korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-04 01:24:12 +08:00
Code Issues Packages Projects Releases Wiki Activity
e63985ecd2
linux/arch/loongarch/Makefile
Binbin Zhou 5f346a6e59 LoongArch: Allow device trees be built into the kernel 
During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.

We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.

And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-17 12:43:00 +08:00

164 lines
5.3 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
#
# Author: Huacai Chen <chenhuacai@loongson.cn>
# Copyright (C) 2020-2022 Loongson Technology Corporation Limited
boot := arch/loongarch/boot
KBUILD_DEFCONFIG := loongson3_defconfig
KBUILD_DTBS := dtbs
image-name-y := vmlinux
image-name-$(CONFIG_EFI_ZBOOT) := vmlinuz
ifndef CONFIG_EFI_STUB
KBUILD_IMAGE := $(boot)/vmlinux.elf
else
KBUILD_IMAGE := $(boot)/$(image-name-y).efi
endif
#
# Select the object file format to substitute into the linker script.
#
64bit-tool-archpref = loongarch64
32bit-bfd = elf32-loongarch
64bit-bfd = elf64-loongarch
32bit-emul = elf32loongarch
64bit-emul = elf64loongarch
ifdef CONFIG_DYNAMIC_FTRACE
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
CC_FLAGS_FTRACE := -fpatchable-function-entry=2
endif
ifdef CONFIG_64BIT
tool-archpref = $(64bit-tool-archpref)
UTS_MACHINE := loongarch64
endif
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-)
endif
endif
ifdef CONFIG_64BIT
ld-emul = $(64bit-emul)
cflags-y += -mabi=lp64s
endif
cflags-y += -pipe -msoft-float
LDFLAGS_vmlinux += -static -n -nostdlib
# When the assembler supports explicit relocation hint, we must use it.
# GCC may have -mexplicit-relocs off by default if it was built with an old
# assembler, so we force it via an option.
#
# When the assembler does not supports explicit relocation hint, we can't use
# it. Disable it if the compiler supports it.
#
# The combination of a "new" assembler and "old" GCC is not supported, given
# the rarity of this combo and the extra complexity needed to make it work.
# Either upgrade the compiler or downgrade the assembler; the build will error
# out if it is the case (by probing for the model attribute; all supported
# compilers in this case would have support).
#
# Also, -mdirect-extern-access is useful in case of building with explicit
# relocs, for avoiding unnecessary GOT accesses. It is harmless to not have
# support though.
ifdef CONFIG_AS_HAS_EXPLICIT_RELOCS
cflags-y += $(call cc-option,-mexplicit-relocs)
KBUILD_CFLAGS_KERNEL += $(call cc-option,-mdirect-extern-access)
KBUILD_CFLAGS_KERNEL += $(call cc-option,-fdirect-access-external-data)
KBUILD_AFLAGS_MODULE += $(call cc-option,-fno-direct-access-external-data)
KBUILD_CFLAGS_MODULE += $(call cc-option,-fno-direct-access-external-data)
KBUILD_AFLAGS_MODULE += $(call cc-option,-mno-relax) $(call cc-option,-Wa$(comma)-mno-relax)
KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax) $(call cc-option,-Wa$(comma)-mno-relax)
else
cflags-y += $(call cc-option,-mno-explicit-relocs)
KBUILD_AFLAGS_KERNEL += -Wa,-mla-global-with-pcrel
KBUILD_CFLAGS_KERNEL += -Wa,-mla-global-with-pcrel
KBUILD_AFLAGS_MODULE += -Wa,-mla-global-with-abs
KBUILD_CFLAGS_MODULE += -fplt -Wa,-mla-global-with-abs,-mla-local-with-abs
endif
KBUILD_RUSTFLAGS_MODULE += -Crelocation-model=pic
ifeq ($(CONFIG_RELOCATABLE),y)
KBUILD_CFLAGS_KERNEL += -fPIE
KBUILD_RUSTFLAGS_KERNEL += -Crelocation-model=pie
LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs)
endif
cflags-y += $(call cc-option, -mno-check-zero-division)
ifndef CONFIG_KASAN
cflags-y += -fno-builtin-memcpy -fno-builtin-memmove -fno-builtin-memset
endif
load-y = 0x9000000000200000
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y)
drivers-$(CONFIG_PCI) += arch/loongarch/pci/
KBUILD_AFLAGS += $(cflags-y)
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
# This is required to get dwarf unwinding tables into .debug_frame
# instead of .eh_frame so we don't discard them.
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
ifdef CONFIG_ARCH_STRICT_ALIGN
# Don't emit unaligned accesses.
# Not all LoongArch cores support unaligned access, and as kernel we can't
# rely on others to provide emulation for these accesses.
KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
else
# Optimise for performance on hardware supports unaligned access.
KBUILD_CFLAGS += $(call cc-option,-mno-strict-align)
endif
KBUILD_CFLAGS += -isystem $(shell $(CC) -print-file-name=include)
KBUILD_LDFLAGS += -m $(ld-emul)
ifdef need-compiler
CHECKFLAGS += $(shell $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
endif
libs-y += arch/loongarch/lib/
libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
drivers-y += arch/loongarch/crypto/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/loongarch/power/
ifeq ($(KBUILD_EXTMOD),)
prepare: vdso_prepare
vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/loongarch/vdso include/generated/vdso-offsets.h
endif
vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
vmlinuz.efi: vmlinux.efi
vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
install:
$(Q)install -D -m 755 $(KBUILD_IMAGE) $(INSTALL_PATH)/$(image-name-y)-$(KERNELRELEASE)
$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
define archhelp
echo ' install - install kernel into $(INSTALL_PATH)'
echo
endef
Reference in New Issue View Git Blame Copy Permalink