mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 09:44:18 +08:00
10b3ecdbd4
This fixes two erroneous defines for the PLLs and adds new defines for the reset pin controls. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
452 lines
11 KiB
C
452 lines
11 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License v2
|
|
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
|
|
*
|
|
* U5500 PRCM Unit interface driver
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/dbx500-prcmu.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/db5500-regs.h>
|
|
#include "dbx500-prcmu-regs.h"
|
|
|
|
#define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
|
|
#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
|
|
#define PRCM_REQ_MB1_HEADER (_PRCM_MB_HEADER + 0x1)
|
|
#define PRCM_REQ_MB2_HEADER (_PRCM_MB_HEADER + 0x2)
|
|
#define PRCM_REQ_MB3_HEADER (_PRCM_MB_HEADER + 0x3)
|
|
#define PRCM_REQ_MB4_HEADER (_PRCM_MB_HEADER + 0x4)
|
|
#define PRCM_REQ_MB5_HEADER (_PRCM_MB_HEADER + 0x5)
|
|
#define PRCM_REQ_MB6_HEADER (_PRCM_MB_HEADER + 0x6)
|
|
#define PRCM_REQ_MB7_HEADER (_PRCM_MB_HEADER + 0x7)
|
|
#define PRCM_ACK_MB0_HEADER (_PRCM_MB_HEADER + 0x8)
|
|
#define PRCM_ACK_MB1_HEADER (_PRCM_MB_HEADER + 0x9)
|
|
#define PRCM_ACK_MB2_HEADER (_PRCM_MB_HEADER + 0xa)
|
|
#define PRCM_ACK_MB3_HEADER (_PRCM_MB_HEADER + 0xb)
|
|
#define PRCM_ACK_MB4_HEADER (_PRCM_MB_HEADER + 0xc)
|
|
#define PRCM_ACK_MB5_HEADER (_PRCM_MB_HEADER + 0xd)
|
|
#define PRCM_ACK_MB6_HEADER (_PRCM_MB_HEADER + 0xe)
|
|
#define PRCM_ACK_MB7_HEADER (_PRCM_MB_HEADER + 0xf)
|
|
|
|
/* Req Mailboxes */
|
|
#define PRCM_REQ_MB0 (tcdm_base + 0xFD8)
|
|
#define PRCM_REQ_MB1 (tcdm_base + 0xFCC)
|
|
#define PRCM_REQ_MB2 (tcdm_base + 0xFC4)
|
|
#define PRCM_REQ_MB3 (tcdm_base + 0xFC0)
|
|
#define PRCM_REQ_MB4 (tcdm_base + 0xF98)
|
|
#define PRCM_REQ_MB5 (tcdm_base + 0xF90)
|
|
#define PRCM_REQ_MB6 (tcdm_base + 0xF8C)
|
|
#define PRCM_REQ_MB7 (tcdm_base + 0xF84)
|
|
|
|
/* Ack Mailboxes */
|
|
#define PRCM_ACK_MB0 (tcdm_base + 0xF38)
|
|
#define PRCM_ACK_MB1 (tcdm_base + 0xF30)
|
|
#define PRCM_ACK_MB2 (tcdm_base + 0xF24)
|
|
#define PRCM_ACK_MB3 (tcdm_base + 0xF20)
|
|
#define PRCM_ACK_MB4 (tcdm_base + 0xF1C)
|
|
#define PRCM_ACK_MB5 (tcdm_base + 0xF14)
|
|
#define PRCM_ACK_MB6 (tcdm_base + 0xF0C)
|
|
#define PRCM_ACK_MB7 (tcdm_base + 0xF08)
|
|
|
|
enum mb_return_code {
|
|
RC_SUCCESS,
|
|
RC_FAIL,
|
|
};
|
|
|
|
/* Mailbox 0 headers. */
|
|
enum mb0_header {
|
|
/* request */
|
|
RMB0H_PWR_STATE_TRANS = 1,
|
|
RMB0H_WAKE_UP_CFG,
|
|
RMB0H_RD_WAKE_UP_ACK,
|
|
/* acknowledge */
|
|
AMB0H_WAKE_UP = 1,
|
|
};
|
|
|
|
/* Mailbox 5 headers. */
|
|
enum mb5_header {
|
|
MB5H_I2C_WRITE = 1,
|
|
MB5H_I2C_READ,
|
|
};
|
|
|
|
/* Request mailbox 5 fields. */
|
|
#define PRCM_REQ_MB5_I2C_SLAVE (PRCM_REQ_MB5 + 0)
|
|
#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 1)
|
|
#define PRCM_REQ_MB5_I2C_SIZE (PRCM_REQ_MB5 + 2)
|
|
#define PRCM_REQ_MB5_I2C_DATA (PRCM_REQ_MB5 + 4)
|
|
|
|
/* Acknowledge mailbox 5 fields. */
|
|
#define PRCM_ACK_MB5_RETURN_CODE (PRCM_ACK_MB5 + 0)
|
|
#define PRCM_ACK_MB5_I2C_DATA (PRCM_ACK_MB5 + 4)
|
|
|
|
#define NUM_MB 8
|
|
#define MBOX_BIT BIT
|
|
#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
|
|
|
|
/*
|
|
* Used by MCDE to setup all necessary PRCMU registers
|
|
*/
|
|
#define PRCMU_RESET_DSIPLL 0x00004000
|
|
#define PRCMU_UNCLAMP_DSIPLL 0x00400800
|
|
|
|
/* HDMI CLK MGT PLLSW=001 (PLLSOC0), PLLDIV=0x8, = 50 Mhz*/
|
|
#define PRCMU_DSI_CLOCK_SETTING 0x00000128
|
|
/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
|
|
#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135
|
|
#define PRCMU_PLLDSI_FREQ_SETTING 0x00020121
|
|
#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002
|
|
#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000201
|
|
#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101
|
|
|
|
#define PRCMU_ENABLE_PLLDSI 0x00000001
|
|
#define PRCMU_DISABLE_PLLDSI 0x00000000
|
|
|
|
#define PRCMU_DSI_RESET_SW 0x00000003
|
|
#define PRCMU_RESOUTN0_PIN 0x00000001
|
|
#define PRCMU_RESOUTN1_PIN 0x00000002
|
|
#define PRCMU_RESOUTN2_PIN 0x00000004
|
|
|
|
#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
|
|
|
|
/*
|
|
* mb0_transfer - state needed for mailbox 0 communication.
|
|
* @lock: The transaction lock.
|
|
*/
|
|
static struct {
|
|
spinlock_t lock;
|
|
} mb0_transfer;
|
|
|
|
/*
|
|
* mb5_transfer - state needed for mailbox 5 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
* @ack: Reply ("acknowledge") data.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
struct {
|
|
u8 header;
|
|
u8 status;
|
|
u8 value[4];
|
|
} ack;
|
|
} mb5_transfer;
|
|
|
|
/* PRCMU TCDM base IO address. */
|
|
static __iomem void *tcdm_base;
|
|
|
|
/**
|
|
* db5500_prcmu_abb_read() - Read register value(s) from the ABB.
|
|
* @slave: The I2C slave address.
|
|
* @reg: The (start) register address.
|
|
* @value: The read out value(s).
|
|
* @size: The number of registers to read.
|
|
*
|
|
* Reads register value(s) from the ABB.
|
|
* @size has to be <= 4.
|
|
*/
|
|
int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
int r;
|
|
|
|
if ((size < 1) || (4 < size))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb5_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
|
|
cpu_relax();
|
|
writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
|
|
writeb(reg, PRCM_REQ_MB5_I2C_REG);
|
|
writeb(size, PRCM_REQ_MB5_I2C_SIZE);
|
|
writeb(MB5H_I2C_READ, PRCM_REQ_MB5_HEADER);
|
|
|
|
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb5_transfer.work);
|
|
|
|
r = 0;
|
|
if ((mb5_transfer.ack.header == MB5H_I2C_READ) &&
|
|
(mb5_transfer.ack.status == RC_SUCCESS))
|
|
memcpy(value, mb5_transfer.ack.value, (size_t)size);
|
|
else
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb5_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* db5500_prcmu_abb_write() - Write register value(s) to the ABB.
|
|
* @slave: The I2C slave address.
|
|
* @reg: The (start) register address.
|
|
* @value: The value(s) to write.
|
|
* @size: The number of registers to write.
|
|
*
|
|
* Writes register value(s) to the ABB.
|
|
* @size has to be <= 4.
|
|
*/
|
|
int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
int r;
|
|
|
|
if ((size < 1) || (4 < size))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb5_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
|
|
cpu_relax();
|
|
writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
|
|
writeb(reg, PRCM_REQ_MB5_I2C_REG);
|
|
writeb(size, PRCM_REQ_MB5_I2C_SIZE);
|
|
memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size);
|
|
writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER);
|
|
|
|
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb5_transfer.work);
|
|
|
|
if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) &&
|
|
(mb5_transfer.ack.status == RC_SUCCESS))
|
|
r = 0;
|
|
else
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb5_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
int db5500_prcmu_enable_dsipll(void)
|
|
{
|
|
int i;
|
|
|
|
/* Enable DSIPLL_RESETN resets */
|
|
writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
|
|
/* Unclamp DSIPLL in/out */
|
|
writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
|
|
/* Set DSI PLL FREQ */
|
|
writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
|
|
writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
|
|
PRCM_DSI_PLLOUT_SEL);
|
|
/* Enable Escape clocks */
|
|
writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
|
|
|
|
/* Start DSI PLL */
|
|
writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
|
|
/* Reset DSI PLL */
|
|
writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
|
|
for (i = 0; i < 10; i++) {
|
|
if ((readl(PRCM_PLLDSI_LOCKP) &
|
|
PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
/* Release DSIPLL_RESETN */
|
|
writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
|
|
return 0;
|
|
}
|
|
|
|
int db5500_prcmu_disable_dsipll(void)
|
|
{
|
|
/* Disable dsi pll */
|
|
writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
|
|
/* Disable escapeclock */
|
|
writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
|
|
return 0;
|
|
}
|
|
|
|
int db5500_prcmu_set_display_clocks(void)
|
|
{
|
|
/* HDMI and TVCLK Should be handled somewhere else */
|
|
/* PLLDIV=8, PLLSW=2, CLKEN=1 */
|
|
writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
|
|
/* PLLDIV=14, PLLSW=2, CLKEN=1 */
|
|
writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
|
|
return 0;
|
|
}
|
|
|
|
static void ack_dbb_wakeup(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
|
|
cpu_relax();
|
|
|
|
writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER);
|
|
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
static inline void print_unknown_header_warning(u8 n, u8 header)
|
|
{
|
|
pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
|
|
header, n);
|
|
}
|
|
|
|
static bool read_mailbox_0(void)
|
|
{
|
|
bool r;
|
|
u8 header;
|
|
|
|
header = readb(PRCM_ACK_MB0_HEADER);
|
|
switch (header) {
|
|
case AMB0H_WAKE_UP:
|
|
r = true;
|
|
break;
|
|
default:
|
|
print_unknown_header_warning(0, header);
|
|
r = false;
|
|
break;
|
|
}
|
|
writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
|
|
return r;
|
|
}
|
|
|
|
static bool read_mailbox_1(void)
|
|
{
|
|
writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_2(void)
|
|
{
|
|
writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_3(void)
|
|
{
|
|
writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_4(void)
|
|
{
|
|
writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_5(void)
|
|
{
|
|
u8 header;
|
|
|
|
header = readb(PRCM_ACK_MB5_HEADER);
|
|
switch (header) {
|
|
case MB5H_I2C_READ:
|
|
memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4);
|
|
case MB5H_I2C_WRITE:
|
|
mb5_transfer.ack.header = header;
|
|
mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE);
|
|
complete(&mb5_transfer.work);
|
|
break;
|
|
default:
|
|
print_unknown_header_warning(5, header);
|
|
break;
|
|
}
|
|
writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_6(void)
|
|
{
|
|
writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_7(void)
|
|
{
|
|
writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool (* const read_mailbox[NUM_MB])(void) = {
|
|
read_mailbox_0,
|
|
read_mailbox_1,
|
|
read_mailbox_2,
|
|
read_mailbox_3,
|
|
read_mailbox_4,
|
|
read_mailbox_5,
|
|
read_mailbox_6,
|
|
read_mailbox_7
|
|
};
|
|
|
|
static irqreturn_t prcmu_irq_handler(int irq, void *data)
|
|
{
|
|
u32 bits;
|
|
u8 n;
|
|
irqreturn_t r;
|
|
|
|
bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
|
|
if (unlikely(!bits))
|
|
return IRQ_NONE;
|
|
|
|
r = IRQ_HANDLED;
|
|
for (n = 0; bits; n++) {
|
|
if (bits & MBOX_BIT(n)) {
|
|
bits -= MBOX_BIT(n);
|
|
if (read_mailbox[n]())
|
|
r = IRQ_WAKE_THREAD;
|
|
}
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
|
|
{
|
|
ack_dbb_wakeup();
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
void __init db5500_prcmu_early_init(void)
|
|
{
|
|
tcdm_base = __io_address(U5500_PRCMU_TCDM_BASE);
|
|
spin_lock_init(&mb0_transfer.lock);
|
|
mutex_init(&mb5_transfer.lock);
|
|
init_completion(&mb5_transfer.work);
|
|
}
|
|
|
|
/**
|
|
* prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
|
|
*
|
|
*/
|
|
int __init db5500_prcmu_init(void)
|
|
{
|
|
int r = 0;
|
|
|
|
if (ux500_is_svp() || !cpu_is_u5500())
|
|
return -ENODEV;
|
|
|
|
/* Clean up the mailbox interrupts after pre-kernel code. */
|
|
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
|
|
|
|
r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
|
|
prcmu_irq_thread_fn, 0, "prcmu", NULL);
|
|
if (r < 0) {
|
|
pr_err("prcmu: Failed to allocate IRQ_DB5500_PRCMU1.\n");
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(db5500_prcmu_init);
|