mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 18:44:44 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
546 lines
14 KiB
C
546 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* drivers/media/radio/si470x/radio-si470x-i2c.c
|
|
*
|
|
* I2C driver for radios with Silicon Labs Si470x FM Radio Receivers
|
|
*
|
|
* Copyright (c) 2009 Samsung Electronics Co.Ltd
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*/
|
|
|
|
|
|
/* driver definitions */
|
|
#define DRIVER_AUTHOR "Joonyoung Shim <jy0922.shim@samsung.com>";
|
|
#define DRIVER_CARD "Silicon Labs Si470x FM Radio"
|
|
#define DRIVER_DESC "I2C radio driver for Si470x FM Radio Receivers"
|
|
#define DRIVER_VERSION "1.0.2"
|
|
|
|
/* kernel includes */
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include "radio-si470x.h"
|
|
|
|
|
|
/* I2C Device ID List */
|
|
static const struct i2c_device_id si470x_i2c_id[] = {
|
|
/* Generic Entry */
|
|
{ "si470x", 0 },
|
|
/* Terminating entry */
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, si470x_i2c_id);
|
|
|
|
|
|
/**************************************************************************
|
|
* Module Parameters
|
|
**************************************************************************/
|
|
|
|
/* Radio Nr */
|
|
static int radio_nr = -1;
|
|
module_param(radio_nr, int, 0444);
|
|
MODULE_PARM_DESC(radio_nr, "Radio Nr");
|
|
|
|
/* RDS buffer blocks */
|
|
static unsigned int rds_buf = 100;
|
|
module_param(rds_buf, uint, 0444);
|
|
MODULE_PARM_DESC(rds_buf, "RDS buffer entries: *100*");
|
|
|
|
/* RDS maximum block errors */
|
|
static unsigned short max_rds_errors = 1;
|
|
/* 0 means 0 errors requiring correction */
|
|
/* 1 means 1-2 errors requiring correction (used by original USBRadio.exe) */
|
|
/* 2 means 3-5 errors requiring correction */
|
|
/* 3 means 6+ errors or errors in checkword, correction not possible */
|
|
module_param(max_rds_errors, ushort, 0644);
|
|
MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*");
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
* I2C Definitions
|
|
**************************************************************************/
|
|
|
|
/* Write starts with the upper byte of register 0x02 */
|
|
#define WRITE_REG_NUM 8
|
|
#define WRITE_INDEX(i) (i + 0x02)
|
|
|
|
/* Read starts with the upper byte of register 0x0a */
|
|
#define READ_REG_NUM RADIO_REGISTER_NUM
|
|
#define READ_INDEX(i) ((i + RADIO_REGISTER_NUM - 0x0a) % READ_REG_NUM)
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
* General Driver Functions - REGISTERs
|
|
**************************************************************************/
|
|
|
|
/*
|
|
* si470x_get_register - read register
|
|
*/
|
|
static int si470x_get_register(struct si470x_device *radio, int regnr)
|
|
{
|
|
__be16 buf[READ_REG_NUM];
|
|
struct i2c_msg msgs[1] = {
|
|
{
|
|
.addr = radio->client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = sizeof(u16) * READ_REG_NUM,
|
|
.buf = (void *)buf
|
|
},
|
|
};
|
|
|
|
if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
|
|
return -EIO;
|
|
|
|
radio->registers[regnr] = __be16_to_cpu(buf[READ_INDEX(regnr)]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* si470x_set_register - write register
|
|
*/
|
|
static int si470x_set_register(struct si470x_device *radio, int regnr)
|
|
{
|
|
int i;
|
|
__be16 buf[WRITE_REG_NUM];
|
|
struct i2c_msg msgs[1] = {
|
|
{
|
|
.addr = radio->client->addr,
|
|
.len = sizeof(u16) * WRITE_REG_NUM,
|
|
.buf = (void *)buf
|
|
},
|
|
};
|
|
|
|
for (i = 0; i < WRITE_REG_NUM; i++)
|
|
buf[i] = __cpu_to_be16(radio->registers[WRITE_INDEX(i)]);
|
|
|
|
if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
* General Driver Functions - ENTIRE REGISTERS
|
|
**************************************************************************/
|
|
|
|
/*
|
|
* si470x_get_all_registers - read entire registers
|
|
*/
|
|
static int si470x_get_all_registers(struct si470x_device *radio)
|
|
{
|
|
int i;
|
|
__be16 buf[READ_REG_NUM];
|
|
struct i2c_msg msgs[1] = {
|
|
{
|
|
.addr = radio->client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = sizeof(u16) * READ_REG_NUM,
|
|
.buf = (void *)buf
|
|
},
|
|
};
|
|
|
|
if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
|
|
return -EIO;
|
|
|
|
for (i = 0; i < READ_REG_NUM; i++)
|
|
radio->registers[i] = __be16_to_cpu(buf[READ_INDEX(i)]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
* File Operations Interface
|
|
**************************************************************************/
|
|
|
|
/*
|
|
* si470x_fops_open - file open
|
|
*/
|
|
static int si470x_fops_open(struct file *file)
|
|
{
|
|
struct si470x_device *radio = video_drvdata(file);
|
|
int retval = v4l2_fh_open(file);
|
|
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (v4l2_fh_is_singular_file(file)) {
|
|
/* start radio */
|
|
retval = si470x_start(radio);
|
|
if (retval < 0)
|
|
goto done;
|
|
|
|
/* enable RDS / STC interrupt */
|
|
radio->registers[SYSCONFIG1] |= SYSCONFIG1_RDSIEN;
|
|
radio->registers[SYSCONFIG1] |= SYSCONFIG1_STCIEN;
|
|
radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_GPIO2;
|
|
radio->registers[SYSCONFIG1] |= 0x1 << 2;
|
|
retval = si470x_set_register(radio, SYSCONFIG1);
|
|
}
|
|
|
|
done:
|
|
if (retval)
|
|
v4l2_fh_release(file);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*
|
|
* si470x_fops_release - file release
|
|
*/
|
|
static int si470x_fops_release(struct file *file)
|
|
{
|
|
struct si470x_device *radio = video_drvdata(file);
|
|
|
|
if (v4l2_fh_is_singular_file(file))
|
|
/* stop radio */
|
|
si470x_stop(radio);
|
|
|
|
return v4l2_fh_release(file);
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
* Video4Linux Interface
|
|
**************************************************************************/
|
|
|
|
/*
|
|
* si470x_vidioc_querycap - query device capabilities
|
|
*/
|
|
static int si470x_vidioc_querycap(struct file *file, void *priv,
|
|
struct v4l2_capability *capability)
|
|
{
|
|
strscpy(capability->driver, DRIVER_NAME, sizeof(capability->driver));
|
|
strscpy(capability->card, DRIVER_CARD, sizeof(capability->card));
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
* I2C Interface
|
|
**************************************************************************/
|
|
|
|
/*
|
|
* si470x_i2c_interrupt - interrupt handler
|
|
*/
|
|
static irqreturn_t si470x_i2c_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct si470x_device *radio = dev_id;
|
|
unsigned char regnr;
|
|
unsigned char blocknum;
|
|
unsigned short bler; /* rds block errors */
|
|
unsigned short rds;
|
|
unsigned char tmpbuf[3];
|
|
int retval = 0;
|
|
|
|
/* check Seek/Tune Complete */
|
|
retval = si470x_get_register(radio, STATUSRSSI);
|
|
if (retval < 0)
|
|
goto end;
|
|
|
|
if (radio->registers[STATUSRSSI] & STATUSRSSI_STC)
|
|
complete(&radio->completion);
|
|
|
|
/* safety checks */
|
|
if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0)
|
|
goto end;
|
|
|
|
/* Update RDS registers */
|
|
for (regnr = 1; regnr < RDS_REGISTER_NUM; regnr++) {
|
|
retval = si470x_get_register(radio, STATUSRSSI + regnr);
|
|
if (retval < 0)
|
|
goto end;
|
|
}
|
|
|
|
/* get rds blocks */
|
|
if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0)
|
|
/* No RDS group ready, better luck next time */
|
|
goto end;
|
|
|
|
for (blocknum = 0; blocknum < 4; blocknum++) {
|
|
switch (blocknum) {
|
|
default:
|
|
bler = (radio->registers[STATUSRSSI] &
|
|
STATUSRSSI_BLERA) >> 9;
|
|
rds = radio->registers[RDSA];
|
|
break;
|
|
case 1:
|
|
bler = (radio->registers[READCHAN] &
|
|
READCHAN_BLERB) >> 14;
|
|
rds = radio->registers[RDSB];
|
|
break;
|
|
case 2:
|
|
bler = (radio->registers[READCHAN] &
|
|
READCHAN_BLERC) >> 12;
|
|
rds = radio->registers[RDSC];
|
|
break;
|
|
case 3:
|
|
bler = (radio->registers[READCHAN] &
|
|
READCHAN_BLERD) >> 10;
|
|
rds = radio->registers[RDSD];
|
|
break;
|
|
}
|
|
|
|
/* Fill the V4L2 RDS buffer */
|
|
put_unaligned_le16(rds, &tmpbuf);
|
|
tmpbuf[2] = blocknum; /* offset name */
|
|
tmpbuf[2] |= blocknum << 3; /* received offset */
|
|
if (bler > max_rds_errors)
|
|
tmpbuf[2] |= 0x80; /* uncorrectable errors */
|
|
else if (bler > 0)
|
|
tmpbuf[2] |= 0x40; /* corrected error(s) */
|
|
|
|
/* copy RDS block to internal buffer */
|
|
memcpy(&radio->buffer[radio->wr_index], &tmpbuf, 3);
|
|
radio->wr_index += 3;
|
|
|
|
/* wrap write pointer */
|
|
if (radio->wr_index >= radio->buf_size)
|
|
radio->wr_index = 0;
|
|
|
|
/* check for overflow */
|
|
if (radio->wr_index == radio->rd_index) {
|
|
/* increment and wrap read pointer */
|
|
radio->rd_index += 3;
|
|
if (radio->rd_index >= radio->buf_size)
|
|
radio->rd_index = 0;
|
|
}
|
|
}
|
|
|
|
if (radio->wr_index != radio->rd_index)
|
|
wake_up_interruptible(&radio->read_queue);
|
|
|
|
end:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
/*
|
|
* si470x_i2c_probe - probe for the device
|
|
*/
|
|
static int si470x_i2c_probe(struct i2c_client *client)
|
|
{
|
|
struct si470x_device *radio;
|
|
int retval = 0;
|
|
|
|
/* private data allocation and initialization */
|
|
radio = devm_kzalloc(&client->dev, sizeof(*radio), GFP_KERNEL);
|
|
if (!radio) {
|
|
retval = -ENOMEM;
|
|
goto err_initial;
|
|
}
|
|
|
|
radio->client = client;
|
|
radio->band = 1; /* Default to 76 - 108 MHz */
|
|
mutex_init(&radio->lock);
|
|
init_completion(&radio->completion);
|
|
|
|
radio->get_register = si470x_get_register;
|
|
radio->set_register = si470x_set_register;
|
|
radio->fops_open = si470x_fops_open;
|
|
radio->fops_release = si470x_fops_release;
|
|
radio->vidioc_querycap = si470x_vidioc_querycap;
|
|
|
|
retval = v4l2_device_register(&client->dev, &radio->v4l2_dev);
|
|
if (retval < 0) {
|
|
dev_err(&client->dev, "couldn't register v4l2_device\n");
|
|
goto err_initial;
|
|
}
|
|
|
|
v4l2_ctrl_handler_init(&radio->hdl, 2);
|
|
v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
|
|
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
|
|
v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
|
|
V4L2_CID_AUDIO_VOLUME, 0, 15, 1, 15);
|
|
if (radio->hdl.error) {
|
|
retval = radio->hdl.error;
|
|
dev_err(&client->dev, "couldn't register control\n");
|
|
goto err_all;
|
|
}
|
|
|
|
/* video device initialization */
|
|
radio->videodev = si470x_viddev_template;
|
|
radio->videodev.ctrl_handler = &radio->hdl;
|
|
radio->videodev.lock = &radio->lock;
|
|
radio->videodev.v4l2_dev = &radio->v4l2_dev;
|
|
radio->videodev.release = video_device_release_empty;
|
|
radio->videodev.device_caps =
|
|
V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_READWRITE | V4L2_CAP_TUNER |
|
|
V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE;
|
|
video_set_drvdata(&radio->videodev, radio);
|
|
|
|
radio->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(radio->gpio_reset)) {
|
|
retval = PTR_ERR(radio->gpio_reset);
|
|
dev_err(&client->dev, "Failed to request gpio: %d\n", retval);
|
|
goto err_all;
|
|
}
|
|
|
|
if (radio->gpio_reset)
|
|
gpiod_set_value(radio->gpio_reset, 1);
|
|
|
|
/* power up : need 110ms */
|
|
radio->registers[POWERCFG] = POWERCFG_ENABLE;
|
|
if (si470x_set_register(radio, POWERCFG) < 0) {
|
|
retval = -EIO;
|
|
goto err_all;
|
|
}
|
|
msleep(110);
|
|
|
|
/* get device and chip versions */
|
|
if (si470x_get_all_registers(radio) < 0) {
|
|
retval = -EIO;
|
|
goto err_all;
|
|
}
|
|
dev_info(&client->dev, "DeviceID=0x%4.4hx ChipID=0x%4.4hx\n",
|
|
radio->registers[DEVICEID], radio->registers[SI_CHIPID]);
|
|
if ((radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE) < RADIO_FW_VERSION) {
|
|
dev_warn(&client->dev,
|
|
"This driver is known to work with firmware version %u, but the device has firmware version %u.\n"
|
|
"If you have some trouble using this driver, please report to V4L ML at linux-media@vger.kernel.org\n",
|
|
RADIO_FW_VERSION,
|
|
radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE);
|
|
}
|
|
|
|
/* set initial frequency */
|
|
si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
|
|
|
|
/* rds buffer allocation */
|
|
radio->buf_size = rds_buf * 3;
|
|
radio->buffer = devm_kmalloc(&client->dev, radio->buf_size, GFP_KERNEL);
|
|
if (!radio->buffer) {
|
|
retval = -EIO;
|
|
goto err_all;
|
|
}
|
|
|
|
/* rds buffer configuration */
|
|
radio->wr_index = 0;
|
|
radio->rd_index = 0;
|
|
init_waitqueue_head(&radio->read_queue);
|
|
|
|
retval = devm_request_threaded_irq(&client->dev, client->irq, NULL,
|
|
si470x_i2c_interrupt,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
DRIVER_NAME, radio);
|
|
if (retval) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
goto err_all;
|
|
}
|
|
|
|
/* register video device */
|
|
retval = video_register_device(&radio->videodev, VFL_TYPE_RADIO,
|
|
radio_nr);
|
|
if (retval) {
|
|
dev_warn(&client->dev, "Could not register video device\n");
|
|
goto err_all;
|
|
}
|
|
i2c_set_clientdata(client, radio);
|
|
|
|
return 0;
|
|
err_all:
|
|
v4l2_ctrl_handler_free(&radio->hdl);
|
|
v4l2_device_unregister(&radio->v4l2_dev);
|
|
err_initial:
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*
|
|
* si470x_i2c_remove - remove the device
|
|
*/
|
|
static void si470x_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct si470x_device *radio = i2c_get_clientdata(client);
|
|
|
|
video_unregister_device(&radio->videodev);
|
|
|
|
if (radio->gpio_reset)
|
|
gpiod_set_value(radio->gpio_reset, 0);
|
|
|
|
v4l2_ctrl_handler_free(&radio->hdl);
|
|
v4l2_device_unregister(&radio->v4l2_dev);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* si470x_i2c_suspend - suspend the device
|
|
*/
|
|
static int si470x_i2c_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct si470x_device *radio = i2c_get_clientdata(client);
|
|
|
|
/* power down */
|
|
radio->registers[POWERCFG] |= POWERCFG_DISABLE;
|
|
if (si470x_set_register(radio, POWERCFG) < 0)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* si470x_i2c_resume - resume the device
|
|
*/
|
|
static int si470x_i2c_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct si470x_device *radio = i2c_get_clientdata(client);
|
|
|
|
/* power up : need 110ms */
|
|
radio->registers[POWERCFG] |= POWERCFG_ENABLE;
|
|
if (si470x_set_register(radio, POWERCFG) < 0)
|
|
return -EIO;
|
|
msleep(110);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(si470x_i2c_pm, si470x_i2c_suspend, si470x_i2c_resume);
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id si470x_of_match[] = {
|
|
{ .compatible = "silabs,si470x" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, si470x_of_match);
|
|
#endif
|
|
|
|
/*
|
|
* si470x_i2c_driver - i2c driver interface
|
|
*/
|
|
static struct i2c_driver si470x_i2c_driver = {
|
|
.driver = {
|
|
.name = "si470x",
|
|
.of_match_table = of_match_ptr(si470x_of_match),
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.pm = &si470x_i2c_pm,
|
|
#endif
|
|
},
|
|
.probe_new = si470x_i2c_probe,
|
|
.remove = si470x_i2c_remove,
|
|
.id_table = si470x_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(si470x_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_VERSION(DRIVER_VERSION);
|