linux/drivers/scsi
Akinobu Mita e9926b4376 [SCSI] scsi_debug: invalidate protection info for unmapped region
When UNMAP command is issued with the data integrity support enabled,
the protection info for the unmapped region is remain unchanged.
So READ command for the region later on causes data integrity failure.

This fixes it by invalidating protection info for the unmapped region
by filling with 0xff pattern.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 09:24:25 +01:00
..
aacraid SCSI misc on 20130702 2013-07-04 12:30:30 -07:00
aic7xxx aic7xxx: switch to ->show_info() 2013-04-09 14:13:26 -04:00
aic7xxx_old scsi: Spelling hsot -> host 2013-05-28 12:02:12 +02:00
aic94xx [SCSI] libsas: implement > 16 byte CDB support 2013-06-04 11:15:59 -07:00
arcmsr workqueue: deprecate flush[_delayed]_work_sync() 2012-08-20 14:51:24 -07:00
arm acornscsi: switch to ->show_info() 2013-04-09 14:13:27 -04:00
be2iscsi drivers: avoid format strings in names passed to alloc_workqueue() 2013-07-03 16:07:41 -07:00
bfa SCSI misc on 20130702 2013-07-04 12:30:30 -07:00
bnx2fc [SCSI] bnx2fc: Bumped version to 1.0.14 2013-05-02 07:32:26 -07:00
bnx2i treewide: Fix typo in printk and comments 2013-04-24 16:43:00 +02:00
csiostor [SCSI] csiostor: Retain default adapter configuration in absence of config file. 2013-06-04 11:16:28 -07:00
cxgbi [SCSI] cxgb4i: add support for T5 adapter 2013-06-26 10:48:24 -07:00
device_handler [SCSI] scsi_dh_alua: Add module parameter to allow failover to non preferred path without STPG 2013-04-11 16:00:31 -07:00
dpt atomic: use <linux/atomic.h> 2011-07-26 16:49:47 -07:00
fcoe This patch fixes a critical bug that was introduced in 3.9 2013-06-26 23:08:22 -07:00
fnic SCSI misc on 20130702 2013-07-04 12:30:30 -07:00
ibmvscsi [SCSI] ibmvfc: Driver version 1.0.11 2013-05-02 11:58:18 -07:00
isci [SCSI] libsas: implement > 16 byte CDB support 2013-06-04 11:15:59 -07:00
libfc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2013-07-04 11:40:58 -07:00
libsas [SCSI] libsas: implement > 16 byte CDB support 2013-06-04 11:15:59 -07:00
lpfc SCSI misc on 20130702 2013-07-04 12:30:30 -07:00
megaraid [SCSI] megaraid_sas: fix memory leak if SGL has zero length entries 2013-07-05 22:42:42 +01:00
mpt2sas [SCSI] mpt2sas: fix for unused variable 'event_data' warning 2013-06-24 12:55:34 -07:00
mpt3sas [SCSI] mpt3sas: Bump driver version to v02.100.00.00 2013-07-09 09:01:47 +01:00
mvsas [SCSI] libsas: implement > 16 byte CDB support 2013-06-04 11:15:59 -07:00
osd block: do not pass disk names as format strings 2013-07-03 16:07:25 -07:00
pcmcia nsp_cs: switch to ->show_info() 2013-04-09 14:13:21 -04:00
pm8001 [SCSI] pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) 2013-07-05 22:42:43 +01:00
qla2xxx [SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() 2013-07-08 17:36:21 +01:00
qla4xxx drivers: avoid format strings in names passed to alloc_workqueue() 2013-07-03 16:07:41 -07:00
sym53c8xx_2 sym53c8xx_2: switch to ->show_info() 2013-04-09 14:13:15 -04:00
ufs [SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call 2013-06-28 13:17:35 -07:00
.gitignore
3w-9xxx.c new helper: file_inode(file) 2013-02-22 23:31:31 -05:00
3w-9xxx.h
3w-sas.c new helper: file_inode(file) 2013-02-22 23:31:31 -05:00
3w-sas.h
3w-xxxx.c [SCSI] 3w-xxxx: Create sense buffer for unsupported commands 2013-06-24 16:32:22 -07:00
3w-xxxx.h
53c700_d.h_shipped
53c700.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
53c700.h
53c700.scr
a100u2w.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
a100u2w.h
a2091.c switch wd33c93 to ->show_info() 2013-04-09 14:13:15 -04:00
a2091.h
a3000.c [SCSI] a3000: use module_platform_driver_probe() 2013-06-24 19:44:18 +02:00
a3000.h
a4000t.c [SCSI] a4000t: use module_platform_driver_probe() 2013-06-24 19:44:18 +02:00
advansys.c advansys: fix buggered formats - unsigned long != u32 on 64bit 2013-04-09 14:13:22 -04:00
aha152x.c aha152x: switch to ->show_info() 2013-04-09 14:13:22 -04:00
aha152x.h
aha1542.c treewide: Put a space between #include and FILE 2012-06-28 11:44:36 +02:00
aha1542.h
aha1740.c aha1740: switch to ->show_info() 2013-04-09 14:13:23 -04:00
aha1740.h
aic7xxx_old.c aix7xxx_old: switch to ->show_info() 2013-04-09 14:13:28 -04:00
atari_NCR5380.c atari_scsi: switch to ->show_info() 2013-04-09 14:13:29 -04:00
atari_scsi.c atari_scsi: switch to ->show_info() 2013-04-09 14:13:29 -04:00
atari_scsi.h atari_scsi: switch to ->show_info() 2013-04-09 14:13:29 -04:00
atp870u.c atp870u: switch to ->show_info() 2013-04-09 14:13:24 -04:00
atp870u.h
BusLogic.c [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
BusLogic.h [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
bvme6000_scsi.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
ch.c scsi: convert to idr_alloc() 2013-02-27 19:10:18 -08:00
constants.c [SCSI] add DID_TARGET_FAILURE and DID_NEXUS_FAILURE to hostbyte_table in constants.c 2012-09-14 11:58:53 +01:00
dc395x.c dc395x: switch to ->show_info() 2013-04-09 14:13:24 -04:00
dc395x.h
dmx3191d.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
dpt_i2o.c dpt_i2o: switch to ->show_info() 2013-04-09 14:13:24 -04:00
dpti.h
dtc.c NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
dtc.h NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
eata_generic.h
eata_pio.c eata_pio: switch to ->show_info() 2013-04-09 14:13:23 -04:00
eata_pio.h
eata.c [SCSI] remove cmd->serial_number litter 2011-05-01 10:22:40 -05:00
esp_scsi.c scsi: Use vsprintf extention %pf with builtin_return_address 2012-04-05 17:09:40 -07:00
esp_scsi.h
fdomain.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
fdomain.h
FlashPoint.c [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
g_NCR5380_mmio.c
g_NCR5380.c NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
g_NCR5380.h
gdth_ioctl.h
gdth_proc.c gdth: switch to ->show_info() 2013-04-09 14:13:16 -04:00
gdth_proc.h gdth: switch to ->show_info() 2013-04-09 14:13:16 -04:00
gdth.c gdth: switch to ->show_info() 2013-04-09 14:13:16 -04:00
gdth.h gdth: switch to ->show_info() 2013-04-09 14:13:16 -04:00
gvp11.c switch wd33c93 to ->show_info() 2013-04-09 14:13:15 -04:00
gvp11.h
hosts.c driver-core: constify data for class_find_device() 2013-02-06 12:18:56 -08:00
hpsa_cmd.h [SCSI] hpsa: dial down lockup detection during firmware flash 2012-05-10 09:19:39 +01:00
hpsa.c [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls 2013-02-24 09:36:58 +00:00
hpsa.h [SCSI] hpsa: dial down lockup detection during firmware flash 2012-05-10 09:19:39 +01:00
hptiop.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
hptiop.h [SCSI] hptiop: Support HighPoint RR4520/RR4522 HBA 2012-11-27 08:59:43 +04:00
imm.c imm: switch to ->show_info() 2013-04-09 14:13:16 -04:00
imm.h
in2000.c in2000: switch to ->show_info() 2013-04-09 14:13:25 -04:00
in2000.h
initio.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
initio.h
ipr.c Merge branch 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2013-07-03 19:49:46 -07:00
ipr.h [SCSI] ipr: Avoid target_destroy accessing memory after it was freed 2013-06-04 11:16:22 -07:00
ips.c ips: fix format bugs exposed by previous commit 2013-04-09 14:13:27 -04:00
ips.h ips: switch to ->show_info() 2013-04-09 14:13:27 -04:00
iscsi_boot_sysfs.c switch ->is_visible() to returning umode_t 2012-01-03 22:54:55 -05:00
iscsi_tcp.c [SCSI] iscsi_tcp: support PF_MEMALLOC/__GFP_MEMALLOC 2013-04-11 16:55:04 -07:00
iscsi_tcp.h
jazz_esp.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
Kconfig [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
lasi700.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
libiscsi_tcp.c treewide: Fix typo in printk 2013-06-18 13:48:45 +02:00
libiscsi.c [SCSI] libiscsi: Added new boot entries in the session sysfs 2013-06-26 18:04:11 -07:00
libsrp.c scsi: Fix up files implicitly depending on module.h inclusion 2011-10-31 19:31:24 -04:00
mac53c94.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
mac53c94.h
mac_esp.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
mac_scsi.c NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
mac_scsi.h NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
Makefile [SCSI] mpt3sas: add new driver supporting 12GB SAS 2012-12-01 10:09:17 +00:00
megaraid.c PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) 2013-06-05 13:49:36 -06:00
megaraid.h megaraid: Don't use create_proc_read_entry() 2013-04-29 15:41:57 -04:00
mesh.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
mesh.h
mvme16x_scsi.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
mvme147.c switch wd33c93 to ->show_info() 2013-04-09 14:13:15 -04:00
mvme147.h
mvumi.c [SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b 2013-04-15 14:30:44 -06:00
mvumi.h [SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b 2013-04-15 14:30:44 -06:00
ncr53c8xx.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
ncr53c8xx.h
NCR53c406a.c
NCR5380.c NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
NCR5380.h NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
NCR_D700.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
NCR_D700.h
NCR_Q720.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
NCR_Q720.h
nsp32_debug.c treewide: fix a few typos in comments 2011-05-10 10:16:21 +02:00
nsp32_io.h
nsp32.c [SCSI] nsp32: use mdelay instead of large udelay constants 2013-06-19 17:53:35 +02:00
nsp32.h
osst_detect.h
osst_options.h
osst.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
osst.h
pas16.c NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
pas16.h NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
pmcraid.c treewide: Fix typo in printk 2013-06-18 13:48:45 +02:00
pmcraid.h scsi: Fix typo in pmcraid.h 2012-02-21 11:40:37 +01:00
ppa.c ppa: switch to ->show_info() 2013-04-09 14:13:17 -04:00
ppa.h
ps3rom.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
qla1280.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
qla1280.h
qlogicfas408.c
qlogicfas408.h
qlogicfas.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
qlogicpti.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
qlogicpti.h
raid_class.c
script_asm.pl
scsi_debug.c [SCSI] scsi_debug: invalidate protection info for unmapped region 2013-07-09 09:24:25 +01:00
scsi_devinfo.c [SCSI] Workaround for disks that report bad optimal transfer length 2013-06-24 13:00:10 -07:00
scsi_error.c SCSI misc on 20130702 2013-07-04 12:30:30 -07:00
scsi_ioctl.c
scsi_lib_dma.c scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required 2011-10-31 19:31:23 -04:00
scsi_lib.c [SCSI] sd: use REQ_PM in sd's runtime suspend operation 2013-05-06 12:48:17 -07:00
scsi_logging.h
scsi_module.c
scsi_netlink.c scsi: replace obsolete NLMSG_* with type safe nlmsg_* 2013-03-28 14:27:24 -04:00
scsi_pm.c PM / Runtime: Rework the "runtime idle" helper routine 2013-06-03 21:49:52 +02:00
scsi_priv.h [SCSI] async: introduce 'async_domain' type 2012-07-20 09:05:54 +01:00
scsi_proc.c fix buffer leak after "scsi: saner replacements for ->proc_info()" 2013-05-31 15:16:51 -04:00
scsi_sas_internal.h
scsi_scan.c [SCSI] Workaround for disks that report bad optimal transfer length 2013-06-24 13:00:10 -07:00
scsi_sysctl.c
scsi_sysfs.c [SCSI] Allow error handling timeout to be specified 2013-06-04 11:16:24 -07:00
scsi_tgt_if.c scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required 2011-10-31 19:31:23 -04:00
scsi_tgt_lib.c [SCSI] esp, scsi_tgt_lib, fcoe: use list_move() instead of list_del()/list_add() combination 2011-05-01 10:20:10 -05:00
scsi_tgt_priv.h
scsi_trace.c [SCSI] scsi_trace: Decode UNMAP bit in WRITE SAME(10) 2011-05-24 12:38:36 -04:00
scsi_transport_api.h
scsi_transport_fc_internal.h
scsi_transport_fc.c drivers: avoid format strings in names passed to alloc_workqueue() 2013-07-03 16:07:41 -07:00
scsi_transport_iscsi.c [SCSI] libiscsi: Added new boot entries in the session sysfs 2013-06-26 18:04:11 -07:00
scsi_transport_sas.c [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas 2012-12-01 10:08:41 +00:00
scsi_transport_spi.c [SCSI] scsi_transport_spi: fix for unbalanced reference counting 2012-05-10 09:06:12 +01:00
scsi_transport_srp_internal.h
scsi_transport_srp.c IB/srp: Allow SRP disconnect through sysfs 2012-11-30 17:40:33 -08:00
scsi_typedefs.h
scsi.c [SCSI] sd: Update WRITE SAME heuristics 2013-06-26 17:56:18 -07:00
scsi.h
scsicam.c fs: move code out of buffer.c 2012-01-03 22:54:07 -05:00
sd_dif.c [SCSI] sd_dif: problem with verify of type 1 protection information (PI) 2013-05-02 15:37:03 -07:00
sd.c SCSI misc on 20130702 2013-07-04 12:30:30 -07:00
sd.h [SCSI] sd: Update WRITE SAME heuristics 2013-06-26 17:56:18 -07:00
ses.c [SCSI] ses: requesting a fault indication 2011-06-29 12:14:25 -05:00
sg.c aio: don't include aio.h in sched.h 2013-05-07 20:16:25 -07:00
sgiwd93.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
sim710.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
sni_53c710.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
sr_ioctl.c scsi: Fix up files implicitly depending on module.h inclusion 2011-10-31 19:31:24 -04:00
sr_vendor.c
sr.c block_device_operations->release() should return void 2013-05-07 02:16:21 -04:00
sr.h [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise 2011-07-21 14:15:58 -07:00
st_options.h
st.c [SCSI] st: Take additional queue ref in st_probe 2013-04-06 11:14:20 +01:00
st.h [SCSI] st: raise device limit 2012-09-14 17:59:29 +01:00
stex.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
storvsc_drv.c [SCSI] storvsc: Increase the value of STORVSC_MAX_IO_REQUESTS 2013-07-08 15:23:15 +01:00
sun3_NCR5380.c sun3_scsi: add ->show_info() 2013-05-04 14:50:16 -04:00
sun3_scsi_vme.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
sun3_scsi.c sun3_scsi: add ->show_info() 2013-05-04 14:50:16 -04:00
sun3_scsi.h sun3_scsi: add ->show_info() 2013-05-04 14:50:16 -04:00
sun3x_esp.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
sun_esp.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
sym53c416.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
sym53c416.h
t128.c NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
t128.h NCR5830: switch to ->show_info() 2013-04-09 14:13:17 -04:00
tmscsim.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
tmscsim.h
u14-34f.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
ultrastor.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
ultrastor.h
virtio_scsi.c virtio-scsi: reset virtqueue affinity when doing cpu hotplug 2013-04-08 23:06:56 +09:30
vmw_pvscsi.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
vmw_pvscsi.h [SCSI] vmw_pvscsi: Try setting host->max_id as suggested by the device. 2012-03-27 08:26:36 +01:00
wd33c93.c switch wd33c93 to ->show_info() 2013-04-09 14:13:15 -04:00
wd33c93.h switch wd33c93 to ->show_info() 2013-04-09 14:13:15 -04:00
wd7000.c wd7000: switch to ->show_info() 2013-04-09 14:13:15 -04:00
zalon.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00
zorro7xx.c Drivers: scsi: remove __dev* attributes. 2013-01-03 15:57:01 -08:00