 Paul Mundt <lethal@chaoticdreams.org>
|
|
* 05/2001 Urs Ganse <ursg@uni.de>
|
|
* (initial work on voodoo2 port, interlace)
|
|
* 09/2002 Helge Deller <deller@gmx.de>
|
|
* (enable driver on big-endian machines (hppa), ioctl fixes)
|
|
* 12/2002 Helge Deller <deller@gmx.de>
|
|
* (port driver to new frambuffer infrastructure)
|
|
* 01/2003 Helge Deller <deller@gmx.de>
|
|
* (initial work on fb hardware acceleration for voodoo2)
|
|
* 08/2006 Alan Cox <alan@redhat.com>
|
|
* Remove never finished and bogus 24/32bit support
|
|
* Clean up macro abuse
|
|
* Minor tidying for format.
|
|
* 12/2006 Helge Deller <deller@gmx.de>
|
|
* add /sys/class/graphics/fbX/vgapass sysfs-interface
|
|
* add module option "mode_option" to set initial screen mode
|
|
* use fbdev default videomode database
|
|
* remove debug functions from ioctl
|
|
*/
|
|
|
|
/*
|
|
* The voodoo1 has the following memory mapped address space:
|
|
* 0x000000 - 0x3fffff : registers (4MB)
|
|
* 0x400000 - 0x7fffff : linear frame buffer (4MB)
|
|
* 0x800000 - 0xffffff : texture memory (8MB)
|
|
*/
|
|
|
|
/*
|
|
* misc notes, TODOs, toASKs, and deep thoughts
|
|
|
|
-TODO: at one time or another test that the mode is acceptable by the monitor
|
|
-ASK: Can I choose different ordering for the color bitfields (rgba argb ...)
|
|
which one should i use ? is there any preferred one ? It seems ARGB is
|
|
the one ...
|
|
-TODO: in set_var check the validity of timings (hsync vsync)...
|
|
-TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via
|
|
a nop command. so it's ok as long as the commands we pass don't go
|
|
through the fifo. warning: issuing a nop command seems to need pci_fifo
|
|
-FIXME: in case of failure in the init sequence, be sure we return to a safe
|
|
state.
|
|
- FIXME: Use accelerator for 2D scroll
|
|
-FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20)
|
|
*/
|
|
|
|
/*
|
|
* debug info
|
|
* SST_DEBUG : enable debugging
|
|
* SST_DEBUG_REG : debug registers
|
|
* 0 : no debug
|
|
* 1 : dac calls, [un]set_bits, FbiInit
|
|
* 2 : insane debug level (log every register read/write)
|
|
* SST_DEBUG_FUNC : functions
|
|
* 0 : no debug
|
|
* 1 : function call / debug ioctl
|
|
* 2 : variables
|
|
* 3 : flood . you don't want to do that. trust me.
|
|
* SST_DEBUG_VAR : debug display/var structs
|
|
* 0 : no debug
|
|
* 1 : dumps display, fb_var
|
|
*
|
|
* sstfb specific ioctls:
|
|
* toggle vga (0x46db) : toggle vga_pass_through
|
|
*/
|
|
|
|
#undef SST_DEBUG
|
|
|
|
|
|
/*
|
|
* Includes
|
|
*/
|
|
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
#include <linux/uaccess.h>
|
|
#include <video/sstfb.h>
|
|
|
|
|
|
/* initialized by setup */
|
|
|
|
static bool vgapass; /* enable VGA passthrough cable */
|
|
static int mem; /* mem size in MB, 0 = autodetect */
|
|
static bool clipping = 1; /* use clipping (slower, safer) */
|
|
static int gfxclk; /* force FBI freq in Mhz . Dangerous */
|
|
static bool slowpci; /* slow PCI settings */
|
|
|
|
/*
|
|
Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60
|
|
*/
|
|
#define DEFAULT_VIDEO_MODE "640x480@60"
|
|
|
|
static char *mode_option = DEFAULT_VIDEO_MODE;
|
|
|
|
enum {
|
|
ID_VOODOO1 = 0,
|
|
ID_VOODOO2 = 1,
|
|
};
|
|
|
|
#define IS_VOODOO2(par) ((par)->type == ID_VOODOO2)
|
|
|
|
static struct sst_spec voodoo_spec[] = {
|
|
{ .name = "Voodoo Graphics", .default_gfx_clock = 50000, .max_gfxclk = 60 },
|
|
{ .name = "Voodoo2", .default_gfx_clock = 75000, .max_gfxclk = 85 },
|
|
};
|
|
|
|
|
|
/*
|
|
* debug functions
|
|
*/
|
|
|
|
#if (SST_DEBUG_REG > 0)
|
|
static void sst_dbg_print_read_reg(u32 reg, u32 val) {
|
|
const char *regname;
|
|
switch (reg) {
|
|
case FBIINIT0: regname = "FbiInit0"; break;
|
|
case FBIINIT1: regname = "FbiInit1"; break;
|
|
case FBIINIT2: regname = "FbiInit2"; break;
|
|
case FBIINIT3: regname = "FbiInit3"; break;
|
|
case FBIINIT4: regname = "FbiInit4"; break;
|
|
case FBIINIT5: regname = "FbiInit5"; break;
|
|
case FBIINIT6: regname = "FbiInit6"; break;
|
|
default: regname = NULL; break;
|
|
}
|
|
if (regname == NULL)
|
|
r_ddprintk("sst_read(%#x): %#x\n", reg, val);
|
|
else
|
|
r_dprintk(" sst_read(%s): %#x\n", regname, val);
|
|
}
|
|
|
|
static void sst_dbg_print_write_reg(u32 reg, u32 val) {
|
|
const char *regname;
|
|
switch (reg) {
|
|
case FBIINIT0: regname = "FbiInit0"; break;
|
|
case FBIINIT1: regname = "FbiInit1"; break;
|
|
case FBIINIT2: regname = "FbiInit2"; break;
|
|
case FBIINIT3: regname = "FbiInit3"; break;
|
|
case FBIINIT4: regname = "FbiInit4"; break;
|
|
case FBIINIT5: regname = "FbiInit5"; break;
|
|
case FBIINIT6: regname = "FbiInit6"; break;
|
|
default: regname = NULL; break;
|
|
}
|
|
if (regname == NULL)
|
|
r_ddprintk("sst_write(%#x, %#x)\n", reg, val);
|
|
else
|
|
r_dprintk(" sst_write(%s, %#x)\n", regname, val);
|
|
}
|
|
#else /* (SST_DEBUG_REG > 0) */
|
|
# define sst_dbg_print_read_reg(reg, val) do {} while(0)
|
|
# define sst_dbg_print_write_reg(reg, val) do {} while(0)
|
|
#endif /* (SST_DEBUG_REG > 0) */
|
|
|
|
/*
|
|
* hardware access functions
|
|
*/
|
|
|
|
/* register access */
|
|
#define sst_read(reg) __sst_read(par->mmio_vbase, reg)
|
|
#define sst_write(reg,val) __sst_write(par->mmio_vbase, reg, val)
|
|
#define sst_set_bits(reg,val) __sst_set_bits(par->mmio_vbase, reg, val)
|
|
#define sst_unset_bits(reg,val) __sst_unset_bits(par->mmio_vbase, reg, val)
|
|
#define sst_dac_read(reg) __sst_dac_read(par->mmio_vbase, reg)
|
|
#define sst_dac_write(reg,val) __sst_dac_write(par->mmio_vbase, reg, val)
|
|
#define dac_i_read(reg) __dac_i_read(par->mmio_vbase, reg)
|
|
#define dac_i_write(reg,val) __dac_i_write(par->mmio_vbase, reg, val)
|
|
|
|
static inline u32 __sst_read(u8 __iomem *vbase, u32 reg)
|
|
{
|
|
u32 ret = readl(vbase + reg);
|
|
sst_dbg_print_read_reg(reg, ret);
|
|
return ret;
|
|
}
|
|
|
|
static inline void __sst_write(u8 __iomem *vbase, u32 reg, u32 val)
|
|
{
|
|
sst_dbg_print_write_reg(reg, val);
|
|
writel(val, vbase + reg);
|
|
}
|
|
|
|
static inline void __sst_set_bits(u8 __iomem *vbase, u32 reg, u32 val)
|
|
{
|
|
r_dprintk("sst_set_bits(%#x, %#x)\n", reg, val);
|
|
__sst_write(vbase, reg, __sst_read(vbase, reg) | val);
|
|
}
|
|
|
|
static inline void __sst_unset_bits(u8 __iomem *vbase, u32 reg, u32 val)
|
|
{
|
|
r_dprintk("sst_unset_bits(%#x, %#x)\n", reg, val);
|
|
__sst_write(vbase, reg, __sst_read(vbase, reg) & ~val);
|
|
}
|
|
|
|
/*
|
|
* wait for the fbi chip. ASK: what happens if the fbi is stuck ?
|
|
*
|
|
* the FBI is supposed to be ready if we receive 5 time
|
|
* in a row a "idle" answer to our requests
|
|
*/
|
|
|
|
#define sst_wait_idle() __sst_wait_idle(par->mmio_vbase)
|
|
|
|
static int __sst_wait_idle(u8 __iomem *vbase)
|
|
{
|
|
int count = 0;
|
|
|
|
/* if (doFBINOP) __sst_write(vbase, NOPCMD, 0); */
|
|
|
|
while(1) {
|
|
if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) {
|
|
f_dddprintk("status: busy\n");
|
|
/* FIXME basically, this is a busy wait. maybe not that good. oh well;
|
|
* this is a small loop after all.
|
|
* Or maybe we should use mdelay() or udelay() here instead ? */
|
|
count = 0;
|
|
} else {
|
|
count++;
|
|
f_dddprintk("status: idle(%d)\n", count);
|
|
}
|
|
if (count >= 5) return 1;
|
|
/* XXX do something to avoid hanging the machine if the voodoo is out */
|
|
}
|
|
}
|
|
|
|
|
|
/* dac access */
|
|
/* dac_read should be remaped to FbiInit2 (via the pci reg init_enable) */
|
|
static u8 __sst_dac_read(u8 __iomem *vbase, u8 reg)
|
|
{
|
|
u8 ret;
|
|
|
|
reg &= 0x07;
|
|
__sst_write(vbase, DAC_DATA, ((u32)reg << 8) | DAC_READ_CMD );
|
|
__sst_wait_idle(vbase);
|
|
/* udelay(10); */
|
|
ret = __sst_read(vbase, DAC_READ) & 0xff;
|
|
r_dprintk("sst_dac_read(%#x): %#x\n", reg, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __sst_dac_write(u8 __iomem *vbase, u8 reg, u8 val)
|
|
{
|
|
r_dprintk("sst_dac_write(%#x, %#x)\n", reg, val);
|
|
reg &= 0x07;
|
|
__sst_write(vbase, DAC_DATA,(((u32)reg << 8)) | (u32)val);
|
|
__sst_wait_idle(vbase);
|
|
}
|
|
|
|
/* indexed access to ti/att dacs */
|
|
static u32 __dac_i_read(u8 __iomem *vbase, u8 reg)
|
|
{
|
|
u32 ret;
|
|
|
|
__sst_dac_write(vbase, DACREG_ADDR_I, reg);
|
|
ret = __sst_dac_read(vbase, DACREG_DATA_I);
|
|
r_dprintk("sst_dac_read_i(%#x): %#x\n", reg, ret);
|
|
return ret;
|
|
}
|
|
static void __dac_i_write(u8 __iomem *vbase, u8 reg,u8 val)
|
|
{
|
|
r_dprintk("sst_dac_write_i(%#x, %#x)\n", reg, val);
|
|
__sst_dac_write(vbase, DACREG_ADDR_I, reg);
|
|
__sst_dac_write(vbase, DACREG_DATA_I, val);
|
|
}
|
|
|
|
/* compute the m,n,p , returns the real freq
|
|
* (ics datasheet : N <-> N1 , P <-> N2)
|
|
*
|
|
* Fout= Fref * (M+2)/( 2^P * (N+2))
|
|
* we try to get close to the asked freq
|
|
* with P as high, and M as low as possible
|
|
* range:
|
|
* ti/att : 0 <= M <= 255; 0 <= P <= 3; 0<= N <= 63
|
|
* ics : 1 <= M <= 127; 0 <= P <= 3; 1<= N <= 31
|
|
* we'll use the lowest limitation, should be precise enouth
|
|
*/
|
|
static int sst_calc_pll(const int freq, int *freq_out, struct pll_timing *t)
|
|
{
|
|
int m, m2, n, p, best_err, fout;
|
|
int best_n = -1;
|
|
int best_m = -1;
|
|
|
|
best_err = freq;
|
|
p = 3;
|
|
/* f * 2^P = vco should be less than VCOmax ~ 250 MHz for ics*/
|
|
while (((1 << p) * freq > VCO_MAX) && (p >= 0))
|
|
p--;
|
|
if (p == -1)
|
|
return -EINVAL;
|
|
for (n = 1; n < 32; n++) {
|
|
/* calc 2 * m so we can round it later*/
|
|
m2 = (2 * freq * (1 << p) * (n + 2) ) / DAC_FREF - 4 ;
|
|
|
|
m = (m2 % 2 ) ? m2/2+1 : m2/2 ;
|
|
if (m >= 128)
|
|
break;
|
|
fout = (DAC_FREF * (m + 2)) / ((1 << p) * (n + 2));
|
|
if ((abs(fout - freq) < best_err) && (m > 0)) {
|
|
best_n = n;
|
|
best_m = m;
|
|
best_err = abs(fout - freq);
|
|
/* we get the lowest m , allowing 0.5% error in freq*/
|
|
if (200*best_err < freq) break;
|
|
}
|
|
}
|
|
if (best_n == -1) /* unlikely, but who knows ? */
|
|
return -EINVAL;
|
|
t->p = p;
|
|
t->n = best_n;
|
|
t->m = best_m;
|
|
*freq_out = (DAC_FREF * (t->m + 2)) / ((1 << t->p) * (t->n + 2));
|
|
f_ddprintk ("m: %d, n: %d, p: %d, F: %dKhz\n",
|
|
t->m, t->n, t->p, *freq_out);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* clear lfb screen
|
|
*/
|
|
static void sstfb_clear_screen(struct fb_info *info)
|
|
{
|
|
/* clear screen */
|
|
fb_memset(info->screen_base, 0, info->fix.smem_len);
|
|
}
|
|
|
|
|
|
/**
|
|
* sstfb_check_var - Optional function. Validates a var passed in.
|
|
* @var: frame buffer variable screen structure
|
|
* @info: frame buffer structure that represents a single frame buffer
|
|
*
|
|
* Limit to the abilities of a single chip as SLI is not supported
|
|
* by this driver.
|
|
*/
|
|
|
|
static int sstfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
int hSyncOff = var->xres + var->right_margin + var->left_margin;
|
|
int vSyncOff = var->yres + var->lower_margin + var->upper_margin;
|
|
int vBackPorch = var->left_margin, yDim = var->yres;
|
|
int vSyncOn = var->vsync_len;
|
|
int tiles_in_X, real_length;
|
|
unsigned int freq;
|
|
|
|
if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) {
|
|
printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n",
|
|
PICOS2KHZ(var->pixclock));
|
|
return -EINVAL;
|
|
}
|
|
var->pixclock = KHZ2PICOS(freq);
|
|
|
|
if (var->vmode & FB_VMODE_INTERLACED)
|
|
vBackPorch += (vBackPorch % 2);
|
|
if (var->vmode & FB_VMODE_DOUBLE) {
|
|
vBackPorch <<= 1;
|
|
yDim <<=1;
|
|
vSyncOn <<=1;
|
|
vSyncOff <<=1;
|
|
}
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 0 ... 16 :
|
|
var->bits_per_pixel = 16;
|
|
break;
|
|
default :
|
|
printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* validity tests */
|
|
if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1 ||
|
|
hSyncOff <= 1 || var->left_margin <= 2 || vSyncOn <= 0 ||
|
|
vSyncOff <= 0 || vBackPorch <= 0) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_VOODOO2(par)) {
|
|
/* Voodoo 2 limits */
|
|
tiles_in_X = (var->xres + 63 ) / 64 * 2;
|
|
|
|
if (var->xres > POW2(11) || yDim >= POW2(11)) {
|
|
printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
|
|
var->xres, var->yres);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) ||
|
|
var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) ||
|
|
vSyncOff >= POW2(13) || vBackPorch >= POW2(9) ||
|
|
tiles_in_X >= POW2(6) || tiles_in_X <= 0) {
|
|
printk(KERN_ERR "sstfb: Unsupported timings\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
/* Voodoo limits */
|
|
tiles_in_X = (var->xres + 63 ) / 64;
|
|
|
|
if (var->vmode) {
|
|
printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n",
|
|
var->vmode);
|
|
return -EINVAL;
|
|
}
|
|
if (var->xres > POW2(10) || var->yres >= POW2(10)) {
|
|
printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
|
|
var->xres, var->yres);
|
|
return -EINVAL;
|
|
}
|
|
if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) ||
|
|
var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) ||
|
|
vSyncOff >= POW2(12) || vBackPorch >= POW2(8) ||
|
|
tiles_in_X >= POW2(4) || tiles_in_X <= 0) {
|
|
printk(KERN_ERR "sstfb: Unsupported timings\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* it seems that the fbi uses tiles of 64x16 pixels to "map" the mem */
|
|
/* FIXME: i don't like this... looks wrong */
|
|
real_length = tiles_in_X * (IS_VOODOO2(par) ? 32 : 64 )
|
|
* ((var->bits_per_pixel == 16) ? 2 : 4);
|
|
|
|
if (real_length * yDim > info->fix.smem_len) {
|
|
printk(KERN_ERR "sstfb: Not enough video memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
var->sync &= (FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT);
|
|
var->vmode &= (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE);
|
|
var->xoffset = 0;
|
|
var->yoffset = 0;
|
|
var->height = -1;
|
|
var->width = -1;
|
|
|
|
/*
|
|
* correct the color bit fields
|
|
*/
|
|
/* var->{red|green|blue}.msb_right = 0; */
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 16: /* RGB 565 LfbMode 0 */
|
|
var->red.length = 5;
|
|
var->green.length = 6;
|
|
var->blue.length = 5;
|
|
var->transp.length = 0;
|
|
|
|
var->red.offset = 11;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->transp.offset = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sstfb_set_par - Optional function. Alters the hardware state.
|
|
* @info: frame buffer structure that represents a single frame buffer
|
|
*/
|
|
static int sstfb_set_par(struct fb_info *info)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
u32 lfbmode, fbiinit1, fbiinit2, fbiinit3, fbiinit5, fbiinit6=0;
|
|
struct pci_dev *sst_dev = par->dev;
|
|
unsigned int freq;
|
|
int ntiles;
|
|
|
|
par->hSyncOff = info->var.xres + info->var.right_margin + info->var.left_margin;
|
|
|
|
par->yDim = info->var.yres;
|
|
par->vSyncOn = info->var.vsync_len;
|
|
par->vSyncOff = info->var.yres + info->var.lower_margin + info->var.upper_margin;
|
|
par->vBackPorch = info->var.upper_margin;
|
|
|
|
/* We need par->pll */
|
|
sst_calc_pll(PICOS2KHZ(info->var.pixclock), &freq, &par->pll);
|
|
|
|
if (info->var.vmode & FB_VMODE_INTERLACED)
|
|
par->vBackPorch += (par->vBackPorch % 2);
|
|
if (info->var.vmode & FB_VMODE_DOUBLE) {
|
|
par->vBackPorch <<= 1;
|
|
par->yDim <<=1;
|
|
par->vSyncOn <<=1;
|
|
par->vSyncOff <<=1;
|
|
}
|
|
|
|
if (IS_VOODOO2(par)) {
|
|
/* voodoo2 has 32 pixel wide tiles , BUT strange things
|
|
happen with odd number of tiles */
|
|
par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2;
|
|
} else {
|
|
/* voodoo1 has 64 pixels wide tiles. */
|
|
par->tiles_in_X = (info->var.xres + 63 ) / 64;
|
|
}
|
|
|
|
f_ddprintk("hsync_len hSyncOff vsync_len vSyncOff\n");
|
|
f_ddprintk("%-7d %-8d %-7d %-8d\n",
|
|
info->var.hsync_len, par->hSyncOff,
|
|
par->vSyncOn, par->vSyncOff);
|
|
f_ddprintk("left_margin upper_margin xres yres Freq\n");
|
|
f_ddprintk("%-10d %-10d %-4d %-4d %-8ld\n",
|
|
info->var.left_margin, info->var.upper_margin,
|
|
info->var.xres, info->var.yres, PICOS2KHZ(info->var.pixclock));
|
|
|
|
sst_write(NOPCMD, 0);
|
|
sst_wait_idle();
|
|
pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
|
|
sst_set_bits(FBIINIT1, VIDEO_RESET);
|
|
sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
|
|
sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
|
|
sst_wait_idle();
|
|
|
|
/*sst_unset_bits (FBIINIT0, FBI_RESET); / reenable FBI ? */
|
|
|
|
sst_write(BACKPORCH, par->vBackPorch << 16 | (info->var.left_margin - 2));
|
|
sst_write(VIDEODIMENSIONS, par->yDim << 16 | (info->var.xres - 1));
|
|
sst_write(HSYNC, (par->hSyncOff - 1) << 16 | (info->var.hsync_len - 1));
|
|
sst_write(VSYNC, par->vSyncOff << 16 | par->vSyncOn);
|
|
|
|
fbiinit2 = sst_read(FBIINIT2);
|
|
fbiinit3 = sst_read(FBIINIT3);
|
|
|
|
/* everything is reset. we enable fbiinit2/3 remap : dac access ok */
|
|
pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
|
|
PCI_EN_INIT_WR | PCI_REMAP_DAC );
|
|
|
|
par->dac_sw.set_vidmod(info, info->var.bits_per_pixel);
|
|
|
|
/* set video clock */
|
|
par->dac_sw.set_pll(info, &par->pll, VID_CLOCK);
|
|
|
|
/* disable fbiinit2/3 remap */
|
|
pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
|
|
PCI_EN_INIT_WR);
|
|
|
|
/* restore fbiinit2/3 */
|
|
sst_write(FBIINIT2,fbiinit2);
|
|
sst_write(FBIINIT3,fbiinit3);
|
|
|
|
fbiinit1 = (sst_read(FBIINIT1) & VIDEO_MASK)
|
|
| EN_DATA_OE
|
|
| EN_BLANK_OE
|
|
| EN_HVSYNC_OE
|
|
| EN_DCLK_OE
|
|
/* | (15 << TILES_IN_X_SHIFT) */
|
|
| SEL_INPUT_VCLK_2X
|
|
/* | (2 << VCLK_2X_SEL_DEL_SHIFT)
|
|
| (2 << VCLK_DEL_SHIFT) */;
|
|
/* try with vclk_in_delay =0 (bits 29:30) , vclk_out_delay =0 (bits(27:28)
|
|
in (near) future set them accordingly to revision + resolution (cf glide)
|
|
first understand what it stands for :)
|
|
FIXME: there are some artefacts... check for the vclk_in_delay
|
|
lets try with 6ns delay in both vclk_out & in...
|
|
doh... they're still there :\
|
|
*/
|
|
|
|
ntiles = par->tiles_in_X;
|
|
if (IS_VOODOO2(par)) {
|
|
fbiinit1 |= ((ntiles & 0x20) >> 5) << TILES_IN_X_MSB_SHIFT
|
|
| ((ntiles & 0x1e) >> 1) << TILES_IN_X_SHIFT;
|
|
/* as the only value of importance for us in fbiinit6 is tiles in X (lsb),
|
|
and as reading fbinit 6 will return crap (see FBIINIT6_DEFAULT) we just
|
|
write our value. BTW due to the dac unable to read odd number of tiles, this
|
|
field is always null ... */
|
|
fbiinit6 = (ntiles & 0x1) << TILES_IN_X_LSB_SHIFT;
|
|
}
|
|
else
|
|
fbiinit1 |= ntiles << TILES_IN_X_SHIFT;
|
|
|
|
switch (info->var.bits_per_pixel) {
|
|
case 16:
|
|
fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
sst_write(FBIINIT1, fbiinit1);
|
|
if (IS_VOODOO2(par)) {
|
|
sst_write(FBIINIT6, fbiinit6);
|
|
fbiinit5=sst_read(FBIINIT5) & FBIINIT5_MASK ;
|
|
if (info->var.vmode & FB_VMODE_INTERLACED)
|
|
fbiinit5 |= INTERLACE;
|
|
if (info->var.vmode & FB_VMODE_DOUBLE)
|
|
fbiinit5 |= VDOUBLESCAN;
|
|
if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
|
|
fbiinit5 |= HSYNC_HIGH;
|
|
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
|
|
fbiinit5 |= VSYNC_HIGH;
|
|
sst_write(FBIINIT5, fbiinit5);
|
|
}
|
|
sst_wait_idle();
|
|
sst_unset_bits(FBIINIT1, VIDEO_RESET);
|
|
sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
|
|
sst_set_bits(FBIINIT2, EN_DRAM_REFRESH);
|
|
/* disables fbiinit writes */
|
|
pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
|
|
|
|
/* set lfbmode : set mode + front buffer for reads/writes
|
|
+ disable pipeline */
|
|
switch (info->var.bits_per_pixel) {
|
|
case 16:
|
|
lfbmode = LFB_565;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
#if defined(__BIG_ENDIAN)
|
|
/* Enable byte-swizzle functionality in hardware.
|
|
* With this enabled, all our read- and write-accesses to
|
|
* the voodoo framebuffer can be done in native format, and
|
|
* the hardware will automatically convert it to little-endian.
|
|
* - tested on HP-PARISC, Helge Deller <deller@gmx.de> */
|
|
lfbmode |= ( LFB_WORD_SWIZZLE_WR | LFB_BYTE_SWIZZLE_WR |
|
|
LFB_WORD_SWIZZLE_RD | LFB_BYTE_SWIZZLE_RD );
|
|
#endif
|
|
|
|
if (clipping) {
|
|
sst_write(LFBMODE, lfbmode | EN_PXL_PIPELINE);
|
|
/*
|
|
* Set "clipping" dimensions. If clipping is disabled and
|
|
* writes to offscreen areas of the framebuffer are performed,
|
|
* the "behaviour is undefined" (_very_ undefined) - Urs
|
|
*/
|
|
/* btw, it requires enabling pixel pipeline in LFBMODE .
|
|
off screen read/writes will just wrap and read/print pixels
|
|
on screen. Ugly but not that dangerous */
|
|
f_ddprintk("setting clipping dimensions 0..%d, 0..%d\n",
|
|
info->var.xres - 1, par->yDim - 1);
|
|
|
|
sst_write(CLIP_LEFT_RIGHT, info->var.xres);
|
|
sst_write(CLIP_LOWY_HIGHY, par->yDim);
|
|
sst_set_bits(FBZMODE, EN_CLIPPING | EN_RGB_WRITE);
|
|
} else {
|
|
/* no clipping : direct access, no pipeline */
|
|
sst_write(LFBMODE, lfbmode);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sstfb_setcolreg - Optional function. Sets a color register.
|
|
* @regno: hardware colormap register
|
|
* @red: frame buffer colormap structure
|
|
* @green: The green value which can be up to 16 bits wide
|
|
* @blue: The blue value which can be up to 16 bits wide.
|
|
* @transp: If supported the alpha value which can be up to 16 bits wide.
|
|
* @info: frame buffer info structure
|
|
*/
|
|
static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
u_int transp, struct fb_info *info)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
u32 col;
|
|
|
|
f_dddprintk("sstfb_setcolreg\n");
|
|
f_dddprintk("%-2d rgbt: %#x, %#x, %#x, %#x\n",
|
|
regno, red, green, blue, transp);
|
|
if (regno > 15)
|
|
return 0;
|
|
|
|
red >>= (16 - info->var.red.length);
|
|
green >>= (16 - info->var.green.length);
|
|
blue >>= (16 - info->var.blue.length);
|
|
transp >>= (16 - info->var.transp.length);
|
|
col = (red << info->var.red.offset)
|
|
| (green << info->var.green.offset)
|
|
| (blue << info->var.blue.offset)
|
|
| (transp << info->var.transp.offset);
|
|
|
|
par->palette[regno] = col;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sstfb_setvgapass( struct fb_info *info, int enable )
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
struct pci_dev *sst_dev = par->dev;
|
|
u32 fbiinit0, tmp;
|
|
|
|
enable = enable ? 1:0;
|
|
if (par->vgapass == enable)
|
|
return;
|
|
par->vgapass = enable;
|
|
|
|
pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
|
|
pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
|
|
tmp | PCI_EN_INIT_WR );
|
|
fbiinit0 = sst_read (FBIINIT0);
|
|
if (par->vgapass) {
|
|
sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH);
|
|
fb_info(info, "Enabling VGA pass-through\n");
|
|
} else {
|
|
sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH);
|
|
fb_info(info, "Disabling VGA pass-through\n");
|
|
}
|
|
pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
|
|
}
|
|
|
|
static ssize_t store_vgapass(struct device *device, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct fb_info *info = dev_get_drvdata(device);
|
|
char ** last = NULL;
|
|
int val;
|
|
|
|
val = simple_strtoul(buf, last, 0);
|
|
sstfb_setvgapass(info, val);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_vgapass(struct device *device, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct fb_info *info = dev_get_drvdata(device);
|
|
struct sstfb_par *par = info->par;
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", par->vgapass);
|
|
}
|
|
|
|
static struct device_attribute device_attrs[] = {
|
|
__ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass)
|
|
};
|
|
|
|
static int sstfb_ioctl(struct fb_info *info, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct sstfb_par *par;
|
|
u32 val;
|
|
|
|
switch (cmd) {
|
|
/* set/get VGA pass_through mode */
|
|
case SSTFB_SET_VGAPASS:
|
|
if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
|
|
return -EFAULT;
|
|
sstfb_setvgapass(info, val);
|
|
return 0;
|
|
case SSTFB_GET_VGAPASS:
|
|
par = info->par;
|
|
val = par->vgapass;
|
|
if (copy_to_user((void __user *)arg, &val, sizeof(val)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
/*
|
|
* Screen-to-Screen BitBlt 2D command (for the bmove fb op.) - Voodoo2 only
|
|
*/
|
|
#if 0
|
|
static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
u32 stride = info->fix.line_length;
|
|
|
|
if (!IS_VOODOO2(par))
|
|
return;
|
|
|
|
sst_write(BLTSRCBASEADDR, 0);
|
|
sst_write(BLTDSTBASEADDR, 0);
|
|
sst_write(BLTROP, BLTROP_COPY);
|
|
sst_write(BLTXYSTRIDES, stride | (stride << 16));
|
|
sst_write(BLTSRCXY, area->sx | (area->sy << 16));
|
|
sst_write(BLTDSTXY, area->dx | (area->dy << 16));
|
|
sst_write(BLTSIZE, area->width | (area->height << 16));
|
|
sst_write(BLTCOMMAND, BLT_SCR2SCR_BITBLT | LAUNCH_BITBLT |
|
|
(BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) );
|
|
sst_wait_idle();
|
|
}
|
|
#endif
|
|
|
|
|
|
/*
|
|
* FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
|
|
*/
|
|
#if 0
|
|
static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
u32 stride = info->fix.line_length;
|
|
|
|
if (!IS_VOODOO2(par))
|
|
return;
|
|
|
|
sst_write(BLTCLIPX, info->var.xres);
|
|
sst_write(BLTCLIPY, info->var.yres);
|
|
|
|
sst_write(BLTDSTBASEADDR, 0);
|
|
sst_write(BLTCOLOR, rect->color);
|
|
sst_write(BLTROP, rect->rop == ROP_COPY ? BLTROP_COPY : BLTROP_XOR);
|
|
sst_write(BLTXYSTRIDES, stride | (stride << 16));
|
|
sst_write(BLTDSTXY, rect->dx | (rect->dy << 16));
|
|
sst_write(BLTSIZE, rect->width | (rect->height << 16));
|
|
sst_write(BLTCOMMAND, BLT_RECFILL_BITBLT | LAUNCH_BITBLT
|
|
| (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) );
|
|
sst_wait_idle();
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
* get lfb size
|
|
*/
|
|
static int sst_get_memsize(struct fb_info *info, __u32 *memsize)
|
|
{
|
|
u8 __iomem *fbbase_virt = info->screen_base;
|
|
|
|
/* force memsize */
|
|
if (mem >= 1 && mem <= 4) {
|
|
*memsize = (mem * 0x100000);
|
|
printk(KERN_INFO "supplied memsize: %#x\n", *memsize);
|
|
return 1;
|
|
}
|
|
|
|
writel(0xdeadbeef, fbbase_virt);
|
|
writel(0xdeadbeef, fbbase_virt+0x100000);
|
|
writel(0xdeadbeef, fbbase_virt+0x200000);
|
|
f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
|
|
readl(fbbase_virt), readl(fbbase_virt + 0x100000),
|
|
readl(fbbase_virt + 0x200000));
|
|
|
|
writel(0xabcdef01, fbbase_virt);
|
|
|
|
f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
|
|
readl(fbbase_virt), readl(fbbase_virt + 0x100000),
|
|
readl(fbbase_virt + 0x200000));
|
|
|
|
/* checks for 4mb lfb, then 2, then defaults to 1 */
|
|
if (readl(fbbase_virt + 0x200000) == 0xdeadbeef)
|
|
*memsize = 0x400000;
|
|
else if (readl(fbbase_virt + 0x100000) == 0xdeadbeef)
|
|
*memsize = 0x200000;
|
|
else
|
|
*memsize = 0x100000;
|
|
f_ddprintk("detected memsize: %dMB\n", *memsize >> 20);
|
|
return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* DAC detection routines
|
|
*/
|
|
|
|
/* fbi should be idle, and fifo emty and mem disabled */
|
|
/* supposed to detect AT&T ATT20C409 and Ti TVP3409 ramdacs */
|
|
|
|
static int sst_detect_att(struct fb_info *info)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
int i, mir, dir;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
sst_dac_write(DACREG_WMA, 0); /* backdoor */
|
|
sst_dac_read(DACREG_RMR); /* read 4 times RMR */
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
/* the fifth time, CR0 is read */
|
|
sst_dac_read(DACREG_RMR);
|
|
/* the 6th, manufacturer id register */
|
|
mir = sst_dac_read(DACREG_RMR);
|
|
/*the 7th, device ID register */
|
|
dir = sst_dac_read(DACREG_RMR);
|
|
f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
|
|
if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) {
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sst_detect_ti(struct fb_info *info)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
int i, mir, dir;
|
|
|
|
for (i = 0; i<3; i++) {
|
|
sst_dac_write(DACREG_WMA, 0); /* backdoor */
|
|
sst_dac_read(DACREG_RMR); /* read 4 times RMR */
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
/* the fifth time, CR0 is read */
|
|
sst_dac_read(DACREG_RMR);
|
|
/* the 6th, manufacturer id register */
|
|
mir = sst_dac_read(DACREG_RMR);
|
|
/*the 7th, device ID register */
|
|
dir = sst_dac_read(DACREG_RMR);
|
|
f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
|
|
if ((mir == DACREG_MIR_TI ) && (dir == DACREG_DIR_TI)) {
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* try to detect ICS5342 ramdac
|
|
* we get the 1st byte (M value) of preset f1,f7 and fB
|
|
* why those 3 ? mmmh... for now, i'll do it the glide way...
|
|
* and ask questions later. anyway, it seems that all the freq registers are
|
|
* really at their default state (cf specs) so i ask again, why those 3 regs ?
|
|
* mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for
|
|
* pll programming, so in fact, we *hope* that the f1, f7 & fB won't be
|
|
* touched...
|
|
* is it really safe ? how can i reset this ramdac ? geee...
|
|
*/
|
|
static int sst_detect_ics(struct fb_info *info)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
int m_clk0_1, m_clk0_7, m_clk1_b;
|
|
int n_clk0_1, n_clk0_7, n_clk1_b;
|
|
int i;
|
|
|
|
for (i = 0; i<5; i++ ) {
|
|
sst_dac_write(DACREG_ICS_PLLRMA, 0x1); /* f1 */
|
|
m_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
|
|
n_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
|
|
sst_dac_write(DACREG_ICS_PLLRMA, 0x7); /* f7 */
|
|
m_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
|
|
n_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
|
|
sst_dac_write(DACREG_ICS_PLLRMA, 0xb); /* fB */
|
|
m_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
|
|
n_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
|
|
f_ddprintk("m_clk0_1: %#x, m_clk0_7: %#x, m_clk1_b: %#x\n",
|
|
m_clk0_1, m_clk0_7, m_clk1_b);
|
|
f_ddprintk("n_clk0_1: %#x, n_clk0_7: %#x, n_clk1_b: %#x\n",
|
|
n_clk0_1, n_clk0_7, n_clk1_b);
|
|
if (( m_clk0_1 == DACREG_ICS_PLL_CLK0_1_INI)
|
|
&& (m_clk0_7 == DACREG_ICS_PLL_CLK0_7_INI)
|
|
&& (m_clk1_b == DACREG_ICS_PLL_CLK1_B_INI)) {
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* gfx, video, pci fifo should be reset, dram refresh disabled
|
|
* see detect_dac
|
|
*/
|
|
|
|
static int sst_set_pll_att_ti(struct fb_info *info,
|
|
const struct pll_timing *t, const int clock)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
u8 cr0, cc;
|
|
|
|
/* enable indexed mode */
|
|
sst_dac_write(DACREG_WMA, 0); /* backdoor */
|
|
sst_dac_read(DACREG_RMR); /* 1 time: RMR */
|
|
sst_dac_read(DACREG_RMR); /* 2 RMR */
|
|
sst_dac_read(DACREG_RMR); /* 3 // */
|
|
sst_dac_read(DACREG_RMR); /* 4 // */
|
|
cr0 = sst_dac_read(DACREG_RMR); /* 5 CR0 */
|
|
|
|
sst_dac_write(DACREG_WMA, 0);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_write(DACREG_RMR, (cr0 & 0xf0)
|
|
| DACREG_CR0_EN_INDEXED
|
|
| DACREG_CR0_8BIT
|
|
| DACREG_CR0_PWDOWN );
|
|
/* so, now we are in indexed mode . dunno if its common, but
|
|
i find this way of doing things a little bit weird :p */
|
|
|
|
udelay(300);
|
|
cc = dac_i_read(DACREG_CC_I);
|
|
switch (clock) {
|
|
case VID_CLOCK:
|
|
dac_i_write(DACREG_AC0_I, t->m);
|
|
dac_i_write(DACREG_AC1_I, t->p << 6 | t->n);
|
|
dac_i_write(DACREG_CC_I,
|
|
(cc & 0x0f) | DACREG_CC_CLKA | DACREG_CC_CLKA_C);
|
|
break;
|
|
case GFX_CLOCK:
|
|
dac_i_write(DACREG_BD0_I, t->m);
|
|
dac_i_write(DACREG_BD1_I, t->p << 6 | t->n);
|
|
dac_i_write(DACREG_CC_I,
|
|
(cc & 0xf0) | DACREG_CC_CLKB | DACREG_CC_CLKB_D);
|
|
break;
|
|
default:
|
|
dprintk("%s: wrong clock code '%d'\n",
|
|
__func__, clock);
|
|
return 0;
|
|
}
|
|
udelay(300);
|
|
|
|
/* power up the dac & return to "normal" non-indexed mode */
|
|
dac_i_write(DACREG_CR0_I,
|
|
cr0 & ~DACREG_CR0_PWDOWN & ~DACREG_CR0_EN_INDEXED);
|
|
return 1;
|
|
}
|
|
|
|
static int sst_set_pll_ics(struct fb_info *info,
|
|
const struct pll_timing *t, const int clock)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
u8 pll_ctrl;
|
|
|
|
sst_dac_write(DACREG_ICS_PLLRMA, DACREG_ICS_PLL_CTRL);
|
|
pll_ctrl = sst_dac_read(DACREG_ICS_PLLDATA);
|
|
switch(clock) {
|
|
case VID_CLOCK:
|
|
sst_dac_write(DACREG_ICS_PLLWMA, 0x0); /* CLK0, f0 */
|
|
sst_dac_write(DACREG_ICS_PLLDATA, t->m);
|
|
sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
|
|
/* selects freq f0 for clock 0 */
|
|
sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
|
|
sst_dac_write(DACREG_ICS_PLLDATA,
|
|
(pll_ctrl & 0xd8)
|
|
| DACREG_ICS_CLK0
|
|
| DACREG_ICS_CLK0_0);
|
|
break;
|
|
case GFX_CLOCK :
|
|
sst_dac_write(DACREG_ICS_PLLWMA, 0xa); /* CLK1, fA */
|
|
sst_dac_write(DACREG_ICS_PLLDATA, t->m);
|
|
sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
|
|
/* selects freq fA for clock 1 */
|
|
sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
|
|
sst_dac_write(DACREG_ICS_PLLDATA,
|
|
(pll_ctrl & 0xef) | DACREG_ICS_CLK1_A);
|
|
break;
|
|
default:
|
|
dprintk("%s: wrong clock code '%d'\n",
|
|
__func__, clock);
|
|
return 0;
|
|
}
|
|
udelay(300);
|
|
return 1;
|
|
}
|
|
|
|
static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
u8 cr0;
|
|
|
|
sst_dac_write(DACREG_WMA, 0); /* backdoor */
|
|
sst_dac_read(DACREG_RMR); /* read 4 times RMR */
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
/* the fifth time, CR0 is read */
|
|
cr0 = sst_dac_read(DACREG_RMR);
|
|
|
|
sst_dac_write(DACREG_WMA, 0); /* backdoor */
|
|
sst_dac_read(DACREG_RMR); /* read 4 times RMR */
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
sst_dac_read(DACREG_RMR);
|
|
/* cr0 */
|
|
switch(bpp) {
|
|
case 16:
|
|
sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP);
|
|
break;
|
|
default:
|
|
dprintk("%s: bad depth '%u'\n", __func__, bpp);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
|
|
switch(bpp) {
|
|
case 16:
|
|
sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP);
|
|
break;
|
|
default:
|
|
dprintk("%s: bad depth '%u'\n", __func__, bpp);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* detect dac type
|
|
* prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset,
|
|
* dram refresh disabled, FbiInit remaped.
|
|
* TODO: mmh.. maybe i should put the "prerequisite" in the func ...
|
|
*/
|
|
|
|
|
|
static struct dac_switch dacs[] = {
|
|
{ .name = "TI TVP3409",
|
|
.detect = sst_detect_ti,
|
|
.set_pll = sst_set_pll_att_ti,
|
|
.set_vidmod = sst_set_vidmod_att_ti },
|
|
|
|
{ .name = "AT&T ATT20C409",
|
|
.detect = sst_detect_att,
|
|
.set_pll = sst_set_pll_att_ti,
|
|
.set_vidmod = sst_set_vidmod_att_ti },
|
|
{ .name = "ICS ICS5342",
|
|
.detect = sst_detect_ics,
|
|
.set_pll = sst_set_pll_ics,
|
|
.set_vidmod = sst_set_vidmod_ics },
|
|
};
|
|
|
|
static int sst_detect_dactype(struct fb_info *info, struct sstfb_par *par)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dacs); i++) {
|
|
ret = dacs[i].detect(info);
|
|
if (ret)
|
|
break;
|
|
}
|
|
if (!ret)
|
|
return 0;
|
|
f_dprintk("%s found %s\n", __func__, dacs[i].name);
|
|
par->dac_sw = dacs[i];
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Internal Routines
|
|
*/
|
|
static int sst_init(struct fb_info *info, struct sstfb_par *par)
|
|
{
|
|
u32 fbiinit0, fbiinit1, fbiinit4;
|
|
struct pci_dev *dev = par->dev;
|
|
struct pll_timing gfx_timings;
|
|
struct sst_spec *spec;
|
|
int Fout;
|
|
int gfx_clock;
|
|
|
|
spec = &voodoo_spec[par->type];
|
|
f_ddprintk(" fbiinit0 fbiinit1 fbiinit2 fbiinit3 fbiinit4 "
|
|
" fbiinit6\n");
|
|
f_ddprintk("%0#10x %0#10x %0#10x %0#10x %0#10x %0#10x\n",
|
|
sst_read(FBIINIT0), sst_read(FBIINIT1), sst_read(FBIINIT2),
|
|
sst_read(FBIINIT3), sst_read(FBIINIT4), sst_read(FBIINIT6));
|
|
/* disable video clock */
|
|
pci_write_config_dword(dev, PCI_VCLK_DISABLE, 0);
|
|
|
|
/* enable writing to init registers, disable pci fifo */
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
|
|
/* reset video */
|
|
sst_set_bits(FBIINIT1, VIDEO_RESET);
|
|
sst_wait_idle();
|
|
/* reset gfx + pci fifo */
|
|
sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
|
|
sst_wait_idle();
|
|
|
|
/* unreset fifo */
|
|
/*sst_unset_bits(FBIINIT0, FIFO_RESET);
|
|
sst_wait_idle();*/
|
|
/* unreset FBI */
|
|
/*sst_unset_bits(FBIINIT0, FBI_RESET);
|
|
sst_wait_idle();*/
|
|
|
|
/* disable dram refresh */
|
|
sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
|
|
sst_wait_idle();
|
|
/* remap fbinit2/3 to dac */
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE,
|
|
PCI_EN_INIT_WR | PCI_REMAP_DAC );
|
|
/* detect dac type */
|
|
if (!sst_detect_dactype(info, par)) {
|
|
printk(KERN_ERR "sstfb: unknown dac type.\n");
|
|
//FIXME watch it: we are not in a safe state, bad bad bad.
|
|
return 0;
|
|
}
|
|
|
|
/* set graphic clock */
|
|
gfx_clock = spec->default_gfx_clock;
|
|
if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
|
|
printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
|
|
gfx_clock = gfxclk *1000;
|
|
} else if (gfxclk) {
|
|
printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
|
|
}
|
|
|
|
sst_calc_pll(gfx_clock, &Fout, &gfx_timings);
|
|
par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
|
|
|
|
/* disable fbiinit remap */
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE,
|
|
PCI_EN_INIT_WR| PCI_EN_FIFO_WR );
|
|
/* defaults init registers */
|
|
/* FbiInit0: unreset gfx, unreset fifo */
|
|
fbiinit0 = FBIINIT0_DEFAULT;
|
|
fbiinit1 = FBIINIT1_DEFAULT;
|
|
fbiinit4 = FBIINIT4_DEFAULT;
|
|
par->vgapass = vgapass;
|
|
if (par->vgapass)
|
|
fbiinit0 &= ~DIS_VGA_PASSTHROUGH;
|
|
else
|
|
fbiinit0 |= DIS_VGA_PASSTHROUGH;
|
|
if (slowpci) {
|
|
fbiinit1 |= SLOW_PCI_WRITES;
|
|
fbiinit4 |= SLOW_PCI_READS;
|
|
} else {
|
|
fbiinit1 &= ~SLOW_PCI_WRITES;
|
|
fbiinit4 &= ~SLOW_PCI_READS;
|
|
}
|
|
sst_write(FBIINIT0, fbiinit0);
|
|
sst_wait_idle();
|
|
sst_write(FBIINIT1, fbiinit1);
|
|
sst_wait_idle();
|
|
sst_write(FBIINIT2, FBIINIT2_DEFAULT);
|
|
sst_wait_idle();
|
|
sst_write(FBIINIT3, FBIINIT3_DEFAULT);
|
|
sst_wait_idle();
|
|
sst_write(FBIINIT4, fbiinit4);
|
|
sst_wait_idle();
|
|
if (IS_VOODOO2(par)) {
|
|
sst_write(FBIINIT6, FBIINIT6_DEFAULT);
|
|
sst_wait_idle();
|
|
}
|
|
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
|
|
pci_write_config_dword(dev, PCI_VCLK_ENABLE, 0);
|
|
return 1;
|
|
}
|
|
|
|
static void sst_shutdown(struct fb_info *info)
|
|
{
|
|
struct sstfb_par *par = info->par;
|
|
struct pci_dev *dev = par->dev;
|
|
struct pll_timing gfx_timings;
|
|
int Fout;
|
|
|
|
/* reset video, gfx, fifo, disable dram + remap fbiinit2/3 */
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
|
|
sst_set_bits(FBIINIT1, VIDEO_RESET | EN_BLANKING);
|
|
sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
|
|
sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
|
|
sst_wait_idle();
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE,
|
|
PCI_EN_INIT_WR | PCI_REMAP_DAC);
|
|
/* set 20Mhz gfx clock */
|
|
sst_calc_pll(20000, &Fout, &gfx_timings);
|
|
par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
|
|
/* TODO maybe shutdown the dac, vrefresh and so on... */
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE,
|
|
PCI_EN_INIT_WR);
|
|
sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH);
|
|
pci_write_config_dword(dev, PCI_VCLK_DISABLE,0);
|
|
/* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct
|
|
* from start ? */
|
|
pci_write_config_dword(dev, PCI_INIT_ENABLE, 0);
|
|
|
|
}
|
|
|
|
/*
|
|
* Interface to the world
|
|
*/
|
|
static int sstfb_setup(char *options)
|
|
{
|
|
char *this_opt;
|
|
|
|
if (!options || !*options)
|
|
return 0;
|
|
|
|
while ((this_opt = strsep(&options, ",")) != NULL) {
|
|
if (!*this_opt) continue;
|
|
|
|
f_ddprintk("option %s\n", this_opt);
|
|
|
|
if (!strcmp(this_opt, "vganopass"))
|
|
vgapass = 0;
|
|
else if (!strcmp(this_opt, "vgapass"))
|
|
vgapass = 1;
|
|
else if (!strcmp(this_opt, "clipping"))
|
|
clipping = 1;
|
|
else if (!strcmp(this_opt, "noclipping"))
|
|
clipping = 0;
|
|
else if (!strcmp(this_opt, "fastpci"))
|
|
slowpci = 0;
|
|
else if (!strcmp(this_opt, "slowpci"))
|
|
slowpci = 1;
|
|
else if (!strncmp(this_opt, "mem:",4))
|
|
mem = simple_strtoul (this_opt+4, NULL, 0);
|
|
else if (!strncmp(this_opt, "gfxclk:",7))
|
|
gfxclk = simple_strtoul (this_opt+7, NULL, 0);
|
|
else
|
|
mode_option = this_opt;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct fb_ops sstfb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = sstfb_check_var,
|
|
.fb_set_par = sstfb_set_par,
|
|
.fb_setcolreg = sstfb_setcolreg,
|
|
.fb_fillrect = cfb_fillrect, /* sstfb_fillrect */
|
|
.fb_copyarea = cfb_copyarea, /* sstfb_copyarea */
|
|
.fb_imageblit = cfb_imageblit,
|
|
.fb_ioctl = sstfb_ioctl,
|
|
};
|
|
|
|
static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct fb_info *info;
|
|
struct fb_fix_screeninfo *fix;
|
|
struct sstfb_par *par;
|
|
struct sst_spec *spec;
|
|
int err;
|
|
|
|
/* Enable device in PCI config. */
|
|
if ((err=pci_enable_device(pdev))) {
|
|
printk(KERN_ERR "cannot enable device\n");
|
|
return err;
|
|
}
|
|
|
|
/* Allocate the fb and par structures. */
|
|
info = framebuffer_alloc(sizeof(struct sstfb_par), &pdev->dev);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
pci_set_drvdata(pdev, info);
|
|
|
|
par = info->par;
|
|
fix = &info->fix;
|
|
|
|
par->type = id->driver_data;
|
|
spec = &voodoo_spec[par->type];
|
|
f_ddprintk("found device : %s\n", spec->name);
|
|
|
|
par->dev = pdev;
|
|
par->revision = pdev->revision;
|
|
|
|
fix->mmio_start = pci_resource_start(pdev,0);
|
|
fix->mmio_len = 0x400000;
|
|
fix->smem_start = fix->mmio_start + 0x400000;
|
|
|
|
if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) {
|
|
printk(KERN_ERR "sstfb: cannot reserve mmio memory\n");
|
|
goto fail_mmio_mem;
|
|
}
|
|
|
|
if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) {
|
|
printk(KERN_ERR "sstfb: cannot reserve fb memory\n");
|
|
goto fail_fb_mem;
|
|
}
|
|
|
|
par->mmio_vbase = ioremap(fix->mmio_start,
|
|
fix->mmio_len);
|
|
if (!par->mmio_vbase) {
|
|
printk(KERN_ERR "sstfb: cannot remap register area %#lx\n",
|
|
fix->mmio_start);
|
|
goto fail_mmio_remap;
|
|
}
|
|
info->screen_base = ioremap(fix->smem_start, 0x400000);
|
|
if (!info->screen_base) {
|
|
printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n",
|
|
fix->smem_start);
|
|
goto fail_fb_remap;
|
|
}
|
|
|
|
if (!sst_init(info, par)) {
|
|
printk(KERN_ERR "sstfb: Init failed\n");
|
|
goto fail;
|
|
}
|
|
sst_get_memsize(info, &fix->smem_len);
|
|
strlcpy(fix->id, spec->name, sizeof(fix->id));
|
|
|
|
printk(KERN_INFO "%s (revision %d) with %s dac\n",
|
|
fix->id, par->revision, par->dac_sw.name);
|
|
printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
|
|
fix->smem_start, info->screen_base,
|
|
fix->smem_len >> 20);
|
|
|
|
f_ddprintk("regbase_virt: %#lx\n", par->mmio_vbase);
|
|
f_ddprintk("membase_phys: %#lx\n", fix->smem_start);
|
|
f_ddprintk("fbbase_virt: %p\n", info->screen_base);
|
|
|
|
info->flags = FBINFO_DEFAULT;
|
|
info->fbops = &sstfb_ops;
|
|
info->pseudo_palette = par->palette;
|
|
|
|
fix->type = FB_TYPE_PACKED_PIXELS;
|
|
fix->visual = FB_VISUAL_TRUECOLOR;
|
|
fix->accel = FB_ACCEL_NONE; /* FIXME */
|
|
/*
|
|
* According to the specs, the linelength must be of 1024 *pixels*
|
|
* and the 24bpp mode is in fact a 32 bpp mode (and both are in
|
|
* fact dithered to 16bit).
|
|
*/
|
|
fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
|
|
|
|
fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16);
|
|
|
|
if (sstfb_check_var(&info->var, info)) {
|
|
printk(KERN_ERR "sstfb: invalid video mode.\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (sstfb_set_par(info)) {
|
|
printk(KERN_ERR "sstfb: can't set default video mode.\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (fb_alloc_cmap(&info->cmap, 256, 0)) {
|
|
printk(KERN_ERR "sstfb: can't alloc cmap memory.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* register fb */
|
|
info->device = &pdev->dev;
|
|
if (register_framebuffer(info) < 0) {
|
|
printk(KERN_ERR "sstfb: can't register framebuffer.\n");
|
|
goto fail_register;
|
|
}
|
|
|
|
sstfb_clear_screen(info);
|
|
|
|
if (device_create_file(info->dev, &device_attrs[0]))
|
|
printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
|
|
|
|
|
|
fb_info(info, "%s frame buffer device at 0x%p\n",
|
|
fix->id, info->screen_base);
|
|
|
|
return 0;
|
|
|
|
fail_register:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
fail:
|
|
iounmap(info->screen_base);
|
|
fail_fb_remap:
|
|
iounmap(par->mmio_vbase);
|
|
fail_mmio_remap:
|
|
release_mem_region(fix->smem_start, 0x400000);
|
|
fail_fb_mem:
|
|
release_mem_region(fix->mmio_start, info->fix.mmio_len);
|
|
fail_mmio_mem:
|
|
framebuffer_release(info);
|
|
return -ENXIO; /* no voodoo detected */
|
|
}
|
|
|
|
static void sstfb_remove(struct pci_dev *pdev)
|
|
{
|
|
struct sstfb_par *par;
|
|
struct fb_info *info;
|
|
|
|
info = pci_get_drvdata(pdev);
|
|
par = info->par;
|
|
|
|
device_remove_file(info->dev, &device_attrs[0]);
|
|
sst_shutdown(info);
|
|
iounmap(info->screen_base);
|
|
iounmap(par->mmio_vbase);
|
|
release_mem_region(info->fix.smem_start, 0x400000);
|
|
release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
|
|
fb_dealloc_cmap(&info->cmap);
|
|
unregister_framebuffer(info);
|
|
framebuffer_release(info);
|
|
}
|
|
|
|
|
|
static const struct pci_device_id sstfb_id_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ),
|
|
.driver_data = ID_VOODOO1, },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2),
|
|
.driver_data = ID_VOODOO2, },
|
|
{ 0 },
|
|
};
|
|
|
|
static struct pci_driver sstfb_driver = {
|
|
.name = "sstfb",
|
|
.id_table = sstfb_id_tbl,
|
|
.probe = sstfb_probe,
|
|
.remove = sstfb_remove,
|
|
};
|
|
|
|
|
|
static int sstfb_init(void)
|
|
{
|
|
char *option = NULL;
|
|
|
|
if (fb_get_options("sstfb", &option))
|
|
return -ENODEV;
|
|
sstfb_setup(option);
|
|
|
|
return pci_register_driver(&sstfb_driver);
|
|
}
|
|
|
|
static void sstfb_exit(void)
|
|
{
|
|
pci_unregister_driver(&sstfb_driver);
|
|
}
|
|
|
|
|
|
module_init(sstfb_init);
|
|
module_exit(sstfb_exit);
|
|
|
|
MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>");
|
|
MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(mem, int, 0);
|
|
MODULE_PARM_DESC(mem, "Size of frame buffer memory in MB (1, 2, 4 MB, default=autodetect)");
|
|
module_param(vgapass, bool, 0);
|
|
MODULE_PARM_DESC(vgapass, "Enable VGA PassThrough mode (0 or 1) (default=0)");
|
|
module_param(clipping, bool, 0);
|
|
MODULE_PARM_DESC(clipping, "Enable clipping (slower, safer) (0 or 1) (default=1)");
|
|
module_param(gfxclk, int, 0);
|
|
MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
|
|
module_param(slowpci, bool, 0);
|
|
MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
|
|
module_param(mode_option, charp, 0);
|
|
MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")");
|
|
|