Go to file
Ingo Molnar e9765680a3 EFI updates for v5.7:
This time, the set of changes for the EFI subsystem is much larger than
 usual. The main reasons are:
 - Get things cleaned up before EFI support for RISC-V arrives, which will
   increase the size of the validation matrix, and therefore the threshold to
   making drastic changes,
 - After years of defunct maintainership, the GRUB project has finally started
   to consider changes from the distros regarding UEFI boot, some of which are
   highly specific to the way x86 does UEFI secure boot and measured boot,
   based on knowledge of both shim internals and the layout of bootparams and
   the x86 setup header. Having this maintenance burden on other architectures
   (which don't need shim in the first place) is hard to justify, so instead,
   we are introducing a generic Linux/UEFI boot protocol.
 
 Summary of changes:
 - Boot time GDT handling changes (Arvind)
 - Simplify handling of EFI properties table on arm64
 - Generic EFI stub cleanups, to improve command line handling, file I/O,
   memory allocation, etc.
 - Introduce a generic initrd loading method based on calling back into
   the firmware, instead of relying on the x86 EFI handover protocol or
   device tree.
 - Introduce a mixed mode boot method that does not rely on the x86 EFI
   handover protocol either, and could potentially be adopted by other
   architectures (if another one ever surfaces where one execution mode
   is a superset of another)
 - Clean up the contents of struct efi, and move out everything that
   doesn't need to be stored there.
 - Incorporate support for UEFI spec v2.8A changes that permit firmware
   implementations to return EFI_UNSUPPORTED from UEFI runtime services at
   OS runtime, and expose a mask of which ones are supported or unsupported
   via a configuration table.
 - Various documentation updates and minor code cleanups (Heinrich)
 - Partial fix for the lack of by-VA cache maintenance in the decompressor
   on 32-bit ARM. Note that these patches were deliberately put at the
   beginning so they can be used as a stable branch that will be shared with
   a PR containing the complete fix, which I will send to the ARM tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
 +n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
 OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
 FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
 ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
 5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
 tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
 =pDE3
 -----END PGP SIGNATURE-----

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI updates for v5.7 from Ard Biesheuvel:

This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:

 - Get things cleaned up before EFI support for RISC-V arrives, which will
   increase the size of the validation matrix, and therefore the threshold to
   making drastic changes,

 - After years of defunct maintainership, the GRUB project has finally started
   to consider changes from the distros regarding UEFI boot, some of which are
   highly specific to the way x86 does UEFI secure boot and measured boot,
   based on knowledge of both shim internals and the layout of bootparams and
   the x86 setup header. Having this maintenance burden on other architectures
   (which don't need shim in the first place) is hard to justify, so instead,
   we are introducing a generic Linux/UEFI boot protocol.

Summary of changes:

 - Boot time GDT handling changes (Arvind)

 - Simplify handling of EFI properties table on arm64

 - Generic EFI stub cleanups, to improve command line handling, file I/O,
   memory allocation, etc.

 - Introduce a generic initrd loading method based on calling back into
   the firmware, instead of relying on the x86 EFI handover protocol or
   device tree.

 - Introduce a mixed mode boot method that does not rely on the x86 EFI
   handover protocol either, and could potentially be adopted by other
   architectures (if another one ever surfaces where one execution mode
   is a superset of another)

 - Clean up the contents of struct efi, and move out everything that
   doesn't need to be stored there.

 - Incorporate support for UEFI spec v2.8A changes that permit firmware
   implementations to return EFI_UNSUPPORTED from UEFI runtime services at
   OS runtime, and expose a mask of which ones are supported or unsupported
   via a configuration table.

 - Various documentation updates and minor code cleanups (Heinrich)

 - Partial fix for the lack of by-VA cache maintenance in the decompressor
   on 32-bit ARM. Note that these patches were deliberately put at the
   beginning so they can be used as a stable branch that will be shared with
   a PR containing the complete fix, which I will send to the ARM tree.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-02-26 15:21:22 +01:00
arch EFI updates for v5.7: 2020-02-26 15:21:22 +01:00
block block-5.6-2020-02-05 2020-02-06 06:15:23 +00:00
certs certs: Add wrapper function to check blacklisted binary hash 2019-11-12 12:25:50 +11:00
crypto Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity 2020-02-20 15:15:16 -08:00
Documentation EFI updates for v5.7: 2020-02-26 15:21:22 +01:00
drivers EFI updates for v5.7: 2020-02-26 15:21:22 +01:00
fs EFI updates for v5.7: 2020-02-26 15:21:22 +01:00
include EFI updates for v5.7: 2020-02-26 15:21:22 +01:00
init Various fixes: 2020-02-11 16:39:18 -08:00
ipc Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()" 2020-02-21 11:22:15 -08:00
kernel Two fixes for the irq core code which are follow ups to the recent MSI 2020-02-22 17:25:46 -08:00
lib Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2020-02-24 11:40:23 -08:00
LICENSES LICENSES: Rename other to deprecated 2019-05-03 06:34:32 -06:00
mm Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2020-02-24 11:32:15 -08:00
net Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-02-21 11:59:51 -08:00
samples Kbuild updates for v5.6 (2nd) 2020-02-09 16:05:50 -08:00
scripts scripts/get_maintainer.pl: deprioritize old Fixes: addresses 2020-02-21 11:22:15 -08:00
security EFI updates for v5.7: 2020-02-26 15:21:22 +01:00
sound ASoC: Fixes for v5.6 2020-02-18 13:33:39 +01:00
tools Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-02-21 11:59:51 -08:00
usr Kbuild updates for v5.6 (2nd) 2020-02-09 16:05:50 -08:00
virt KVM: Disable preemption in kvm_get_running_vcpu() 2020-02-12 12:19:35 +01:00
.clang-format clang-format: Update with the latest for_each macro list 2019-08-31 10:00:51 +02:00
.cocciconfig scripts: add Linux .cocciconfig for coccinelle 2016-07-22 12:13:39 +02:00
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore modpost: dump missing namespaces into a single modules.nsdeps file 2019-11-11 20:10:01 +09:00
.mailmap A handful of small documentation fixes that wandered in. 2020-02-07 13:03:10 -08:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: Hand MIPS over to Thomas 2020-02-24 22:43:18 -08:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig docs: kbuild: convert docs to ReST and rename to *.rst 2019-06-14 14:21:21 -06:00
MAINTAINERS Merge branch 'mips-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2020-02-25 10:09:41 -08:00
Makefile Linux 5.6-rc3 2020-02-23 16:17:42 -08:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.