0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-24 03:24:55 +08:00
linux/arch/powerpc/boot/cuboot-mpc7448hpc2.c
Grant Likely 2543133381 [POWERPC] bootwrapper: Build multiple cuImages
Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image
with a fdt blob which means for any given configuration only one dts
file can be selected and so support for only one board can be built

This moves the selection of the default .dts file out of the kernel
config and into the bootwrapper makefile.  The makefile chooses which
images to build based on the kernel config and the dts source file
name is taken directly from the image name.  For example "cuImage.ebony"
will use "ebony.dts" as the device tree source file.

In addition, this patch allows a specific image to be requested from the
command line by adding "cuImage.%" and "treeImage.%" targets to the list
of valid built targets in arch/powerpc/Makefile.  This allows the default
dts selection to be overridden.

Another advantage to this change is it allows a single defconfig to be
supplied for all boards using the same chip family and only differing in
the device tree.

Important note: This patch adds two new zImage targets; zImage.dtb.% and
zImage.dtb.initrd.% for zImages with embedded dtb files.  Currently
there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc,
adder875-redboot and ep8248e.  This patch *changes the zImage filenames*
for those platforms.  ie. 'zImage.ps3' is now 'zImage.dtb.ps3'.

This new zImage.dtb targets were added so that the .dts file could be
part of the dependancies list for building them.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 11:40:19 +11:00

49 lines
1.2 KiB
C

/*
* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Roy Zang <tie-fei.zang@freescale.com>
*
* Description:
* Old U-boot compatibility for mpc7448hpc2 board
* Based on the code of Scott Wood <scottwood@freescale.com>
* for 83xx and 85xx.
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include "ops.h"
#include "stdio.h"
#include "cuboot.h"
#define TARGET_HAS_ETH1
#include "ppcboot.h"
static bd_t bd;
extern char _dtb_start[], _dtb_end[];
static void platform_fixups(void)
{
void *tsi;
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
tsi = find_node_by_devtype(NULL, "tsi-bridge");
if (tsi)
setprop(tsi, "bus-frequency", &bd.bi_busfreq,
sizeof(bd.bi_busfreq));
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
CUBOOT_INIT();
fdt_init(_dtb_start);
serial_console_init();
platform_ops.fixups = platform_fixups;
}