mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
1dc575490b
The driver uses GPIO Descriptor Consumer Interface so include proper header to fix compile test errors like: drivers/mmc/host/s3cmci.c: In function ‘s3cmci_check_sdio_irq’: drivers/mmc/host/s3cmci.c:304:7: error: implicit declaration of function ‘gpiod_get_value’; did you mean ‘gpio_get_value’? [-Werror=implicit-function-declaration] drivers/mmc/host/s3cmci.c: In function ‘s3cmci_probe_pdata’: drivers/mmc/host/s3cmci.c:1451:19: error: implicit declaration of function ‘devm_gpiod_get_index’ [-Werror=implicit-function-declaration] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201026153810.89512-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
1783 lines
43 KiB
C
1783 lines
43 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
|
|
*
|
|
* Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
|
|
*
|
|
* Current driver maintained by Ben Dooks and Simtec Electronics
|
|
* Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
#include <linux/platform_data/mmc-s3cmci.h>
|
|
|
|
#include "s3cmci.h"
|
|
|
|
#define DRIVER_NAME "s3c-mci"
|
|
|
|
#define S3C2410_SDICON (0x00)
|
|
#define S3C2410_SDIPRE (0x04)
|
|
#define S3C2410_SDICMDARG (0x08)
|
|
#define S3C2410_SDICMDCON (0x0C)
|
|
#define S3C2410_SDICMDSTAT (0x10)
|
|
#define S3C2410_SDIRSP0 (0x14)
|
|
#define S3C2410_SDIRSP1 (0x18)
|
|
#define S3C2410_SDIRSP2 (0x1C)
|
|
#define S3C2410_SDIRSP3 (0x20)
|
|
#define S3C2410_SDITIMER (0x24)
|
|
#define S3C2410_SDIBSIZE (0x28)
|
|
#define S3C2410_SDIDCON (0x2C)
|
|
#define S3C2410_SDIDCNT (0x30)
|
|
#define S3C2410_SDIDSTA (0x34)
|
|
#define S3C2410_SDIFSTA (0x38)
|
|
|
|
#define S3C2410_SDIDATA (0x3C)
|
|
#define S3C2410_SDIIMSK (0x40)
|
|
|
|
#define S3C2440_SDIDATA (0x40)
|
|
#define S3C2440_SDIIMSK (0x3C)
|
|
|
|
#define S3C2440_SDICON_SDRESET (1 << 8)
|
|
#define S3C2410_SDICON_SDIOIRQ (1 << 3)
|
|
#define S3C2410_SDICON_FIFORESET (1 << 1)
|
|
#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
|
|
|
|
#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
|
|
#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
|
|
#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
|
|
#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
|
|
#define S3C2410_SDICMDCON_INDEX (0x3f)
|
|
|
|
#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
|
|
#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
|
|
#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
|
|
#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
|
|
|
|
#define S3C2440_SDIDCON_DS_WORD (2 << 22)
|
|
#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
|
|
#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
|
|
#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
|
|
#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
|
|
#define S3C2410_SDIDCON_DMAEN (1 << 15)
|
|
#define S3C2410_SDIDCON_STOP (1 << 14)
|
|
#define S3C2440_SDIDCON_DATSTART (1 << 14)
|
|
|
|
#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
|
|
#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
|
|
|
|
#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
|
|
|
|
#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9)
|
|
#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
|
|
#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
|
|
#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
|
|
#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
|
|
#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
|
|
#define S3C2410_SDIDSTA_TXDATAON (1 << 1)
|
|
#define S3C2410_SDIDSTA_RXDATAON (1 << 0)
|
|
|
|
#define S3C2440_SDIFSTA_FIFORESET (1 << 16)
|
|
#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14)
|
|
#define S3C2410_SDIFSTA_TFDET (1 << 13)
|
|
#define S3C2410_SDIFSTA_RFDET (1 << 12)
|
|
#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
|
|
|
|
#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17)
|
|
#define S3C2410_SDIIMSK_CMDSENT (1 << 16)
|
|
#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15)
|
|
#define S3C2410_SDIIMSK_RESPONSEND (1 << 14)
|
|
#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12)
|
|
#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11)
|
|
#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10)
|
|
#define S3C2410_SDIIMSK_DATACRC (1 << 9)
|
|
#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8)
|
|
#define S3C2410_SDIIMSK_DATAFINISH (1 << 7)
|
|
#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4)
|
|
#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2)
|
|
#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0)
|
|
|
|
enum dbg_channels {
|
|
dbg_err = (1 << 0),
|
|
dbg_debug = (1 << 1),
|
|
dbg_info = (1 << 2),
|
|
dbg_irq = (1 << 3),
|
|
dbg_sg = (1 << 4),
|
|
dbg_dma = (1 << 5),
|
|
dbg_pio = (1 << 6),
|
|
dbg_fail = (1 << 7),
|
|
dbg_conf = (1 << 8),
|
|
};
|
|
|
|
static const int dbgmap_err = dbg_fail;
|
|
static const int dbgmap_info = dbg_info | dbg_conf;
|
|
static const int dbgmap_debug = dbg_err | dbg_debug;
|
|
|
|
#define dbg(host, channels, args...) \
|
|
do { \
|
|
if (dbgmap_err & channels) \
|
|
dev_err(&host->pdev->dev, args); \
|
|
else if (dbgmap_info & channels) \
|
|
dev_info(&host->pdev->dev, args); \
|
|
else if (dbgmap_debug & channels) \
|
|
dev_dbg(&host->pdev->dev, args); \
|
|
} while (0)
|
|
|
|
static void finalize_request(struct s3cmci_host *host);
|
|
static void s3cmci_send_request(struct mmc_host *mmc);
|
|
static void s3cmci_reset(struct s3cmci_host *host);
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
|
|
static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
|
|
{
|
|
u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer;
|
|
u32 datcon, datcnt, datsta, fsta;
|
|
|
|
con = readl(host->base + S3C2410_SDICON);
|
|
pre = readl(host->base + S3C2410_SDIPRE);
|
|
cmdarg = readl(host->base + S3C2410_SDICMDARG);
|
|
cmdcon = readl(host->base + S3C2410_SDICMDCON);
|
|
cmdsta = readl(host->base + S3C2410_SDICMDSTAT);
|
|
r0 = readl(host->base + S3C2410_SDIRSP0);
|
|
r1 = readl(host->base + S3C2410_SDIRSP1);
|
|
r2 = readl(host->base + S3C2410_SDIRSP2);
|
|
r3 = readl(host->base + S3C2410_SDIRSP3);
|
|
timer = readl(host->base + S3C2410_SDITIMER);
|
|
datcon = readl(host->base + S3C2410_SDIDCON);
|
|
datcnt = readl(host->base + S3C2410_SDIDCNT);
|
|
datsta = readl(host->base + S3C2410_SDIDSTA);
|
|
fsta = readl(host->base + S3C2410_SDIFSTA);
|
|
|
|
dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n",
|
|
prefix, con, pre, timer);
|
|
|
|
dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
|
|
prefix, cmdcon, cmdarg, cmdsta);
|
|
|
|
dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
|
|
" DSTA:[%08x] DCNT:[%08x]\n",
|
|
prefix, datcon, fsta, datsta, datcnt);
|
|
|
|
dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]"
|
|
" R2:[%08x] R3:[%08x]\n",
|
|
prefix, r0, r1, r2, r3);
|
|
}
|
|
|
|
static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
|
|
int stop)
|
|
{
|
|
snprintf(host->dbgmsg_cmd, 300,
|
|
"#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
|
|
host->ccnt, (stop ? " (STOP)" : ""),
|
|
cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
|
|
|
|
if (cmd->data) {
|
|
snprintf(host->dbgmsg_dat, 300,
|
|
"#%u bsize:%u blocks:%u bytes:%u",
|
|
host->dcnt, cmd->data->blksz,
|
|
cmd->data->blocks,
|
|
cmd->data->blocks * cmd->data->blksz);
|
|
} else {
|
|
host->dbgmsg_dat[0] = '\0';
|
|
}
|
|
}
|
|
|
|
static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
|
|
int fail)
|
|
{
|
|
unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
|
|
|
|
if (!cmd)
|
|
return;
|
|
|
|
if (cmd->error == 0) {
|
|
dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
|
|
host->dbgmsg_cmd, cmd->resp[0]);
|
|
} else {
|
|
dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
|
|
cmd->error, host->dbgmsg_cmd, host->status);
|
|
}
|
|
|
|
if (!cmd->data)
|
|
return;
|
|
|
|
if (cmd->data->error == 0) {
|
|
dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
|
|
} else {
|
|
dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
|
|
cmd->data->error, host->dbgmsg_dat,
|
|
readl(host->base + S3C2410_SDIDCNT));
|
|
}
|
|
}
|
|
#else
|
|
static void dbg_dumpcmd(struct s3cmci_host *host,
|
|
struct mmc_command *cmd, int fail) { }
|
|
|
|
static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
|
|
int stop) { }
|
|
|
|
static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
|
|
|
|
#endif /* CONFIG_MMC_DEBUG */
|
|
|
|
/**
|
|
* s3cmci_host_usedma - return whether the host is using dma or pio
|
|
* @host: The host state
|
|
*
|
|
* Return true if the host is using DMA to transfer data, else false
|
|
* to use PIO mode. Will return static data depending on the driver
|
|
* configuration.
|
|
*/
|
|
static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
|
|
{
|
|
#ifdef CONFIG_MMC_S3C_PIO
|
|
return false;
|
|
#else /* CONFIG_MMC_S3C_DMA */
|
|
return true;
|
|
#endif
|
|
}
|
|
|
|
static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
|
|
{
|
|
u32 newmask;
|
|
|
|
newmask = readl(host->base + host->sdiimsk);
|
|
newmask |= imask;
|
|
|
|
writel(newmask, host->base + host->sdiimsk);
|
|
|
|
return newmask;
|
|
}
|
|
|
|
static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
|
|
{
|
|
u32 newmask;
|
|
|
|
newmask = readl(host->base + host->sdiimsk);
|
|
newmask &= ~imask;
|
|
|
|
writel(newmask, host->base + host->sdiimsk);
|
|
|
|
return newmask;
|
|
}
|
|
|
|
static inline void clear_imask(struct s3cmci_host *host)
|
|
{
|
|
u32 mask = readl(host->base + host->sdiimsk);
|
|
|
|
/* preserve the SDIO IRQ mask state */
|
|
mask &= S3C2410_SDIIMSK_SDIOIRQ;
|
|
writel(mask, host->base + host->sdiimsk);
|
|
}
|
|
|
|
/**
|
|
* s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
|
|
* @host: The host to check.
|
|
*
|
|
* Test to see if the SDIO interrupt is being signalled in case the
|
|
* controller has failed to re-detect a card interrupt. Read GPE8 and
|
|
* see if it is low and if so, signal a SDIO interrupt.
|
|
*
|
|
* This is currently called if a request is finished (we assume that the
|
|
* bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
|
|
* already being indicated.
|
|
*/
|
|
static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
|
|
{
|
|
if (host->sdio_irqen) {
|
|
if (host->pdata->bus[3] &&
|
|
gpiod_get_value(host->pdata->bus[3]) == 0) {
|
|
pr_debug("%s: signalling irq\n", __func__);
|
|
mmc_signal_sdio_irq(host->mmc);
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline int get_data_buffer(struct s3cmci_host *host,
|
|
u32 *bytes, u32 **pointer)
|
|
{
|
|
struct scatterlist *sg;
|
|
|
|
if (host->pio_active == XFER_NONE)
|
|
return -EINVAL;
|
|
|
|
if ((!host->mrq) || (!host->mrq->data))
|
|
return -EINVAL;
|
|
|
|
if (host->pio_sgptr >= host->mrq->data->sg_len) {
|
|
dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
|
|
host->pio_sgptr, host->mrq->data->sg_len);
|
|
return -EBUSY;
|
|
}
|
|
sg = &host->mrq->data->sg[host->pio_sgptr];
|
|
|
|
*bytes = sg->length;
|
|
*pointer = sg_virt(sg);
|
|
|
|
host->pio_sgptr++;
|
|
|
|
dbg(host, dbg_sg, "new buffer (%i/%i)\n",
|
|
host->pio_sgptr, host->mrq->data->sg_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 fifo_count(struct s3cmci_host *host)
|
|
{
|
|
u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
|
|
|
|
fifostat &= S3C2410_SDIFSTA_COUNTMASK;
|
|
return fifostat;
|
|
}
|
|
|
|
static inline u32 fifo_free(struct s3cmci_host *host)
|
|
{
|
|
u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
|
|
|
|
fifostat &= S3C2410_SDIFSTA_COUNTMASK;
|
|
return 63 - fifostat;
|
|
}
|
|
|
|
/**
|
|
* s3cmci_enable_irq - enable IRQ, after having disabled it.
|
|
* @host: The device state.
|
|
* @more: True if more IRQs are expected from transfer.
|
|
*
|
|
* Enable the main IRQ if needed after it has been disabled.
|
|
*
|
|
* The IRQ can be one of the following states:
|
|
* - disabled during IDLE
|
|
* - disabled whilst processing data
|
|
* - enabled during transfer
|
|
* - enabled whilst awaiting SDIO interrupt detection
|
|
*/
|
|
static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
|
|
{
|
|
unsigned long flags;
|
|
bool enable = false;
|
|
|
|
local_irq_save(flags);
|
|
|
|
host->irq_enabled = more;
|
|
host->irq_disabled = false;
|
|
|
|
enable = more | host->sdio_irqen;
|
|
|
|
if (host->irq_state != enable) {
|
|
host->irq_state = enable;
|
|
|
|
if (enable)
|
|
enable_irq(host->irq);
|
|
else
|
|
disable_irq(host->irq);
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* pr_debug("%s: transfer %d\n", __func__, transfer); */
|
|
|
|
host->irq_disabled = transfer;
|
|
|
|
if (transfer && host->irq_state) {
|
|
host->irq_state = false;
|
|
disable_irq(host->irq);
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void do_pio_read(struct s3cmci_host *host)
|
|
{
|
|
int res;
|
|
u32 fifo;
|
|
u32 *ptr;
|
|
u32 fifo_words;
|
|
void __iomem *from_ptr;
|
|
|
|
/* write real prescaler to host, it might be set slow to fix */
|
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
|
|
|
from_ptr = host->base + host->sdidata;
|
|
|
|
while ((fifo = fifo_count(host))) {
|
|
if (!host->pio_bytes) {
|
|
res = get_data_buffer(host, &host->pio_bytes,
|
|
&host->pio_ptr);
|
|
if (res) {
|
|
host->pio_active = XFER_NONE;
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
dbg(host, dbg_pio, "pio_read(): "
|
|
"complete (no more data).\n");
|
|
return;
|
|
}
|
|
|
|
dbg(host, dbg_pio,
|
|
"pio_read(): new target: [%i]@[%p]\n",
|
|
host->pio_bytes, host->pio_ptr);
|
|
}
|
|
|
|
dbg(host, dbg_pio,
|
|
"pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
|
|
fifo, host->pio_bytes,
|
|
readl(host->base + S3C2410_SDIDCNT));
|
|
|
|
/* If we have reached the end of the block, we can
|
|
* read a word and get 1 to 3 bytes. If we in the
|
|
* middle of the block, we have to read full words,
|
|
* otherwise we will write garbage, so round down to
|
|
* an even multiple of 4. */
|
|
if (fifo >= host->pio_bytes)
|
|
fifo = host->pio_bytes;
|
|
else
|
|
fifo -= fifo & 3;
|
|
|
|
host->pio_bytes -= fifo;
|
|
host->pio_count += fifo;
|
|
|
|
fifo_words = fifo >> 2;
|
|
ptr = host->pio_ptr;
|
|
while (fifo_words--)
|
|
*ptr++ = readl(from_ptr);
|
|
host->pio_ptr = ptr;
|
|
|
|
if (fifo & 3) {
|
|
u32 n = fifo & 3;
|
|
u32 data = readl(from_ptr);
|
|
u8 *p = (u8 *)host->pio_ptr;
|
|
|
|
while (n--) {
|
|
*p++ = data;
|
|
data >>= 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!host->pio_bytes) {
|
|
res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
|
|
if (res) {
|
|
dbg(host, dbg_pio,
|
|
"pio_read(): complete (no more buffers).\n");
|
|
host->pio_active = XFER_NONE;
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
return;
|
|
}
|
|
}
|
|
|
|
enable_imask(host,
|
|
S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
|
|
}
|
|
|
|
static void do_pio_write(struct s3cmci_host *host)
|
|
{
|
|
void __iomem *to_ptr;
|
|
int res;
|
|
u32 fifo;
|
|
u32 *ptr;
|
|
|
|
to_ptr = host->base + host->sdidata;
|
|
|
|
while ((fifo = fifo_free(host)) > 3) {
|
|
if (!host->pio_bytes) {
|
|
res = get_data_buffer(host, &host->pio_bytes,
|
|
&host->pio_ptr);
|
|
if (res) {
|
|
dbg(host, dbg_pio,
|
|
"pio_write(): complete (no more data).\n");
|
|
host->pio_active = XFER_NONE;
|
|
|
|
return;
|
|
}
|
|
|
|
dbg(host, dbg_pio,
|
|
"pio_write(): new source: [%i]@[%p]\n",
|
|
host->pio_bytes, host->pio_ptr);
|
|
|
|
}
|
|
|
|
/* If we have reached the end of the block, we have to
|
|
* write exactly the remaining number of bytes. If we
|
|
* in the middle of the block, we have to write full
|
|
* words, so round down to an even multiple of 4. */
|
|
if (fifo >= host->pio_bytes)
|
|
fifo = host->pio_bytes;
|
|
else
|
|
fifo -= fifo & 3;
|
|
|
|
host->pio_bytes -= fifo;
|
|
host->pio_count += fifo;
|
|
|
|
fifo = (fifo + 3) >> 2;
|
|
ptr = host->pio_ptr;
|
|
while (fifo--)
|
|
writel(*ptr++, to_ptr);
|
|
host->pio_ptr = ptr;
|
|
}
|
|
|
|
enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
|
}
|
|
|
|
static void pio_tasklet(unsigned long data)
|
|
{
|
|
struct s3cmci_host *host = (struct s3cmci_host *) data;
|
|
|
|
s3cmci_disable_irq(host, true);
|
|
|
|
if (host->pio_active == XFER_WRITE)
|
|
do_pio_write(host);
|
|
|
|
if (host->pio_active == XFER_READ)
|
|
do_pio_read(host);
|
|
|
|
if (host->complete_what == COMPLETION_FINALIZE) {
|
|
clear_imask(host);
|
|
if (host->pio_active != XFER_NONE) {
|
|
dbg(host, dbg_err, "unfinished %s "
|
|
"- pio_count:[%u] pio_bytes:[%u]\n",
|
|
(host->pio_active == XFER_READ) ? "read" : "write",
|
|
host->pio_count, host->pio_bytes);
|
|
|
|
if (host->mrq->data)
|
|
host->mrq->data->error = -EINVAL;
|
|
}
|
|
|
|
s3cmci_enable_irq(host, false);
|
|
finalize_request(host);
|
|
} else
|
|
s3cmci_enable_irq(host, true);
|
|
}
|
|
|
|
/*
|
|
* ISR for SDI Interface IRQ
|
|
* Communication between driver and ISR works as follows:
|
|
* host->mrq points to current request
|
|
* host->complete_what Indicates when the request is considered done
|
|
* COMPLETION_CMDSENT when the command was sent
|
|
* COMPLETION_RSPFIN when a response was received
|
|
* COMPLETION_XFERFINISH when the data transfer is finished
|
|
* COMPLETION_XFERFINISH_RSPFIN both of the above.
|
|
* host->complete_request is the completion-object the driver waits for
|
|
*
|
|
* 1) Driver sets up host->mrq and host->complete_what
|
|
* 2) Driver prepares the transfer
|
|
* 3) Driver enables interrupts
|
|
* 4) Driver starts transfer
|
|
* 5) Driver waits for host->complete_rquest
|
|
* 6) ISR checks for request status (errors and success)
|
|
* 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
|
|
* 7) ISR completes host->complete_request
|
|
* 8) ISR disables interrupts
|
|
* 9) Driver wakes up and takes care of the request
|
|
*
|
|
* Note: "->error"-fields are expected to be set to 0 before the request
|
|
* was issued by mmc.c - therefore they are only set, when an error
|
|
* contition comes up
|
|
*/
|
|
|
|
static irqreturn_t s3cmci_irq(int irq, void *dev_id)
|
|
{
|
|
struct s3cmci_host *host = dev_id;
|
|
struct mmc_command *cmd;
|
|
u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
|
|
u32 mci_cclear = 0, mci_dclear;
|
|
unsigned long iflags;
|
|
|
|
mci_dsta = readl(host->base + S3C2410_SDIDSTA);
|
|
mci_imsk = readl(host->base + host->sdiimsk);
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
|
|
if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
|
|
mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
|
|
writel(mci_dclear, host->base + S3C2410_SDIDSTA);
|
|
|
|
mmc_signal_sdio_irq(host->mmc);
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&host->complete_lock, iflags);
|
|
|
|
mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
|
|
mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
|
|
mci_fsta = readl(host->base + S3C2410_SDIFSTA);
|
|
mci_dclear = 0;
|
|
|
|
if ((host->complete_what == COMPLETION_NONE) ||
|
|
(host->complete_what == COMPLETION_FINALIZE)) {
|
|
host->status = "nothing to complete";
|
|
clear_imask(host);
|
|
goto irq_out;
|
|
}
|
|
|
|
if (!host->mrq) {
|
|
host->status = "no active mrq";
|
|
clear_imask(host);
|
|
goto irq_out;
|
|
}
|
|
|
|
cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
|
|
|
|
if (!cmd) {
|
|
host->status = "no active cmd";
|
|
clear_imask(host);
|
|
goto irq_out;
|
|
}
|
|
|
|
if (!s3cmci_host_usedma(host)) {
|
|
if ((host->pio_active == XFER_WRITE) &&
|
|
(mci_fsta & S3C2410_SDIFSTA_TFDET)) {
|
|
|
|
disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
host->status = "pio tx";
|
|
}
|
|
|
|
if ((host->pio_active == XFER_READ) &&
|
|
(mci_fsta & S3C2410_SDIFSTA_RFDET)) {
|
|
|
|
disable_imask(host,
|
|
S3C2410_SDIIMSK_RXFIFOHALF |
|
|
S3C2410_SDIIMSK_RXFIFOLAST);
|
|
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
host->status = "pio rx";
|
|
}
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
|
|
dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
|
|
cmd->error = -ETIMEDOUT;
|
|
host->status = "error: command timeout";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
|
|
if (host->complete_what == COMPLETION_CMDSENT) {
|
|
host->status = "ok: command sent";
|
|
goto close_transfer;
|
|
}
|
|
|
|
mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
|
|
if (cmd->flags & MMC_RSP_CRC) {
|
|
if (host->mrq->cmd->flags & MMC_RSP_136) {
|
|
dbg(host, dbg_irq,
|
|
"fixup: ignore CRC fail with long rsp\n");
|
|
} else {
|
|
/* note, we used to fail the transfer
|
|
* here, but it seems that this is just
|
|
* the hardware getting it wrong.
|
|
*
|
|
* cmd->error = -EILSEQ;
|
|
* host->status = "error: bad command crc";
|
|
* goto fail_transfer;
|
|
*/
|
|
}
|
|
}
|
|
|
|
mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
|
|
if (host->complete_what == COMPLETION_RSPFIN) {
|
|
host->status = "ok: command response received";
|
|
goto close_transfer;
|
|
}
|
|
|
|
if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
|
|
host->complete_what = COMPLETION_XFERFINISH;
|
|
|
|
mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
|
|
}
|
|
|
|
/* errors handled after this point are only relevant
|
|
when a data transfer is in progress */
|
|
|
|
if (!cmd->data)
|
|
goto clear_status_bits;
|
|
|
|
/* Check for FIFO failure */
|
|
if (host->is2440) {
|
|
if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
|
|
dbg(host, dbg_err, "FIFO failure\n");
|
|
host->mrq->data->error = -EILSEQ;
|
|
host->status = "error: 2440 fifo failure";
|
|
goto fail_transfer;
|
|
}
|
|
} else {
|
|
if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
|
|
dbg(host, dbg_err, "FIFO failure\n");
|
|
cmd->data->error = -EILSEQ;
|
|
host->status = "error: fifo failure";
|
|
goto fail_transfer;
|
|
}
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
|
|
dbg(host, dbg_err, "bad data crc (outgoing)\n");
|
|
cmd->data->error = -EILSEQ;
|
|
host->status = "error: bad data crc (outgoing)";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
|
|
dbg(host, dbg_err, "bad data crc (incoming)\n");
|
|
cmd->data->error = -EILSEQ;
|
|
host->status = "error: bad data crc (incoming)";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
|
|
dbg(host, dbg_err, "data timeout\n");
|
|
cmd->data->error = -ETIMEDOUT;
|
|
host->status = "error: data timeout";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
|
|
if (host->complete_what == COMPLETION_XFERFINISH) {
|
|
host->status = "ok: data transfer completed";
|
|
goto close_transfer;
|
|
}
|
|
|
|
if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
|
|
host->complete_what = COMPLETION_RSPFIN;
|
|
|
|
mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
|
|
}
|
|
|
|
clear_status_bits:
|
|
writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
|
|
writel(mci_dclear, host->base + S3C2410_SDIDSTA);
|
|
|
|
goto irq_out;
|
|
|
|
fail_transfer:
|
|
host->pio_active = XFER_NONE;
|
|
|
|
close_transfer:
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
clear_imask(host);
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
|
|
goto irq_out;
|
|
|
|
irq_out:
|
|
dbg(host, dbg_irq,
|
|
"csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
|
|
mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
|
|
|
|
spin_unlock_irqrestore(&host->complete_lock, iflags);
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
static void s3cmci_dma_done_callback(void *arg)
|
|
{
|
|
struct s3cmci_host *host = arg;
|
|
unsigned long iflags;
|
|
|
|
BUG_ON(!host->mrq);
|
|
BUG_ON(!host->mrq->data);
|
|
|
|
spin_lock_irqsave(&host->complete_lock, iflags);
|
|
|
|
dbg(host, dbg_dma, "DMA FINISHED\n");
|
|
|
|
host->dma_complete = 1;
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
spin_unlock_irqrestore(&host->complete_lock, iflags);
|
|
|
|
}
|
|
|
|
static void finalize_request(struct s3cmci_host *host)
|
|
{
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_command *cmd;
|
|
int debug_as_failure = 0;
|
|
|
|
if (host->complete_what != COMPLETION_FINALIZE)
|
|
return;
|
|
|
|
if (!mrq)
|
|
return;
|
|
cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
|
|
|
|
if (cmd->data && (cmd->error == 0) &&
|
|
(cmd->data->error == 0)) {
|
|
if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
|
|
dbg(host, dbg_dma, "DMA Missing (%d)!\n",
|
|
host->dma_complete);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Read response from controller. */
|
|
cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
|
|
cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
|
|
cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
|
|
cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
|
|
|
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
|
|
|
if (cmd->error)
|
|
debug_as_failure = 1;
|
|
|
|
if (cmd->data && cmd->data->error)
|
|
debug_as_failure = 1;
|
|
|
|
dbg_dumpcmd(host, cmd, debug_as_failure);
|
|
|
|
/* Cleanup controller */
|
|
writel(0, host->base + S3C2410_SDICMDARG);
|
|
writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
|
|
writel(0, host->base + S3C2410_SDICMDCON);
|
|
clear_imask(host);
|
|
|
|
if (cmd->data && cmd->error)
|
|
cmd->data->error = cmd->error;
|
|
|
|
if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
|
|
host->cmd_is_stop = 1;
|
|
s3cmci_send_request(host->mmc);
|
|
return;
|
|
}
|
|
|
|
/* If we have no data transfer we are finished here */
|
|
if (!mrq->data)
|
|
goto request_done;
|
|
|
|
/* Calculate the amout of bytes transfer if there was no error */
|
|
if (mrq->data->error == 0) {
|
|
mrq->data->bytes_xfered =
|
|
(mrq->data->blocks * mrq->data->blksz);
|
|
} else {
|
|
mrq->data->bytes_xfered = 0;
|
|
}
|
|
|
|
/* If we had an error while transferring data we flush the
|
|
* DMA channel and the fifo to clear out any garbage. */
|
|
if (mrq->data->error != 0) {
|
|
if (s3cmci_host_usedma(host))
|
|
dmaengine_terminate_all(host->dma);
|
|
|
|
if (host->is2440) {
|
|
/* Clear failure register and reset fifo. */
|
|
writel(S3C2440_SDIFSTA_FIFORESET |
|
|
S3C2440_SDIFSTA_FIFOFAIL,
|
|
host->base + S3C2410_SDIFSTA);
|
|
} else {
|
|
u32 mci_con;
|
|
|
|
/* reset fifo */
|
|
mci_con = readl(host->base + S3C2410_SDICON);
|
|
mci_con |= S3C2410_SDICON_FIFORESET;
|
|
|
|
writel(mci_con, host->base + S3C2410_SDICON);
|
|
}
|
|
}
|
|
|
|
request_done:
|
|
host->complete_what = COMPLETION_NONE;
|
|
host->mrq = NULL;
|
|
|
|
s3cmci_check_sdio_irq(host);
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
static void s3cmci_send_command(struct s3cmci_host *host,
|
|
struct mmc_command *cmd)
|
|
{
|
|
u32 ccon, imsk;
|
|
|
|
imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
|
|
S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
|
|
S3C2410_SDIIMSK_RESPONSECRC;
|
|
|
|
enable_imask(host, imsk);
|
|
|
|
if (cmd->data)
|
|
host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
|
|
else if (cmd->flags & MMC_RSP_PRESENT)
|
|
host->complete_what = COMPLETION_RSPFIN;
|
|
else
|
|
host->complete_what = COMPLETION_CMDSENT;
|
|
|
|
writel(cmd->arg, host->base + S3C2410_SDICMDARG);
|
|
|
|
ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX;
|
|
ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT)
|
|
ccon |= S3C2410_SDICMDCON_WAITRSP;
|
|
|
|
if (cmd->flags & MMC_RSP_136)
|
|
ccon |= S3C2410_SDICMDCON_LONGRSP;
|
|
|
|
writel(ccon, host->base + S3C2410_SDICMDCON);
|
|
}
|
|
|
|
static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
|
|
{
|
|
u32 dcon, imsk, stoptries = 3;
|
|
|
|
if ((data->blksz & 3) != 0) {
|
|
/* We cannot deal with unaligned blocks with more than
|
|
* one block being transferred. */
|
|
|
|
if (data->blocks > 1) {
|
|
pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
|
|
__func__, data->blksz);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
while (readl(host->base + S3C2410_SDIDSTA) &
|
|
(S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
|
|
|
|
dbg(host, dbg_err,
|
|
"mci_setup_data() transfer stillin progress.\n");
|
|
|
|
writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
|
|
s3cmci_reset(host);
|
|
|
|
if ((stoptries--) == 0) {
|
|
dbg_dumpregs(host, "DRF");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
|
|
|
|
if (s3cmci_host_usedma(host))
|
|
dcon |= S3C2410_SDIDCON_DMAEN;
|
|
|
|
if (host->bus_width == MMC_BUS_WIDTH_4)
|
|
dcon |= S3C2410_SDIDCON_WIDEBUS;
|
|
|
|
dcon |= S3C2410_SDIDCON_BLOCKMODE;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
dcon |= S3C2410_SDIDCON_TXAFTERRESP;
|
|
dcon |= S3C2410_SDIDCON_XFER_TXSTART;
|
|
}
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
dcon |= S3C2410_SDIDCON_RXAFTERCMD;
|
|
dcon |= S3C2410_SDIDCON_XFER_RXSTART;
|
|
}
|
|
|
|
if (host->is2440) {
|
|
dcon |= S3C2440_SDIDCON_DS_WORD;
|
|
dcon |= S3C2440_SDIDCON_DATSTART;
|
|
}
|
|
|
|
writel(dcon, host->base + S3C2410_SDIDCON);
|
|
|
|
/* write BSIZE register */
|
|
|
|
writel(data->blksz, host->base + S3C2410_SDIBSIZE);
|
|
|
|
/* add to IMASK register */
|
|
imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
|
|
S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
|
|
|
|
enable_imask(host, imsk);
|
|
|
|
/* write TIMER register */
|
|
|
|
if (host->is2440) {
|
|
writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
|
|
} else {
|
|
writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
|
|
|
|
/* FIX: set slow clock to prevent timeouts on read */
|
|
if (data->flags & MMC_DATA_READ)
|
|
writel(0xFF, host->base + S3C2410_SDIPRE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
|
|
|
|
static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
|
|
{
|
|
int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
|
|
|
|
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
|
|
|
|
host->pio_sgptr = 0;
|
|
host->pio_bytes = 0;
|
|
host->pio_count = 0;
|
|
host->pio_active = rw ? XFER_WRITE : XFER_READ;
|
|
|
|
if (rw) {
|
|
do_pio_write(host);
|
|
enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
|
} else {
|
|
enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
|
|
| S3C2410_SDIIMSK_RXFIFOLAST);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
|
|
{
|
|
int rw = data->flags & MMC_DATA_WRITE;
|
|
struct dma_async_tx_descriptor *desc;
|
|
struct dma_slave_config conf = {
|
|
.src_addr = host->mem->start + host->sdidata,
|
|
.dst_addr = host->mem->start + host->sdidata,
|
|
.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
};
|
|
|
|
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
|
|
|
|
/* Restore prescaler value */
|
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
|
|
|
if (!rw)
|
|
conf.direction = DMA_DEV_TO_MEM;
|
|
else
|
|
conf.direction = DMA_MEM_TO_DEV;
|
|
|
|
dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
|
mmc_get_dma_dir(data));
|
|
|
|
dmaengine_slave_config(host->dma, &conf);
|
|
desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len,
|
|
conf.direction,
|
|
DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
|
|
if (!desc)
|
|
goto unmap_exit;
|
|
desc->callback = s3cmci_dma_done_callback;
|
|
desc->callback_param = host;
|
|
dmaengine_submit(desc);
|
|
dma_async_issue_pending(host->dma);
|
|
|
|
return 0;
|
|
|
|
unmap_exit:
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
|
mmc_get_dma_dir(data));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void s3cmci_send_request(struct mmc_host *mmc)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
|
|
|
|
host->ccnt++;
|
|
prepare_dbgmsg(host, cmd, host->cmd_is_stop);
|
|
|
|
/* Clear command, data and fifo status registers
|
|
Fifo clear only necessary on 2440, but doesn't hurt on 2410
|
|
*/
|
|
writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
|
|
writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
|
|
writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
|
|
|
|
if (cmd->data) {
|
|
int res = s3cmci_setup_data(host, cmd->data);
|
|
|
|
host->dcnt++;
|
|
|
|
if (res) {
|
|
dbg(host, dbg_err, "setup data error %d\n", res);
|
|
cmd->error = res;
|
|
cmd->data->error = res;
|
|
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
|
|
if (s3cmci_host_usedma(host))
|
|
res = s3cmci_prepare_dma(host, cmd->data);
|
|
else
|
|
res = s3cmci_prepare_pio(host, cmd->data);
|
|
|
|
if (res) {
|
|
dbg(host, dbg_err, "data prepare error %d\n", res);
|
|
cmd->error = res;
|
|
cmd->data->error = res;
|
|
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Send command */
|
|
s3cmci_send_command(host, cmd);
|
|
|
|
/* Enable Interrupt */
|
|
s3cmci_enable_irq(host, true);
|
|
}
|
|
|
|
static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
|
|
host->status = "mmc request";
|
|
host->cmd_is_stop = 0;
|
|
host->mrq = mrq;
|
|
|
|
if (mmc_gpio_get_cd(mmc) == 0) {
|
|
dbg(host, dbg_err, "%s: no medium present\n", __func__);
|
|
host->mrq->cmd->error = -ENOMEDIUM;
|
|
mmc_request_done(mmc, mrq);
|
|
} else
|
|
s3cmci_send_request(mmc);
|
|
}
|
|
|
|
static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios)
|
|
{
|
|
u32 mci_psc;
|
|
|
|
/* Set clock */
|
|
for (mci_psc = 0; mci_psc < 255; mci_psc++) {
|
|
host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
|
|
|
|
if (host->real_rate <= ios->clock)
|
|
break;
|
|
}
|
|
|
|
if (mci_psc > 255)
|
|
mci_psc = 255;
|
|
|
|
host->prescaler = mci_psc;
|
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
|
|
|
/* If requested clock is 0, real_rate will be 0, too */
|
|
if (ios->clock == 0)
|
|
host->real_rate = 0;
|
|
}
|
|
|
|
static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
u32 mci_con;
|
|
|
|
/* Set the power state */
|
|
|
|
mci_con = readl(host->base + S3C2410_SDICON);
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_ON:
|
|
case MMC_POWER_UP:
|
|
if (!host->is2440)
|
|
mci_con |= S3C2410_SDICON_FIFORESET;
|
|
break;
|
|
|
|
case MMC_POWER_OFF:
|
|
default:
|
|
if (host->is2440)
|
|
mci_con |= S3C2440_SDICON_SDRESET;
|
|
break;
|
|
}
|
|
|
|
if (host->pdata->set_power)
|
|
host->pdata->set_power(ios->power_mode, ios->vdd);
|
|
|
|
s3cmci_set_clk(host, ios);
|
|
|
|
/* Set CLOCK_ENABLE */
|
|
if (ios->clock)
|
|
mci_con |= S3C2410_SDICON_CLOCKTYPE;
|
|
else
|
|
mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
|
|
|
|
writel(mci_con, host->base + S3C2410_SDICON);
|
|
|
|
if ((ios->power_mode == MMC_POWER_ON) ||
|
|
(ios->power_mode == MMC_POWER_UP)) {
|
|
dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
|
|
host->real_rate/1000, ios->clock/1000);
|
|
} else {
|
|
dbg(host, dbg_conf, "powered down.\n");
|
|
}
|
|
|
|
host->bus_width = ios->bus_width;
|
|
}
|
|
|
|
static void s3cmci_reset(struct s3cmci_host *host)
|
|
{
|
|
u32 con = readl(host->base + S3C2410_SDICON);
|
|
|
|
con |= S3C2440_SDICON_SDRESET;
|
|
writel(con, host->base + S3C2410_SDICON);
|
|
}
|
|
|
|
static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
unsigned long flags;
|
|
u32 con;
|
|
|
|
local_irq_save(flags);
|
|
|
|
con = readl(host->base + S3C2410_SDICON);
|
|
host->sdio_irqen = enable;
|
|
|
|
if (enable == host->sdio_irqen)
|
|
goto same_state;
|
|
|
|
if (enable) {
|
|
con |= S3C2410_SDICON_SDIOIRQ;
|
|
enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
|
|
|
|
if (!host->irq_state && !host->irq_disabled) {
|
|
host->irq_state = true;
|
|
enable_irq(host->irq);
|
|
}
|
|
} else {
|
|
disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
|
|
con &= ~S3C2410_SDICON_SDIOIRQ;
|
|
|
|
if (!host->irq_enabled && host->irq_state) {
|
|
disable_irq_nosync(host->irq);
|
|
host->irq_state = false;
|
|
}
|
|
}
|
|
|
|
writel(con, host->base + S3C2410_SDICON);
|
|
|
|
same_state:
|
|
local_irq_restore(flags);
|
|
|
|
s3cmci_check_sdio_irq(host);
|
|
}
|
|
|
|
static const struct mmc_host_ops s3cmci_ops = {
|
|
.request = s3cmci_request,
|
|
.set_ios = s3cmci_set_ios,
|
|
.get_ro = mmc_gpio_get_ro,
|
|
.get_cd = mmc_gpio_get_cd,
|
|
.enable_sdio_irq = s3cmci_enable_sdio_irq,
|
|
};
|
|
|
|
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
|
|
|
|
static int s3cmci_cpufreq_transition(struct notifier_block *nb,
|
|
unsigned long val, void *data)
|
|
{
|
|
struct s3cmci_host *host;
|
|
struct mmc_host *mmc;
|
|
unsigned long newclk;
|
|
unsigned long flags;
|
|
|
|
host = container_of(nb, struct s3cmci_host, freq_transition);
|
|
newclk = clk_get_rate(host->clk);
|
|
mmc = host->mmc;
|
|
|
|
if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) ||
|
|
(val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) {
|
|
spin_lock_irqsave(&mmc->lock, flags);
|
|
|
|
host->clk_rate = newclk;
|
|
|
|
if (mmc->ios.power_mode != MMC_POWER_OFF &&
|
|
mmc->ios.clock != 0)
|
|
s3cmci_set_clk(host, &mmc->ios);
|
|
|
|
spin_unlock_irqrestore(&mmc->lock, flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
|
|
{
|
|
host->freq_transition.notifier_call = s3cmci_cpufreq_transition;
|
|
|
|
return cpufreq_register_notifier(&host->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
|
|
static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
|
|
{
|
|
cpufreq_unregister_notifier(&host->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
|
|
#else
|
|
static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
static int s3cmci_state_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct s3cmci_host *host = seq->private;
|
|
|
|
seq_printf(seq, "Register base = 0x%p\n", host->base);
|
|
seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
|
|
seq_printf(seq, "Prescale = %d\n", host->prescaler);
|
|
seq_printf(seq, "is2440 = %d\n", host->is2440);
|
|
seq_printf(seq, "IRQ = %d\n", host->irq);
|
|
seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
|
|
seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
|
|
seq_printf(seq, "IRQ state = %d\n", host->irq_state);
|
|
seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
|
|
seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
|
|
seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
|
|
seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SHOW_ATTRIBUTE(s3cmci_state);
|
|
|
|
#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
|
|
|
|
struct s3cmci_reg {
|
|
unsigned short addr;
|
|
unsigned char *name;
|
|
};
|
|
|
|
static const struct s3cmci_reg debug_regs[] = {
|
|
DBG_REG(CON),
|
|
DBG_REG(PRE),
|
|
DBG_REG(CMDARG),
|
|
DBG_REG(CMDCON),
|
|
DBG_REG(CMDSTAT),
|
|
DBG_REG(RSP0),
|
|
DBG_REG(RSP1),
|
|
DBG_REG(RSP2),
|
|
DBG_REG(RSP3),
|
|
DBG_REG(TIMER),
|
|
DBG_REG(BSIZE),
|
|
DBG_REG(DCON),
|
|
DBG_REG(DCNT),
|
|
DBG_REG(DSTA),
|
|
DBG_REG(FSTA),
|
|
{}
|
|
};
|
|
|
|
static int s3cmci_regs_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct s3cmci_host *host = seq->private;
|
|
const struct s3cmci_reg *rptr = debug_regs;
|
|
|
|
for (; rptr->name; rptr++)
|
|
seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
|
|
readl(host->base + rptr->addr));
|
|
|
|
seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SHOW_ATTRIBUTE(s3cmci_regs);
|
|
|
|
static void s3cmci_debugfs_attach(struct s3cmci_host *host)
|
|
{
|
|
struct device *dev = &host->pdev->dev;
|
|
struct dentry *root;
|
|
|
|
root = debugfs_create_dir(dev_name(dev), NULL);
|
|
host->debug_root = root;
|
|
|
|
debugfs_create_file("state", 0444, root, host, &s3cmci_state_fops);
|
|
debugfs_create_file("regs", 0444, root, host, &s3cmci_regs_fops);
|
|
}
|
|
|
|
static void s3cmci_debugfs_remove(struct s3cmci_host *host)
|
|
{
|
|
debugfs_remove_recursive(host->debug_root);
|
|
}
|
|
|
|
#else
|
|
static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
|
|
static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
|
|
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
static int s3cmci_probe_pdata(struct s3cmci_host *host)
|
|
{
|
|
struct platform_device *pdev = host->pdev;
|
|
struct mmc_host *mmc = host->mmc;
|
|
struct s3c24xx_mci_pdata *pdata;
|
|
int i, ret;
|
|
|
|
host->is2440 = platform_get_device_id(pdev)->driver_data;
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "need platform data");
|
|
return -ENXIO;
|
|
}
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
pdata->bus[i] = devm_gpiod_get_index(&pdev->dev, "bus", i,
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(pdata->bus[i])) {
|
|
dev_err(&pdev->dev, "failed to get gpio %d\n", i);
|
|
return PTR_ERR(pdata->bus[i]);
|
|
}
|
|
}
|
|
|
|
if (pdata->no_wprotect)
|
|
mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
|
|
|
|
if (pdata->no_detect)
|
|
mmc->caps |= MMC_CAP_NEEDS_POLL;
|
|
|
|
if (pdata->wprotect_invert)
|
|
mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
|
|
|
|
/* If we get -ENOENT we have no card detect GPIO line */
|
|
ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
|
|
if (ret != -ENOENT) {
|
|
dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0);
|
|
if (ret != -ENOENT) {
|
|
dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3cmci_probe_dt(struct s3cmci_host *host)
|
|
{
|
|
struct platform_device *pdev = host->pdev;
|
|
struct s3c24xx_mci_pdata *pdata;
|
|
struct mmc_host *mmc = host->mmc;
|
|
int ret;
|
|
|
|
host->is2440 = (long) of_device_get_match_data(&pdev->dev);
|
|
|
|
ret = mmc_of_parse(mmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
pdev->dev.platform_data = pdata;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3cmci_probe(struct platform_device *pdev)
|
|
{
|
|
struct s3cmci_host *host;
|
|
struct mmc_host *mmc;
|
|
int ret;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
|
|
if (!mmc) {
|
|
ret = -ENOMEM;
|
|
goto probe_out;
|
|
}
|
|
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
host->pdev = pdev;
|
|
|
|
if (pdev->dev.of_node)
|
|
ret = s3cmci_probe_dt(host);
|
|
else
|
|
ret = s3cmci_probe_pdata(host);
|
|
|
|
if (ret)
|
|
goto probe_free_host;
|
|
|
|
host->pdata = pdev->dev.platform_data;
|
|
|
|
spin_lock_init(&host->complete_lock);
|
|
tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
|
|
|
|
if (host->is2440) {
|
|
host->sdiimsk = S3C2440_SDIIMSK;
|
|
host->sdidata = S3C2440_SDIDATA;
|
|
host->clk_div = 1;
|
|
} else {
|
|
host->sdiimsk = S3C2410_SDIIMSK;
|
|
host->sdidata = S3C2410_SDIDATA;
|
|
host->clk_div = 2;
|
|
}
|
|
|
|
host->complete_what = COMPLETION_NONE;
|
|
host->pio_active = XFER_NONE;
|
|
|
|
host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!host->mem) {
|
|
dev_err(&pdev->dev,
|
|
"failed to get io memory region resource.\n");
|
|
|
|
ret = -ENOENT;
|
|
goto probe_free_host;
|
|
}
|
|
|
|
host->mem = request_mem_region(host->mem->start,
|
|
resource_size(host->mem), pdev->name);
|
|
|
|
if (!host->mem) {
|
|
dev_err(&pdev->dev, "failed to request io memory region.\n");
|
|
ret = -ENOENT;
|
|
goto probe_free_host;
|
|
}
|
|
|
|
host->base = ioremap(host->mem->start, resource_size(host->mem));
|
|
if (!host->base) {
|
|
dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
|
|
ret = -EINVAL;
|
|
goto probe_free_mem_region;
|
|
}
|
|
|
|
host->irq = platform_get_irq(pdev, 0);
|
|
if (host->irq <= 0) {
|
|
ret = -EINVAL;
|
|
goto probe_iounmap;
|
|
}
|
|
|
|
if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
|
|
dev_err(&pdev->dev, "failed to request mci interrupt.\n");
|
|
ret = -ENOENT;
|
|
goto probe_iounmap;
|
|
}
|
|
|
|
/* We get spurious interrupts even when we have set the IMSK
|
|
* register to ignore everything, so use disable_irq() to make
|
|
* ensure we don't lock the system with un-serviceable requests. */
|
|
|
|
disable_irq(host->irq);
|
|
host->irq_state = false;
|
|
|
|
/* Depending on the dma state, get a DMA channel to use. */
|
|
|
|
if (s3cmci_host_usedma(host)) {
|
|
host->dma = dma_request_chan(&pdev->dev, "rx-tx");
|
|
ret = PTR_ERR_OR_ZERO(host->dma);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot get DMA channel.\n");
|
|
goto probe_free_irq;
|
|
}
|
|
}
|
|
|
|
host->clk = clk_get(&pdev->dev, "sdi");
|
|
if (IS_ERR(host->clk)) {
|
|
dev_err(&pdev->dev, "failed to find clock source.\n");
|
|
ret = PTR_ERR(host->clk);
|
|
host->clk = NULL;
|
|
goto probe_free_dma;
|
|
}
|
|
|
|
ret = clk_prepare_enable(host->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable clock source.\n");
|
|
goto clk_free;
|
|
}
|
|
|
|
host->clk_rate = clk_get_rate(host->clk);
|
|
|
|
mmc->ops = &s3cmci_ops;
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
|
|
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
|
|
#else
|
|
mmc->caps = MMC_CAP_4_BIT_DATA;
|
|
#endif
|
|
mmc->f_min = host->clk_rate / (host->clk_div * 256);
|
|
mmc->f_max = host->clk_rate / host->clk_div;
|
|
|
|
if (host->pdata->ocr_avail)
|
|
mmc->ocr_avail = host->pdata->ocr_avail;
|
|
|
|
mmc->max_blk_count = 4095;
|
|
mmc->max_blk_size = 4095;
|
|
mmc->max_req_size = 4095 * 512;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
mmc->max_segs = 128;
|
|
|
|
dbg(host, dbg_debug,
|
|
"probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n",
|
|
(host->is2440?"2440":""),
|
|
host->base, host->irq, host->irq_cd, host->dma);
|
|
|
|
ret = s3cmci_cpufreq_register(host);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register cpufreq\n");
|
|
goto free_dmabuf;
|
|
}
|
|
|
|
ret = mmc_add_host(mmc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add mmc host.\n");
|
|
goto free_cpufreq;
|
|
}
|
|
|
|
s3cmci_debugfs_attach(host);
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
|
|
s3cmci_host_usedma(host) ? "dma" : "pio",
|
|
mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
|
|
|
|
return 0;
|
|
|
|
free_cpufreq:
|
|
s3cmci_cpufreq_deregister(host);
|
|
|
|
free_dmabuf:
|
|
clk_disable_unprepare(host->clk);
|
|
|
|
clk_free:
|
|
clk_put(host->clk);
|
|
|
|
probe_free_dma:
|
|
if (s3cmci_host_usedma(host))
|
|
dma_release_channel(host->dma);
|
|
|
|
probe_free_irq:
|
|
free_irq(host->irq, host);
|
|
|
|
probe_iounmap:
|
|
iounmap(host->base);
|
|
|
|
probe_free_mem_region:
|
|
release_mem_region(host->mem->start, resource_size(host->mem));
|
|
|
|
probe_free_host:
|
|
mmc_free_host(mmc);
|
|
|
|
probe_out:
|
|
return ret;
|
|
}
|
|
|
|
static void s3cmci_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
|
|
if (host->irq_cd >= 0)
|
|
free_irq(host->irq_cd, host);
|
|
|
|
s3cmci_debugfs_remove(host);
|
|
s3cmci_cpufreq_deregister(host);
|
|
mmc_remove_host(mmc);
|
|
clk_disable_unprepare(host->clk);
|
|
}
|
|
|
|
static int s3cmci_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
|
|
s3cmci_shutdown(pdev);
|
|
|
|
clk_put(host->clk);
|
|
|
|
tasklet_disable(&host->pio_tasklet);
|
|
|
|
if (s3cmci_host_usedma(host))
|
|
dma_release_channel(host->dma);
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
iounmap(host->base);
|
|
release_mem_region(host->mem->start, resource_size(host->mem));
|
|
|
|
mmc_free_host(mmc);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id s3cmci_dt_match[] = {
|
|
{
|
|
.compatible = "samsung,s3c2410-sdi",
|
|
.data = (void *)0,
|
|
},
|
|
{
|
|
.compatible = "samsung,s3c2412-sdi",
|
|
.data = (void *)1,
|
|
},
|
|
{
|
|
.compatible = "samsung,s3c2440-sdi",
|
|
.data = (void *)1,
|
|
},
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, s3cmci_dt_match);
|
|
|
|
static const struct platform_device_id s3cmci_driver_ids[] = {
|
|
{
|
|
.name = "s3c2410-sdi",
|
|
.driver_data = 0,
|
|
}, {
|
|
.name = "s3c2412-sdi",
|
|
.driver_data = 1,
|
|
}, {
|
|
.name = "s3c2440-sdi",
|
|
.driver_data = 1,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
|
|
|
|
static struct platform_driver s3cmci_driver = {
|
|
.driver = {
|
|
.name = "s3c-sdi",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = s3cmci_dt_match,
|
|
},
|
|
.id_table = s3cmci_driver_ids,
|
|
.probe = s3cmci_probe,
|
|
.remove = s3cmci_remove,
|
|
.shutdown = s3cmci_shutdown,
|
|
};
|
|
|
|
module_platform_driver(s3cmci_driver);
|
|
|
|
MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
|