mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
edef4285af
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find arch/arm/boot/dts -type f \( -iname "*.dts" -o -iname "*.dtsi" \) -exec sed -i \
-e "s/@\([0-9a-fA-FxX\.;:#]\+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 \
{/g" -e "s/@0\+\(.\+\) {/@\1 {/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve also a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b737 ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[krzk: Rerun the command to include few more changes, adjust the commit msg]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
540 lines
12 KiB
Plaintext
540 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Insignal's Exynos4412 based Origen board device tree source
|
|
*
|
|
* Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Device tree source file for Insignal's Origen board which is based on
|
|
* Samsung's Exynos4412 SoC.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos4412.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "exynos-mfc-reserved-memory.dtsi"
|
|
|
|
/ {
|
|
model = "Insignal Origen evaluation board based on Exynos4412";
|
|
compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0x40000000 0x40000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs ="console=ttySAC2,115200";
|
|
stdout-path = &serial_2;
|
|
};
|
|
|
|
firmware@203f000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x0203F000 0x1000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mmc_reg: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "VMEM_VDD_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing {
|
|
clock-frequency = <47500000>;
|
|
hactive = <1024>;
|
|
vactive = <600>;
|
|
hfront-porch = <64>;
|
|
hback-porch = <16>;
|
|
hsync-len = <48>;
|
|
vback-porch = <64>;
|
|
vfront-porch = <16>;
|
|
vsync-len = <3>;
|
|
};
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
xxti {
|
|
compatible = "samsung,clock-xxti";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
xusbxti {
|
|
compatible = "samsung,clock-xusbxti";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&exynos_usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci {
|
|
samsung,vbus-gpio = <&gpx3 5 1>;
|
|
status = "okay";
|
|
|
|
port@1 {
|
|
status = "okay";
|
|
};
|
|
port@2 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&fimd {
|
|
pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c_0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <20000>;
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
s5m8767_pmic@66 {
|
|
compatible = "samsung,s5m8767-pmic";
|
|
reg = <0x66>;
|
|
|
|
s5m8767,pmic-buck-default-dvs-idx = <3>;
|
|
|
|
s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
|
|
<&gpx2 4 GPIO_ACTIVE_HIGH>,
|
|
<&gpx2 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
|
|
<&gpm3 6 GPIO_ACTIVE_HIGH>,
|
|
<&gpm3 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>;
|
|
|
|
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
|
<1100000>, <1100000>,
|
|
<1100000>, <1100000>,
|
|
<1100000>, <1100000>;
|
|
|
|
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>;
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_M12";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VDDIOAP_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDDQ_PRE";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VDD18_2M";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VDD10_MPLL";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VDD10_XPLL";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VDD10_MIPI";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "VDD33_LCD";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VDD18_MIPI";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD18_ABB1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD33_UOTG";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDDIOPERI_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDD18_ABB02";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDD10_USH";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDD18_HSIC";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "VDDIOAP_MMC012_28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "VDDIOPERI_28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "DVDD25";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "VDD28_CAM";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "VDD28_AF";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "VDDA28_2M";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "VDD28_TF";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "VDD33_A31";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "VDD18_CAM";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "VDD18_A31";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "GPS_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo28_reg: LDO28 {
|
|
regulator-name = "DVDD12";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "vdd_m12";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "vdd12_5m";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "vddf28_emmc";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&keypad {
|
|
samsung,keypad-num-rows = <3>;
|
|
samsung,keypad-num-columns = <2>;
|
|
linux,keypad-no-autorepeat;
|
|
wakeup-source;
|
|
pinctrl-0 = <&keypad_rows &keypad_cols>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
key_home {
|
|
keypad,row = <0>;
|
|
keypad,column = <0>;
|
|
linux,code = <KEY_HOME>;
|
|
};
|
|
|
|
key_down {
|
|
keypad,row = <0>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_DOWN>;
|
|
};
|
|
|
|
key_up {
|
|
keypad,row = <1>;
|
|
keypad,column = <0>;
|
|
linux,code = <KEY_UP>;
|
|
};
|
|
|
|
key_menu {
|
|
keypad,row = <1>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_MENU>;
|
|
};
|
|
|
|
key_back {
|
|
keypad,row = <2>;
|
|
keypad,column = <0>;
|
|
linux,code = <KEY_BACK>;
|
|
};
|
|
|
|
key_enter {
|
|
keypad,row = <2>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_ENTER>;
|
|
};
|
|
};
|
|
|
|
&mshc_0 {
|
|
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
broken-cd;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
keypad_rows: keypad-rows {
|
|
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
|
};
|
|
|
|
keypad_cols: keypad-cols {
|
|
samsung,pins = "gpx1-0", "gpx1-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci_2 {
|
|
bus-width = <4>;
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&mmc_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_3 {
|
|
status = "okay";
|
|
};
|