mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 13:34:38 +08:00
37f6130ec3
Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which
requires register range "ccb-mii" <0x18003000 0x1000>. This range
overlaps with MDIO cmd and param registers (<0x18003000 0x8>).
Essentially, the platform driver partly acts like a MDIO bus driver,
hence to use of this register range.
In some Northstar devices like Linksys EA9500, secondary switch is
connected via external MDIO. The only way to access and configure the
external switch is via MDIO bus. When we enable the MDIO bus in it's
current state, the MDIO bus and any child buses fail to register because
of the register range overlap.
On Northstar, the USB 3.0 PHY is connected at address 0x10 on the
internal MDIO bus. This change moves the usb3_phy node and makes it a
child node of internal MDIO bus.
Thanks to Rafał Miłecki's commit af850e14a7 ("phy: bcm-ns-usb3: add
MDIO driver using proper bus layer") the same USB 3.0 platform driver
can now act as USB 3.0 PHY MDIO driver.
Tested on Linksys Panamera (EA9500)
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
189 lines
3.7 KiB
Plaintext
189 lines
3.7 KiB
Plaintext
/*
|
|
* Broadcom BCM470X / BCM5301X ARM platform code.
|
|
* DTS for Netgear R8000
|
|
*
|
|
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
|
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
|
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
|
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
|
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
|
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
|
* PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "bcm4709.dtsi"
|
|
#include "bcm5301x-nand-cs0-bch8.dtsi"
|
|
|
|
/ {
|
|
compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
|
|
model = "Netgear R8000 (BCM4709)";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
memory {
|
|
reg = <0x00000000 0x08000000
|
|
0x88000000 0x08000000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
power-white {
|
|
label = "bcm53xx:white:power";
|
|
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
power-amber {
|
|
label = "bcm53xx:amber:power";
|
|
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wan-white {
|
|
label = "bcm53xx:white:wan";
|
|
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
wan-amber {
|
|
label = "bcm53xx:amber:wan";
|
|
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
5ghz-1 {
|
|
label = "bcm53xx:white:5ghz-1";
|
|
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
2ghz {
|
|
label = "bcm53xx:white:2ghz";
|
|
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wireless {
|
|
label = "bcm53xx:white:wireless";
|
|
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wps {
|
|
label = "bcm53xx:white:wps";
|
|
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
5ghz-2 {
|
|
label = "bcm53xx:white:5ghz-2";
|
|
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
usb3 {
|
|
label = "bcm53xx:white:usb3";
|
|
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
usb2 {
|
|
label = "bcm53xx:white:usb2";
|
|
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rfkill {
|
|
label = "WiFi";
|
|
linux,code = <KEY_RFKILL>;
|
|
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "WPS";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
restart {
|
|
label = "Reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
brightness {
|
|
label = "Backlight";
|
|
linux,code = <KEY_BRIGHTNESS_ZERO>;
|
|
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
bridge@0,0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
wifi@0,1,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
ieee80211-freq-limit = <5735000 5835000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
bridge@1,0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
bridge@1,1,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
bridge@1,2,2 {
|
|
reg = <0x1000 0 0 0 0>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
wifi@1,4,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
ieee80211-freq-limit = <5170000 5730000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb2 {
|
|
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&usb3 {
|
|
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&usb3_phy {
|
|
status = "okay";
|
|
};
|