mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 13:34:38 +08:00
37f6130ec3
Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which
requires register range "ccb-mii" <0x18003000 0x1000>. This range
overlaps with MDIO cmd and param registers (<0x18003000 0x8>).
Essentially, the platform driver partly acts like a MDIO bus driver,
hence to use of this register range.
In some Northstar devices like Linksys EA9500, secondary switch is
connected via external MDIO. The only way to access and configure the
external switch is via MDIO bus. When we enable the MDIO bus in it's
current state, the MDIO bus and any child buses fail to register because
of the register range overlap.
On Northstar, the USB 3.0 PHY is connected at address 0x10 on the
internal MDIO bus. This change moves the usb3_phy node and makes it a
child node of internal MDIO bus.
Thanks to Rafał Miłecki's commit af850e14a7 ("phy: bcm-ns-usb3: add
MDIO driver using proper bus layer") the same USB 3.0 platform driver
can now act as USB 3.0 PHY MDIO driver.
Tested on Linksys Panamera (EA9500)
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
102 lines
2.7 KiB
Plaintext
102 lines
2.7 KiB
Plaintext
/*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*
|
|
* Copyright(c) 2017 Broadcom
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Broadcom nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "bcm4708.dtsi"
|
|
#include "bcm5301x-nand-cs0-bch4.dtsi"
|
|
|
|
/ {
|
|
model = "NorthStar HR (BCM953012HR)";
|
|
compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
ethernet1 = &gmac1;
|
|
ethernet2 = &gmac2;
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0x80000000 0x10000000>;
|
|
};
|
|
};
|
|
|
|
&nandcs {
|
|
partition@0 {
|
|
label = "nboot";
|
|
reg = <0x00000000 0x00200000>;
|
|
read-only;
|
|
};
|
|
partition@200000 {
|
|
label = "nenv";
|
|
reg = <0x00200000 0x00400000>;
|
|
};
|
|
partition@600000 {
|
|
label = "nsystem";
|
|
reg = <0x00600000 0x00a00000>;
|
|
};
|
|
partition@1000000 {
|
|
label = "nrootfs";
|
|
reg = <0x01000000 0x07000000>;
|
|
};
|
|
};
|
|
|
|
&spi_nor {
|
|
status = "okay";
|
|
spi-max-frequency = <62500000>;
|
|
m25p,default-addr-width = <3>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "boot";
|
|
reg = <0x00000000 0x000d0000>;
|
|
};
|
|
partition@d000 {
|
|
label = "env";
|
|
reg = <0x000d0000 0x00030000>;
|
|
};
|
|
partition@100000 {
|
|
label = "system";
|
|
reg = <0x00100000 0x00600000>;
|
|
};
|
|
partition@700000 {
|
|
label = "rootfs";
|
|
reg = <0x00700000 0x00900000>;
|
|
};
|
|
};
|
|
|
|
&usb3_phy {
|
|
status = "okay";
|
|
};
|