mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 13:34:38 +08:00
1fbaa95876
This patch adds dt bindings to enable netcp network driver on K2G ICE boards. This consists of enabling bindings for NSS qmss, pktdma, 2u ethss, mdio, pinmux and netcp devices as well as DP83867 phy. EVM hardware spec recommends to add 0.25 nsec delay in the tx direction and 2.25 nsec delay in the rx direction for internal delay in the clock path to be on the safer side. The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode 1. The phy data manual disallows this. Add ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to enable the workaround suggested for this incorrect strap setting. This ensures proper operation of this PHY. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
448 lines
12 KiB
Plaintext
448 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree Source for K2G Industrial Communication Engine EVM
|
|
*
|
|
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "keystone-k2g.dtsi"
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
|
|
/ {
|
|
compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
|
|
model = "Texas Instruments K2G Industrial Communication EVM";
|
|
|
|
memory@800000000 {
|
|
device_type = "memory";
|
|
reg = <0x00000008 0x00000000 0x00000000 0x20000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
dsp_common_memory: dsp-common-memory@81f800000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
|
|
reusable;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
vmain: fixedregulator-vmain {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmain_fixed";
|
|
regulator-min-microvolt = <24000000>;
|
|
regulator-max-microvolt = <24000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
v5_0: fixedregulator-v5_0 {
|
|
/* TPS54531 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5_0_fixed";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vmain>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_3v3: fixedregulator-vdd_3v3 {
|
|
/* TLV62084 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_3v3_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&v5_0>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_1v8: fixedregulator-vdd_1v8 {
|
|
/* TLV62084 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_1v8_fixed";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&v5_0>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdds_ddr: fixedregulator-vdds_ddr {
|
|
/* TLV62080 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdds_ddr_fixed";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
vin-supply = <&v5_0>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_ddr: fixedregulator-vref_ddr {
|
|
/* LP2996A */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vref_ddr_fixed";
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <675000>;
|
|
vin-supply = <&vdd_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vtt_ddr: fixedregulator-vtt_ddr {
|
|
/* LP2996A */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vtt_ddr_fixed";
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <675000>;
|
|
vin-supply = <&vdd_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_0v9: fixedregulator-vdd_0v9 {
|
|
/* TPS62180 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_0v9_fixed";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
vin-supply = <&v5_0>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddb: fixedregulator-vddb {
|
|
/* TPS22945 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vddb_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
gpio-decoder {
|
|
compatible = "gpio-decoder";
|
|
gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
|
|
<&pca9536 2 GPIO_ACTIVE_HIGH>,
|
|
<&pca9536 1 GPIO_ACTIVE_HIGH>,
|
|
<&pca9536 0 GPIO_ACTIVE_HIGH>;
|
|
linux,axis = <0>; /* ABS_X */
|
|
decoder-max-value = <9>;
|
|
};
|
|
|
|
leds1 {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&user_leds>;
|
|
|
|
led0 {
|
|
label = "status0:red:cpu0";
|
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
linux,default-trigger = "cpu0";
|
|
};
|
|
|
|
led1 {
|
|
label = "status0:green:usr";
|
|
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led2 {
|
|
label = "status0:yellow:usr";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led3 {
|
|
label = "status1:red:mmc0";
|
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
led4 {
|
|
label = "status1:green:usr";
|
|
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led5 {
|
|
label = "status1:yellow:usr";
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led6 {
|
|
label = "status2:red:usr";
|
|
gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led7 {
|
|
label = "status2:green:usr";
|
|
gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led8 {
|
|
label = "status2:yellow:usr";
|
|
gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led9 {
|
|
label = "status3:red:usr";
|
|
gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led10 {
|
|
label = "status3:green:usr";
|
|
gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led11 {
|
|
label = "status3:yellow:usr";
|
|
gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led12 {
|
|
label = "status4:green:heartbeat";
|
|
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
};
|
|
|
|
&k2g_pinctrl {
|
|
uart0_pins: pinmux_uart0_pins {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
|
K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
|
>;
|
|
};
|
|
|
|
qspi_pins: pinmux_qspi_pins {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
|
|
K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
|
|
K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
|
|
K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
|
|
K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
|
|
K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
|
|
K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
|
|
K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
|
|
K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
|
|
K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
|
|
K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
|
|
K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
|
|
K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc1_sdcd.gpio0_69 */
|
|
K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_sdwp.mmc1_sdwp */
|
|
K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_pow.mmc1_pow */
|
|
>;
|
|
};
|
|
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
|
K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
|
|
K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
|
|
>;
|
|
};
|
|
|
|
user_leds: pinmux_user_leds {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad11.gpio0_11 */
|
|
K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad12.gpio0_12 */
|
|
K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad13.gpio0_13 */
|
|
K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad14.gpio0_14 */
|
|
K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad15.gpio0_15 */
|
|
K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_clk.gpio0_16 */
|
|
K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_wen.gpio0_19 */
|
|
K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data9.gpio0_44 */
|
|
K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data10.gpio0_43 */
|
|
K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data11.gpio0_42 */
|
|
K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data12.gpio0_41 */
|
|
K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn0.gpio0_101 */
|
|
K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */
|
|
>;
|
|
};
|
|
|
|
emac_pins: pinmux_emac_pins {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */
|
|
K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */
|
|
K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */
|
|
K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */
|
|
K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */
|
|
K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */
|
|
K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */
|
|
K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */
|
|
K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */
|
|
K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */
|
|
K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */
|
|
K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */
|
|
>;
|
|
};
|
|
|
|
mdio_pins: pinmux_mdio_pins {
|
|
pinctrl-single,pins = <
|
|
K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */
|
|
K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dsp0 {
|
|
memory-region = <&dsp_common_memory>;
|
|
status = "okay";
|
|
};
|
|
|
|
&qspi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&qspi_pins>;
|
|
cdns,rclk-en;
|
|
status = "okay";
|
|
|
|
flash0: m25p80@0 {
|
|
compatible = "s25fl256s1", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <96000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cdns,read-delay = <5>;
|
|
cdns,tshsl-ns = <500>;
|
|
cdns,tsd2d-ns = <500>;
|
|
cdns,tchsh-ns = <119>;
|
|
cdns,tslch-ns = <119>;
|
|
|
|
partition@0 {
|
|
label = "QSPI.u-boot";
|
|
reg = <0x00000000 0x00100000>;
|
|
};
|
|
partition@1 {
|
|
label = "QSPI.u-boot-env";
|
|
reg = <0x00100000 0x00040000>;
|
|
};
|
|
partition@2 {
|
|
label = "QSPI.skern";
|
|
reg = <0x00140000 0x0040000>;
|
|
};
|
|
partition@3 {
|
|
label = "QSPI.pmmc-firmware";
|
|
reg = <0x00180000 0x0040000>;
|
|
};
|
|
partition@4 {
|
|
label = "QSPI.kernel";
|
|
reg = <0x001c0000 0x0800000>;
|
|
};
|
|
partition@5 {
|
|
label = "QSPI.u-boot-spl-os";
|
|
reg = <0x009c0000 0x0040000>;
|
|
};
|
|
partition@6 {
|
|
label = "QSPI.file-system";
|
|
reg = <0x00a00000 0x1600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpio0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <&vdd_3v3>;
|
|
cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c256";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
pca9536: gpio@41 {
|
|
compatible = "ti,pca9536";
|
|
reg = <0x41>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
vcc-supply = <&vdd_3v3>;
|
|
};
|
|
};
|
|
|
|
&qmss {
|
|
status = "okay";
|
|
};
|
|
|
|
&knav_dmas {
|
|
status = "okay";
|
|
};
|
|
|
|
&netcp {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emac_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
status = "okay";
|
|
ethphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
|
ti,min-output-impedance;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
};
|
|
};
|
|
|
|
&gbe0 {
|
|
phy-handle = <ðphy0>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
};
|