mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
53da0ebaad
Currently DSA exposes the following sysfs:
$ cat /sys/class/net/eno2/dsa/tagging
ocelot
which is a read-only device attribute, introduced in the kernel as
commit 98cdb48071
("net: dsa: Expose tagging protocol to user-space"),
and used by libpcap since its commit 993db3800d7d ("Add support for DSA
link-layer types").
It would be nice if we could extend this device attribute by making it
writable:
$ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
This is useful with DSA switches that can make use of more than one
tagging protocol. It may be useful in dsa_loop in the future too, to
perform offline testing of various taggers, or for changing between dsa
and edsa on Marvell switches, if that is desirable.
In terms of implementation, drivers can support this feature by
implementing .change_tag_protocol, which should always leave the switch
in a consistent state: either with the new protocol if things went well,
or with the old one if something failed. Teardown of the old protocol,
if necessary, must be handled by the driver.
Some things remain as before:
- The .get_tag_protocol is currently only called at probe time, to load
the initial tagging protocol driver. Nonetheless, new drivers should
report the tagging protocol in current use now.
- The driver should manage by itself the initial setup of tagging
protocol, no later than the .setup() method, as well as destroying
resources used by the last tagger in use, no earlier than the
.teardown() method.
For multi-switch DSA trees, error handling is a bit more complicated,
since e.g. the 5th out of 7 switches may fail to change the tag
protocol. When that happens, a revert to the original tag protocol is
attempted, but that may fail too, leaving the tree in an inconsistent
state despite each individual switch implementing .change_tag_protocol
transactionally. Since the intersection between drivers that implement
.change_tag_protocol and drivers that support D in DSA is currently the
empty set, the possibility for this error to happen is ignored for now.
Testing:
$ insmod mscc_felix.ko
[ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14
[ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517
$ insmod tag_ocelot.ko
$ rmmod mscc_felix.ko
$ insmod mscc_felix.ko
[ 97.261724] libphy: VSC9959 internal MDIO bus: probed
[ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0
[ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1
[ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2
[ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3
[ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode
[ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0
[ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode
[ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1
[ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode
[ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 98.527948] device eno2 entered promiscuous mode
[ 98.544755] DSA: tree 0 setup
$ ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms
64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms
^C
- 10.0.0.1 ping statistics -
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.754/1.545/2.337 ms
$ cat /sys/class/net/eno2/dsa/tagging
ocelot
$ cat ./test_ocelot_8021q.sh
#!/bin/bash
ip link set swp0 down
ip link set swp1 down
ip link set swp2 down
ip link set swp3 down
ip link set swp5 down
ip link set eno2 down
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
ip link set eno2 up
ip link set swp0 up
ip link set swp1 up
ip link set swp2 up
ip link set swp3 up
ip link set swp5 up
$ ./test_ocelot_8021q.sh
./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available
$ rmmod tag_ocelot.ko
rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable
$ insmod tag_ocelot_8021q.ko
$ ./test_ocelot_8021q.sh
$ cat /sys/class/net/eno2/dsa/tagging
ocelot-8021q
$ rmmod tag_ocelot.ko
$ rmmod tag_ocelot_8021q.ko
rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable
$ ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms
64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms
64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms
$ rmmod mscc_felix.ko
[ 645.544426] mscc_felix 0000:00:00.5: Link is Down
[ 645.838608] DSA: tree 0 torn down
$ rmmod tag_ocelot_8021q.ko
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
871 lines
20 KiB
C
871 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Handling of a single switch port
|
|
*
|
|
* Copyright (c) 2017 Savoir-faire Linux Inc.
|
|
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
|
*/
|
|
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_net.h>
|
|
|
|
#include "dsa_priv.h"
|
|
|
|
/**
|
|
* dsa_port_notify - Notify the switching fabric of changes to a port
|
|
* @dp: port on which change occurred
|
|
* @e: event, must be of type DSA_NOTIFIER_*
|
|
* @v: event-specific value.
|
|
*
|
|
* Notify all switches in the DSA tree that this port's switch belongs to,
|
|
* including this switch itself, of an event. Allows the other switches to
|
|
* reconfigure themselves for cross-chip operations. Can also be used to
|
|
* reconfigure ports without net_devices (CPU ports, DSA links) whenever
|
|
* a user port's state changes.
|
|
*/
|
|
static int dsa_port_notify(const struct dsa_port *dp, unsigned long e, void *v)
|
|
{
|
|
return dsa_tree_notify(dp->ds->dst, e, v);
|
|
}
|
|
|
|
int dsa_port_set_state(struct dsa_port *dp, u8 state)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->port_stp_state_set)
|
|
return -EOPNOTSUPP;
|
|
|
|
ds->ops->port_stp_state_set(ds, port, state);
|
|
|
|
if (ds->ops->port_fast_age) {
|
|
/* Fast age FDB entries or flush appropriate forwarding database
|
|
* for the given port, if we are moving it from Learning or
|
|
* Forwarding state, to Disabled or Blocking or Listening state.
|
|
*/
|
|
|
|
if ((dp->stp_state == BR_STATE_LEARNING ||
|
|
dp->stp_state == BR_STATE_FORWARDING) &&
|
|
(state == BR_STATE_DISABLED ||
|
|
state == BR_STATE_BLOCKING ||
|
|
state == BR_STATE_LISTENING))
|
|
ds->ops->port_fast_age(ds, port);
|
|
}
|
|
|
|
dp->stp_state = state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_port_set_state_now(struct dsa_port *dp, u8 state)
|
|
{
|
|
int err;
|
|
|
|
err = dsa_port_set_state(dp, state);
|
|
if (err)
|
|
pr_err("DSA: failed to set STP state %u (%d)\n", state, err);
|
|
}
|
|
|
|
int dsa_port_enable_rt(struct dsa_port *dp, struct phy_device *phy)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
int err;
|
|
|
|
if (ds->ops->port_enable) {
|
|
err = ds->ops->port_enable(ds, port, phy);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (!dp->bridge_dev)
|
|
dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
|
|
|
|
if (dp->pl)
|
|
phylink_start(dp->pl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_port_enable(struct dsa_port *dp, struct phy_device *phy)
|
|
{
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
err = dsa_port_enable_rt(dp, phy);
|
|
rtnl_unlock();
|
|
|
|
return err;
|
|
}
|
|
|
|
void dsa_port_disable_rt(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (dp->pl)
|
|
phylink_stop(dp->pl);
|
|
|
|
if (!dp->bridge_dev)
|
|
dsa_port_set_state_now(dp, BR_STATE_DISABLED);
|
|
|
|
if (ds->ops->port_disable)
|
|
ds->ops->port_disable(ds, port);
|
|
}
|
|
|
|
void dsa_port_disable(struct dsa_port *dp)
|
|
{
|
|
rtnl_lock();
|
|
dsa_port_disable_rt(dp);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br)
|
|
{
|
|
struct dsa_notifier_bridge_info info = {
|
|
.tree_index = dp->ds->dst->index,
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.br = br,
|
|
};
|
|
int err;
|
|
|
|
/* Set the flooding mode before joining the port in the switch */
|
|
err = dsa_port_bridge_flags(dp, BR_FLOOD | BR_MCAST_FLOOD);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Here the interface is already bridged. Reflect the current
|
|
* configuration so that drivers can program their chips accordingly.
|
|
*/
|
|
dp->bridge_dev = br;
|
|
|
|
err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_JOIN, &info);
|
|
|
|
/* The bridging is rolled back on error */
|
|
if (err) {
|
|
dsa_port_bridge_flags(dp, 0);
|
|
dp->bridge_dev = NULL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br)
|
|
{
|
|
struct dsa_notifier_bridge_info info = {
|
|
.tree_index = dp->ds->dst->index,
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.br = br,
|
|
};
|
|
int err;
|
|
|
|
/* Here the port is already unbridged. Reflect the current configuration
|
|
* so that drivers can program their chips accordingly.
|
|
*/
|
|
dp->bridge_dev = NULL;
|
|
|
|
err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_LEAVE, &info);
|
|
if (err)
|
|
pr_err("DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE\n");
|
|
|
|
/* Port is leaving the bridge, disable flooding */
|
|
dsa_port_bridge_flags(dp, 0);
|
|
|
|
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
|
|
* so allow it to be in BR_STATE_FORWARDING to be kept functional
|
|
*/
|
|
dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
|
|
}
|
|
|
|
int dsa_port_lag_change(struct dsa_port *dp,
|
|
struct netdev_lag_lower_state_info *linfo)
|
|
{
|
|
struct dsa_notifier_lag_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
};
|
|
bool tx_enabled;
|
|
|
|
if (!dp->lag_dev)
|
|
return 0;
|
|
|
|
/* On statically configured aggregates (e.g. loadbalance
|
|
* without LACP) ports will always be tx_enabled, even if the
|
|
* link is down. Thus we require both link_up and tx_enabled
|
|
* in order to include it in the tx set.
|
|
*/
|
|
tx_enabled = linfo->link_up && linfo->tx_enabled;
|
|
|
|
if (tx_enabled == dp->lag_tx_enabled)
|
|
return 0;
|
|
|
|
dp->lag_tx_enabled = tx_enabled;
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_LAG_CHANGE, &info);
|
|
}
|
|
|
|
int dsa_port_lag_join(struct dsa_port *dp, struct net_device *lag,
|
|
struct netdev_lag_upper_info *uinfo)
|
|
{
|
|
struct dsa_notifier_lag_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.lag = lag,
|
|
.info = uinfo,
|
|
};
|
|
int err;
|
|
|
|
dsa_lag_map(dp->ds->dst, lag);
|
|
dp->lag_dev = lag;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_JOIN, &info);
|
|
if (err) {
|
|
dp->lag_dev = NULL;
|
|
dsa_lag_unmap(dp->ds->dst, lag);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
void dsa_port_lag_leave(struct dsa_port *dp, struct net_device *lag)
|
|
{
|
|
struct dsa_notifier_lag_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.lag = lag,
|
|
};
|
|
int err;
|
|
|
|
if (!dp->lag_dev)
|
|
return;
|
|
|
|
/* Port might have been part of a LAG that in turn was
|
|
* attached to a bridge.
|
|
*/
|
|
if (dp->bridge_dev)
|
|
dsa_port_bridge_leave(dp, dp->bridge_dev);
|
|
|
|
dp->lag_tx_enabled = false;
|
|
dp->lag_dev = NULL;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info);
|
|
if (err)
|
|
pr_err("DSA: failed to notify DSA_NOTIFIER_LAG_LEAVE: %d\n",
|
|
err);
|
|
|
|
dsa_lag_unmap(dp->ds->dst, lag);
|
|
}
|
|
|
|
/* Must be called under rcu_read_lock() */
|
|
static bool dsa_port_can_apply_vlan_filtering(struct dsa_port *dp,
|
|
bool vlan_filtering)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err, i;
|
|
|
|
/* VLAN awareness was off, so the question is "can we turn it on".
|
|
* We may have had 8021q uppers, those need to go. Make sure we don't
|
|
* enter an inconsistent state: deny changing the VLAN awareness state
|
|
* as long as we have 8021q uppers.
|
|
*/
|
|
if (vlan_filtering && dsa_is_user_port(ds, dp->index)) {
|
|
struct net_device *upper_dev, *slave = dp->slave;
|
|
struct net_device *br = dp->bridge_dev;
|
|
struct list_head *iter;
|
|
|
|
netdev_for_each_upper_dev_rcu(slave, upper_dev, iter) {
|
|
struct bridge_vlan_info br_info;
|
|
u16 vid;
|
|
|
|
if (!is_vlan_dev(upper_dev))
|
|
continue;
|
|
|
|
vid = vlan_dev_vlan_id(upper_dev);
|
|
|
|
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
|
|
* device, respectively the VID is not found, returning
|
|
* 0 means success, which is a failure for us here.
|
|
*/
|
|
err = br_vlan_get_info(br, vid, &br_info);
|
|
if (err == 0) {
|
|
dev_err(ds->dev, "Must remove upper %s first\n",
|
|
upper_dev->name);
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!ds->vlan_filtering_is_global)
|
|
return true;
|
|
|
|
/* For cases where enabling/disabling VLAN awareness is global to the
|
|
* switch, we need to handle the case where multiple bridges span
|
|
* different ports of the same switch device and one of them has a
|
|
* different setting than what is being requested.
|
|
*/
|
|
for (i = 0; i < ds->num_ports; i++) {
|
|
struct net_device *other_bridge;
|
|
|
|
other_bridge = dsa_to_port(ds, i)->bridge_dev;
|
|
if (!other_bridge)
|
|
continue;
|
|
/* If it's the same bridge, it also has same
|
|
* vlan_filtering setting => no need to check
|
|
*/
|
|
if (other_bridge == dp->bridge_dev)
|
|
continue;
|
|
if (br_vlan_enabled(other_bridge) != vlan_filtering) {
|
|
dev_err(ds->dev, "VLAN filtering is a global setting\n");
|
|
return false;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
bool apply;
|
|
int err;
|
|
|
|
if (!ds->ops->port_vlan_filtering)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* We are called from dsa_slave_switchdev_blocking_event(),
|
|
* which is not under rcu_read_lock(), unlike
|
|
* dsa_slave_switchdev_event().
|
|
*/
|
|
rcu_read_lock();
|
|
apply = dsa_port_can_apply_vlan_filtering(dp, vlan_filtering);
|
|
rcu_read_unlock();
|
|
if (!apply)
|
|
return -EINVAL;
|
|
|
|
if (dsa_port_is_vlan_filtering(dp) == vlan_filtering)
|
|
return 0;
|
|
|
|
err = ds->ops->port_vlan_filtering(ds, dp->index, vlan_filtering);
|
|
if (err)
|
|
return err;
|
|
|
|
if (ds->vlan_filtering_is_global)
|
|
ds->vlan_filtering = vlan_filtering;
|
|
else
|
|
dp->vlan_filtering = vlan_filtering;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This enforces legacy behavior for switch drivers which assume they can't
|
|
* receive VLAN configuration when enslaved to a bridge with vlan_filtering=0
|
|
*/
|
|
bool dsa_port_skip_vlan_configuration(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!dp->bridge_dev)
|
|
return false;
|
|
|
|
return (!ds->configure_vlan_while_not_filtering &&
|
|
!br_vlan_enabled(dp->bridge_dev));
|
|
}
|
|
|
|
int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock)
|
|
{
|
|
unsigned long ageing_jiffies = clock_t_to_jiffies(ageing_clock);
|
|
unsigned int ageing_time = jiffies_to_msecs(ageing_jiffies);
|
|
struct dsa_notifier_ageing_time_info info;
|
|
int err;
|
|
|
|
info.ageing_time = ageing_time;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_AGEING_TIME, &info);
|
|
if (err)
|
|
return err;
|
|
|
|
dp->ageing_time = ageing_time;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_port_pre_bridge_flags(const struct dsa_port *dp, unsigned long flags)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->port_egress_floods ||
|
|
(flags & ~(BR_FLOOD | BR_MCAST_FLOOD)))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_port_bridge_flags(const struct dsa_port *dp, unsigned long flags)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
int err = 0;
|
|
|
|
if (ds->ops->port_egress_floods)
|
|
err = ds->ops->port_egress_floods(ds, port, flags & BR_FLOOD,
|
|
flags & BR_MCAST_FLOOD);
|
|
|
|
return err;
|
|
}
|
|
|
|
int dsa_port_mrouter(struct dsa_port *dp, bool mrouter)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->port_egress_floods)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->port_egress_floods(ds, port, true, mrouter);
|
|
}
|
|
|
|
int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
|
|
bool propagate_upstream)
|
|
{
|
|
struct dsa_notifier_mtu_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.propagate_upstream = propagate_upstream,
|
|
.port = dp->index,
|
|
.mtu = new_mtu,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MTU, &info);
|
|
}
|
|
|
|
int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
|
|
u16 vid)
|
|
{
|
|
struct dsa_notifier_fdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.addr = addr,
|
|
.vid = vid,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_FDB_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_fdb_del(struct dsa_port *dp, const unsigned char *addr,
|
|
u16 vid)
|
|
{
|
|
struct dsa_notifier_fdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.addr = addr,
|
|
.vid = vid,
|
|
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_FDB_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_fdb_dump(struct dsa_port *dp, dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->port_fdb_dump)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->port_fdb_dump(ds, port, cb, data);
|
|
}
|
|
|
|
int dsa_port_mdb_add(const struct dsa_port *dp,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct dsa_notifier_mdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mdb = mdb,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MDB_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_mdb_del(const struct dsa_port *dp,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct dsa_notifier_mdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mdb = mdb,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MDB_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_vlan_add(struct dsa_port *dp,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct dsa_notifier_vlan_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.vlan = vlan,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_vlan_del(struct dsa_port *dp,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct dsa_notifier_vlan_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.vlan = vlan,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_DEL, &info);
|
|
}
|
|
|
|
void dsa_port_set_tag_protocol(struct dsa_port *cpu_dp,
|
|
const struct dsa_device_ops *tag_ops)
|
|
{
|
|
cpu_dp->filter = tag_ops->filter;
|
|
cpu_dp->rcv = tag_ops->rcv;
|
|
cpu_dp->tag_ops = tag_ops;
|
|
}
|
|
|
|
static struct phy_device *dsa_port_get_phy_device(struct dsa_port *dp)
|
|
{
|
|
struct device_node *phy_dn;
|
|
struct phy_device *phydev;
|
|
|
|
phy_dn = of_parse_phandle(dp->dn, "phy-handle", 0);
|
|
if (!phy_dn)
|
|
return NULL;
|
|
|
|
phydev = of_phy_find_device(phy_dn);
|
|
if (!phydev) {
|
|
of_node_put(phy_dn);
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
of_node_put(phy_dn);
|
|
return phydev;
|
|
}
|
|
|
|
static void dsa_port_phylink_validate(struct phylink_config *config,
|
|
unsigned long *supported,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_validate)
|
|
return;
|
|
|
|
ds->ops->phylink_validate(ds, dp->index, supported, state);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_pcs_get_state(struct phylink_config *config,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err;
|
|
|
|
/* Only called for inband modes */
|
|
if (!ds->ops->phylink_mac_link_state) {
|
|
state->link = 0;
|
|
return;
|
|
}
|
|
|
|
err = ds->ops->phylink_mac_link_state(ds, dp->index, state);
|
|
if (err < 0) {
|
|
dev_err(ds->dev, "p%d: phylink_mac_link_state() failed: %d\n",
|
|
dp->index, err);
|
|
state->link = 0;
|
|
}
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_config(struct phylink_config *config,
|
|
unsigned int mode,
|
|
const struct phylink_link_state *state)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_mac_config)
|
|
return;
|
|
|
|
ds->ops->phylink_mac_config(ds, dp->index, mode, state);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_an_restart(struct phylink_config *config)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_mac_an_restart)
|
|
return;
|
|
|
|
ds->ops->phylink_mac_an_restart(ds, dp->index);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_link_down(struct phylink_config *config,
|
|
unsigned int mode,
|
|
phy_interface_t interface)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct phy_device *phydev = NULL;
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (dsa_is_user_port(ds, dp->index))
|
|
phydev = dp->slave->phydev;
|
|
|
|
if (!ds->ops->phylink_mac_link_down) {
|
|
if (ds->ops->adjust_link && phydev)
|
|
ds->ops->adjust_link(ds, dp->index, phydev);
|
|
return;
|
|
}
|
|
|
|
ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
|
|
struct phy_device *phydev,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
int speed, int duplex,
|
|
bool tx_pause, bool rx_pause)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_mac_link_up) {
|
|
if (ds->ops->adjust_link && phydev)
|
|
ds->ops->adjust_link(ds, dp->index, phydev);
|
|
return;
|
|
}
|
|
|
|
ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev,
|
|
speed, duplex, tx_pause, rx_pause);
|
|
}
|
|
|
|
const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
|
|
.validate = dsa_port_phylink_validate,
|
|
.mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state,
|
|
.mac_config = dsa_port_phylink_mac_config,
|
|
.mac_an_restart = dsa_port_phylink_mac_an_restart,
|
|
.mac_link_down = dsa_port_phylink_mac_link_down,
|
|
.mac_link_up = dsa_port_phylink_mac_link_up,
|
|
};
|
|
|
|
static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct phy_device *phydev;
|
|
int port = dp->index;
|
|
int err = 0;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (!phydev)
|
|
return 0;
|
|
|
|
if (IS_ERR(phydev))
|
|
return PTR_ERR(phydev);
|
|
|
|
if (enable) {
|
|
err = genphy_resume(phydev);
|
|
if (err < 0)
|
|
goto err_put_dev;
|
|
|
|
err = genphy_read_status(phydev);
|
|
if (err < 0)
|
|
goto err_put_dev;
|
|
} else {
|
|
err = genphy_suspend(phydev);
|
|
if (err < 0)
|
|
goto err_put_dev;
|
|
}
|
|
|
|
if (ds->ops->adjust_link)
|
|
ds->ops->adjust_link(ds, port, phydev);
|
|
|
|
dev_dbg(ds->dev, "enabled port's phy: %s", phydev_name(phydev));
|
|
|
|
err_put_dev:
|
|
put_device(&phydev->mdio.dev);
|
|
return err;
|
|
}
|
|
|
|
static int dsa_port_fixed_link_register_of(struct dsa_port *dp)
|
|
{
|
|
struct device_node *dn = dp->dn;
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct phy_device *phydev;
|
|
int port = dp->index;
|
|
phy_interface_t mode;
|
|
int err;
|
|
|
|
err = of_phy_register_fixed_link(dn);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"failed to register the fixed PHY of port %d\n",
|
|
port);
|
|
return err;
|
|
}
|
|
|
|
phydev = of_phy_find_device(dn);
|
|
|
|
err = of_get_phy_mode(dn, &mode);
|
|
if (err)
|
|
mode = PHY_INTERFACE_MODE_NA;
|
|
phydev->interface = mode;
|
|
|
|
genphy_read_status(phydev);
|
|
|
|
if (ds->ops->adjust_link)
|
|
ds->ops->adjust_link(ds, port, phydev);
|
|
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_port_phylink_register(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct device_node *port_dn = dp->dn;
|
|
phy_interface_t mode;
|
|
int err;
|
|
|
|
err = of_get_phy_mode(port_dn, &mode);
|
|
if (err)
|
|
mode = PHY_INTERFACE_MODE_NA;
|
|
|
|
dp->pl_config.dev = ds->dev;
|
|
dp->pl_config.type = PHYLINK_DEV;
|
|
dp->pl_config.pcs_poll = ds->pcs_poll;
|
|
|
|
dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn),
|
|
mode, &dsa_port_phylink_mac_ops);
|
|
if (IS_ERR(dp->pl)) {
|
|
pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
|
|
return PTR_ERR(dp->pl);
|
|
}
|
|
|
|
err = phylink_of_phy_connect(dp->pl, port_dn, 0);
|
|
if (err && err != -ENODEV) {
|
|
pr_err("could not attach to PHY: %d\n", err);
|
|
goto err_phy_connect;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_phy_connect:
|
|
phylink_destroy(dp->pl);
|
|
return err;
|
|
}
|
|
|
|
int dsa_port_link_register_of(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct device_node *phy_np;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->adjust_link) {
|
|
phy_np = of_parse_phandle(dp->dn, "phy-handle", 0);
|
|
if (of_phy_is_fixed_link(dp->dn) || phy_np) {
|
|
if (ds->ops->phylink_mac_link_down)
|
|
ds->ops->phylink_mac_link_down(ds, port,
|
|
MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
|
|
return dsa_port_phylink_register(dp);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
dev_warn(ds->dev,
|
|
"Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return dsa_port_fixed_link_register_of(dp);
|
|
else
|
|
return dsa_port_setup_phy_of(dp, true);
|
|
}
|
|
|
|
void dsa_port_link_unregister_of(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->adjust_link && dp->pl) {
|
|
rtnl_lock();
|
|
phylink_disconnect_phy(dp->pl);
|
|
rtnl_unlock();
|
|
phylink_destroy(dp->pl);
|
|
dp->pl = NULL;
|
|
return;
|
|
}
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
of_phy_deregister_fixed_link(dp->dn);
|
|
else
|
|
dsa_port_setup_phy_of(dp, false);
|
|
}
|
|
|
|
int dsa_port_get_phy_strings(struct dsa_port *dp, uint8_t *data)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return ret;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (IS_ERR_OR_NULL(phydev))
|
|
return ret;
|
|
|
|
ret = phy_ethtool_get_strings(phydev, data);
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_port_get_phy_strings);
|
|
|
|
int dsa_port_get_ethtool_phy_stats(struct dsa_port *dp, uint64_t *data)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return ret;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (IS_ERR_OR_NULL(phydev))
|
|
return ret;
|
|
|
|
ret = phy_ethtool_get_stats(phydev, NULL, data);
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_port_get_ethtool_phy_stats);
|
|
|
|
int dsa_port_get_phy_sset_count(struct dsa_port *dp)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return ret;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (IS_ERR_OR_NULL(phydev))
|
|
return ret;
|
|
|
|
ret = phy_ethtool_get_sset_count(phydev);
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_port_get_phy_sset_count);
|