mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 13:34:38 +08:00
0b9c89e213
The ConnectCore 6UL System-On-Module has the following hardware specification: * Based on a NXP i.MX6UL SoC * Industrial temperature ranges (-40ºC to +85ºC) * Up to 1GB DDR3 memory * Up to 2GB NAND flash * Dual Ethernet * On module 802.11 WiFi and Bluetooth 4.2 (QCA6564) * On module NXP Kinetis KL03 * On module Microchip ATECC508A crypto element Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
202 lines
4.2 KiB
Plaintext
202 lines
4.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Digi International's ConnectCore 6UL System-On-Module device tree source
|
|
*
|
|
* Copyright 2018 Digi International, Inc.
|
|
*
|
|
*/
|
|
|
|
/ {
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
linux,cma {
|
|
compatible = "shared-dma-pool";
|
|
reusable;
|
|
size = <0x4000000>;
|
|
linux,cma-default;
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <&vdda_adc_3v3>;
|
|
};
|
|
|
|
&gpmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pfuze3000: pmic@8 {
|
|
compatible = "fsl,pfuze3000";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
int_3v3: sw1a {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_arm_soc_in: sw1b {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <925000>;
|
|
};
|
|
};
|
|
|
|
ext_3v3: sw2 {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr3: sw3 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1300000>;
|
|
};
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
vdd_snvs_3v3: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vrefddr: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdda_adc_3v3: vldo1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vref-adc-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo2_ext: vldo2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vdda_wlan: vccsd {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_high_in: v33 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_int: vldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo4_ext: vldo4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcoin_chg: vcoin {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_gpmi_nand: gpmigrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
|
|
MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
|
|
MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
|
|
MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
|
|
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
|
|
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
|
|
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
|
|
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
|
|
MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
|
|
MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
|
|
MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
|
|
MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
|
|
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
|
|
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
|
|
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
|
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
|
|
>;
|
|
};
|
|
};
|
|
|
|
®_arm {
|
|
vin-supply = <&vdd_arm_soc_in>;
|
|
regulator-allow-bypass;
|
|
};
|
|
|
|
®_soc {
|
|
vin-supply = <&vdd_arm_soc_in>;
|
|
regulator-allow-bypass;
|
|
};
|