korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-14 15:54:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
e7a5cd063c
linux/arch/x86/power/cpu.c
Konrad Rzeszutek Wilk e7a5cd063c x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed. 
During the ACPI S3 resume path the trampoline code handles it already.

During the ACPI S3 suspend phase (acpi_suspend_lowlevel) we set:
early_gdt_descr.address = (..)get_cpu_gdt_table(smp_processor_id());

which is then used during the resume path and has the same exact
value as what the store/load_gdt do with the saved_context
(which is saved/restored via save/restore_processor_state()).

The flow during resume is complex and for 64-bit kernels we use three GDTs
- one early bootstrap GDT (wakeup_igdt) that we load to workaround
broken BIOSes, an early Protected Mode to Long Mode transition one
(tr_gdt), and the final one - early_gdt_descr (which points to the real GDT).

The early ('wakeup_gdt') is loaded in 'trampoline_start' for working
around broken BIOSes, and then when we end up in Protected Mode in the
startup_32 (in trampoline_64.s, not head_32.s) we use the 'tr_gdt'
(still in trampoline_64.s). This 'tr_gdt' has a a 32-bit code segment,
64-bit code segment with L=1, and a 32-bit data segment.

Once we have transitioned from Protected Mode to Long Mode we then
set the GDT to 'early_gdt_desc' and then via an iretq emerge in
wakeup_long64 (set via 'initial_code' variable in acpi_suspend_lowlevel).

In the wakeup_long64 we end up restoring the %rip (which is set to
'resume_point') and jump there.

In 'resume_point' we call 'restore_processor_state' which does
the load_gdt on the saved context. This load_gdt is redundant as the
GDT loaded via early_gdt_desc is the same.

Here is the call-chain:
 wakeup_start
   |- lgdtl wakeup_gdt [the work-around broken BIOSes]
   |
   \-- trampoline_start (trampoline_64.S)
         |- lgdtl tr_gdt
         |
         \-- startup_32 (trampoline_64.S)
               |
               \-- startup_64 (trampoline_64.S)
                      |
                      \-- secondary_startup_64
                               |- lgdtl early_gdt_desc
                               | ...
                               |- movq initial_code(%rip), %eax
                               |-.. lretq
                               \-- wakeup_64
                                     |-- other registers are reloaded
                                     |-- call restore_processor_state

The hibernate path is much simpler. During the saving of the hibernation
image we call save_processor_state() and save the contents of that along
with the rest of the kernel in the hibernation image destination.
We save the EIP of 'restore_registers' (restore_jump_address) and cr3
(restore_cr3).

During hibernate resume, the 'restore_registers' (via the
'restore_jump_address) in hibernate_asm_64.S is invoked which restores
the contents of most registers. Naturally the resume path benefits from
already being in 64-bit mode, so it does not have to load the GDT.

It only reloads the cr3 (from restore_cr3) and continues on. Note that
the restoration of the restore image page-tables is done prior to this.

After the 'restore_registers' it returns and we end up called
restore_processor_state() - where we reload the GDT. The reload of
the GDT is not needed as bootup kernel has already loaded the GDT which
is at the same physical location as the the restored kernel.

Note that the hibernation path assumes the GDT is correct during its
'restore_registers'. The assumption in the code is that the restored
image is the same as saved - meaning we are not trying to restore
an different kernel in the virtual address space of a new kernel.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1365194544-14648-2-git-send-email-konrad.wilk@oracle.com
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-11 15:39:38 -07:00

320 lines
8.0 KiB
C
Raw Blame History

/*
* Suspend support specific for i386/x86-64.
*
* Distribute under GPLv2
*
* Copyright (c) 2007 Rafael J. Wysocki <rjw@sisk.pl>
* Copyright (c) 2002 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
*/
#include <linux/suspend.h>
#include <linux/export.h>
#include <linux/smp.h>
#include <asm/pgtable.h>
#include <asm/proto.h>
#include <asm/mtrr.h>
#include <asm/page.h>
#include <asm/mce.h>
#include <asm/xcr.h>
#include <asm/suspend.h>
#include <asm/debugreg.h>
#include <asm/fpu-internal.h> /* pcntxt_mask */
#include <asm/cpu.h>
#ifdef CONFIG_X86_32
static struct saved_context saved_context;
unsigned long saved_context_ebx;
unsigned long saved_context_esp, saved_context_ebp;
unsigned long saved_context_esi, saved_context_edi;
unsigned long saved_context_eflags;
#else
/* CONFIG_X86_64 */
struct saved_context saved_context;
#endif
/**
* __save_processor_state - save CPU registers before creating a
* hibernation image and before restoring the memory state from it
* @ctxt - structure to store the registers contents in
*
* NOTE: If there is a CPU register the modification of which by the
* boot kernel (ie. the kernel used for loading the hibernation image)
* might affect the operations of the restored target kernel (ie. the one
* saved in the hibernation image), then its contents must be saved by this
* function. In other words, if kernel A is hibernated and different
* kernel B is used for loading the hibernation image into memory, the
* kernel A's __save_processor_state() function must save all registers
* needed by kernel A, so that it can operate correctly after the resume
* regardless of what kernel B does in the meantime.
*/
static void __save_processor_state(struct saved_context *ctxt)
{
#ifdef CONFIG_X86_32
mtrr_save_fixed_ranges(NULL);
#endif
kernel_fpu_begin();
/*
* descriptor tables
*/
#ifdef CONFIG_X86_32
store_gdt(&ctxt->gdt);
store_idt(&ctxt->idt);
#else
/* CONFIG_X86_64 */
store_idt((struct desc_ptr *)&ctxt->idt_limit);
#endif
store_tr(ctxt->tr);
/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
/*
* segment registers
*/
#ifdef CONFIG_X86_32
savesegment(es, ctxt->es);
savesegment(fs, ctxt->fs);
savesegment(gs, ctxt->gs);
savesegment(ss, ctxt->ss);
#else
/* CONFIG_X86_64 */
asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs));
asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss));
rdmsrl(MSR_FS_BASE, ctxt->fs_base);
rdmsrl(MSR_GS_BASE, ctxt->gs_base);
rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
mtrr_save_fixed_ranges(NULL);
rdmsrl(MSR_EFER, ctxt->efer);
#endif
/*
* control registers
*/
ctxt->cr0 = read_cr0();
ctxt->cr2 = read_cr2();
ctxt->cr3 = read_cr3();
#ifdef CONFIG_X86_32
ctxt->cr4 = read_cr4_safe();
#else
/* CONFIG_X86_64 */
ctxt->cr4 = read_cr4();
ctxt->cr8 = read_cr8();
#endif
ctxt->misc_enable_saved = !rdmsrl_safe(MSR_IA32_MISC_ENABLE,
&ctxt->misc_enable);
}
/* Needed by apm.c */
void save_processor_state(void)
{
__save_processor_state(&saved_context);
x86_platform.save_sched_clock_state();
}
#ifdef CONFIG_X86_32
EXPORT_SYMBOL(save_processor_state);
#endif
static void do_fpu_end(void)
{
/*
* Restore FPU regs if necessary.
*/
kernel_fpu_end();
}
static void fix_processor_context(void)
{
int cpu = smp_processor_id();
struct tss_struct *t = &per_cpu(init_tss, cpu);
set_tss_desc(cpu, t); /*
* This just modifies memory; should not be
* necessary. But... This is necessary, because
* 386 hardware has concept of busy TSS or some
* similar stupidity.
*/
#ifdef CONFIG_X86_64
get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
syscall_init(); /* This sets MSR_*STAR and related */
#endif
load_TR_desc(); /* This does ltr */
load_LDT(&current->active_mm->context); /* This does lldt */
}
/**
* __restore_processor_state - restore the contents of CPU registers saved
* by __save_processor_state()
* @ctxt - structure to load the registers contents from
*/
static void __restore_processor_state(struct saved_context *ctxt)
{
if (ctxt->misc_enable_saved)
wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable);
/*
* control registers
*/
/* cr4 was introduced in the Pentium CPU */
#ifdef CONFIG_X86_32
if (ctxt->cr4)
write_cr4(ctxt->cr4);
#else
/* CONFIG X86_64 */
wrmsrl(MSR_EFER, ctxt->efer);
write_cr8(ctxt->cr8);
write_cr4(ctxt->cr4);
#endif
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
write_cr0(ctxt->cr0);
/*
* now restore the descriptor tables to their proper values
* ltr is done i fix_processor_context().
*/
#ifdef CONFIG_X86_32
load_gdt(&ctxt->gdt);
load_idt(&ctxt->idt);
#else
/* CONFIG_X86_64 */
load_idt((const struct desc_ptr *)&ctxt->idt_limit);
#endif
/*
* segment registers
*/
#ifdef CONFIG_X86_32
loadsegment(es, ctxt->es);
loadsegment(fs, ctxt->fs);
loadsegment(gs, ctxt->gs);
loadsegment(ss, ctxt->ss);
/*
* sysenter MSRs
*/
if (boot_cpu_has(X86_FEATURE_SEP))
enable_sep_cpu();
#else
/* CONFIG_X86_64 */
asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
load_gs_index(ctxt->gs);
asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
wrmsrl(MSR_FS_BASE, ctxt->fs_base);
wrmsrl(MSR_GS_BASE, ctxt->gs_base);
wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
#endif
/*
* restore XCR0 for xsave capable cpu's.
*/
if (cpu_has_xsave)
xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
fix_processor_context();
do_fpu_end();
x86_platform.restore_sched_clock_state();
mtrr_bp_restore();
}
/* Needed by apm.c */
void restore_processor_state(void)
{
__restore_processor_state(&saved_context);
}
#ifdef CONFIG_X86_32
EXPORT_SYMBOL(restore_processor_state);
#endif
/*
* When bsp_check() is called in hibernate and suspend, cpu hotplug
* is disabled already. So it's unnessary to handle race condition between
* cpumask query and cpu hotplug.
*/
static int bsp_check(void)
{
if (cpumask_first(cpu_online_mask) != 0) {
pr_warn("CPU0 is offline.\n");
return -ENODEV;
}
return 0;
}
static int bsp_pm_callback(struct notifier_block *nb, unsigned long action,
void *ptr)
{
int ret = 0;
switch (action) {
case PM_SUSPEND_PREPARE:
case PM_HIBERNATION_PREPARE:
ret = bsp_check();
break;
#ifdef CONFIG_DEBUG_HOTPLUG_CPU0
case PM_RESTORE_PREPARE:
/*
* When system resumes from hibernation, online CPU0 because
* 1. it's required for resume and
* 2. the CPU was online before hibernation
*/
if (!cpu_online(0))
_debug_hotplug_cpu(0, 1);
break;
case PM_POST_RESTORE:
/*
* When a resume really happens, this code won't be called.
*
* This code is called only when user space hibernation software
* prepares for snapshot device during boot time. So we just
* call _debug_hotplug_cpu() to restore to CPU0's state prior to
* preparing the snapshot device.
*
* This works for normal boot case in our CPU0 hotplug debug
* mode, i.e. CPU0 is offline and user mode hibernation
* software initializes during boot time.
*
* If CPU0 is online and user application accesses snapshot
* device after boot time, this will offline CPU0 and user may
* see different CPU0 state before and after accessing
* the snapshot device. But hopefully this is not a case when
* user debugging CPU0 hotplug. Even if users hit this case,
* they can easily online CPU0 back.
*
* To simplify this debug code, we only consider normal boot
* case. Otherwise we need to remember CPU0's state and restore
* to that state and resolve racy conditions etc.
*/
_debug_hotplug_cpu(0, 0);
break;
#endif
default:
break;
}
return notifier_from_errno(ret);
}
static int __init bsp_pm_check_init(void)
{
/*
* Set this bsp_pm_callback as lower priority than
* cpu_hotplug_pm_callback. So cpu_hotplug_pm_callback will be called
* earlier to disable cpu hotplug before bsp online check.
*/
pm_notifier(bsp_pm_callback, -INT_MAX);
return 0;
}
core_initcall(bsp_pm_check_init);
Reference in New Issue View Git Blame Copy Permalink