linux/drivers/hid/usbhid/usbhid.h
Alan Stern 0ede76fcec USB: remove uses of URB_NO_SETUP_DMA_MAP
This patch (as1350) removes all usages of coherent buffers for USB
control-request setup-packet buffers.  There's no good reason to
reserve coherent memory for these things; control requests are hardly
ever used in large quantity (the major exception is firmware
transfers, and they aren't time-critical).  Furthermore, only seven
drivers used it.  We might as well always use streaming DMA mappings
for setup-packet buffers, and remove some extra complexity from
usbcore.

The DMA-mapping portion of hcd.c is currently in flux.  A separate
patch will be submitted to remove support for URB_NO_SETUP_DMA_MAP
after everything else settles down.  The removal should go smoothly,
as by then nobody will be using it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:31 -07:00

107 lines
4.4 KiB
C

#ifndef __USBHID_H
#define __USBHID_H
/*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006 Jiri Kosina
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/timer.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/input.h>
/* API provided by hid-core.c for USB HID drivers */
int usbhid_wait_io(struct hid_device* hid);
void usbhid_close(struct hid_device *hid);
int usbhid_open(struct hid_device *hid);
void usbhid_init_reports(struct hid_device *hid);
void usbhid_submit_report
(struct hid_device *hid, struct hid_report *report, unsigned char dir);
int usbhid_get_power(struct hid_device *hid);
void usbhid_put_power(struct hid_device *hid);
/* iofl flags */
#define HID_CTRL_RUNNING 1
#define HID_OUT_RUNNING 2
#define HID_IN_RUNNING 3
#define HID_RESET_PENDING 4
#define HID_SUSPENDED 5
#define HID_CLEAR_HALT 6
#define HID_DISCONNECTED 7
#define HID_STARTED 8
#define HID_REPORTED_IDLE 9
#define HID_KEYS_PRESSED 10
#define HID_LED_ON 11
/*
* USB-specific HID struct, to be pointed to
* from struct hid_device->driver_data
*/
struct usbhid_device {
struct hid_device *hid; /* pointer to corresponding HID dev */
struct usb_interface *intf; /* USB interface */
int ifnum; /* USB interface number */
unsigned int bufsize; /* URB buffer size */
struct urb *urbin; /* Input URB */
char *inbuf; /* Input buffer */
dma_addr_t inbuf_dma; /* Input buffer dma */
struct urb *urbctrl; /* Control URB */
struct usb_ctrlrequest *cr; /* Control request struct */
struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE]; /* Control fifo */
unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
char *ctrlbuf; /* Control buffer */
dma_addr_t ctrlbuf_dma; /* Control buffer dma */
unsigned long last_ctrl; /* record of last output for timeouts */
struct urb *urbout; /* Output URB */
struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
unsigned char outhead, outtail; /* Output pipe fifo head & tail */
char *outbuf; /* Output buffer */
dma_addr_t outbuf_dma; /* Output buffer dma */
unsigned long last_out; /* record of last output for timeouts */
spinlock_t lock; /* fifo spinlock */
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
unsigned int retry_delay; /* Delay length in ms */
struct work_struct reset_work; /* Task context for resets */
struct work_struct restart_work; /* waking up for output to be done in a task */
wait_queue_head_t wait; /* For sleeping */
int ledcount; /* counting the number of active leds */
};
#define hid_to_usb_dev(hid_dev) \
container_of(hid_dev->dev.parent->parent, struct usb_device, dev)
#endif