mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-16 07:24:39 +08:00
3efbcee8d4
This adds support for the Delta DPS-920AB PSU. Only missing feature is fan control which the PSU supports. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210607103431.2039073-1-robert.marko@sartura.hr [groeck: Add MODULE_IMPORT_NS(PMBUS);] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
74 lines
1.7 KiB
ReStructuredText
74 lines
1.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
Kernel driver dps920ab
|
|
========================
|
|
|
|
Supported chips:
|
|
|
|
* Delta DPS920AB
|
|
|
|
Prefix: 'dps920ab'
|
|
|
|
Addresses scanned: -
|
|
|
|
Authors:
|
|
Robert Marko <robert.marko@sartura.hr>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements support for Delta DPS920AB 920W 54V DC single output
|
|
power supply with PMBus support.
|
|
|
|
The driver is a client driver to the core PMBus driver.
|
|
Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
|
|
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not auto-detect devices. You will have to instantiate the
|
|
devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
|
|
details.
|
|
|
|
|
|
Sysfs entries
|
|
-------------
|
|
|
|
======================= ======================================================
|
|
curr1_label "iin"
|
|
curr1_input Measured input current
|
|
curr1_alarm Input current high alarm
|
|
|
|
curr2_label "iout1"
|
|
curr2_input Measured output current
|
|
curr2_max Maximum output current
|
|
curr2_rated_max Maximum rated output current
|
|
|
|
in1_label "vin"
|
|
in1_input Measured input voltage
|
|
in1_alarm Input voltage alarm
|
|
|
|
in2_label "vout1"
|
|
in2_input Measured output voltage
|
|
in2_rated_min Minimum rated output voltage
|
|
in2_rated_max Maximum rated output voltage
|
|
in2_alarm Output voltage alarm
|
|
|
|
power1_label "pin"
|
|
power1_input Measured input power
|
|
power1_alarm Input power high alarm
|
|
|
|
power2_label "pout1"
|
|
power2_input Measured output power
|
|
power2_rated_max Maximum rated output power
|
|
|
|
temp[1-3]_input Measured temperature
|
|
temp[1-3]_alarm Temperature alarm
|
|
|
|
fan1_alarm Fan 1 warning.
|
|
fan1_fault Fan 1 fault.
|
|
fan1_input Fan 1 speed in RPM.
|
|
======================= ======================================================
|