mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
04f175954d
Add support for ADP1050 Digital Controller for Isolated Power Supplies with PMBus interface Voltage, Current and Temperature Monitor. The ADP1050 implements several features to enable a robust system of parallel and redundant operation for customers who require high availability. The device can measure voltage, current and temperature that can be used in different techniques to identify and safely shut down an erroneous power supply in parallel operation mode. Signed-off-by: Radu Sabau <radu.sabau@analog.com> Link: https://lore.kernel.org/r/20240321142201.10330-2-radu.sabau@analog.com [groeck: Fixed corrupted link in documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
65 lines
1.8 KiB
ReStructuredText
65 lines
1.8 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
Kernel driver adp1050
|
|
=====================
|
|
|
|
Supported chips:
|
|
|
|
* Analog Devices ADP1050
|
|
|
|
Prefix: 'adp1050'
|
|
|
|
Addresses scanned: I2C 0x70 - 0x77
|
|
|
|
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf
|
|
|
|
Authors:
|
|
|
|
- Radu Sabau <radu.sabau@analog.com>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
|
|
Controller for Isolated Power Supply with PMBus interface.
|
|
|
|
The ADP1050 is an advanced digital controller with a PMBus™
|
|
interface targeting high density, high efficiency dc-to-dc power
|
|
conversion used to monitor system temperatures, voltages and currents.
|
|
Through the PMBus interface, the device can monitor input/output voltages,
|
|
input current and temperature.
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not auto-detect devices. You will have to instantiate
|
|
the devices explicitly.
|
|
Please see Documentation/i2c/instantiating-devices.rst for details.
|
|
|
|
Platform data support
|
|
---------------------
|
|
|
|
The driver supports standard PMBus driver platform data.
|
|
|
|
Sysfs Attributes
|
|
----------------
|
|
|
|
================= ========================================
|
|
in1_label "vin"
|
|
in1_input Measured input voltage
|
|
in1_alarm Input voltage alarm
|
|
in2_label "vout1"
|
|
in2_input Measured output voltage
|
|
in2_crit Critical maximum output voltage
|
|
in2_crit_alarm Output voltage high alarm
|
|
in2_lcrit Critical minimum output voltage
|
|
in2_lcrit_alarm Output voltage critical low alarm
|
|
curr1_label "iin"
|
|
curr1_input Measured input current.
|
|
curr1_alarm Input current alarm
|
|
temp1_input Measured temperature
|
|
temp1_crit Critical high temperature
|
|
temp1_crit_alarm Chip temperature critical high alarm
|
|
================= ========================================
|