linux/drivers/scsi/qedi/qedi_iscsi.h
Mike Christie b40f3894e3 scsi: qedi: Complete TMF works before disconnect
We need to make sure that abort and reset completion work has completed
before ep_disconnect returns. After ep_disconnect we can't manipulate
cmds because libiscsi will call conn_stop and take onwership.

We are trying to make sure abort work and reset completion work has
completed before we do the cmd clean up in ep_disconnect. The problem is
that:

 1. the work function sets the QEDI_CONN_FW_CLEANUP bit, so if the work was
    still pending we would not see the bit set. We need to do this before
    the work is queued.

 2. If we had multiple works queued then we could break from the loop in
    qedi_ep_disconnect early because when abort work 1 completes it could
    clear QEDI_CONN_FW_CLEANUP. qedi_ep_disconnect could then see that
    before work 2 has run.

 3. A TMF reset completion work could run after ep_disconnect starts
    cleaning up cmds via qedi_clearsq. ep_disconnect's call to qedi_clearsq
    -> qedi_cleanup_all_io would might think it's done cleaning up cmds,
    but the reset completion work could still be running. We then return
    from ep_disconnect while still doing cleanup.

This replaces the bit with a counter to track the number of queued TMF
works, and adds a bool to prevent new works from starting from the
completion path once a ep_disconnect starts.

Link: https://lore.kernel.org/r/20210525181821.7617-28-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02 01:28:23 -04:00

239 lines
5.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* QLogic iSCSI Offload Driver
* Copyright (c) 2016 Cavium Inc.
*/
#ifndef _QEDI_ISCSI_H_
#define _QEDI_ISCSI_H_
#include <linux/socket.h>
#include <linux/completion.h>
#include "qedi.h"
#define ISCSI_MAX_SESS_PER_HBA 4096
#define DEF_KA_TIMEOUT 7200000
#define DEF_KA_INTERVAL 10000
#define DEF_KA_MAX_PROBE_COUNT 10
#define DEF_TOS 0
#define DEF_TTL 0xfe
#define DEF_SND_SEQ_SCALE 0
#define DEF_RCV_BUF 0xffff
#define DEF_SND_BUF 0xffff
#define DEF_SEED 0
#define DEF_MAX_RT_TIME 8000
#define DEF_MAX_DA_COUNT 2
#define DEF_SWS_TIMER 1000
#define DEF_MAX_CWND 2
#define DEF_PATH_MTU 1500
#define DEF_MSS 1460
#define DEF_LL2_MTU 1560
#define JUMBO_MTU 9000
#define MIN_MTU 576 /* rfc 793 */
#define IPV4_HDR_LEN 20
#define IPV6_HDR_LEN 40
#define TCP_HDR_LEN 20
#define TCP_OPTION_LEN 12
#define VLAN_LEN 4
enum {
EP_STATE_IDLE = 0x0,
EP_STATE_ACQRCONN_START = 0x1,
EP_STATE_ACQRCONN_COMPL = 0x2,
EP_STATE_OFLDCONN_START = 0x4,
EP_STATE_OFLDCONN_COMPL = 0x8,
EP_STATE_DISCONN_START = 0x10,
EP_STATE_DISCONN_COMPL = 0x20,
EP_STATE_CLEANUP_START = 0x40,
EP_STATE_CLEANUP_CMPL = 0x80,
EP_STATE_TCP_FIN_RCVD = 0x100,
EP_STATE_TCP_RST_RCVD = 0x200,
EP_STATE_LOGOUT_SENT = 0x400,
EP_STATE_LOGOUT_RESP_RCVD = 0x800,
EP_STATE_CLEANUP_FAILED = 0x1000,
EP_STATE_OFLDCONN_FAILED = 0x2000,
EP_STATE_CONNECT_FAILED = 0x4000,
EP_STATE_DISCONN_TIMEDOUT = 0x8000,
EP_STATE_OFLDCONN_NONE = 0x10000,
};
struct qedi_conn;
struct qedi_endpoint {
struct qedi_ctx *qedi;
u32 dst_addr[4];
u32 src_addr[4];
u16 src_port;
u16 dst_port;
u16 vlan_id;
u16 pmtu;
u8 src_mac[ETH_ALEN];
u8 dst_mac[ETH_ALEN];
u8 ip_type;
int state;
wait_queue_head_t ofld_wait;
wait_queue_head_t tcp_ofld_wait;
u32 iscsi_cid;
/* identifier of the connection from qed */
u32 handle;
u32 fw_cid;
void __iomem *p_doorbell;
/* Send queue management */
struct iscsi_wqe *sq;
dma_addr_t sq_dma;
u16 sq_prod_idx;
u16 fw_sq_prod_idx;
u16 sq_con_idx;
u32 sq_mem_size;
void *sq_pbl;
dma_addr_t sq_pbl_dma;
u32 sq_pbl_size;
struct qedi_conn *conn;
struct work_struct offload_work;
};
#define QEDI_SQ_WQES_MIN 16
struct qedi_io_bdt {
struct scsi_sge *sge_tbl;
dma_addr_t sge_tbl_dma;
u16 sge_valid;
};
/**
* struct generic_pdu_resc - login pdu resource structure
*
* @req_buf: driver buffer used to stage payload associated with
* the login request
* @req_dma_addr: dma address for iscsi login request payload buffer
* @req_buf_size: actual login request payload length
* @req_wr_ptr: pointer into login request buffer when next data is
* to be written
* @resp_hdr: iscsi header where iscsi login response header is to
* be recreated
* @resp_buf: buffer to stage login response payload
* @resp_dma_addr: login response payload buffer dma address
* @resp_buf_size: login response paylod length
* @resp_wr_ptr: pointer into login response buffer when next data is
* to be written
* @req_bd_tbl: iscsi login request payload BD table
* @req_bd_dma: login request BD table dma address
* @resp_bd_tbl: iscsi login response payload BD table
* @resp_bd_dma: login request BD table dma address
*
* following structure defines buffer info for generic pdus such as iSCSI Login,
* Logout and NOP
*/
struct generic_pdu_resc {
char *req_buf;
dma_addr_t req_dma_addr;
u32 req_buf_size;
char *req_wr_ptr;
struct iscsi_hdr resp_hdr;
char *resp_buf;
dma_addr_t resp_dma_addr;
u32 resp_buf_size;
char *resp_wr_ptr;
char *req_bd_tbl;
dma_addr_t req_bd_dma;
char *resp_bd_tbl;
dma_addr_t resp_bd_dma;
};
struct qedi_conn {
struct iscsi_cls_conn *cls_conn;
struct qedi_ctx *qedi;
struct qedi_endpoint *ep;
struct iscsi_endpoint *iscsi_ep;
struct list_head active_cmd_list;
spinlock_t list_lock; /* internal conn lock */
u32 active_cmd_count;
u32 cmd_cleanup_req;
u32 cmd_cleanup_cmpl;
u32 iscsi_conn_id;
int itt;
int abrt_conn;
#define QEDI_CID_RESERVED 0x5AFF
u32 fw_cid;
/*
* Buffer for login negotiation process
*/
struct generic_pdu_resc gen_pdu;
struct list_head tmf_work_list;
wait_queue_head_t wait_queue;
spinlock_t tmf_work_lock; /* tmf work lock */
bool ep_disconnect_starting;
int fw_cleanup_works;
};
struct qedi_cmd {
struct list_head io_cmd;
bool io_cmd_in_list;
struct iscsi_hdr hdr;
struct qedi_conn *conn;
struct scsi_cmnd *scsi_cmd;
struct scatterlist *sg;
struct qedi_io_bdt io_tbl;
struct e4_iscsi_task_context request;
unsigned char *sense_buffer;
dma_addr_t sense_buffer_dma;
u16 task_id;
/* field populated for tmf work queue */
struct iscsi_task *task;
struct work_struct tmf_work;
int state;
#define CLEANUP_WAIT 1
#define CLEANUP_RECV 2
#define CLEANUP_WAIT_FAILED 3
#define CLEANUP_NOT_REQUIRED 4
#define LUN_RESET_RESPONSE_RECEIVED 5
#define RESPONSE_RECEIVED 6
int type;
#define TYPEIO 1
#define TYPERESET 2
struct qedi_work_map *list_tmf_work;
/* slowpath management */
bool use_slowpath;
struct iscsi_tm_rsp *tmf_resp_buf;
struct qedi_work cqe_work;
};
struct qedi_work_map {
struct list_head list;
struct qedi_cmd *qedi_cmd;
struct iscsi_task *ctask;
int rtid;
int state;
#define QEDI_WORK_QUEUED 1
#define QEDI_WORK_SCHEDULED 2
#define QEDI_WORK_EXIT 3
struct work_struct *ptr_tmf_work;
};
struct qedi_boot_target {
char ip_addr[64];
char iscsi_name[255];
u32 ipv6_en;
};
#define qedi_set_itt(task_id, itt) ((u32)(((task_id) & 0xffff) | ((itt) << 16)))
#define qedi_get_itt(cqe) (cqe.iscsi_hdr.cmd.itt >> 16)
#define QEDI_OFLD_WAIT_STATE(q) ((q)->state == EP_STATE_OFLDCONN_FAILED || \
(q)->state == EP_STATE_OFLDCONN_COMPL)
#endif /* _QEDI_ISCSI_H_ */