mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
2d3f595016
There is nothing special to be done for interrupts which can wakeup the device from sleep on CP-INTC, but not having a set_wake implemented prevents use of common drivers which expect this function to be implemented for all wakeup interrupt sources. This patch fixes the issue encountered when using the omap-rtc driver on DA850. On DA850 the RTC alarm interrupt is used to wake up the SoC from deep sleep mode. Without this patch, the disable_irq_wake throws an unbalanced wake disable warning while resuming because the previous enable call fails for lack of set_wake implementation. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
170 lines
4.1 KiB
C
170 lines
4.1 KiB
C
/*
|
|
* TI Common Platform Interrupt Controller (cp_intc) driver
|
|
*
|
|
* Author: Steve Chen <schen@mvista.com>
|
|
* Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/cp_intc.h>
|
|
|
|
static void __iomem *cp_intc_base;
|
|
|
|
static inline unsigned int cp_intc_read(unsigned offset)
|
|
{
|
|
return __raw_readl(cp_intc_base + offset);
|
|
}
|
|
|
|
static inline void cp_intc_write(unsigned long value, unsigned offset)
|
|
{
|
|
__raw_writel(value, cp_intc_base + offset);
|
|
}
|
|
|
|
static void cp_intc_ack_irq(unsigned int irq)
|
|
{
|
|
cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
|
|
}
|
|
|
|
/* Disable interrupt */
|
|
static void cp_intc_mask_irq(unsigned int irq)
|
|
{
|
|
/* XXX don't know why we need to disable nIRQ here... */
|
|
cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
|
|
cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
|
|
cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
|
|
}
|
|
|
|
/* Enable interrupt */
|
|
static void cp_intc_unmask_irq(unsigned int irq)
|
|
{
|
|
cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
|
|
}
|
|
|
|
static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
|
|
{
|
|
unsigned reg = BIT_WORD(irq);
|
|
unsigned mask = BIT_MASK(irq);
|
|
unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg));
|
|
unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg));
|
|
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
polarity |= mask;
|
|
type |= mask;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
polarity &= ~mask;
|
|
type |= mask;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
polarity |= mask;
|
|
type &= ~mask;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
polarity &= ~mask;
|
|
type &= ~mask;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
|
|
cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Faking this allows us to to work with suspend functions of
|
|
* generic drivers which call {enable|disable}_irq_wake for
|
|
* wake up interrupt sources (eg RTC on DA850).
|
|
*/
|
|
static int cp_intc_set_wake(unsigned int irq, unsigned int on)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip cp_intc_irq_chip = {
|
|
.name = "cp_intc",
|
|
.ack = cp_intc_ack_irq,
|
|
.mask = cp_intc_mask_irq,
|
|
.unmask = cp_intc_unmask_irq,
|
|
.set_type = cp_intc_set_irq_type,
|
|
.set_wake = cp_intc_set_wake,
|
|
};
|
|
|
|
void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
|
|
u8 *irq_prio)
|
|
{
|
|
unsigned num_reg = BITS_TO_LONGS(num_irq);
|
|
int i;
|
|
|
|
cp_intc_base = base;
|
|
|
|
cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
|
|
|
|
/* Disable all host interrupts */
|
|
cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
|
|
|
|
/* Disable system interrupts */
|
|
for (i = 0; i < num_reg; i++)
|
|
cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
|
|
|
|
/* Set to normal mode, no nesting, no priority hold */
|
|
cp_intc_write(0, CP_INTC_CTRL);
|
|
cp_intc_write(0, CP_INTC_HOST_CTRL);
|
|
|
|
/* Clear system interrupt status */
|
|
for (i = 0; i < num_reg; i++)
|
|
cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
|
|
|
|
/* Enable nIRQ (what about nFIQ?) */
|
|
cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
|
|
|
|
/*
|
|
* Priority is determined by host channel: lower channel number has
|
|
* higher priority i.e. channel 0 has highest priority and channel 31
|
|
* had the lowest priority.
|
|
*/
|
|
num_reg = (num_irq + 3) >> 2; /* 4 channels per register */
|
|
if (irq_prio) {
|
|
unsigned j, k;
|
|
u32 val;
|
|
|
|
for (k = i = 0; i < num_reg; i++) {
|
|
for (val = j = 0; j < 4; j++, k++) {
|
|
val >>= 8;
|
|
if (k < num_irq)
|
|
val |= irq_prio[k] << 24;
|
|
}
|
|
|
|
cp_intc_write(val, CP_INTC_CHAN_MAP(i));
|
|
}
|
|
} else {
|
|
/*
|
|
* Default everything to channel 15 if priority not specified.
|
|
* Note that channel 0-1 are mapped to nFIQ and channels 2-31
|
|
* are mapped to nIRQ.
|
|
*/
|
|
for (i = 0; i < num_reg; i++)
|
|
cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
|
|
}
|
|
|
|
/* Set up genirq dispatching for cp_intc */
|
|
for (i = 0; i < num_irq; i++) {
|
|
set_irq_chip(i, &cp_intc_irq_chip);
|
|
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
|
|
set_irq_handler(i, handle_edge_irq);
|
|
}
|
|
|
|
/* Enable global interrupt */
|
|
cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
|
|
}
|