linux/arch/arc/mm/init.c
Vineet Gupta ff1c0b6a79 ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE
HIGHMEM support bumped the default memory size for nsim platform to 1G.
Thus total memory ended at the very edge of start of peripherals address
space. With linux link base shifted, memory started bleeding into
peripheral space which caused early boot bad_page spew !

Fixes: 29e332261d ("ARC: mm: HIGHMEM: populate high memory from DT")
Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-17 11:06:43 +05:30

206 lines
5.1 KiB
C

/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/initrd.h>
#endif
#include <linux/swap.h>
#include <linux/module.h>
#include <linux/highmem.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
EXPORT_SYMBOL(empty_zero_page);
static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
#endif
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
low_mem_sz = memparse(str, NULL) & PAGE_MASK;
/* early console might not be setup yet - it will show up later */
pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
return 0;
}
early_param("mem", setup_mem_sz);
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
int in_use = 0;
if (!low_mem_sz) {
if (base != low_mem_start)
panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
low_mem_sz = size;
in_use = 1;
} else {
#ifdef CONFIG_HIGHMEM
high_mem_start = base;
high_mem_sz = size;
in_use = 1;
#endif
}
pr_info("Memory @ %llx [%lldM] %s\n",
base, TO_MB(size), !in_use ? "Not used":"");
}
#ifdef CONFIG_BLK_DEV_INITRD
static int __init early_initrd(char *p)
{
unsigned long start, size;
char *endp;
start = memparse(p, &endp);
if (*endp == ',') {
size = memparse(endp + 1, NULL);
initrd_start = (unsigned long)__va(start);
initrd_end = (unsigned long)__va(start + size);
}
return 0;
}
early_param("initrd", early_initrd);
#endif
/*
* First memory setup routine called from setup_arch()
* 1. setup swapper's mm @init_mm
* 2. Count the pages we have and setup bootmem allocator
* 3. zone setup
*/
void __init setup_arch_memory(void)
{
unsigned long zones_size[MAX_NR_ZONES];
unsigned long zones_holes[MAX_NR_ZONES];
init_mm.start_code = (unsigned long)_text;
init_mm.end_code = (unsigned long)_etext;
init_mm.end_data = (unsigned long)_edata;
init_mm.brk = (unsigned long)_end;
/* first page of system - kernel .vector starts here */
min_low_pfn = ARCH_PFN_OFFSET;
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
#ifdef CONFIG_HIGHMEM
min_high_pfn = PFN_DOWN(high_mem_start);
max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
#endif
max_mapnr = max_pfn - min_low_pfn;
/*------------- bootmem allocator setup -----------------------*/
/*
* seed the bootmem allocator after any DT memory node parsing or
* "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
*
* Only low mem is added, otherwise we have crashes when allocating
* mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
* avail memory, ending in highmem with a > 32-bit address. However
* it then tries to memset it with a truncaed 32-bit handle, causing
* the crash
*/
memblock_add(low_mem_start, low_mem_sz);
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
#endif
memblock_dump_all();
/*----------------- node/zones setup --------------------------*/
memset(zones_size, 0, sizeof(zones_size));
memset(zones_holes, 0, sizeof(zones_holes));
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
zones_holes[ZONE_NORMAL] = 0;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
/* This handles the peripheral address space hole */
zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
#endif
/*
* We can't use the helper free_area_init(zones[]) because it uses
* PAGE_OFFSET to compute the @min_low_pfn which would be wrong
* when our kernel doesn't start at PAGE_OFFSET, i.e.
* PAGE_OFFSET != CONFIG_LINUX_LINK_BASE
*/
free_area_init_node(0, /* node-id */
zones_size, /* num pages per zone */
min_low_pfn, /* first pfn of node */
zones_holes); /* holes */
#ifdef CONFIG_HIGHMEM
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
#endif
}
/*
* mem_init - initializes memory
*
* Frees up bootmem
* Calculates and displays memory available/used
*/
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
reset_all_zones_managed_pages();
for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
free_all_bootmem();
mem_init_print_info(NULL);
}
/*
* free_initmem: Free all the __init memory.
*/
void __init_refok free_initmem(void)
{
free_initmem_default(-1);
}
#ifdef CONFIG_BLK_DEV_INITRD
void __init free_initrd_mem(unsigned long start, unsigned long end)
{
free_reserved_area((void *)start, (void *)end, -1, "initrd");
}
#endif