Bruce Allan eab50ffb22 e1000e: Incorrect function pointer set for force_speed_duplex on 82577 ... The force_speed_duplex function pointer was incorrectly set. Instead of calling the 82577-specific version it was calling the m88 version which, among other incorrect things, reset the PHY causing autonegotiation to be re-enabled in the PHY resulting in the link defaulting to half-duplex. The 82577-specific force_speed_duplex function also had an issue where it disabled Auto-MDI-X which caused the link to not come up. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2010-05-12 23:31:12 -07:00
..
82571.c	e1000e: increase rx fifo size to 36K on 82574 and 82583	2010-05-05 21:15:31 -07:00
defines.h	e1000e: initialize manageability (IPMI) pass-through in 82574/82583	2010-05-12 23:31:10 -07:00
e1000.h	e1000e: save skb counts in TX to avoid cache misses	2010-05-05 21:11:25 -07:00
es2lan.c	e1000e: provide MAC-family-specific function to set LAN ID	2010-01-13 20:31:57 -08:00
ethtool.c	e1000e: bad state after running ethtool diagnostics with AMT enabled	2010-05-12 23:31:09 -07:00
hw.h	e1000e: initialize manageability (IPMI) pass-through in 82574/82583	2010-05-12 23:31:10 -07:00
ich8lan.c	e1000e: Incorrect function pointer set for force_speed_duplex on 82577	2010-05-12 23:31:12 -07:00
lib.c	e1000e: Remove EN_MAC_ADDR_FILTER check from enable_mng_pass_thru check	2010-05-12 23:31:11 -07:00
Makefile	e1000e: reformat comment blocks, cosmetic changes only	2008-03-28 22:14:56 -04:00
netdev.c	e1000e: s/w initiated LSC MSI-X interrupts not generated; no transmit	2010-05-12 23:31:10 -07:00
param.c	e1000e: use static params to save stack space (part 2)	2010-05-12 23:31:09 -07:00
phy.c	e1000e: Incorrect function pointer set for force_speed_duplex on 82577	2010-05-12 23:31:12 -07:00