mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 17:54:13 +08:00
981c5b4a3b
The DualShock 4 touchpad has been measured to have a resolution of 44.86 dots/mm which equates to 1920x942. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2075 lines
74 KiB
C
2075 lines
74 KiB
C
/*
|
|
* HID driver for Sony / PS2 / PS3 / PS4 BD devices.
|
|
*
|
|
* Copyright (c) 1999 Andreas Gal
|
|
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
|
|
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
|
|
* Copyright (c) 2008 Jiri Slaby
|
|
* Copyright (c) 2012 David Dillow <dave@thedillows.org>
|
|
* Copyright (c) 2006-2013 Jiri Kosina
|
|
* Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
|
|
* Copyright (c) 2014 Frank Praznik <frank.praznik@gmail.com>
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*/
|
|
|
|
/*
|
|
* NOTE: in order for the Sony PS3 BD Remote Control to be found by
|
|
* a Bluetooth host, the key combination Start+Enter has to be kept pressed
|
|
* for about 7 seconds with the Bluetooth Host Controller in discovering mode.
|
|
*
|
|
* There will be no PIN request from the device.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/hid.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/list.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/input/mt.h>
|
|
|
|
#include "hid-ids.h"
|
|
|
|
#define VAIO_RDESC_CONSTANT BIT(0)
|
|
#define SIXAXIS_CONTROLLER_USB BIT(1)
|
|
#define SIXAXIS_CONTROLLER_BT BIT(2)
|
|
#define BUZZ_CONTROLLER BIT(3)
|
|
#define PS3REMOTE BIT(4)
|
|
#define DUALSHOCK4_CONTROLLER_USB BIT(5)
|
|
#define DUALSHOCK4_CONTROLLER_BT BIT(6)
|
|
|
|
#define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
|
|
#define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\
|
|
DUALSHOCK4_CONTROLLER_BT)
|
|
#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\
|
|
DUALSHOCK4_CONTROLLER)
|
|
#define SONY_BATTERY_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
|
|
#define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
|
|
|
|
#define MAX_LEDS 4
|
|
|
|
static __u8 sixaxis_rdesc[] = {
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x04, /* Usage (Joystik), */
|
|
0xA1, 0x01, /* Collection (Application), */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x85, 0x01, /* Report ID (1), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x81, 0x03, /* Input (Constant, Variable), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x13, /* Report Count (19), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x35, 0x00, /* Physical Minimum (0), */
|
|
0x45, 0x01, /* Physical Maximum (1), */
|
|
0x05, 0x09, /* Usage Page (Button), */
|
|
0x19, 0x01, /* Usage Minimum (01h), */
|
|
0x29, 0x13, /* Usage Maximum (13h), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x0D, /* Report Count (13), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x81, 0x03, /* Input (Constant, Variable), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x01, /* Usage (Pointer), */
|
|
0xA1, 0x00, /* Collection (Physical), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x04, /* Report Count (4), */
|
|
0x35, 0x00, /* Physical Minimum (0), */
|
|
0x46, 0xFF, 0x00, /* Physical Maximum (255), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x09, 0x32, /* Usage (Z), */
|
|
0x09, 0x35, /* Usage (Rz), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x95, 0x13, /* Report Count (19), */
|
|
0x09, 0x01, /* Usage (Pointer), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x95, 0x0C, /* Report Count (12), */
|
|
0x81, 0x01, /* Input (Constant), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x95, 0x04, /* Report Count (4), */
|
|
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
|
|
0x46, 0xFF, 0x03, /* Physical Maximum (1023), */
|
|
0x09, 0x01, /* Usage (Pointer), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x85, 0x02, /* Report ID (2), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x30, /* Report Count (48), */
|
|
0x09, 0x01, /* Usage (Pointer), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x85, 0xEE, /* Report ID (238), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x30, /* Report Count (48), */
|
|
0x09, 0x01, /* Usage (Pointer), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0xA1, 0x02, /* Collection (Logical), */
|
|
0x85, 0xEF, /* Report ID (239), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x30, /* Report Count (48), */
|
|
0x09, 0x01, /* Usage (Pointer), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0, /* End Collection, */
|
|
0xC0 /* End Collection */
|
|
};
|
|
|
|
/*
|
|
* The default descriptor doesn't provide mapping for the accelerometers
|
|
* or orientation sensors. This fixed descriptor maps the accelerometers
|
|
* to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors
|
|
* to usage values 0x43, 0x44 and 0x45.
|
|
*/
|
|
static u8 dualshock4_usb_rdesc[] = {
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x05, /* Usage (Gamepad), */
|
|
0xA1, 0x01, /* Collection (Application), */
|
|
0x85, 0x01, /* Report ID (1), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x09, 0x32, /* Usage (Z), */
|
|
0x09, 0x35, /* Usage (Rz), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x04, /* Report Count (4), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x39, /* Usage (Hat Switch), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x25, 0x07, /* Logical Maximum (7), */
|
|
0x35, 0x00, /* Physical Minimum (0), */
|
|
0x46, 0x3B, 0x01, /* Physical Maximum (315), */
|
|
0x65, 0x14, /* Unit (Degrees), */
|
|
0x75, 0x04, /* Report Size (4), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x42, /* Input (Variable, Null State), */
|
|
0x65, 0x00, /* Unit, */
|
|
0x05, 0x09, /* Usage Page (Button), */
|
|
0x19, 0x01, /* Usage Minimum (01h), */
|
|
0x29, 0x0E, /* Usage Maximum (0Eh), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x0E, /* Report Count (14), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0x20, /* Usage (20h), */
|
|
0x75, 0x06, /* Report Size (6), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x25, 0x3F, /* Logical Maximum (63), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x33, /* Usage (Rx), */
|
|
0x09, 0x34, /* Usage (Ry), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0x21, /* Usage (21h), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x19, 0x40, /* Usage Minimum (40h), */
|
|
0x29, 0x42, /* Usage Maximum (42h), */
|
|
0x16, 0x00, 0x80, /* Logical Minimum (-32768), */
|
|
0x26, 0x00, 0x7F, /* Logical Maximum (32767), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x19, 0x43, /* Usage Minimum (43h), */
|
|
0x29, 0x45, /* Usage Maximum (45h), */
|
|
0x16, 0x00, 0xE0, /* Logical Minimum (-8192), */
|
|
0x26, 0xFF, 0x1F, /* Logical Maximum (8191), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0x21, /* Usage (21h), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x27, /* Report Count (39), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x85, 0x05, /* Report ID (5), */
|
|
0x09, 0x22, /* Usage (22h), */
|
|
0x95, 0x1F, /* Report Count (31), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x04, /* Report ID (4), */
|
|
0x09, 0x23, /* Usage (23h), */
|
|
0x95, 0x24, /* Report Count (36), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x02, /* Report ID (2), */
|
|
0x09, 0x24, /* Usage (24h), */
|
|
0x95, 0x24, /* Report Count (36), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x08, /* Report ID (8), */
|
|
0x09, 0x25, /* Usage (25h), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x10, /* Report ID (16), */
|
|
0x09, 0x26, /* Usage (26h), */
|
|
0x95, 0x04, /* Report Count (4), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x11, /* Report ID (17), */
|
|
0x09, 0x27, /* Usage (27h), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x12, /* Report ID (18), */
|
|
0x06, 0x02, 0xFF, /* Usage Page (FF02h), */
|
|
0x09, 0x21, /* Usage (21h), */
|
|
0x95, 0x0F, /* Report Count (15), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x13, /* Report ID (19), */
|
|
0x09, 0x22, /* Usage (22h), */
|
|
0x95, 0x16, /* Report Count (22), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x14, /* Report ID (20), */
|
|
0x06, 0x05, 0xFF, /* Usage Page (FF05h), */
|
|
0x09, 0x20, /* Usage (20h), */
|
|
0x95, 0x10, /* Report Count (16), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x15, /* Report ID (21), */
|
|
0x09, 0x21, /* Usage (21h), */
|
|
0x95, 0x2C, /* Report Count (44), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
|
|
0x85, 0x80, /* Report ID (128), */
|
|
0x09, 0x20, /* Usage (20h), */
|
|
0x95, 0x06, /* Report Count (6), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x81, /* Report ID (129), */
|
|
0x09, 0x21, /* Usage (21h), */
|
|
0x95, 0x06, /* Report Count (6), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x82, /* Report ID (130), */
|
|
0x09, 0x22, /* Usage (22h), */
|
|
0x95, 0x05, /* Report Count (5), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x83, /* Report ID (131), */
|
|
0x09, 0x23, /* Usage (23h), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x84, /* Report ID (132), */
|
|
0x09, 0x24, /* Usage (24h), */
|
|
0x95, 0x04, /* Report Count (4), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x85, /* Report ID (133), */
|
|
0x09, 0x25, /* Usage (25h), */
|
|
0x95, 0x06, /* Report Count (6), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x86, /* Report ID (134), */
|
|
0x09, 0x26, /* Usage (26h), */
|
|
0x95, 0x06, /* Report Count (6), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x87, /* Report ID (135), */
|
|
0x09, 0x27, /* Usage (27h), */
|
|
0x95, 0x23, /* Report Count (35), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x88, /* Report ID (136), */
|
|
0x09, 0x28, /* Usage (28h), */
|
|
0x95, 0x22, /* Report Count (34), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x89, /* Report ID (137), */
|
|
0x09, 0x29, /* Usage (29h), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x90, /* Report ID (144), */
|
|
0x09, 0x30, /* Usage (30h), */
|
|
0x95, 0x05, /* Report Count (5), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x91, /* Report ID (145), */
|
|
0x09, 0x31, /* Usage (31h), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x92, /* Report ID (146), */
|
|
0x09, 0x32, /* Usage (32h), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x93, /* Report ID (147), */
|
|
0x09, 0x33, /* Usage (33h), */
|
|
0x95, 0x0C, /* Report Count (12), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA0, /* Report ID (160), */
|
|
0x09, 0x40, /* Usage (40h), */
|
|
0x95, 0x06, /* Report Count (6), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA1, /* Report ID (161), */
|
|
0x09, 0x41, /* Usage (41h), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA2, /* Report ID (162), */
|
|
0x09, 0x42, /* Usage (42h), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA3, /* Report ID (163), */
|
|
0x09, 0x43, /* Usage (43h), */
|
|
0x95, 0x30, /* Report Count (48), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA4, /* Report ID (164), */
|
|
0x09, 0x44, /* Usage (44h), */
|
|
0x95, 0x0D, /* Report Count (13), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA5, /* Report ID (165), */
|
|
0x09, 0x45, /* Usage (45h), */
|
|
0x95, 0x15, /* Report Count (21), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA6, /* Report ID (166), */
|
|
0x09, 0x46, /* Usage (46h), */
|
|
0x95, 0x15, /* Report Count (21), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xF0, /* Report ID (240), */
|
|
0x09, 0x47, /* Usage (47h), */
|
|
0x95, 0x3F, /* Report Count (63), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xF1, /* Report ID (241), */
|
|
0x09, 0x48, /* Usage (48h), */
|
|
0x95, 0x3F, /* Report Count (63), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xF2, /* Report ID (242), */
|
|
0x09, 0x49, /* Usage (49h), */
|
|
0x95, 0x0F, /* Report Count (15), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA7, /* Report ID (167), */
|
|
0x09, 0x4A, /* Usage (4Ah), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA8, /* Report ID (168), */
|
|
0x09, 0x4B, /* Usage (4Bh), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA9, /* Report ID (169), */
|
|
0x09, 0x4C, /* Usage (4Ch), */
|
|
0x95, 0x08, /* Report Count (8), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xAA, /* Report ID (170), */
|
|
0x09, 0x4E, /* Usage (4Eh), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xAB, /* Report ID (171), */
|
|
0x09, 0x4F, /* Usage (4Fh), */
|
|
0x95, 0x39, /* Report Count (57), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xAC, /* Report ID (172), */
|
|
0x09, 0x50, /* Usage (50h), */
|
|
0x95, 0x39, /* Report Count (57), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xAD, /* Report ID (173), */
|
|
0x09, 0x51, /* Usage (51h), */
|
|
0x95, 0x0B, /* Report Count (11), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xAE, /* Report ID (174), */
|
|
0x09, 0x52, /* Usage (52h), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xAF, /* Report ID (175), */
|
|
0x09, 0x53, /* Usage (53h), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xB0, /* Report ID (176), */
|
|
0x09, 0x54, /* Usage (54h), */
|
|
0x95, 0x3F, /* Report Count (63), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0 /* End Collection */
|
|
};
|
|
|
|
/*
|
|
* The default behavior of the Dualshock 4 is to send reports using report
|
|
* type 1 when running over Bluetooth. However, when feature report 2 is
|
|
* requested during the controller initialization it starts sending input
|
|
* reports in report 17. Since report 17 is undefined in the default HID
|
|
* descriptor the button and axis definitions must be moved to report 17 or
|
|
* the HID layer won't process the received input.
|
|
*/
|
|
static u8 dualshock4_bt_rdesc[] = {
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x05, /* Usage (Gamepad), */
|
|
0xA1, 0x01, /* Collection (Application), */
|
|
0x85, 0x01, /* Report ID (1), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x0A, /* Report Count (9), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x06, 0x04, 0xFF, /* Usage Page (FF04h), */
|
|
0x85, 0x02, /* Report ID (2), */
|
|
0x09, 0x24, /* Usage (24h), */
|
|
0x95, 0x24, /* Report Count (36), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA3, /* Report ID (163), */
|
|
0x09, 0x25, /* Usage (25h), */
|
|
0x95, 0x30, /* Report Count (48), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x05, /* Report ID (5), */
|
|
0x09, 0x26, /* Usage (26h), */
|
|
0x95, 0x28, /* Report Count (40), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x06, /* Report ID (6), */
|
|
0x09, 0x27, /* Usage (27h), */
|
|
0x95, 0x34, /* Report Count (52), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x07, /* Report ID (7), */
|
|
0x09, 0x28, /* Usage (28h), */
|
|
0x95, 0x30, /* Report Count (48), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x08, /* Report ID (8), */
|
|
0x09, 0x29, /* Usage (29h), */
|
|
0x95, 0x2F, /* Report Count (47), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x06, 0x03, 0xFF, /* Usage Page (FF03h), */
|
|
0x85, 0x03, /* Report ID (3), */
|
|
0x09, 0x21, /* Usage (21h), */
|
|
0x95, 0x26, /* Report Count (38), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x04, /* Report ID (4), */
|
|
0x09, 0x22, /* Usage (22h), */
|
|
0x95, 0x2E, /* Report Count (46), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xF0, /* Report ID (240), */
|
|
0x09, 0x47, /* Usage (47h), */
|
|
0x95, 0x3F, /* Report Count (63), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xF1, /* Report ID (241), */
|
|
0x09, 0x48, /* Usage (48h), */
|
|
0x95, 0x3F, /* Report Count (63), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xF2, /* Report ID (242), */
|
|
0x09, 0x49, /* Usage (49h), */
|
|
0x95, 0x0F, /* Report Count (15), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x11, /* Report ID (17), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0x20, /* Usage (20h), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x30, /* Usage (X), */
|
|
0x09, 0x31, /* Usage (Y), */
|
|
0x09, 0x32, /* Usage (Z), */
|
|
0x09, 0x35, /* Usage (Rz), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x04, /* Report Count (4), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x39, /* Usage (Hat Switch), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x25, 0x07, /* Logical Maximum (7), */
|
|
0x75, 0x04, /* Report Size (4), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x42, /* Input (Variable, Null State), */
|
|
0x05, 0x09, /* Usage Page (Button), */
|
|
0x19, 0x01, /* Usage Minimum (01h), */
|
|
0x29, 0x0E, /* Usage Maximum (0Eh), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x25, 0x01, /* Logical Maximum (1), */
|
|
0x75, 0x01, /* Report Size (1), */
|
|
0x95, 0x0E, /* Report Count (14), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x75, 0x06, /* Report Size (6), */
|
|
0x95, 0x01, /* Report Count (1), */
|
|
0x81, 0x01, /* Input (Constant), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x09, 0x33, /* Usage (Rx), */
|
|
0x09, 0x34, /* Usage (Ry), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x02, /* Report Count (2), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0x20, /* Usage (20h), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x05, 0x01, /* Usage Page (Desktop), */
|
|
0x19, 0x40, /* Usage Minimum (40h), */
|
|
0x29, 0x42, /* Usage Maximum (42h), */
|
|
0x16, 0x00, 0x80, /* Logical Minimum (-32768), */
|
|
0x26, 0x00, 0x7F, /* Logical Maximum (32767), */
|
|
0x75, 0x10, /* Report Size (16), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x19, 0x43, /* Usage Minimum (43h), */
|
|
0x29, 0x45, /* Usage Maximum (45h), */
|
|
0x16, 0x00, 0xE0, /* Logical Minimum (-8192), */
|
|
0x26, 0xFF, 0x1F, /* Logical Maximum (8191), */
|
|
0x95, 0x03, /* Report Count (3), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
|
|
0x09, 0x20, /* Usage (20h), */
|
|
0x15, 0x00, /* Logical Minimum (0), */
|
|
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x31, /* Report Count (51), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x21, /* Usage (21h), */
|
|
0x75, 0x08, /* Report Size (8), */
|
|
0x95, 0x4D, /* Report Count (77), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x12, /* Report ID (18), */
|
|
0x09, 0x22, /* Usage (22h), */
|
|
0x95, 0x8D, /* Report Count (141), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x23, /* Usage (23h), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x13, /* Report ID (19), */
|
|
0x09, 0x24, /* Usage (24h), */
|
|
0x95, 0xCD, /* Report Count (205), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x25, /* Usage (25h), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x14, /* Report ID (20), */
|
|
0x09, 0x26, /* Usage (26h), */
|
|
0x96, 0x0D, 0x01, /* Report Count (269), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x27, /* Usage (27h), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x15, /* Report ID (21), */
|
|
0x09, 0x28, /* Usage (28h), */
|
|
0x96, 0x4D, 0x01, /* Report Count (333), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x29, /* Usage (29h), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x16, /* Report ID (22), */
|
|
0x09, 0x2A, /* Usage (2Ah), */
|
|
0x96, 0x8D, 0x01, /* Report Count (397), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x2B, /* Usage (2Bh), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x17, /* Report ID (23), */
|
|
0x09, 0x2C, /* Usage (2Ch), */
|
|
0x96, 0xCD, 0x01, /* Report Count (461), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x2D, /* Usage (2Dh), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x18, /* Report ID (24), */
|
|
0x09, 0x2E, /* Usage (2Eh), */
|
|
0x96, 0x0D, 0x02, /* Report Count (525), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x2F, /* Usage (2Fh), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x85, 0x19, /* Report ID (25), */
|
|
0x09, 0x30, /* Usage (30h), */
|
|
0x96, 0x22, 0x02, /* Report Count (546), */
|
|
0x81, 0x02, /* Input (Variable), */
|
|
0x09, 0x31, /* Usage (31h), */
|
|
0x91, 0x02, /* Output (Variable), */
|
|
0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
|
|
0x85, 0x82, /* Report ID (130), */
|
|
0x09, 0x22, /* Usage (22h), */
|
|
0x95, 0x3F, /* Report Count (63), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x83, /* Report ID (131), */
|
|
0x09, 0x23, /* Usage (23h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x84, /* Report ID (132), */
|
|
0x09, 0x24, /* Usage (24h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x90, /* Report ID (144), */
|
|
0x09, 0x30, /* Usage (30h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x91, /* Report ID (145), */
|
|
0x09, 0x31, /* Usage (31h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x92, /* Report ID (146), */
|
|
0x09, 0x32, /* Usage (32h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0x93, /* Report ID (147), */
|
|
0x09, 0x33, /* Usage (33h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA0, /* Report ID (160), */
|
|
0x09, 0x40, /* Usage (40h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0x85, 0xA4, /* Report ID (164), */
|
|
0x09, 0x44, /* Usage (44h), */
|
|
0xB1, 0x02, /* Feature (Variable), */
|
|
0xC0 /* End Collection */
|
|
};
|
|
|
|
static __u8 ps3remote_rdesc[] = {
|
|
0x05, 0x01, /* GUsagePage Generic Desktop */
|
|
0x09, 0x05, /* LUsage 0x05 [Game Pad] */
|
|
0xA1, 0x01, /* MCollection Application (mouse, keyboard) */
|
|
|
|
/* Use collection 1 for joypad buttons */
|
|
0xA1, 0x02, /* MCollection Logical (interrelated data) */
|
|
|
|
/* Ignore the 1st byte, maybe it is used for a controller
|
|
* number but it's not needed for correct operation */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x01, /* GReportCount 0x01 [1] */
|
|
0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
|
|
|
|
/* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
|
|
* buttons multiple keypresses are allowed */
|
|
0x05, 0x09, /* GUsagePage Button */
|
|
0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
|
|
0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */
|
|
0x14, /* GLogicalMinimum [0] */
|
|
0x25, 0x01, /* GLogicalMaximum 0x01 [1] */
|
|
0x75, 0x01, /* GReportSize 0x01 [1] */
|
|
0x95, 0x18, /* GReportCount 0x18 [24] */
|
|
0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
|
|
|
|
0xC0, /* MEndCollection */
|
|
|
|
/* Use collection 2 for remote control buttons */
|
|
0xA1, 0x02, /* MCollection Logical (interrelated data) */
|
|
|
|
/* 5th byte is used for remote control buttons */
|
|
0x05, 0x09, /* GUsagePage Button */
|
|
0x18, /* LUsageMinimum [No button pressed] */
|
|
0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */
|
|
0x14, /* GLogicalMinimum [0] */
|
|
0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x01, /* GReportCount 0x01 [1] */
|
|
0x80, /* MInput */
|
|
|
|
/* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
|
|
* 0xff and 11th is for press indication */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x06, /* GReportCount 0x06 [6] */
|
|
0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
|
|
|
|
/* 12th byte is for battery strength */
|
|
0x05, 0x06, /* GUsagePage Generic Device Controls */
|
|
0x09, 0x20, /* LUsage 0x20 [Battery Strength] */
|
|
0x14, /* GLogicalMinimum [0] */
|
|
0x25, 0x05, /* GLogicalMaximum 0x05 [5] */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x01, /* GReportCount 0x01 [1] */
|
|
0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
|
|
|
|
0xC0, /* MEndCollection */
|
|
|
|
0xC0 /* MEndCollection [Game Pad] */
|
|
};
|
|
|
|
static const unsigned int ps3remote_keymap_joypad_buttons[] = {
|
|
[0x01] = KEY_SELECT,
|
|
[0x02] = BTN_THUMBL, /* L3 */
|
|
[0x03] = BTN_THUMBR, /* R3 */
|
|
[0x04] = BTN_START,
|
|
[0x05] = KEY_UP,
|
|
[0x06] = KEY_RIGHT,
|
|
[0x07] = KEY_DOWN,
|
|
[0x08] = KEY_LEFT,
|
|
[0x09] = BTN_TL2, /* L2 */
|
|
[0x0a] = BTN_TR2, /* R2 */
|
|
[0x0b] = BTN_TL, /* L1 */
|
|
[0x0c] = BTN_TR, /* R1 */
|
|
[0x0d] = KEY_OPTION, /* options/triangle */
|
|
[0x0e] = KEY_BACK, /* back/circle */
|
|
[0x0f] = BTN_0, /* cross */
|
|
[0x10] = KEY_SCREEN, /* view/square */
|
|
[0x11] = KEY_HOMEPAGE, /* PS button */
|
|
[0x14] = KEY_ENTER,
|
|
};
|
|
static const unsigned int ps3remote_keymap_remote_buttons[] = {
|
|
[0x00] = KEY_1,
|
|
[0x01] = KEY_2,
|
|
[0x02] = KEY_3,
|
|
[0x03] = KEY_4,
|
|
[0x04] = KEY_5,
|
|
[0x05] = KEY_6,
|
|
[0x06] = KEY_7,
|
|
[0x07] = KEY_8,
|
|
[0x08] = KEY_9,
|
|
[0x09] = KEY_0,
|
|
[0x0e] = KEY_ESC, /* return */
|
|
[0x0f] = KEY_CLEAR,
|
|
[0x16] = KEY_EJECTCD,
|
|
[0x1a] = KEY_MENU, /* top menu */
|
|
[0x28] = KEY_TIME,
|
|
[0x30] = KEY_PREVIOUS,
|
|
[0x31] = KEY_NEXT,
|
|
[0x32] = KEY_PLAY,
|
|
[0x33] = KEY_REWIND, /* scan back */
|
|
[0x34] = KEY_FORWARD, /* scan forward */
|
|
[0x38] = KEY_STOP,
|
|
[0x39] = KEY_PAUSE,
|
|
[0x40] = KEY_CONTEXT_MENU, /* pop up/menu */
|
|
[0x60] = KEY_FRAMEBACK, /* slow/step back */
|
|
[0x61] = KEY_FRAMEFORWARD, /* slow/step forward */
|
|
[0x63] = KEY_SUBTITLE,
|
|
[0x64] = KEY_AUDIO,
|
|
[0x65] = KEY_ANGLE,
|
|
[0x70] = KEY_INFO, /* display */
|
|
[0x80] = KEY_BLUE,
|
|
[0x81] = KEY_RED,
|
|
[0x82] = KEY_GREEN,
|
|
[0x83] = KEY_YELLOW,
|
|
};
|
|
|
|
static const unsigned int buzz_keymap[] = {
|
|
/*
|
|
* The controller has 4 remote buzzers, each with one LED and 5
|
|
* buttons.
|
|
*
|
|
* We use the mapping chosen by the controller, which is:
|
|
*
|
|
* Key Offset
|
|
* -------------------
|
|
* Buzz 1
|
|
* Blue 5
|
|
* Orange 4
|
|
* Green 3
|
|
* Yellow 2
|
|
*
|
|
* So, for example, the orange button on the third buzzer is mapped to
|
|
* BTN_TRIGGER_HAPPY14
|
|
*/
|
|
[ 1] = BTN_TRIGGER_HAPPY1,
|
|
[ 2] = BTN_TRIGGER_HAPPY2,
|
|
[ 3] = BTN_TRIGGER_HAPPY3,
|
|
[ 4] = BTN_TRIGGER_HAPPY4,
|
|
[ 5] = BTN_TRIGGER_HAPPY5,
|
|
[ 6] = BTN_TRIGGER_HAPPY6,
|
|
[ 7] = BTN_TRIGGER_HAPPY7,
|
|
[ 8] = BTN_TRIGGER_HAPPY8,
|
|
[ 9] = BTN_TRIGGER_HAPPY9,
|
|
[10] = BTN_TRIGGER_HAPPY10,
|
|
[11] = BTN_TRIGGER_HAPPY11,
|
|
[12] = BTN_TRIGGER_HAPPY12,
|
|
[13] = BTN_TRIGGER_HAPPY13,
|
|
[14] = BTN_TRIGGER_HAPPY14,
|
|
[15] = BTN_TRIGGER_HAPPY15,
|
|
[16] = BTN_TRIGGER_HAPPY16,
|
|
[17] = BTN_TRIGGER_HAPPY17,
|
|
[18] = BTN_TRIGGER_HAPPY18,
|
|
[19] = BTN_TRIGGER_HAPPY19,
|
|
[20] = BTN_TRIGGER_HAPPY20,
|
|
};
|
|
|
|
static enum power_supply_property sony_battery_props[] = {
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_SCOPE,
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
};
|
|
|
|
struct sixaxis_led {
|
|
__u8 time_enabled; /* the total time the led is active (0xff means forever) */
|
|
__u8 duty_length; /* how long a cycle is in deciseconds (0 means "really fast") */
|
|
__u8 enabled;
|
|
__u8 duty_off; /* % of duty_length the led is off (0xff means 100%) */
|
|
__u8 duty_on; /* % of duty_length the led is on (0xff mean 100%) */
|
|
} __packed;
|
|
|
|
struct sixaxis_rumble {
|
|
__u8 padding;
|
|
__u8 right_duration; /* Right motor duration (0xff means forever) */
|
|
__u8 right_motor_on; /* Right (small) motor on/off, only supports values of 0 or 1 (off/on) */
|
|
__u8 left_duration; /* Left motor duration (0xff means forever) */
|
|
__u8 left_motor_force; /* left (large) motor, supports force values from 0 to 255 */
|
|
} __packed;
|
|
|
|
struct sixaxis_output_report {
|
|
__u8 report_id;
|
|
struct sixaxis_rumble rumble;
|
|
__u8 padding[4];
|
|
__u8 leds_bitmap; /* bitmap of enabled LEDs: LED_1 = 0x02, LED_2 = 0x04, ... */
|
|
struct sixaxis_led led[4]; /* LEDx at (4 - x) */
|
|
struct sixaxis_led _reserved; /* LED5, not actually soldered */
|
|
} __packed;
|
|
|
|
union sixaxis_output_report_01 {
|
|
struct sixaxis_output_report data;
|
|
__u8 buf[36];
|
|
};
|
|
|
|
static spinlock_t sony_dev_list_lock;
|
|
static LIST_HEAD(sony_device_list);
|
|
static DEFINE_IDA(sony_device_id_allocator);
|
|
|
|
struct sony_sc {
|
|
spinlock_t lock;
|
|
struct list_head list_node;
|
|
struct hid_device *hdev;
|
|
struct led_classdev *leds[MAX_LEDS];
|
|
unsigned long quirks;
|
|
struct work_struct state_worker;
|
|
struct power_supply battery;
|
|
int device_id;
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
__u8 left;
|
|
__u8 right;
|
|
#endif
|
|
|
|
__u8 mac_address[6];
|
|
__u8 worker_initialized;
|
|
__u8 cable_state;
|
|
__u8 battery_charging;
|
|
__u8 battery_capacity;
|
|
__u8 led_state[MAX_LEDS];
|
|
__u8 led_delay_on[MAX_LEDS];
|
|
__u8 led_delay_off[MAX_LEDS];
|
|
__u8 led_count;
|
|
};
|
|
|
|
static __u8 *sixaxis_fixup(struct hid_device *hdev, __u8 *rdesc,
|
|
unsigned int *rsize)
|
|
{
|
|
*rsize = sizeof(sixaxis_rdesc);
|
|
return sixaxis_rdesc;
|
|
}
|
|
|
|
static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
|
|
unsigned int *rsize)
|
|
{
|
|
*rsize = sizeof(ps3remote_rdesc);
|
|
return ps3remote_rdesc;
|
|
}
|
|
|
|
static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
|
|
struct hid_field *field, struct hid_usage *usage,
|
|
unsigned long **bit, int *max)
|
|
{
|
|
unsigned int key = usage->hid & HID_USAGE;
|
|
|
|
if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
|
|
return -1;
|
|
|
|
switch (usage->collection_index) {
|
|
case 1:
|
|
if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
|
|
return -1;
|
|
|
|
key = ps3remote_keymap_joypad_buttons[key];
|
|
if (!key)
|
|
return -1;
|
|
break;
|
|
case 2:
|
|
if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
|
|
return -1;
|
|
|
|
key = ps3remote_keymap_remote_buttons[key];
|
|
if (!key)
|
|
return -1;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
|
|
return 1;
|
|
}
|
|
|
|
static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
|
|
unsigned int *rsize)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
/*
|
|
* Some Sony RF receivers wrongly declare the mouse pointer as a
|
|
* a constant non-data variable.
|
|
*/
|
|
if ((sc->quirks & VAIO_RDESC_CONSTANT) && *rsize >= 56 &&
|
|
/* usage page: generic desktop controls */
|
|
/* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */
|
|
/* usage: mouse */
|
|
rdesc[2] == 0x09 && rdesc[3] == 0x02 &&
|
|
/* input (usage page for x,y axes): constant, variable, relative */
|
|
rdesc[54] == 0x81 && rdesc[55] == 0x07) {
|
|
hid_info(hdev, "Fixing up Sony RF Receiver report descriptor\n");
|
|
/* input: data, variable, relative */
|
|
rdesc[55] = 0x06;
|
|
}
|
|
|
|
/*
|
|
* The default Dualshock 4 USB descriptor doesn't assign
|
|
* the gyroscope values to corresponding axes so we need a
|
|
* modified one.
|
|
*/
|
|
if ((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && *rsize == 467) {
|
|
hid_info(hdev, "Using modified Dualshock 4 report descriptor with gyroscope axes\n");
|
|
rdesc = dualshock4_usb_rdesc;
|
|
*rsize = sizeof(dualshock4_usb_rdesc);
|
|
} else if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) && *rsize == 357) {
|
|
hid_info(hdev, "Using modified Dualshock 4 Bluetooth report descriptor\n");
|
|
rdesc = dualshock4_bt_rdesc;
|
|
*rsize = sizeof(dualshock4_bt_rdesc);
|
|
}
|
|
|
|
if (sc->quirks & SIXAXIS_CONTROLLER)
|
|
return sixaxis_fixup(hdev, rdesc, rsize);
|
|
|
|
if (sc->quirks & PS3REMOTE)
|
|
return ps3remote_fixup(hdev, rdesc, rsize);
|
|
|
|
return rdesc;
|
|
}
|
|
|
|
static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size)
|
|
{
|
|
static const __u8 sixaxis_battery_capacity[] = { 0, 1, 25, 50, 75, 100 };
|
|
unsigned long flags;
|
|
__u8 cable_state, battery_capacity, battery_charging;
|
|
|
|
/*
|
|
* The sixaxis is charging if the battery value is 0xee
|
|
* and it is fully charged if the value is 0xef.
|
|
* It does not report the actual level while charging so it
|
|
* is set to 100% while charging is in progress.
|
|
*/
|
|
if (rd[30] >= 0xee) {
|
|
battery_capacity = 100;
|
|
battery_charging = !(rd[30] & 0x01);
|
|
cable_state = 1;
|
|
} else {
|
|
__u8 index = rd[30] <= 5 ? rd[30] : 5;
|
|
battery_capacity = sixaxis_battery_capacity[index];
|
|
battery_charging = 0;
|
|
cable_state = 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&sc->lock, flags);
|
|
sc->cable_state = cable_state;
|
|
sc->battery_capacity = battery_capacity;
|
|
sc->battery_charging = battery_charging;
|
|
spin_unlock_irqrestore(&sc->lock, flags);
|
|
}
|
|
|
|
static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size)
|
|
{
|
|
struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
|
|
struct hid_input, list);
|
|
struct input_dev *input_dev = hidinput->input;
|
|
unsigned long flags;
|
|
int n, offset;
|
|
__u8 cable_state, battery_capacity, battery_charging;
|
|
|
|
/*
|
|
* Battery and touchpad data starts at byte 30 in the USB report and
|
|
* 32 in Bluetooth report.
|
|
*/
|
|
offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32;
|
|
|
|
/*
|
|
* The lower 4 bits of byte 30 contain the battery level
|
|
* and the 5th bit contains the USB cable state.
|
|
*/
|
|
cable_state = (rd[offset] >> 4) & 0x01;
|
|
battery_capacity = rd[offset] & 0x0F;
|
|
|
|
/*
|
|
* When a USB power source is connected the battery level ranges from
|
|
* 0 to 10, and when running on battery power it ranges from 0 to 9.
|
|
* A battery level above 10 when plugged in means charge completed.
|
|
*/
|
|
if (!cable_state || battery_capacity > 10)
|
|
battery_charging = 0;
|
|
else
|
|
battery_charging = 1;
|
|
|
|
if (!cable_state)
|
|
battery_capacity++;
|
|
if (battery_capacity > 10)
|
|
battery_capacity = 10;
|
|
|
|
battery_capacity *= 10;
|
|
|
|
spin_lock_irqsave(&sc->lock, flags);
|
|
sc->cable_state = cable_state;
|
|
sc->battery_capacity = battery_capacity;
|
|
sc->battery_charging = battery_charging;
|
|
spin_unlock_irqrestore(&sc->lock, flags);
|
|
|
|
offset += 5;
|
|
|
|
/*
|
|
* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
|
|
* and 37 on Bluetooth.
|
|
* The first 7 bits of the first byte is a counter and bit 8 is a touch
|
|
* indicator that is 0 when pressed and 1 when not pressed.
|
|
* The next 3 bytes are two 12 bit touch coordinates, X and Y.
|
|
* The data for the second touch is in the same format and immediatly
|
|
* follows the data for the first.
|
|
*/
|
|
for (n = 0; n < 2; n++) {
|
|
__u16 x, y;
|
|
|
|
x = rd[offset+1] | ((rd[offset+2] & 0xF) << 8);
|
|
y = ((rd[offset+2] & 0xF0) >> 4) | (rd[offset+3] << 4);
|
|
|
|
input_mt_slot(input_dev, n);
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
|
|
!(rd[offset] >> 7));
|
|
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
|
|
|
|
offset += 4;
|
|
}
|
|
}
|
|
|
|
static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
|
|
__u8 *rd, int size)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
/*
|
|
* Sixaxis HID report has acclerometers/gyro with MSByte first, this
|
|
* has to be BYTE_SWAPPED before passing up to joystick interface
|
|
*/
|
|
if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) {
|
|
swap(rd[41], rd[42]);
|
|
swap(rd[43], rd[44]);
|
|
swap(rd[45], rd[46]);
|
|
swap(rd[47], rd[48]);
|
|
|
|
sixaxis_parse_report(sc, rd, size);
|
|
} else if (((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 &&
|
|
size == 64) || ((sc->quirks & DUALSHOCK4_CONTROLLER_BT)
|
|
&& rd[0] == 0x11 && size == 78)) {
|
|
dualshock4_parse_report(sc, rd, size);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
|
|
struct hid_field *field, struct hid_usage *usage,
|
|
unsigned long **bit, int *max)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
if (sc->quirks & BUZZ_CONTROLLER) {
|
|
unsigned int key = usage->hid & HID_USAGE;
|
|
|
|
if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
|
|
return -1;
|
|
|
|
switch (usage->collection_index) {
|
|
case 1:
|
|
if (key >= ARRAY_SIZE(buzz_keymap))
|
|
return -1;
|
|
|
|
key = buzz_keymap[key];
|
|
if (!key)
|
|
return -1;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
|
|
return 1;
|
|
}
|
|
|
|
if (sc->quirks & PS3REMOTE)
|
|
return ps3remote_mapping(hdev, hi, field, usage, bit, max);
|
|
|
|
/* Let hid-core decide for the others */
|
|
return 0;
|
|
}
|
|
|
|
static int sony_register_touchpad(struct hid_input *hi, int touch_count,
|
|
int w, int h)
|
|
{
|
|
struct input_dev *input_dev = hi->input;
|
|
int ret;
|
|
|
|
ret = input_mt_init_slots(input_dev, touch_count, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, w, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, h, 0, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sony_input_configured(struct hid_device *hdev,
|
|
struct hid_input *hidinput)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
/*
|
|
* The Dualshock 4 touchpad supports 2 touches and has a
|
|
* resolution of 1920x942 (44.86 dots/mm).
|
|
*/
|
|
if (sc->quirks & DUALSHOCK4_CONTROLLER) {
|
|
if (sony_register_touchpad(hidinput, 2, 1920, 942) != 0)
|
|
hid_err(sc->hdev,
|
|
"Unable to initialize multi-touch slots\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
|
|
* to "operational". Without this, the ps3 controller will not report any
|
|
* events.
|
|
*/
|
|
static int sixaxis_set_operational_usb(struct hid_device *hdev)
|
|
{
|
|
int ret;
|
|
char *buf = kmalloc(18, GFP_KERNEL);
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
ret = hid_hw_raw_request(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT,
|
|
HID_REQ_GET_REPORT);
|
|
|
|
if (ret < 0)
|
|
hid_err(hdev, "can't set operational mode\n");
|
|
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sixaxis_set_operational_bt(struct hid_device *hdev)
|
|
{
|
|
unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
|
|
return hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
|
|
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
|
|
}
|
|
|
|
/*
|
|
* Requesting feature report 0x02 in Bluetooth mode changes the state of the
|
|
* controller so that it sends full input reports of type 0x11.
|
|
*/
|
|
static int dualshock4_set_operational_bt(struct hid_device *hdev)
|
|
{
|
|
__u8 buf[37] = { 0 };
|
|
|
|
return hid_hw_raw_request(hdev, 0x02, buf, sizeof(buf),
|
|
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
|
|
}
|
|
|
|
static void sixaxis_set_leds_from_id(int id, __u8 values[MAX_LEDS])
|
|
{
|
|
static const __u8 sixaxis_leds[10][4] = {
|
|
{ 0x01, 0x00, 0x00, 0x00 },
|
|
{ 0x00, 0x01, 0x00, 0x00 },
|
|
{ 0x00, 0x00, 0x01, 0x00 },
|
|
{ 0x00, 0x00, 0x00, 0x01 },
|
|
{ 0x01, 0x00, 0x00, 0x01 },
|
|
{ 0x00, 0x01, 0x00, 0x01 },
|
|
{ 0x00, 0x00, 0x01, 0x01 },
|
|
{ 0x01, 0x00, 0x01, 0x01 },
|
|
{ 0x00, 0x01, 0x01, 0x01 },
|
|
{ 0x01, 0x01, 0x01, 0x01 }
|
|
};
|
|
|
|
BUG_ON(MAX_LEDS < ARRAY_SIZE(sixaxis_leds[0]));
|
|
|
|
if (id < 0)
|
|
return;
|
|
|
|
id %= 10;
|
|
memcpy(values, sixaxis_leds[id], sizeof(sixaxis_leds[id]));
|
|
}
|
|
|
|
static void dualshock4_set_leds_from_id(int id, __u8 values[MAX_LEDS])
|
|
{
|
|
/* The first 4 color/index entries match what the PS4 assigns */
|
|
static const __u8 color_code[7][3] = {
|
|
/* Blue */ { 0x00, 0x00, 0x01 },
|
|
/* Red */ { 0x01, 0x00, 0x00 },
|
|
/* Green */ { 0x00, 0x01, 0x00 },
|
|
/* Pink */ { 0x02, 0x00, 0x01 },
|
|
/* Orange */ { 0x02, 0x01, 0x00 },
|
|
/* Teal */ { 0x00, 0x01, 0x01 },
|
|
/* White */ { 0x01, 0x01, 0x01 }
|
|
};
|
|
|
|
BUG_ON(MAX_LEDS < ARRAY_SIZE(color_code[0]));
|
|
|
|
if (id < 0)
|
|
return;
|
|
|
|
id %= 7;
|
|
memcpy(values, color_code[id], sizeof(color_code[id]));
|
|
}
|
|
|
|
static void buzz_set_leds(struct hid_device *hdev, const __u8 *leds)
|
|
{
|
|
struct list_head *report_list =
|
|
&hdev->report_enum[HID_OUTPUT_REPORT].report_list;
|
|
struct hid_report *report = list_entry(report_list->next,
|
|
struct hid_report, list);
|
|
__s32 *value = report->field[0]->value;
|
|
|
|
value[0] = 0x00;
|
|
value[1] = leds[0] ? 0xff : 0x00;
|
|
value[2] = leds[1] ? 0xff : 0x00;
|
|
value[3] = leds[2] ? 0xff : 0x00;
|
|
value[4] = leds[3] ? 0xff : 0x00;
|
|
value[5] = 0x00;
|
|
value[6] = 0x00;
|
|
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
|
|
}
|
|
|
|
static void sony_set_leds(struct sony_sc *sc, const __u8 *leds, int count)
|
|
{
|
|
int n;
|
|
|
|
BUG_ON(count > MAX_LEDS);
|
|
|
|
if (sc->quirks & BUZZ_CONTROLLER && count == 4) {
|
|
buzz_set_leds(sc->hdev, leds);
|
|
} else {
|
|
for (n = 0; n < count; n++)
|
|
sc->led_state[n] = leds[n];
|
|
schedule_work(&sc->state_worker);
|
|
}
|
|
}
|
|
|
|
static void sony_led_set_brightness(struct led_classdev *led,
|
|
enum led_brightness value)
|
|
{
|
|
struct device *dev = led->dev->parent;
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct sony_sc *drv_data;
|
|
|
|
int n;
|
|
int force_update;
|
|
|
|
drv_data = hid_get_drvdata(hdev);
|
|
if (!drv_data) {
|
|
hid_err(hdev, "No device data\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The Sixaxis on USB will override any LED settings sent to it
|
|
* and keep flashing all of the LEDs until the PS button is pressed.
|
|
* Updates, even if redundant, must be always be sent to the
|
|
* controller to avoid having to toggle the state of an LED just to
|
|
* stop the flashing later on.
|
|
*/
|
|
force_update = !!(drv_data->quirks & SIXAXIS_CONTROLLER_USB);
|
|
|
|
for (n = 0; n < drv_data->led_count; n++) {
|
|
if (led == drv_data->leds[n] && (force_update ||
|
|
(value != drv_data->led_state[n] ||
|
|
drv_data->led_delay_on[n] ||
|
|
drv_data->led_delay_off[n]))) {
|
|
|
|
drv_data->led_state[n] = value;
|
|
|
|
/* Setting the brightness stops the blinking */
|
|
drv_data->led_delay_on[n] = 0;
|
|
drv_data->led_delay_off[n] = 0;
|
|
|
|
sony_set_leds(drv_data, drv_data->led_state,
|
|
drv_data->led_count);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static enum led_brightness sony_led_get_brightness(struct led_classdev *led)
|
|
{
|
|
struct device *dev = led->dev->parent;
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct sony_sc *drv_data;
|
|
|
|
int n;
|
|
|
|
drv_data = hid_get_drvdata(hdev);
|
|
if (!drv_data) {
|
|
hid_err(hdev, "No device data\n");
|
|
return LED_OFF;
|
|
}
|
|
|
|
for (n = 0; n < drv_data->led_count; n++) {
|
|
if (led == drv_data->leds[n])
|
|
return drv_data->led_state[n];
|
|
}
|
|
|
|
return LED_OFF;
|
|
}
|
|
|
|
static int sony_led_blink_set(struct led_classdev *led, unsigned long *delay_on,
|
|
unsigned long *delay_off)
|
|
{
|
|
struct device *dev = led->dev->parent;
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct sony_sc *drv_data = hid_get_drvdata(hdev);
|
|
int n;
|
|
__u8 new_on, new_off;
|
|
|
|
if (!drv_data) {
|
|
hid_err(hdev, "No device data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Max delay is 255 deciseconds or 2550 milliseconds */
|
|
if (*delay_on > 2550)
|
|
*delay_on = 2550;
|
|
if (*delay_off > 2550)
|
|
*delay_off = 2550;
|
|
|
|
/* Blink at 1 Hz if both values are zero */
|
|
if (!*delay_on && !*delay_off)
|
|
*delay_on = *delay_off = 500;
|
|
|
|
new_on = *delay_on / 10;
|
|
new_off = *delay_off / 10;
|
|
|
|
for (n = 0; n < drv_data->led_count; n++) {
|
|
if (led == drv_data->leds[n])
|
|
break;
|
|
}
|
|
|
|
/* This LED is not registered on this device */
|
|
if (n >= drv_data->led_count)
|
|
return -EINVAL;
|
|
|
|
/* Don't schedule work if the values didn't change */
|
|
if (new_on != drv_data->led_delay_on[n] ||
|
|
new_off != drv_data->led_delay_off[n]) {
|
|
drv_data->led_delay_on[n] = new_on;
|
|
drv_data->led_delay_off[n] = new_off;
|
|
schedule_work(&drv_data->state_worker);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sony_leds_remove(struct sony_sc *sc)
|
|
{
|
|
struct led_classdev *led;
|
|
int n;
|
|
|
|
BUG_ON(!(sc->quirks & SONY_LED_SUPPORT));
|
|
|
|
for (n = 0; n < sc->led_count; n++) {
|
|
led = sc->leds[n];
|
|
sc->leds[n] = NULL;
|
|
if (!led)
|
|
continue;
|
|
led_classdev_unregister(led);
|
|
kfree(led);
|
|
}
|
|
|
|
sc->led_count = 0;
|
|
}
|
|
|
|
static int sony_leds_init(struct sony_sc *sc)
|
|
{
|
|
struct hid_device *hdev = sc->hdev;
|
|
int n, ret = 0;
|
|
int use_ds4_names;
|
|
struct led_classdev *led;
|
|
size_t name_sz;
|
|
char *name;
|
|
size_t name_len;
|
|
const char *name_fmt;
|
|
static const char * const ds4_name_str[] = { "red", "green", "blue",
|
|
"global" };
|
|
__u8 initial_values[MAX_LEDS] = { 0 };
|
|
__u8 max_brightness[MAX_LEDS] = { [0 ... (MAX_LEDS - 1)] = 1 };
|
|
__u8 use_hw_blink[MAX_LEDS] = { 0 };
|
|
|
|
BUG_ON(!(sc->quirks & SONY_LED_SUPPORT));
|
|
|
|
if (sc->quirks & BUZZ_CONTROLLER) {
|
|
sc->led_count = 4;
|
|
use_ds4_names = 0;
|
|
name_len = strlen("::buzz#");
|
|
name_fmt = "%s::buzz%d";
|
|
/* Validate expected report characteristics. */
|
|
if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7))
|
|
return -ENODEV;
|
|
} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
|
|
dualshock4_set_leds_from_id(sc->device_id, initial_values);
|
|
initial_values[3] = 1;
|
|
sc->led_count = 4;
|
|
memset(max_brightness, 255, 3);
|
|
use_hw_blink[3] = 1;
|
|
use_ds4_names = 1;
|
|
name_len = 0;
|
|
name_fmt = "%s:%s";
|
|
} else {
|
|
sixaxis_set_leds_from_id(sc->device_id, initial_values);
|
|
sc->led_count = 4;
|
|
memset(use_hw_blink, 1, 4);
|
|
use_ds4_names = 0;
|
|
name_len = strlen("::sony#");
|
|
name_fmt = "%s::sony%d";
|
|
}
|
|
|
|
/*
|
|
* Clear LEDs as we have no way of reading their initial state. This is
|
|
* only relevant if the driver is loaded after somebody actively set the
|
|
* LEDs to on
|
|
*/
|
|
sony_set_leds(sc, initial_values, sc->led_count);
|
|
|
|
name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
|
|
|
|
for (n = 0; n < sc->led_count; n++) {
|
|
|
|
if (use_ds4_names)
|
|
name_sz = strlen(dev_name(&hdev->dev)) + strlen(ds4_name_str[n]) + 2;
|
|
|
|
led = kzalloc(sizeof(struct led_classdev) + name_sz, GFP_KERNEL);
|
|
if (!led) {
|
|
hid_err(hdev, "Couldn't allocate memory for LED %d\n", n);
|
|
ret = -ENOMEM;
|
|
goto error_leds;
|
|
}
|
|
|
|
name = (void *)(&led[1]);
|
|
if (use_ds4_names)
|
|
snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev),
|
|
ds4_name_str[n]);
|
|
else
|
|
snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), n + 1);
|
|
led->name = name;
|
|
led->brightness = initial_values[n];
|
|
led->max_brightness = max_brightness[n];
|
|
led->brightness_get = sony_led_get_brightness;
|
|
led->brightness_set = sony_led_set_brightness;
|
|
|
|
if (use_hw_blink[n])
|
|
led->blink_set = sony_led_blink_set;
|
|
|
|
sc->leds[n] = led;
|
|
|
|
ret = led_classdev_register(&hdev->dev, led);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to register LED %d\n", n);
|
|
sc->leds[n] = NULL;
|
|
kfree(led);
|
|
goto error_leds;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
|
|
error_leds:
|
|
sony_leds_remove(sc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sixaxis_state_worker(struct work_struct *work)
|
|
{
|
|
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
|
|
int n;
|
|
union sixaxis_output_report_01 report = {
|
|
.buf = {
|
|
0x01,
|
|
0x00, 0xff, 0x00, 0xff, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0x00, 0x00, 0x00, 0x00, 0x00
|
|
}
|
|
};
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
report.data.rumble.right_motor_on = sc->right ? 1 : 0;
|
|
report.data.rumble.left_motor_force = sc->left;
|
|
#endif
|
|
|
|
report.data.leds_bitmap |= sc->led_state[0] << 1;
|
|
report.data.leds_bitmap |= sc->led_state[1] << 2;
|
|
report.data.leds_bitmap |= sc->led_state[2] << 3;
|
|
report.data.leds_bitmap |= sc->led_state[3] << 4;
|
|
|
|
/* Set flag for all leds off, required for 3rd party INTEC controller */
|
|
if ((report.data.leds_bitmap & 0x1E) == 0)
|
|
report.data.leds_bitmap |= 0x20;
|
|
|
|
/*
|
|
* The LEDs in the report are indexed in reverse order to their
|
|
* corresponding light on the controller.
|
|
* Index 0 = LED 4, index 1 = LED 3, etc...
|
|
*
|
|
* In the case of both delay values being zero (blinking disabled) the
|
|
* default report values should be used or the controller LED will be
|
|
* always off.
|
|
*/
|
|
for (n = 0; n < 4; n++) {
|
|
if (sc->led_delay_on[n] || sc->led_delay_off[n]) {
|
|
report.data.led[3 - n].duty_off = sc->led_delay_off[n];
|
|
report.data.led[3 - n].duty_on = sc->led_delay_on[n];
|
|
}
|
|
}
|
|
|
|
hid_hw_raw_request(sc->hdev, report.data.report_id, report.buf,
|
|
sizeof(report), HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
|
|
}
|
|
|
|
static void dualshock4_state_worker(struct work_struct *work)
|
|
{
|
|
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
|
|
struct hid_device *hdev = sc->hdev;
|
|
int offset;
|
|
|
|
__u8 buf[78] = { 0 };
|
|
|
|
if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
|
|
buf[0] = 0x05;
|
|
buf[1] = 0xFF;
|
|
offset = 4;
|
|
} else {
|
|
buf[0] = 0x11;
|
|
buf[1] = 0xB0;
|
|
buf[3] = 0x0F;
|
|
offset = 6;
|
|
}
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
buf[offset++] = sc->right;
|
|
buf[offset++] = sc->left;
|
|
#else
|
|
offset += 2;
|
|
#endif
|
|
|
|
/* LED 3 is the global control */
|
|
if (sc->led_state[3]) {
|
|
buf[offset++] = sc->led_state[0];
|
|
buf[offset++] = sc->led_state[1];
|
|
buf[offset++] = sc->led_state[2];
|
|
} else {
|
|
offset += 3;
|
|
}
|
|
|
|
/* If both delay values are zero the DualShock 4 disables blinking. */
|
|
buf[offset++] = sc->led_delay_on[3];
|
|
buf[offset++] = sc->led_delay_off[3];
|
|
|
|
if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
|
|
hid_hw_output_report(hdev, buf, 32);
|
|
else
|
|
hid_hw_raw_request(hdev, 0x11, buf, 78,
|
|
HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
|
|
}
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
static int sony_play_effect(struct input_dev *dev, void *data,
|
|
struct ff_effect *effect)
|
|
{
|
|
struct hid_device *hid = input_get_drvdata(dev);
|
|
struct sony_sc *sc = hid_get_drvdata(hid);
|
|
|
|
if (effect->type != FF_RUMBLE)
|
|
return 0;
|
|
|
|
sc->left = effect->u.rumble.strong_magnitude / 256;
|
|
sc->right = effect->u.rumble.weak_magnitude / 256;
|
|
|
|
schedule_work(&sc->state_worker);
|
|
return 0;
|
|
}
|
|
|
|
static int sony_init_ff(struct sony_sc *sc)
|
|
{
|
|
struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
|
|
struct hid_input, list);
|
|
struct input_dev *input_dev = hidinput->input;
|
|
|
|
input_set_capability(input_dev, EV_FF, FF_RUMBLE);
|
|
return input_ff_create_memless(input_dev, NULL, sony_play_effect);
|
|
}
|
|
|
|
#else
|
|
static int sony_init_ff(struct sony_sc *sc)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int sony_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct sony_sc *sc = container_of(psy, struct sony_sc, battery);
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
u8 battery_charging, battery_capacity, cable_state;
|
|
|
|
spin_lock_irqsave(&sc->lock, flags);
|
|
battery_charging = sc->battery_charging;
|
|
battery_capacity = sc->battery_capacity;
|
|
cable_state = sc->cable_state;
|
|
spin_unlock_irqrestore(&sc->lock, flags);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = 1;
|
|
break;
|
|
case POWER_SUPPLY_PROP_SCOPE:
|
|
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
val->intval = battery_capacity;
|
|
break;
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
if (battery_charging)
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else
|
|
if (battery_capacity == 100 && cable_state)
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int sony_battery_probe(struct sony_sc *sc)
|
|
{
|
|
struct hid_device *hdev = sc->hdev;
|
|
int ret;
|
|
|
|
/*
|
|
* Set the default battery level to 100% to avoid low battery warnings
|
|
* if the battery is polled before the first device report is received.
|
|
*/
|
|
sc->battery_capacity = 100;
|
|
|
|
sc->battery.properties = sony_battery_props;
|
|
sc->battery.num_properties = ARRAY_SIZE(sony_battery_props);
|
|
sc->battery.get_property = sony_battery_get_property;
|
|
sc->battery.type = POWER_SUPPLY_TYPE_BATTERY;
|
|
sc->battery.use_for_apm = 0;
|
|
sc->battery.name = kasprintf(GFP_KERNEL, "sony_controller_battery_%pMR",
|
|
sc->mac_address);
|
|
if (!sc->battery.name)
|
|
return -ENOMEM;
|
|
|
|
ret = power_supply_register(&hdev->dev, &sc->battery);
|
|
if (ret) {
|
|
hid_err(hdev, "Unable to register battery device\n");
|
|
goto err_free;
|
|
}
|
|
|
|
power_supply_powers(&sc->battery, &hdev->dev);
|
|
return 0;
|
|
|
|
err_free:
|
|
kfree(sc->battery.name);
|
|
sc->battery.name = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static void sony_battery_remove(struct sony_sc *sc)
|
|
{
|
|
if (!sc->battery.name)
|
|
return;
|
|
|
|
power_supply_unregister(&sc->battery);
|
|
kfree(sc->battery.name);
|
|
sc->battery.name = NULL;
|
|
}
|
|
|
|
/*
|
|
* If a controller is plugged in via USB while already connected via Bluetooth
|
|
* it will show up as two devices. A global list of connected controllers and
|
|
* their MAC addresses is maintained to ensure that a device is only connected
|
|
* once.
|
|
*/
|
|
static int sony_check_add_dev_list(struct sony_sc *sc)
|
|
{
|
|
struct sony_sc *entry;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&sony_dev_list_lock, flags);
|
|
|
|
list_for_each_entry(entry, &sony_device_list, list_node) {
|
|
ret = memcmp(sc->mac_address, entry->mac_address,
|
|
sizeof(sc->mac_address));
|
|
if (!ret) {
|
|
ret = -EEXIST;
|
|
hid_info(sc->hdev, "controller with MAC address %pMR already connected\n",
|
|
sc->mac_address);
|
|
goto unlock;
|
|
}
|
|
}
|
|
|
|
ret = 0;
|
|
list_add(&(sc->list_node), &sony_device_list);
|
|
|
|
unlock:
|
|
spin_unlock_irqrestore(&sony_dev_list_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static void sony_remove_dev_list(struct sony_sc *sc)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (sc->list_node.next) {
|
|
spin_lock_irqsave(&sony_dev_list_lock, flags);
|
|
list_del(&(sc->list_node));
|
|
spin_unlock_irqrestore(&sony_dev_list_lock, flags);
|
|
}
|
|
}
|
|
|
|
static int sony_get_bt_devaddr(struct sony_sc *sc)
|
|
{
|
|
int ret;
|
|
|
|
/* HIDP stores the device MAC address as a string in the uniq field. */
|
|
ret = strlen(sc->hdev->uniq);
|
|
if (ret != 17)
|
|
return -EINVAL;
|
|
|
|
ret = sscanf(sc->hdev->uniq,
|
|
"%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
|
|
&sc->mac_address[5], &sc->mac_address[4], &sc->mac_address[3],
|
|
&sc->mac_address[2], &sc->mac_address[1], &sc->mac_address[0]);
|
|
|
|
if (ret != 6)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sony_check_add(struct sony_sc *sc)
|
|
{
|
|
int n, ret;
|
|
|
|
if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) ||
|
|
(sc->quirks & SIXAXIS_CONTROLLER_BT)) {
|
|
/*
|
|
* sony_get_bt_devaddr() attempts to parse the Bluetooth MAC
|
|
* address from the uniq string where HIDP stores it.
|
|
* As uniq cannot be guaranteed to be a MAC address in all cases
|
|
* a failure of this function should not prevent the connection.
|
|
*/
|
|
if (sony_get_bt_devaddr(sc) < 0) {
|
|
hid_warn(sc->hdev, "UNIQ does not contain a MAC address; duplicate check skipped\n");
|
|
return 0;
|
|
}
|
|
} else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
|
|
__u8 buf[7];
|
|
|
|
/*
|
|
* The MAC address of a DS4 controller connected via USB can be
|
|
* retrieved with feature report 0x81. The address begins at
|
|
* offset 1.
|
|
*/
|
|
ret = hid_hw_raw_request(sc->hdev, 0x81, buf, sizeof(buf),
|
|
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
|
|
|
|
if (ret != 7) {
|
|
hid_err(sc->hdev, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n");
|
|
return ret < 0 ? ret : -EINVAL;
|
|
}
|
|
|
|
memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address));
|
|
} else if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
|
|
__u8 buf[18];
|
|
|
|
/*
|
|
* The MAC address of a Sixaxis controller connected via USB can
|
|
* be retrieved with feature report 0xf2. The address begins at
|
|
* offset 4.
|
|
*/
|
|
ret = hid_hw_raw_request(sc->hdev, 0xf2, buf, sizeof(buf),
|
|
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
|
|
|
|
if (ret != 18) {
|
|
hid_err(sc->hdev, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n");
|
|
return ret < 0 ? ret : -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* The Sixaxis device MAC in the report is big-endian and must
|
|
* be byte-swapped.
|
|
*/
|
|
for (n = 0; n < 6; n++)
|
|
sc->mac_address[5-n] = buf[4+n];
|
|
} else {
|
|
return 0;
|
|
}
|
|
|
|
return sony_check_add_dev_list(sc);
|
|
}
|
|
|
|
static int sony_set_device_id(struct sony_sc *sc)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Only DualShock 4 or Sixaxis controllers get an id.
|
|
* All others are set to -1.
|
|
*/
|
|
if ((sc->quirks & SIXAXIS_CONTROLLER) ||
|
|
(sc->quirks & DUALSHOCK4_CONTROLLER)) {
|
|
ret = ida_simple_get(&sony_device_id_allocator, 0, 0,
|
|
GFP_KERNEL);
|
|
if (ret < 0) {
|
|
sc->device_id = -1;
|
|
return ret;
|
|
}
|
|
sc->device_id = ret;
|
|
} else {
|
|
sc->device_id = -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sony_release_device_id(struct sony_sc *sc)
|
|
{
|
|
if (sc->device_id >= 0) {
|
|
ida_simple_remove(&sony_device_id_allocator, sc->device_id);
|
|
sc->device_id = -1;
|
|
}
|
|
}
|
|
|
|
static inline void sony_init_work(struct sony_sc *sc,
|
|
void (*worker)(struct work_struct *))
|
|
{
|
|
if (!sc->worker_initialized)
|
|
INIT_WORK(&sc->state_worker, worker);
|
|
|
|
sc->worker_initialized = 1;
|
|
}
|
|
|
|
static inline void sony_cancel_work_sync(struct sony_sc *sc)
|
|
{
|
|
if (sc->worker_initialized)
|
|
cancel_work_sync(&sc->state_worker);
|
|
}
|
|
|
|
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|
{
|
|
int ret;
|
|
unsigned long quirks = id->driver_data;
|
|
struct sony_sc *sc;
|
|
unsigned int connect_mask = HID_CONNECT_DEFAULT;
|
|
|
|
sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL);
|
|
if (sc == NULL) {
|
|
hid_err(hdev, "can't alloc sony descriptor\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
sc->quirks = quirks;
|
|
hid_set_drvdata(hdev, sc);
|
|
sc->hdev = hdev;
|
|
|
|
ret = hid_parse(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "parse failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (sc->quirks & VAIO_RDESC_CONSTANT)
|
|
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
|
|
else if (sc->quirks & SIXAXIS_CONTROLLER)
|
|
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
|
|
|
|
ret = hid_hw_start(hdev, connect_mask);
|
|
if (ret) {
|
|
hid_err(hdev, "hw start failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = sony_set_device_id(sc);
|
|
if (ret < 0) {
|
|
hid_err(hdev, "failed to allocate the device id\n");
|
|
goto err_stop;
|
|
}
|
|
|
|
if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
|
|
/*
|
|
* The Sony Sixaxis does not handle HID Output Reports on the
|
|
* Interrupt EP like it could, so we need to force HID Output
|
|
* Reports to use HID_REQ_SET_REPORT on the Control EP.
|
|
*
|
|
* There is also another issue about HID Output Reports via USB,
|
|
* the Sixaxis does not want the report_id as part of the data
|
|
* packet, so we have to discard buf[0] when sending the actual
|
|
* control message, even for numbered reports, humpf!
|
|
*/
|
|
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
|
|
hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
|
|
ret = sixaxis_set_operational_usb(hdev);
|
|
sony_init_work(sc, sixaxis_state_worker);
|
|
} else if (sc->quirks & SIXAXIS_CONTROLLER_BT) {
|
|
/*
|
|
* The Sixaxis wants output reports sent on the ctrl endpoint
|
|
* when connected via Bluetooth.
|
|
*/
|
|
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
|
|
ret = sixaxis_set_operational_bt(hdev);
|
|
sony_init_work(sc, sixaxis_state_worker);
|
|
} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
|
|
if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
|
|
/*
|
|
* The DualShock 4 wants output reports sent on the ctrl
|
|
* endpoint when connected via Bluetooth.
|
|
*/
|
|
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
|
|
ret = dualshock4_set_operational_bt(hdev);
|
|
if (ret < 0) {
|
|
hid_err(hdev, "failed to set the Dualshock 4 operational mode\n");
|
|
goto err_stop;
|
|
}
|
|
}
|
|
|
|
sony_init_work(sc, dualshock4_state_worker);
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
|
|
if (ret < 0)
|
|
goto err_stop;
|
|
|
|
ret = sony_check_add(sc);
|
|
if (ret < 0)
|
|
goto err_stop;
|
|
|
|
if (sc->quirks & SONY_LED_SUPPORT) {
|
|
ret = sony_leds_init(sc);
|
|
if (ret < 0)
|
|
goto err_stop;
|
|
}
|
|
|
|
if (sc->quirks & SONY_BATTERY_SUPPORT) {
|
|
ret = sony_battery_probe(sc);
|
|
if (ret < 0)
|
|
goto err_stop;
|
|
|
|
/* Open the device to receive reports with battery info */
|
|
ret = hid_hw_open(hdev);
|
|
if (ret < 0) {
|
|
hid_err(hdev, "hw open failed\n");
|
|
goto err_stop;
|
|
}
|
|
}
|
|
|
|
if (sc->quirks & SONY_FF_SUPPORT) {
|
|
ret = sony_init_ff(sc);
|
|
if (ret < 0)
|
|
goto err_close;
|
|
}
|
|
|
|
return 0;
|
|
err_close:
|
|
hid_hw_close(hdev);
|
|
err_stop:
|
|
if (sc->quirks & SONY_LED_SUPPORT)
|
|
sony_leds_remove(sc);
|
|
if (sc->quirks & SONY_BATTERY_SUPPORT)
|
|
sony_battery_remove(sc);
|
|
sony_cancel_work_sync(sc);
|
|
sony_remove_dev_list(sc);
|
|
sony_release_device_id(sc);
|
|
hid_hw_stop(hdev);
|
|
return ret;
|
|
}
|
|
|
|
static void sony_remove(struct hid_device *hdev)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
if (sc->quirks & SONY_LED_SUPPORT)
|
|
sony_leds_remove(sc);
|
|
|
|
if (sc->quirks & SONY_BATTERY_SUPPORT) {
|
|
hid_hw_close(hdev);
|
|
sony_battery_remove(sc);
|
|
}
|
|
|
|
sony_cancel_work_sync(sc);
|
|
|
|
sony_remove_dev_list(sc);
|
|
|
|
sony_release_device_id(sc);
|
|
|
|
hid_hw_stop(hdev);
|
|
}
|
|
|
|
static const struct hid_device_id sony_devices[] = {
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
|
|
.driver_data = SIXAXIS_CONTROLLER_USB },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER),
|
|
.driver_data = SIXAXIS_CONTROLLER_USB },
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
|
|
.driver_data = SIXAXIS_CONTROLLER_BT },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
|
|
.driver_data = VAIO_RDESC_CONSTANT },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE),
|
|
.driver_data = VAIO_RDESC_CONSTANT },
|
|
/* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as
|
|
* Logitech joystick from the device descriptor. */
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER),
|
|
.driver_data = BUZZ_CONTROLLER },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER),
|
|
.driver_data = BUZZ_CONTROLLER },
|
|
/* PS3 BD Remote Control */
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE),
|
|
.driver_data = PS3REMOTE },
|
|
/* Logitech Harmony Adapter for PS3 */
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3),
|
|
.driver_data = PS3REMOTE },
|
|
/* Sony Dualshock 4 controllers for PS4 */
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
|
|
.driver_data = DUALSHOCK4_CONTROLLER_USB },
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
|
|
.driver_data = DUALSHOCK4_CONTROLLER_BT },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(hid, sony_devices);
|
|
|
|
static struct hid_driver sony_driver = {
|
|
.name = "sony",
|
|
.id_table = sony_devices,
|
|
.input_mapping = sony_mapping,
|
|
.input_configured = sony_input_configured,
|
|
.probe = sony_probe,
|
|
.remove = sony_remove,
|
|
.report_fixup = sony_report_fixup,
|
|
.raw_event = sony_raw_event
|
|
};
|
|
|
|
static int __init sony_init(void)
|
|
{
|
|
dbg_hid("Sony:%s\n", __func__);
|
|
|
|
return hid_register_driver(&sony_driver);
|
|
}
|
|
|
|
static void __exit sony_exit(void)
|
|
{
|
|
dbg_hid("Sony:%s\n", __func__);
|
|
|
|
ida_destroy(&sony_device_id_allocator);
|
|
hid_unregister_driver(&sony_driver);
|
|
}
|
|
module_init(sony_init);
|
|
module_exit(sony_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|